All Projects

If the power cable is plugged and the user chooses "Shutdown Pandora" from a menu, there should be a warning that this is without purpose, as the device will automatically restart.

The resulting user choices should be "Cancel shutdown" and "Shutdown nevertheless".

a) Host multiple volumes at once.
b) Select one for hosting first, later host additional ones. (I guess this scenario is more complicated)

FLAWED BEHAVIOUR:

Copy and paste only works between 2 active applications. This is very limiting!
If you are in the single task oriented MiniMenu you have no chance at all to share the clipboard between apps!
If you are in the multi tasking oriented XFCE desktop environment you can only share between apps running in parallel! Not with apps which started after the source app has been terminated.

DESIRED BEHAVIOUR:

The clipboard content (within reasonable limits of course) should remain, regardless of the source application, so that you can paste at any later moment into any application.

The command line environment of the default OS does not include the command "man" and the respective manpages of the installed programs.
I personally often use manpages, as I hardly remember the syntax/arguments of all programs I use.
Having them would be very convenient!

EVALUATING NEEDED STORAGE AMOUNT

Some may argue that storage space is quite limited on the NAND.

Yes I agree. Hence the number of included programs is limited too. Hence it would not be all too many manpages.

When I press TAB into an empty Terminal prompt, I get 1406 possibilities, which is about the amount of available commands/programs if we ignore aliases, etc.

Multiply that with an average of 20 kb per manpage, and you get about 30 MB in total. With compression this could possibly be brought down to 15-20 MB.

POSSIBLE SOLUTIONS

A) Store into the NAND the manpages of core OS CLI programs only, and not all the library/system/etc documentation.

B) Include only the man command into the core OS, and compile/configure it in such a fashion, that it finds the manpages within non-NAND media (SD card, USB volume, etc).
b1) Specify that it simply looks into a certain path within the /media/*/pandora/ structure.
b2) Or offer PND packages like man-core.pnd, man-extended.pnd,... you get the idea or even man-custom.pnd (which would look into its appdata or a certain path for custom added manpages, to somehow get the b1 approach within the PND approach).

Imagine this tab content:
Nubs, Pandora Input, PNDstore.

CURRENT BEHAVIOR:

Pressing "P" and "N" is succession jumps to "Nubs" eventually, as it first jumps to the first "P" item ("Pandora Input"), then to the first "N" item, "Nubs".

DESIRED BEHAVIOR:

That it acts like in most Linux file browsers or the Mac OS X Finder.

In detail: Pressing "P" and "N" within a certain time limit should combine them to the string "PN" and jump to the first item which starts with that string, i.e. "PNDStore". If no item matches, reduce the combination string by one character, try to match again, if that doesn't match, try matching again with one character less, ... , until only one character is left, and if that one doesn't match jump to the nearest previous lexicographical character, which matches.

ISSUE ENVIRONMENT:

If you hold your Pandora in your hands, you only have your thumbs for typing, hence your typing abilities are quite limited.

It is hard to press more than 2 keys, and hard to press 2 keys on the same side, as your second thumb does not reach the opposite side all too easy (except you have a basketball player's hands).

The modifier keys Start/ALT Select/CTRL Pandora/(META, I guess?) are in the middle of the keyboard, hence the can easily pressed together with another key. But SHIFT lies at an ergonomically problematic side (left boundary). Hence hard to press with other left side keys.

SUGGESTED SOLUTION:

I suggest that Pandora OS offers an optional and configurable input help.

[1|2|3 presses | hold for duration x] SHIFT [timeout y] [modifier key 2] [timeout z] key

Produces the same result like SHIFT + modkey2 + key

Very likely modifier key 2 and timeout z are not necessary, as you can trigger the SHIFT hold (by your defined action), and then press the modifier key 2 and the other key at once, as the other modifier keys are laid at a central (ergonomically better) position.

If you set MiniMenu's option "Live (not exit) on app run?" to YES, and you quit an application and return to the still running MiniMenu, it runs in windowed mode, and takes about 2 seconds until it goes into full screen mode again.

This delay should at best be not noticeable at all, at most 0-1 seconds.

I am suggesting the new option "Grid stop horizontal" for MiniMenu with the following possible settings and their effect.

Yes -> If the boundary is reached the focus remains there.
No -> If the boundary is reached the focus starts at the opposite side again.
Jump to next/prev line -> If the boundary is reached the focus jumps to the next/previous line and the opposite side.

PROBLEM DESCRIPTION: In many GUI dialogues the default action button (OK, ACCEPT, YES, …) cannot be triggered with a simple key press. Pressing ENTER triggers the element which has focus (usually the first dialogue element), but not the default action, as most computer users would expect!

MY WORKAROUND MEANWHILE: Press ALT plus the underlined letter of your desired action. But that's not very convenient as the underlined letter needs to be looked upon first, as the button label can differ from situation to situation (ACCEPT, OK, YES, …) and then 2 keys need to be pressed.

SUGGESTED SOLUTION: The custom of many operating systems should be adapted on the OpenPandora as well. SPACE triggers the currently focused element (whatever that may be: list item, radio button, checkbox, etc), and ENTER triggers the default action of that dialogue.
Or even better use the Pandora specific A/B/Y/X keys cleverly in those dialogues/selections. I don't know whether there is a standard functionality assignment within this key-group, in MiniMenu "B" is start/confirm, I do not know of any other standard assignments yet.

SD-Card in Pandora can only be unmounted by guest (uid=1000) but not by jgeiss (uid=1001).

Steps To Reproduce:

Insert SD-Card (or boot with SD-Card inserted),
Login as jgeiss (uid=1001),
Try to unmount SD-Card via XFCE-Popup-Menu (right mouse click on SD-Card-Icon and select unmount).

If you hit the function button, then hit it again to lock the function keys, it doesn't lock the function key.

The delete key, hold shift and hit the back space button, it won't delete, meaning it won't remove the character to the right of the cursor. I saw this on the forum, and confirmed it on my pandora also.

using evdev xorg drivers and not the tslib drivers you can receive pressure axis data however there is
a problem with the values reported by the ads7846 module and the evdev driver has no calibration property for pressure

using
xinput test touchscreen
you can see the pressure axis ranging from 120-ish for hard press to about 150-170 for light press (low pressure values can
be quite erratic)

I could possibly hack the evdev module to possibly do something with this odd and narrow range of values, but I rather think looking
at the source that the ads7846 module needs some work.

is there a git tag that has a known working configuration? as I've had problems getting the kernel to compile the last few times I attempted...

opengles and op_power.sh don't like each other very much.
whenever returning from low power to full power mode again, opengles rendering is just dead.

the reason for this issue are following 2 lines within op_power.sh

18 echo 0 > /sys/devices/platform/omapfb/graphics/fb0/blank
...
66 echo 1 > /sys/devices/platform/omapfb/graphics/fb0/blank

if these lines are removed/commented, the gles rendering just resumes fine.

Problem - Login Screen does not accept all symbols of the form Fn+char
Reproducibility - always
Actual results - the characters :?#|$€"‘£¥@!_ do not work on the Login Screen with the Pandora's keyboard. When fn then the corresponding character is pressed, nothing is added to the string.
Expected results - these characters should appear just like any other character
Work Around - an external keyboard was able to enter these characters
Aditional Information - While the characters :?#|$€"‘£¥@!_ do not work, the characters ;/\'-+=`() work just fine.

Zaxxon Hotfix 5.

Example (dropbear is running):

------------------------
~# nc -vvvv localhost 22
Notice: Real hostname for localhost [127.0.0.1] is localhost.localdomain
Total received bytes: 0
Total sent bytes: 0

~# telnet localhost 22
SSH-2.0-dropbear_0.51
------------------------

All required libraries seem present, strace output is inconclusive.

It'll have to be in the SKEL.
/etc/skel/Applications/Settings/Thunar/uca.xml

People can replace the contents of their current uca.xml file with the following to gain this functionality now.
/home/[USERNAME]/Applications/Settings/Thunar/uca.xml

<?xml encoding="UTF-8" version="1.0"?>
<actions>
<action>
<icon>Terminal</icon>
<name>Open Terminal Here</name>
<command>exo-open --working-directory %f --launch TerminalEmulator</command>
<description>Example for a custom action</description>
<patterns>*</patterns>
<directories/>
</action>
<action>
<icon>emblem-symbolic-link</icon>
<name>Mount PND</name>
<command>/usr/pandora/scripts/pnd_run.sh -p %f -m &amp;&amp; thunar /mnt/utmp/</command>
<description></description>
<patterns>*.pnd;*.PND</patterns>
<other-files/>
<text-files/>
</action>
<action>
<icon>gtk-jump-to-rtl</icon>
<name>Unmount PND</name>
<command>/usr/pandora/scripts/pnd_run.sh -p %f -u</command>
<description></description>
<patterns>*.pnd;*.PND</patterns>
<other-files/>
<text-files/>
</action>
</actions>

Should make up a simple zenity script tool ..

- backup -> pick SD -> backs up current user's homedor to SD. (tar.gz format so permissions can be kept; not cpio/etc, too annoying for user.) -> keep rolling, or just one copy?
- restore -> pick SD -> pick user -> confirm -> wipe home and restore with version from tarball? (or just unpack in-place, so existing new files are kept)
-> prepare SD -> pick SD -> mkdir /pandora/menu and /pandora/desktop

http://www.wader-project.org
http://trac.wader-project.org
http://trac.wader-project.org/wiki/Developers

this would be really usefull to monitor reception/network of mobile broadband dongle and it also counts ur mobile data usage (for those that have limits).

That still need to be configurable, but chris_c does a good job I'ld like to see integraded in the main image :
http://www.gp32x.com/board/index.php?/topic/58794-a-script-to-shutdown-after-charging/
and :
http://chrisc.bedroomcoders.co.uk/?p=77

Ok, I just want to say that there is something missing about the font on the base image. I cant get what (at least for now)

Here is an issue : http://www.gp32x.com/board/index.php?/topic/54282-getting-vnc-viewer-to-work/

With my current Ogre build I get :
Warning: Unable to load any usable ISO8859 font
Error: Aborting: no font found

I've googled but so far no solution :(

Try clearing shortcuts in Start->Settings->Window Manager->Keyboard. That doesn't work (for me).
This is a problem because these shortcuts are blocking key-combination in apps, like for example the keymapper in dosbox (CTRL+F1) or refreshing content (CTRL+F5). I tried manual editing or even deleting the configuration file, but changes are not recognized and the file recreated on reboot.

The patch implementing screen blanking uses the /usr/pandora/scripts/op_lid.sh script to control LCD backlit:
http://git.openpandora.org/cgi-bin/gitweb.cgi?p=openembedded.git;a=blob;f=recipes/xorg-driver/xf86-video-omapfb/pandora_backlight_dim.patch;h=4a0b8432d083c6e7297192a2920c7a777ae3d098;hb=16f3fff44323bd6b4349d909667b51a2fef3f278

The same result can be achieved by using the sys interface:
/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/bl_power

This approach makes driver independent on particular distribution. The proposed patch is attached.

I am running PandoraOS from sd-card installed with the official tarball "pandora-rootfs.tar.bz2".

I noticed that the control/keyboard-mapping in vi does not work correctly after switching to root (for example sudo su-). I solved this by copying over my users .vimrc to root-homedir. This should already be included in the tarball.

When booting the pandora-OS from sd-card by using the official tar, you will end up with your sd-card being mounted twice: once as / and once as /media/<label>. I solved this by adding "/dev/mmcblk0" to "/etc/udev/mount.blacklist". Maybe this should be added to the default tarball? I'm not sure as it might be used in other ways maybe (beside SD-card-installation)?

Background: I ran "updatedb" as root and have been notified by a message that there was a mount-loop. After adding the above modification the system still booted fine and "updatedb" ran nicely without a warning.

With both Hotfix 3 and Hotfix 4 Beta the Run PND Application menu item fails to do anything.

Possibly related problem is that PND files newly copied to SD card are not recognized and entered on desktop as expected.
When you go to Thunar and right click - execute the PND file, nothing happens.
Possible fix by copying the PND to another folder on the SD card with Thunar.
This makes at least two PND files I had work.

Still no response with "Run PND Application" menu, though.