OpenPandora Main OS

The touch screen requires to be used with the stylus or another sharp object. Even if I need to click a desktop icon, and could as well use my finger, the touch screen won't react to my finger at all (even if pressed quite hard).

Hi,

Evince 2.30 often crashes with the following error message:

(evince:2834): EvinceDocument-CRITICAL **: ev_image_save_tmp: assertion `GDK_IS_PIXBUF (pixbuf)' failed

Segmentation fault

How to reproduce: open Evince,  select a PDF file, go into fullscreen mode, then click into the body of the document.

Cheers, Magic Sam

When put into Hold mode, X11 handles the power switch as if it's being pressed, and it generates lots of keypress events, passing them to the foreground application. Since /dev/input/eventX does not seem to continuously trigger, I'm guessing it's due to key repeat.

To reproduce:

• Install xev and open it in the terminal


• Put the power key in HOLD mode


• Notice the "time" value changing rapidly

In addition to causing more work to X, it also floods the active application with key presses, resulting in increased CPU usage. In my test, switching to HOLD while Firefox is in the foreground causes it to use 6% CPU and X an additional 2.5%.

In addition, the key-press events continue even after the switch is taken off HOLD until another key is pressed.

A possible solution to this is to blacklist the power-button event device, to prevent evdev from listening to it (the key is handled by pndevmapperd).

Suspend to RAM uses less power than the low power mode, but the NetworkManager crashes often after the Pandora woke up from suspend to RAM.

This could be fixed with an update of NetworkManager.

Issue: The screen accidentally turns on even when the lid is closed.

How to reproduce: "Screen blanking" must be enabled! Close the lid, wait more than 10 minutes, tap either shoulder button.  This behaviour happens whether on charge or battery, at the desktop or running an application, provided that the "screen blanking" option is enabled.

Desired outcome: When the Pandora comes out of "screen blanking", it should restore the brightness to the same value that it was before blanking.

It looks like XFCE cannot find the icons for links/launchers on the desktop, when the user logs on too quickly. This happens either when the session chooser at start-up is disabled, or when the session is being chosen quickly after the session chooser is being displayed (e.g. by pressing enter as soon as the chooser window pops up). The icons are probably not generated yet at that time point.

A simple workaround is adding the command "xfdesktop --reload" to autostart. Couls this be included in the next SuperZaxxon release or a hotfix?

Right now. the XFCE menu handles right clicks like left clicks. It would be more logical to either not do anything on a right click, or open a context menu that e.g. lets the user generate a link to an application on the desktop.

The XFCE menu does not always show submenues like "Emulators" when being clicked on with the stylus. It only works if the click lasts long or after all menues have been clicked at once with a long click.

Also, tipping on a scroll arrof of menues that are higher than the screen causes the click to be registered as a "click and hold". This leads to the menu being scrolled all the way to the end.

The Wiki states that the Pandora can be used without setting a user password on first boot. But when the password and password confirmation field are left empty, an error pops up saying that there is a password missmatch.

(Please don't fix this bug by just changing the statement in the Wiki ;-)

The sticky keys option is disabling itself for the shift key. It continues to work with the left shoulder button though.

Unfortunately I have no idea what triggers the  sticky option to be disabled. Sometimes it happens after 1-2 minutes, sometimes it takes longer.

I would also like to point out that using the shoulder button instead of the shift button it _not_ an option! This issue has been reported in the forums, but apperantly was never fixed.

When an internet connection was established through a mobile phone (Android, tethering) via bluetooth, the internet connection will not be re-established when the Pandora was sent to sleep and woken up again. The Pandora seems to be connected to the mobile phone, but no internet connection can be established, not even when manually trying to connect. The only way out is to disable bluetooth and enable it again.

I had similar problems with WiFi, before notaz tweaked the system (http://boards.openpandora.org/index.php/topic/11416-wifi-mysteries-resolved-once-and-for-all-—-power-saving-is-clearly-the-culprit/?p=249036).

Hi, sadly the XFCE bluetooth manager seems to have problems with pairing simple SPP devices (an BT GPS mouse here).

1. Enable BT
2. BT Manager -> Add new device
3. Confirm Dialog and wait for scanning
4. Pick device
5. Select PIN options -> "0000" (here for me)
In next step the dialog still asks you to enter a random PIN at your BT device (which is impossible here).

Thus it seems, that the XFCE dialog makes troubles, I tried it with 2 different GPS. Pairing the GPS manually works fine:
sudo rfcomm connect rfcomm0 00:18:E4:26:5F:14

When a Wireless Network that is dropped because its signal strength isn't that good gets reconnected to, I am being asked to re-input the password for that network. It would be nice if it just used the password I gave to it when it was able to connect without popping up that dialog box.

When thee Pandora is shutting down because its almost out of power, it should check to make sure that the nub inputs are set to the default mode (which is mouse movement for the left nub and mouse buttons for the right nub). If not, it should change them to be like that.

As verified with xev, an attached bluetooth keyboard can not generate colon (shift semicolon). xmodmap shows that (unlike a standard Linux system) shift-semicolon is mapped to NoSymbol. While it's find that there's a special symbol to get semicolon on the built-in keyboard, the other binding really should be there in support of attached keyboards.

With SuperZaxxon Final, I've noticed that stuff running on the Pandora like Thunar and bash are seeing a different interpretation of filenames on disk than when I remove the SD card and insert it into my desktop PC.

Specifically, the following two mismatches appear to be present when using a FAT32-formatted SD card:

First, the Pandora's VFAT support seems to be be operating with different case-handling settings than desktop Linux distros.

Filenames set in all uppercase are forced to all-lowercase on the Pandora (whether they're set on the desktop or the Pandora) but inserting the card into a PC reveals that the. All-lowercase filenames set by software on the Pandora risk appearing in all uppercase when the card is inserted into a PC. (I think the grsync PND is what created the files in question)

Among other things, this forces me to use EITHER the PND-based copy of grsync over the network OR a desktop-based copy of rsync with an SD card reader but not both because the kernel will preserve case differences like ALBION.BAT vs. albion.bat but rsync think they are separate files. (resulting in Flash-killing, time-wasting deletion and re-creation)

It also makes for irritating entries like "zzt" in DOSBox or "ddr" in PyDance where I can't capitalize the filename properly without employing Department of Redundancy Department with "DDR Songs" or "ZZT.The.Game" as an excuse for mixed case.

Second, SuperZaxxon Final seems to be using a different (though still Unicode-capable) filename encoding than all the desktop distros I've tried.

Filenames are preserved properly and all-ASCII filenames are displayed properly in all cases, but any non-ASCII characters appear as gibberish on whichever system was not used to set them.

I've confirmed this problem with these two filenames:
- 03 - The Foggy Dew with Sinéad O'Connor.flac
- Lucky Star - Native Misao (Touhou - Native Faith) ???????????????????×??????.mp4

As a Canadian user, my desktops use the "en_CA.utf8" locale and the only other distros I've found which have this problem are Slax and the 1.0 release of its successor, Porteus, both of which use ISO-8859-1 (latin1) for filenames.

I call pnd_run.sh with a pnd. The application directory will invariably be /media/SD/pandora/appdata/<app-id>, no matter if the PXML.xml specifies a different appdata path. Also, the parameter -d for run_pnd.sh is not followed, either.

I tried with vlc.pnd from the app store and with Dosbox74.pnd.

UPDATE: Original submission contained a wrong filename reference. Corrected that typo to the filename intended by the submitter. Admin: porg.

When the taskbar is set to autohide, the Pandora button does not bring up the menu anymore.

Using pygame I try to play a music file starting from some position in the middle::

import pygame
pygame.init()
pygame.mixer.init()

pygame.mixer.music.load('some_file.ogg')
pygame.mixer.music.play(0,60)

This should start playing the file from the firs minute, instead on the pandora the file plays from the start.

I've tried the same code in a debian (sid) chroot (from extend utils) and it works correctly, as it does on my pc (debian wheezy).

I suspect that the issue may be present also in .next (I've done a very quick test on a friend's pandora).

Some relevant version numbers:

* libogg.so.0.6.0 (on debian libogg.so.0.8.0)
* libSDL_mixer-1.2.so.0.10.1 (on debian libSDL_mixer-1.2.so.0.12.0)

If a PND has been run as root before (using pnd_run.sh from a root shell) and afterwards it is invoked the normal way, the PND doesn't start, because the .out file cannt be overwritten:

/usr/pandora/scripts/pnd_run.sh: line 26: /tmp/pndrun_firefox.out: Permission denied

Desired solution:
.out file is silently overwitten.
Maybe, if that's not possible, create another .out file with a different name (added counter, for example).

Seen in SuperZaxxon relese 1.5, not in Beta3 as this task is flagged, but there is no choice besides Beta3.

In GTK applications, such as Truecrypt, NoteCase Pro or Mousepad, the file open / file save dialogs have shortcuts to mounted file systems on the left side.
If clicking such a shortcut entry, the corresponding file system's contents are shown in the right dialog pane.
This works for file systems, which were available at boot time.
For file systems mounted after booting, e.g. by inserting an SD card or connecting a USB drive, when clicking such an entry, an error message appears saying
"Could not mount [volumen name]
Failed to execute child process 'gnome-mount' (No such file or directory)"

This is healed by
sudo opkg install gnome-mount
(which instals gnome-mount, nautilus, gvfsd-ftp, gvfs (upgrade), and a lot of libs (upgrades)..

This has been seen in SuperZaxxon release 1.5, not in Beta3 (but Beta3 is the only choice in Flyspray's dropdown currently).

I reported that error for HF6 I think, and it seemed to be fixed in SuperZaxxon Beta5. A regression?

Since the default inputrc doesn't contain any functionality (simple cli movements like ctrl-left or crtrl-right to skip words don't work) this diff may be useful to add to the cli-experience. I've also been trying to get the delete-key to work, but this is apparently already a known issue (see FS#227). I can remove this from the diff if you want. (I couldn't attach a file to the task somehow)

31,32c31,33
< # "\e[3~": delete-char
< # "\e[2~": quoted-insert
---
> #"\e[3~": delete-char
> "\e[^?": delete-char
> "\e[2~": quoted-insert
44,47c45,50
< # "\e[5C": forward-word
< # "\e[5D": backward-word
< # "\e\e[C": forward-word
< # "\e\e[D": backward-word
---
> "\e[1;5C": forward-word
> "\e[1;5D": backward-word
> "\e[5C": forward-word
> "\e[5D": backward-word
> "\e\e[C": forward-word
> "\e\e[D": backward-word

STATUS QUO:

If you are in XFCE and hold the power slider for 3 seconds, you thereby trigger the shutdown command.
For 3 more seconds a dialogue box gives you the chance to abort the shutdown ("Shutting down in 3…2…").

Now in MiniMenu no direct shutdown key is available. You first have to quit the running app (via PANDORA key), then call up the menu (via SELECT key), and then navigate to "Shutdown" and confirm it (by B or ENTER).

INQUIRED BEHAVIOR:

1) Thanks to the very recent MiniMenu speedups, these 4 consecutive user interaction steps can now at least be be executed a lot faster.
Nevertheless, offering a 1-button-interaction (via power slider) too, would be nice. Could you please make that available to MiniMenu?
And in general: Make this power-slide-event available to any possible GUI, so that not each GUI has to implement this by itself, but rather the OS catches this event and handles it uniformly, except if a certain GUI WANTS to establish an exception to the rule.

2) Also the "Lid-Close-Settings" seem to be ignored by MiniMenu. MiniMenu seems to have the action "Turn off screen" hardcoded to that event. Please make MiniMenu observe the user settings from "Lid-Close-Settings".

RELATED SOURCE CODE FILES (to my knowledge):

op_lid.sh
op_power.sh
op_bright_up.sh
op_bright_down.sh

Thunar takes a long time going back to minimenu on exit. You don't notice this when in XFCE but then you are always in the GUI not returning to it.

This started in Hotfix 6 Alpha4 I believe

I assigned personal subcategories to some of my games.
Some of those subcategories share the same beginning string, i.e: Shooter, ShooterBallistic ShooterScoller.
MiniMenu displays those subcategories with flaws! See the ASCII screenshots below.
Note: The star symbols indicate the currently active selection.

The main category tab "Game" being active:

----------------------------------------------------------
| All | Audio | AudioVideo | Education |*Game*| Graphics |
----------------------------------------------------------
ActionGame AdventureGame ArcadeGame BlocksGame ...
Shooter ShooterBallistic ShooterScroller ...
GameA GameB GameC ...
----------------------------------------------------------

Now if I navigate into the sub-category "Shooter", everything normal:

----------------------------------------------------------
|*Shooter*|
----------------------------------------------------------
.. ShooterA ShooterB ShooterC ...
----------------------------------------------------------

But if I navigate to the sub-category "ShooterBallistic", strangely MiniMenu shows 2 tabs, "Shooter" and "ShooterBallistic", and jumps right into "Shooter".

----------------------------------------------------------
|*Shooter*| ShooterBallistic |
----------------------------------------------------------
.. ShooterA ShooterB ShooterC ...
----------------------------------------------------------

In order to reach my intended tab "ShooterBallistic" I need to navigate to it again. Annoying. There the contents are as expected:

----------------------------------------------------------
| Shooter |*ShooterBallistic*|
----------------------------------------------------------
.. ShooterBallisticA ShooterBallisticB ShooterBallisticC
----------------------------------------------------------

The flaw is the same for all other sub-categories beginning with "Shooter...". All have the flaw as shown in the example "ShooterBallistic", only that it is themselves instead of "ShooterBallistic". One more example to be perfectly clear:

----------------------------------------------------------
| Shooter |*ShooterScroller*|
----------------------------------------------------------
.. ShooterScrollerA ShooterScrollerB ShooterScrollerC
----------------------------------------------------------