All Projects

If you boot the system with the lid closed, the backlight will still be on when you get to the desktop. You have to lift the lid for an instant and then close again to shut it off. Perhaps this is because of the lack of trigger for an interrupt since the sensor is already activated. Can there be one extra check of the lid sensor after boot to cover this static position?

Battery remaining percentage in MiniMenu does not update unless you change tabs back and forth.

This is only really an issue when leaving the unit charging and not using it. It gives the appearance that it is not charging until you swap tabs around.

PyGame is damn slow (games with scrolling are not at all playable).
Would be nice if Hardware surface could be used :)

The title says everything: The 'del' key does not work. In theory you should have a del "event" when hitting shift+backspace. This is not the case in all progs I tested so far (terminal and default text editor with gui).

cat >/etc/ld.so.conf<<END
/lib
/usr/lib
END

ldconfig

When a X window which is displaying GLES2 render output is:
- Either dragged out of the visibile screen region (?)
- Is made larger than it was at the creation time of the GLES2 context
then:
- The performance will drop significantly as the EGL buffer swaps won't occur as fast as before,
- The render output will be corrupted and flicker
- In rare occasions crashes the application or locks up the entire system (which forces you to remove the battery)

The problem can not be solved without restarting the application (Possibly forcing players to complete the same goals again as they were unable to reach a savepoint or similar things).

This was confirmed in Mupen64Plus and the PowerVR GLES Samples and some of my own projects (which are, however, based on the PowerVR samples).
As I didn't see any other reports about this problems (but had it confirmed by other Pandora users too) I would expect that it can be fixed by using a newer X, kernel or combination of them as other OMAP users would be effected too.

Found I'd kept some notes about making the Pandora's wake on alarm function work...

drivers/rtc/rtc-twl4030.c

twl4030_rtc_remove (for when the driver is removed) and twl4030_rtc_
shutdown (for when the system is shutdown) functions need to change. Or at least the shut down does.

oh YUK who's been using goto....

changes in drivers/rtc/rtc-twl4030.c

twl4030_rtc_remove
commented out //mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);

twl4030_rtc_shutdown
replaced
// mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
// BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
with
mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);

twl4030_rtc_suspend
replaced
// mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
// BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
with
mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);

twl4030_rtc_init
added (before return!)
twl4030_rtc_alarm_irq_set_state(true);

Should probably check reg 0x2B with mask 0x08 to see if alarm should be left enabled or not ?
but only in twl4030_rtc_shutdown and ?remove? NOT in twl4030_rtc_init
should remove ever happen ???

I'm guessing it's best to not enable the alarm irq's all the time???

I found a bug when I tried to debug my code with strace.

It happens when strace has to handle conditional SWI's.

Example: (ASM code) save as "condswi.s"
-----
.data
.text
_globl _start
_start:
mov r0,#0 @ return code
mov r7,#1 @ sys_exit
swine 0
swieq 0
.end
-----

The code assembles/links fine using 'as' and 'ld'.
> as condswi.s
> ld a.out -o condswi

When I want to strace the executable file I got the following error.
> strace ./condswi
'syscall: unknown syscall trap 0x1f000000'
As a result strace quits.

Thanks,
Dennis

The update mode functions have moved from the DSS layer to omapfb implementaion.
This patch exports the new function symbols for use by the TI drivers.

--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -22,6 +22,7 @@

#include <linux/fb.h>
#include <linux/device.h>
+#include <linux/module.h>
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <linux/mm.h>
@@ -359,6 +360,7 @@ int omapfb_set_update_mode(struct fb_info *fbi,

return r;
}
+EXPORT_SYMBOL(omapfb_set_update_mode);

int omapfb_get_update_mode(struct fb_info *fbi,
enum omapfb_update_mode *mode)
@@ -381,6 +383,7 @@ int omapfb_get_update_mode(struct fb_info *fbi,

return 0;
}
+EXPORT_SYMBOL(omapfb_get_update_mode);

/* XXX this color key handling is a hack... */
static struct omapfb_color_key omapfb_color_keys[2];

The last release of TI Graphics SDK Product to support the 1.0.3 SGX core is 4.04.00.03
The overlay needs to peg the package selection to this version.

This patch when applied aginst TI 4.04.00.03 SGX drivers will allow building the pvr kernel modules.
This relies on task 272 (kernel patch) and should be used inconjuction with task 273

diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_displayclass.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_displayclass.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_displayclass.c 2011-06-20 21:03:33.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_displayclass.c 2012-02-09 08:37:21.000000000 +1100
@@ -830,7 +830,11 @@
unsigned long ulLCM;
unsigned uiFBDevID = psDevInfo->uiFBDevID;

+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_lock();
+#else
acquire_console_sem();
+#endif

psLINFBInfo = registered_fb[uiFBDevID];
if (psLINFBInfo == NULL)
@@ -972,7 +976,11 @@
ErrorModPut:
module_put(psLINFBOwner);
ErrorRelSem:
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_unlock();
+#else
release_console_sem();
+#endif

return eError;
}
@@ -982,7 +990,11 @@
struct fb_info *psLINFBInfo = psDevInfo->psLINFBInfo;
struct module *psLINFBOwner;

+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_lock();
+#else
acquire_console_sem();
+#endif

psLINFBOwner = psLINFBInfo->fbops->owner;

@@ -993,7 +1005,11 @@

module_put(psLINFBOwner);

+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_unlock();
+#else
release_console_sem();
+#endif
}

static OMAPLFB_DEVINFO *OMAPLFBInitDev(unsigned uiFBDevID)
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_linux.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_linux.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_linux.c 2011-06-20 21:03:33.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_linux.c 2012-02-09 13:14:28.000000000 +1100
@@ -24,11 +24,14 @@
*
******************************************************************************/

+
+#include <linux/version.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
+#endif

-#include <linux/version.h>

#include <asm/atomic.h>

@@ -236,8 +239,11 @@
struct fb_var_screeninfo sFBVar;
int res;
unsigned long ulYResVirtual;
-
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_lock();
+#else
acquire_console_sem();
+#endif

sFBVar = psDevInfo->psLINFBInfo->var;

@@ -268,31 +274,37 @@
printk(KERN_INFO DRIVER_PREFIX ": %s: Device %u: fb_pan_display failed (Y Offset: %lu, Error: %d)\n", __FUNCTION__, psDevInfo->uiFBDevID, psBuffer->ulYOffset, res);
}
}
-
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_unlock();
+#else
release_console_sem();
+#endif
}

OMAPLFB_UPDATE_MODE OMAPLFBGetUpdateMode(OMAPLFB_DEVINFO *psDevInfo)
{
struct omap_dss_device *psDSSDev = fb2display(psDevInfo->psLINFBInfo);
OMAP_DSS_DRIVER(psDSSDrv, psDSSDev);
-
- enum omap_dss_update_mode eMode;
-
- if (psDSSDrv == NULL || psDSSDrv->get_update_mode == NULL)
- {
- DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Can't get update mode\n", __FUNCTION__, psDevInfo->uiFBDevID));
- return OMAPLFB_UPDATE_MODE_UNDEFINED;
+ if (psDSSDrv == NULL || psDSSDev == NULL)
+ {
+ DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: No DSS device\n", __FUNCTION__, psDevInfo->uiFBDevID));
+ }
+ enum omapfb_update_mode eMode;
+
+ if (!omapfb_get_update_mode(psDevInfo->psLINFBInfo, &eMode))
+ {
+// DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Can't get update mode\n", __FUNCTION__, psDevInfo->uiFBDevID));
+ return OMAPLFB_UPDATE_MODE_AUTO;
+// return OMAPLFB_UPDATE_MODE_UNDEFINED;
}

- eMode = psDSSDrv->get_update_mode(psDSSDev);
switch(eMode)
{
- case OMAP_DSS_UPDATE_AUTO:
+ case OMAPFB_AUTO_UPDATE:
return OMAPLFB_UPDATE_MODE_AUTO;
- case OMAP_DSS_UPDATE_MANUAL:
+ case OMAPFB_MANUAL_UPDATE:
return OMAPLFB_UPDATE_MODE_MANUAL;
- case OMAP_DSS_UPDATE_DISABLED:
+ case OMAPFB_UPDATE_DISABLED:
return OMAPLFB_UPDATE_MODE_DISABLED;
default:
DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Unknown update mode (%d)\n", __FUNCTION__, psDevInfo->uiFBDevID, eMode));
@@ -307,10 +319,10 @@
{
struct omap_dss_device *psDSSDev = fb2display(psDevInfo->psLINFBInfo);
OMAP_DSS_DRIVER(psDSSDrv, psDSSDev);
- enum omap_dss_update_mode eDSSMode;
+ enum omapfb_update_mode eDSSMode;
int res;

- if (psDSSDrv == NULL || psDSSDrv->set_update_mode == NULL)
+ if (psDSSDrv == NULL)
{
DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Can't set update mode\n", __FUNCTION__, psDevInfo->uiFBDevID));
return OMAPLFB_FALSE;
@@ -319,20 +331,20 @@
switch(eMode)
{
case OMAPLFB_UPDATE_MODE_AUTO:
- eDSSMode = OMAP_DSS_UPDATE_AUTO;
+ eDSSMode = OMAPFB_AUTO_UPDATE;
break;
case OMAPLFB_UPDATE_MODE_MANUAL:
- eDSSMode = OMAP_DSS_UPDATE_MANUAL;
+ eDSSMode = OMAPFB_MANUAL_UPDATE;
break;
case OMAPLFB_UPDATE_MODE_DISABLED:
- eDSSMode = OMAP_DSS_UPDATE_DISABLED;
+ eDSSMode = OMAPFB_UPDATE_DISABLED;
break;
default:
DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Unknown update mode (%d)\n", __FUNCTION__, psDevInfo->uiFBDevID, eMode));
return OMAPLFB_FALSE;
}

- res = psDSSDrv->set_update_mode(psDSSDev, eDSSMode);
+ res = omapfb_set_update_mode(psDevInfo->psLINFBInfo, eDSSMode);
if (res != 0)
{
DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: set_update_mode failed (%d)\n", __FUNCTION__, psDevInfo->uiFBDevID, res));
@@ -441,10 +453,17 @@
OMAPLFB_ERROR OMAPLFBUnblankDisplay(OMAPLFB_DEVINFO *psDevInfo)
{
int res;
-
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_lock();
+#else
acquire_console_sem();
+#endif
res = fb_blank(psDevInfo->psLINFBInfo, 0);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_unlock();
+#else
release_console_sem();
+#endif
if (res != 0 && res != -EINVAL)
{
printk(KERN_WARNING DRIVER_PREFIX
@@ -459,9 +478,17 @@

static void OMAPLFBBlankDisplay(OMAPLFB_DEVINFO *psDevInfo)
{
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_lock();
+#else
acquire_console_sem();
+#endif
fb_blank(psDevInfo->psLINFBInfo, 1);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_unlock();
+#else
release_console_sem();
+#endif
}

static void OMAPLFBEarlySuspendHandler(struct early_suspend *h)
@@ -692,9 +719,17 @@
flush_workqueue(psDevInfo->psSwapChain->psWorkQueue);
}

+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_lock();
+#else
acquire_console_sem();
+#endif
ret = fb_blank(psDevInfo->psLINFBInfo, iFBMode);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_unlock();
+#else
release_console_sem();
+#endif

OMAPLFBCreateSwapChainUnLock(psDevInfo);

@@ -717,7 +752,6 @@
static int __init OMAPLFB_Init(void)
#endif
{
-
if(OMAPLFBInit() != OMAPLFB_OK)
{
printk(KERN_WARNING DRIVER_PREFIX ": %s: OMAPLFBInit failed\n", __FUNCTION__);
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/common/resman.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/common/resman.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/common/resman.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/common/resman.c 2012-02-09 23:33:43.000000000 +1100
@@ -24,15 +24,17 @@
*
******************************************************************************/

+#include <linux/version.h>
#include "services_headers.h"
#include "resman.h"

#ifdef __linux__
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
+#endif

-#include <linux/version.h>
#include <linux/sched.h>
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,9)
#include <linux/hardirq.h>
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/event.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/event.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/event.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/event.c 2012-02-09 09:00:12.000000000 +1100
@@ -24,11 +24,14 @@
*
******************************************************************************/

+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
+#endif

-#include <linux/version.h>
#include <asm/io.h>
#include <asm/page.h>
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22))
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mmap.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mmap.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mmap.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mmap.c 2012-02-09 08:56:41.000000000 +1100
@@ -24,11 +24,14 @@
*
******************************************************************************/

+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
+#endif

-#include <linux/version.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.c 2012-02-09 08:52:48.000000000 +1100
@@ -24,11 +24,14 @@
*
******************************************************************************/

+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
+#endif

-#include <linux/version.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <asm/io.h>
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.h b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.h
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.h 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.h 2012-02-09 08:55:49.000000000 +1100
@@ -27,11 +27,14 @@
#ifndef __IMG_LINUX_MM_H__
#define __IMG_LINUX_MM_H__

+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
+#endif

-#include <linux/version.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/list.h>
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/module.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/module.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/module.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/module.c 2012-02-09 08:59:05.000000000 +1100
@@ -24,9 +24,13 @@
*
******************************************************************************/

+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
+#endif

#if !defined(SUPPORT_DRI_DRM)

@@ -44,7 +48,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/fs.h>
#include <linux/proc_fs.h>

diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.c 2012-02-10 00:24:09.000000000 +1100
@@ -24,10 +24,13 @@
*
******************************************************************************/

+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
-#include <linux/version.h>
+#endif

#include <linux/spinlock.h>
#include <linux/mm.h>
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h 2012-02-09 08:54:31.000000000 +1100
@@ -27,11 +27,13 @@
#ifndef __IMG_LINUX_MUTILS_H__
#define __IMG_LINUX_MUTILS_H__

+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
-
-#include <linux/version.h>
+#endif

#if !(defined(__i386__) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)))
#if defined(SUPPORT_LINUX_X86_PAT)
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/osfunc.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/osfunc.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/osfunc.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/osfunc.c 2012-02-09 09:01:16.000000000 +1100
@@ -24,11 +24,14 @@
*
******************************************************************************/

+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
+#endif

-#include <linux/version.h>
#include <asm/io.h>
#include <asm/page.h>
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22))
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/proc.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/proc.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/proc.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/proc.c 2012-02-09 08:57:49.000000000 +1100
@@ -24,13 +24,16 @@
*
******************************************************************************/

+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
+#endif

#include <linux/init.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_debug.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_debug.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_debug.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_debug.c 2012-02-09 23:54:38.000000000 +1100
@@ -24,9 +24,12 @@
*
******************************************************************************/

+#include <linux/version.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
+#endif

#include <asm/io.h>
#include <asm/uaccess.h>
@@ -72,7 +75,7 @@
static PVRSRV_LINUX_MUTEX gsDebugMutexNonIRQ;

-static spinlock_t gsDebugLockIRQ = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(gsDebugLockIRQ);

#if !defined (USE_SPIN_LOCK)
#define USE_SPIN_LOCK (in_interrupt() || !preemptible())
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_drm.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_drm.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_drm.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_drm.c 2012-02-16 01:58:14.000000000 +1100
@@ -26,14 +26,16 @@

#if defined(SUPPORT_DRI_DRM)

+#include <linux/version.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
+#endif

#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <linux/sched.h>
@@ -371,11 +373,23 @@
.poll = drm_poll,
.fasync = drm_fasync,
},
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,38))
.pci_driver =
{
.name = PVR_DRM_NAME,
.id_table = asPciIdList,
},
+#else
+ .kdriver =
+ {
+ PVR_DRM_NAME,
+ asPciIdList,
+ },
+// {
+// .pci->name = PVR_DRM_NAME,
+// .pci->id_table = asPciIdList,
+// },
+#endif

.name = PVR_DRM_NAME,
.desc = PVR_DRM_DESC,
@@ -385,6 +399,13 @@
.patchlevel = PVRVERSION_BUILD,
};

+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39))
+static struct pci_driver pci_pvr_driver = {
+ .name = PVR_DRM_NAME,
+ .id_table = asPciIdList,
+};
+#endif
+
static int __init PVRSRVDrmInit(void)
{
int iRes;
@@ -401,7 +422,11 @@
}
#endif

+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,38))
iRes = drm_init(&sPVRDrmDriver);
+#else
+ iRes = drm_pci_init(&sPVRDrmDriver,&pci_pvr_driver);
+#endif
#if defined(PVR_DRI_DRM_NOT_PCI)
if (iRes != 0)
{
@@ -413,7 +438,11 @@

static void __exit PVRSRVDrmExit(void)
{
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,38))
drm_exit(&sPVRDrmDriver);
+#else
+ drm_pci_exit(&sPVRDrmDriver,&pci_pvr_driver);
+#endif

#if defined(PVR_DRI_DRM_NOT_PCI)
drm_pvr_dev_remove();
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_uaccess.h b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_uaccess.h
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_uaccess.h 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_uaccess.h 2012-02-09 08:51:21.000000000 +1100
@@ -27,11 +27,14 @@
#ifndef __PVR_UACCESS_H__
#define __PVR_UACCESS_H__

+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
+#endif

-#include <linux/version.h>
#include <asm/uaccess.h>

static inline unsigned long pvr_copy_to_user(void __user *pvTo, const void *pvFrom, unsigned long ulBytes)

FAAD2 appears to not be compiled with fixed point decoding. My version of libfaad compiled with fixed point used 2-3x less cpu than the provided one. It's not enough to provide the switch to the configure script. the file libfaad/common.h has to be edited and a define uncommented. Line 68 in the v2.7 source.

/* COMPILE TIME DEFINITIONS */

/* use double precision */
/* #define USE_DOUBLE_PRECISION */
/* use fixed point reals */
//#define FIXED_POINT <<<<<------------

I added:
iface usb0 inet dhcp

And ran:
ifup usb0

But dhclient simply prints usage.

When the Pandora runs out of memory and the Out-Of-Memory killer fires, the Applications/Settings/xfce4/panel/panels.xml loses the entries for the menu button and the power monitor.

On OS Zaxon (hotfix 3).

With "xfconf-query", the resolution is 800x480@60 Hz.
But with the tool in the menu "Settings" -> "Display", the resolution is 800x480@0 Hz.

With Java (opensdk-6-jre 6b18-1.8),

GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayModes()

return 1 display mode that is 800x480@0 Hz with a BPP of -1.

It seems to be the reason that GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayMode() return null
and when closing a java application that goes in fullscreen mode to throw an exception (invalid display mode).

With both Hotfix 3 and Hotfix 4 Beta the Run PND Application menu item fails to do anything.

Possibly related problem is that PND files newly copied to SD card are not recognized and entered on desktop as expected.
When you go to Thunar and right click - execute the PND file, nothing happens.
Possible fix by copying the PND to another folder on the SD card with Thunar.
This makes at least two PND files I had work.

Still no response with "Run PND Application" menu, though.

When booting the pandora-OS from sd-card by using the official tar, you will end up with your sd-card being mounted twice: once as / and once as /media/<label>. I solved this by adding "/dev/mmcblk0" to "/etc/udev/mount.blacklist". Maybe this should be added to the default tarball? I'm not sure as it might be used in other ways maybe (beside SD-card-installation)?

Background: I ran "updatedb" as root and have been notified by a message that there was a mount-loop. After adding the above modification the system still booted fine and "updatedb" ran nicely without a warning.

I am running PandoraOS from sd-card installed with the official tarball "pandora-rootfs.tar.bz2".

I noticed that the control/keyboard-mapping in vi does not work correctly after switching to root (for example sudo su-). I solved this by copying over my users .vimrc to root-homedir. This should already be included in the tarball.

The patch implementing screen blanking uses the /usr/pandora/scripts/op_lid.sh script to control LCD backlit:
http://git.openpandora.org/cgi-bin/gitweb.cgi?p=openembedded.git;a=blob;f=recipes/xorg-driver/xf86-video-omapfb/pandora_backlight_dim.patch;h=4a0b8432d083c6e7297192a2920c7a777ae3d098;hb=16f3fff44323bd6b4349d909667b51a2fef3f278

The same result can be achieved by using the sys interface:
/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/bl_power

This approach makes driver independent on particular distribution. The proposed patch is attached.

Try clearing shortcuts in Start->Settings->Window Manager->Keyboard. That doesn't work (for me).
This is a problem because these shortcuts are blocking key-combination in apps, like for example the keymapper in dosbox (CTRL+F1) or refreshing content (CTRL+F5). I tried manual editing or even deleting the configuration file, but changes are not recognized and the file recreated on reboot.

Ok, I just want to say that there is something missing about the font on the base image. I cant get what (at least for now)

Here is an issue : http://www.gp32x.com/board/index.php?/topic/54282-getting-vnc-viewer-to-work/

With my current Ogre build I get :
Warning: Unable to load any usable ISO8859 font
Error: Aborting: no font found

I've googled but so far no solution :(

Zaxxon Hotfix 5.

Example (dropbear is running):

------------------------
~# nc -vvvv localhost 22
Notice: Real hostname for localhost [127.0.0.1] is localhost.localdomain
Total received bytes: 0
Total sent bytes: 0

~# telnet localhost 22
SSH-2.0-dropbear_0.51
------------------------

All required libraries seem present, strace output is inconclusive.

Problem - Login Screen does not accept all symbols of the form Fn+char
Reproducibility - always
Actual results - the characters :?#|$€"‘£¥@!_ do not work on the Login Screen with the Pandora's keyboard. When fn then the corresponding character is pressed, nothing is added to the string.
Expected results - these characters should appear just like any other character
Work Around - an external keyboard was able to enter these characters
Aditional Information - While the characters :?#|$€"‘£¥@!_ do not work, the characters ;/\'-+=`() work just fine.

opengles and op_power.sh don't like each other very much.
whenever returning from low power to full power mode again, opengles rendering is just dead.

the reason for this issue are following 2 lines within op_power.sh

18 echo 0 > /sys/devices/platform/omapfb/graphics/fb0/blank
...
66 echo 1 > /sys/devices/platform/omapfb/graphics/fb0/blank

if these lines are removed/commented, the gles rendering just resumes fine.

using evdev xorg drivers and not the tslib drivers you can receive pressure axis data however there is
a problem with the values reported by the ads7846 module and the evdev driver has no calibration property for pressure

using
xinput test touchscreen
you can see the pressure axis ranging from 120-ish for hard press to about 150-170 for light press (low pressure values can
be quite erratic)

I could possibly hack the evdev module to possibly do something with this odd and narrow range of values, but I rather think looking
at the source that the ads7846 module needs some work.

is there a git tag that has a known working configuration? as I've had problems getting the kernel to compile the last few times I attempted...