|
36 | Core | Bug Report | Low | X doesn't restart in No-X mode (pnd_run.sh) | Closed | |
Task Description
At the end of the script, it calls /etc/init.d/slim-init-init start
If you fix that to /etc/init.d/slim-init start , X restarting works again.
Please apply this fix into the GIT. |
|
125 | Core | Bug Report | Low | wrong error handling in wl1251 platform initilization | Closed | |
Task Description
in
http://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blob;f=arch/arm/mach-omap2/board-omap3pandora.c;h=c6637426bf3a61f5bd0f85338304d0d8d114f67d;hb=HEAD
I see:
555 ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
556 if (ret < 0)
557 goto fail_nreset;
the goto should go to: fail_irq instead of fail_nreset
Denis |
|
308 | Core | Bug Report | Low | Wireless Network being dropped asks for password | Unconfirmed | |
Task Description
When a Wireless Network that is dropped because its signal strength isn't that good gets reconnected to, I am being asked to re-input the password for that network. It would be nice if it just used the password I gave to it when it was able to connect without popping up that dialog box. |
|
313 | Core | Bug Report | Low | WiFi LED Not Triggered on First Activation | Closed | |
Task Description
The first time WiFi is enabled after boot, using either the the config button menu or the Toggle WiFi menu option the WiFi LED does not light up. (though the WiFi itself does work)
Once it has been enabled and disabled for the first time, it will work normally for subsequent uses of the WiFi toggle.
If the Toggle WiFi script is launched for the first time from the terminal the LED does light up.
This is the case in SuperZaxxon 1.53 with all current upgrades applied, and reportedly since the introduction of SuperZaxxon.
checking /sys/class/leds/pandora::wifi/trigger while the WiFi is enabled but the LED off shows that the trigger has been successfully set to phy0radio
Also noted while investigating this:
If Wifi is enabled for the first time from the terminal the following errors are generated by /etc/init.d/wl1251-init
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
Usage: insmod filename [args]
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
The commands that generate these errors are only executed if the mac80211 module is not already loaded - and that module is not unloaded when wifi is disabled. This seems to be unrelated to the issue being reported, however I can't see any cause for the issue at all, so I figured it was worth including it in the report anyway. |
|
144 | Core | Bug Report | Low | Wifi LED does not always get re-activated after enablin ... | Closed | |
Task Description
Wifi LED does not always get re-activated after enabling wifi.
It seems that the led trigger which ought to be set to [phy0dadio] no longer exists and the phy# seems to increment (up to at least 11 I have observed)
If I set the trigger to phy##radio then the notification works again, but I'm not sure of the best way to fix this. I suppose a quick hack to the wl1251-init script is the place to start. |
|
165 | Core | Bug Report | Low | VPNC does't work | Closed | |
Task Description
vpnc doesn't work |
|
203 | Core | Bug Report | Low | Video-out setting window does not exit on OK | Closed | |
Task Description
The "video-out" window opens again if you choose OK button. |
|
13 | Core | To Do (Reminder) | Low | verify pndevmapperd is invoking scripts | Closed | |
Task Description
menu button is verified
verify power button
verify lid open/close |
|
275 | Core | Feature Request | Low | User should be a member of the cdrom group | Closed | |
Task Description
These permissions are needed for CD/DVD burning/player apps.
From bdc88595d8af726b3bf4745ece310f92299d8759 Mon Sep 17 00:00:00 2001
From: Paul Dersey
Date: Sun, 19 Feb 2012 17:22:41 -0500
Subject: [PATCH] pandora-first-run-wizard: add user to cdrom group
---
recipes/pandora-system/pandora-first-run-wizard.bb | 2 +-
.../pandora-first-run-wizard/first-run-wizard.sh | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/recipes/pandora-system/pandora-first-run-wizard.bb b/recipes/pandora-system/pandora-first-run-wizard.bb
index 904dc4a..a63dc0c 100755
--- a/recipes/pandora-system/pandora-first-run-wizard.bb
+++ b/recipes/pandora-system/pandora-first-run-wizard.bb
@@ -6,7 +6,7 @@ RDEPENDS = "hsetroot zenity dbus pandora-wallpaper-official tslib tslib-calibrat
COMPATIBLE_MACHINE = "omap3-pandora"
-PR = "r28"
+PR = "r29"
SRC_URI = " \
file://first-run-wizard.sh \
diff --git a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
index a801e3f..f30b80e 100755
--- a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
+++ b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
@@ -88,7 +88,7 @@ while ! username=$(zenity --title="Enter your username" --entry --text "Please c
zenity --title="Error" --error --text="Please try again." --timeout 6
done
-while ! useradd -c "$name,,," -G adm,audio,video,netdev,wheel,plugdev,users "$username" ; do
+while ! useradd -c "$name,,," -G adm,audio,cdrom,netdev,plugdev,users,video,wheel "$username" ; do
username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
done
--
1.7.8.3 |
|
224 | Core | Bug Report | Low | Unresponsive start menu since HF5 | Closed | |
Task Description
Since hotfix 5, the start menu often pauses for a few seconds, not letting me select anything or move the mouse.
Other people have reported the issue as well:
http://boards.openpandora.org/index.php?/topic/2295-is-the-xfce-menu-trolling-anyone-else/page__gopid__42559#entry42559 |
|
181 | Application | Bug Report | Low | Triple click in Thunar crash | Closed | |
Task Description
Triple tapping (with the stylus) a directory in Thunar in icon or compact mode (not detail view) causes Thunar to close (crash)
This is consistently repeatable: tapping three times in rapid succession on the same spot of the file causes the crash. It must be the exact same spot, as if double clicking, but a third tap is added. This can be triggered especially when a user becomes frustrated at mistapping, gets carried away, and taps too much. |
|
231 | Core | Bug Report | Low | Touchscreen not accurate on the edges - Calibration doe ... | Closed | |
Task Description
The touchscreen is accurate in the middle of the screen but precision is off by one or more mm near the edges of the screen. Recalibrating and rebooting does not help.
Seems like this is just a permission problem - tslib saves calibration data to /etc/pointercal which is noch writeable for the regular user.
Changing permission on that file to 666 solves this, but i guess starting the calibration tool with root permission (gksu?) would be a better solution. |
|
29 | Core | To Do (Reminder) | Low | ToDo: Map Fn-U and Fn-I with brightness controls | Closed | |
Task Description
Include brightness change hotkeys. |
|
59 | Core | To Do (Reminder) | Low | ToDo: Add joystick / keyboard switch to pnd_run and lib ... | Closed | |
Task Description
The next kernel offers switching between a joystick / keyboard mode.
In joystick mode, the DPAD and ABXYRL Buttons behave like a joystick buttons and have no keyboard mappings.
In keyboard mode, the DPAD and ABXYRL Buttons have keyboard mappings and are NOT registered as joystick.
The normal keyboard keys are not affected by this.
PXML needs to have a switch added for that and pnd_run should change the mode according to that switch.
When the PND app has quit, it should always go back to keyboard mode.
The commands are the following:
echo 1 > /proc/pandora/game_button_mode # keyboard mode
echo 2 > /proc/pandora/game_button_mode # gamepad mode |
|
216 | Application | To Do (Reminder) | Low | ToDo - SD manager tool (backup homedir/restore, prepare... | New | |
Task Description
Should make up a simple zenity script tool ..
- backup -> pick SD -> backs up current user's homedor to SD. (tar.gz format so permissions can be kept; not cpio/etc, too annoying for user.) -> keep rolling, or just one copy?
- restore -> pick SD -> pick user -> confirm -> wipe home and restore with version from tarball? (or just unpack in-place, so existing new files are kept)
-> prepare SD -> pick SD -> mkdir /pandora/menu and /pandora/desktop |
|
269 | Core | Bug Report | Low | Thunar Slow Exit | Unconfirmed | |
Task Description
Thunar takes a long time going back to minimenu on exit. You don't notice this when in XFCE but then you are always in the GUI not returning to it.
This started in Hotfix 6 Alpha4 I believe |
|
157 | Core | Bug Report | Low | Thunar and stilus | Closed | |
Task Description
With Thunar 1.1 and OS Zaxon (hotfix 3) :
- with detail view
- I open Thunar
- I click with the stilus to select the SD card
- I double click with the stilus to open a folder
=> click with the stilus doesn't select file/folder anymore
(I know it is a known bug, but it is not in the list) |
|
321 | Core | Feature Request | Low | Support overriding all category fields with .ovr | Closed | |
Task Description
Currently only the main category and the first sub category of the main category can be overridden using a .ovr file while libpnd uses additional PXML supplied category date to construct the desktop file. This makes it difficult to work with PNDs that supply unwanted data in these additional fields. |
|
300 | Core | Bug Report | Low | SuperZaxxon interprets on-disk FAT32 filenames differen... | Unconfirmed | |
Task Description
With SuperZaxxon Final, I've noticed that stuff running on the Pandora like Thunar and bash are seeing a different interpretation of filenames on disk than when I remove the SD card and insert it into my desktop PC.
Specifically, the following two mismatches appear to be present when using a FAT32-formatted SD card:
First, the Pandora's VFAT support seems to be be operating with different case-handling settings than desktop Linux distros.
Filenames set in all uppercase are forced to all-lowercase on the Pandora (whether they're set on the desktop or the Pandora) but inserting the card into a PC reveals that the. All-lowercase filenames set by software on the Pandora risk appearing in all uppercase when the card is inserted into a PC. (I think the grsync PND is what created the files in question)
Among other things, this forces me to use EITHER the PND-based copy of grsync over the network OR a desktop-based copy of rsync with an SD card reader but not both because the kernel will preserve case differences like ALBION.BAT vs. albion.bat but rsync think they are separate files. (resulting in Flash-killing, time-wasting deletion and re-creation)
It also makes for irritating entries like "zzt" in DOSBox or "ddr" in PyDance where I can't capitalize the filename properly without employing Department of Redundancy Department with "DDR Songs" or "ZZT.The.Game" as an excuse for mixed case.
Second, SuperZaxxon Final seems to be using a different (though still Unicode-capable) filename encoding than all the desktop distros I've tried.
Filenames are preserved properly and all-ASCII filenames are displayed properly in all cases, but any non-ASCII characters appear as gibberish on whichever system was not used to set them.
I've confirmed this problem with these two filenames:
- 03 - The Foggy Dew with Sinéad O'Connor.flac
- Lucky Star - Native Misao (Touhou - Native Faith) ???????????????????×??????.mp4
As a Canadian user, my desktops use the "en_CA.utf8" locale and the only other distros I've found which have this problem are Slax and the 1.0 release of its successor, Porteus, both of which use ISO-8859-1 (latin1) for filenames. |
|
123 | Base OS | Feature Request | Low | Suggestions for the Pandora-Button | New | |
Task Description
My suggestion instead of a full menu, would be to have a tiny overlay over the current running application which allows you to:
- relogin (to close all running applications)
- quit (stop the active application)
- shows the last notifications / toaster messages which you missed while being in a fullscreen app.
- possibly even something like plugin support or icons to check out the wifi-strength etc. from fullscreen apps.
Implementation wise this could possibly be done using
- a topmost window and the same content rendered in screenspace in a GLES hook (which should draw over most applications)
or
- one of the DSS2 overlays maybe
It's definitely something to consider as it was requested on the forums a few times (~"xbox like menu in games"). |
|
324 | Core | Bug Report | Low | Sticky keys setting for shift key disabling itself afte... | Unconfirmed | |
Task Description
The sticky keys option is disabling itself for the shift key. It continues to work with the left shoulder button though.
Unfortunately I have no idea what triggers the sticky option to be disabled. Sometimes it happens after 1-2 minutes, sometimes it takes longer.
I would also like to point out that using the shoulder button instead of the shift button it _not_ an option! This issue has been reported in the forums, but apperantly was never fixed. |
|
312 | Core | Bug Report | Low | Special character in password | Closed | |
Task Description
problem:
setting a username and password using first setup wizzard it's possible to set special character like @#*%/ ect...
the login manager don't support this characters, so you need to reset the device.
possible solution:
1. disable the possibility of setting special characters.
2. implement special characters in login manager. |
|
337 | Core | Bug Report | Low | SPAM | Closed | |
Task Description
SPAM |
|
139 | Base OS | Bug Report | Low | Space should not be accepted in hostname | Closed | |
Task Description
http://www.gp32x.com/board/index.php?/topic/54878-embarassingly-nooby-questions-from-a-new-pandora-owner/page__view__findpost__p__885235
If the user names their Pandora using a space in the name, "This will prevent Xfce from operating correctly". Should trap this when asking for a host name. |
|
77 | Core | Bug Report | Low | Shut down screen | Closed | |
Task Description
The shut down screen says "booting...". :) |
|
202 | Core | Bug Report | Low | Set Date and Time won't let you cancel or close | Closed | |
Task Description
The Date and Time application in MiniMenu by won't let you use the cross or the cancel button to close the application without changing anything.
If you use one of those buttons then a new window opens that says: "Error: Please select a timezone" and equally so for the date and time. |
|
107 | Base OS | Bug Report | Low | Secure Wifi will not connect until XFCE is loaded | Closed | |
Task Description
My Pandora is set to load MiniMenu on boot. I can't use any networked apps because wifi will not automatically connect on boot. XFCE needs to be loaded at least once so that i can enter my keychain password. Once i've entered my password Wifi connects and i can return to MiniMenu. |
|
230 | Core | Bug Report | Low | Second SD slot not working in future kernel version 2.6 ... | Closed | |
Task Description
Sorry, not sure where to log this bug. I have confirmed with aTc on freenode, that SD slot #2 does not work on kernel version 2.6.37 from the openpandora git.
Happy to test anything and reports results. |
|
251 | Core | Feature Request | Low | SD Mass Storage: Possibility to host multiple volumes | Unconfirmed | |
Task Description
a) Host multiple volumes at once.
b) Select one for hosting first, later host additional ones. (I guess this scenario is more complicated) |
|
329 | Core | Bug Report | Low | Screen turns on when LCD closed | Unconfirmed | |
Task Description
Issue: The screen accidentally turns on even when the lid is closed.
How to reproduce: "Screen blanking" must be enabled! Close the lid, wait more than 10 minutes, tap either shoulder button. This behaviour happens whether on charge or battery, at the desktop or running an application, provided that the "screen blanking" option is enabled.
Desired outcome: When the Pandora comes out of "screen blanking", it should restore the brightness to the same value that it was before blanking. |
|
147 | Base OS | Bug Report | Low | Screen backlight is ON when starting with lid closed | Closed | |
Task Description
[HotFix3 installed]
If you power up the Pandora and have the screen closed, the backlight will still go on. That should not happen. Right now you have to open it, close it and than the backlight turns off to save energy... |
|
299 | Core | Bug Report | Low | run_pnd.sh does not follow PXML.xml or "-d"-Parameter | Assigned | |
Task Description
I call pnd_run.sh with a pnd. The application directory will invariably be /media/SD/pandora/appdata/, no matter if the PXML.xml specifies a different appdata path. Also, the parameter -d for run_pnd.sh is not followed, either.
I tried with vlc.pnd from the app store and with Dosbox74.pnd.
UPDATE: Original submission contained a wrong filename reference. Corrected that typo to the filename intended by the submitter. Admin: porg. |
|
75 | Base OS | To Do (Reminder) | Low | Remove application-launcher from Pandora-Button | Closed | |
Task Description
As the Application Launcher takes 12 seconds to load and slows all running games down terribly if you accidentally hit the Pandora-Button, it is useless.
Please change it so it does something different.
My suggestions:
* Open the XFCE Start-Menu
or
* Open a simple applauncher (as suggested by vimacs)
Make sure it doesn't disturb any game or emulator if you press it while playing! |
|
238 | Application | Feature Request | Low | Quick key access to OK in dialogues | Unconfirmed | |
Task Description
PROBLEM DESCRIPTION: In many GUI dialogues the default action button (OK, ACCEPT, YES, …) cannot be triggered with a simple key press. Pressing ENTER triggers the element which has focus (usually the first dialogue element), but not the default action, as most computer users would expect!
MY WORKAROUND MEANWHILE: Press ALT plus the underlined letter of your desired action. But that's not very convenient as the underlined letter needs to be looked upon first, as the button label can differ from situation to situation (ACCEPT, OK, YES, …) and then 2 keys need to be pressed.
SUGGESTED SOLUTION: The custom of many operating systems should be adapted on the OpenPandora as well. SPACE triggers the currently focused element (whatever that may be: list item, radio button, checkbox, etc), and ENTER triggers the default action of that dialogue.
Or even better use the Pandora specific A/B/Y/X keys cleverly in those dialogues/selections. I don't know whether there is a standard functionality assignment within this key-group, in MiniMenu "B" is start/confirm, I do not know of any other standard assignments yet. |
|
117 | Application | Bug Report | Low | Quake1 / Nanogl Lockup | Closed | |
Task Description
After the last TI gles driver update quake1 (vanilla glquake 1 sources) and nanogl started to lockup the pandora after a few minutes of gameplay. Oddly all the other apps using nanogl seem stable.
There is some bad code in nanogl (missing/null function pointers), which I need to clean up and afterwards reevaluate this issue. |
|
168 | Core | Bug Report | Low | qt-embedded doesn't work | Closed | |
Task Description
qt-embedded doesn't work |
|
194 | Core | Bug Report | Low | python ctypes broken (and fix) | Closed | |
Task Description
run python and type import ctypes
cant find _ctypes it says....
for further details and a fix see
http://www.gp32x.com/board/index.php?/topic/57102-python-ctypes-stopped-working/ |
|
88 | Base OS | Feature Request | Low | pydoc is missing | Closed | |
Task Description
I love to use the pandora for some on-the-go python development, and I think I'm not the only one, but unfortunately the module pydoc is missing, which is needed for doing help(sys) on the interactive prompt. Could you please include that in the next firmware revision? Thanks! |
|
303 | Core | Bug Report | Low | pppd 2.4.3 has a bug, recommend upgrade to ppp 2.4.5 | Closed | |
Task Description
pppd 2.4.3 doesnt auto reconnect (in my setup) even if configured to do so (persist). Found a ppp bug report confirming this ( http://ppp.samba.org/cgi-bin/ppp-bugs/resolved?id=1110;user=guest - "ppp-2.4.3 / pppoe not reconnecting") and that it has been fixed. I compiled pppd 2.4.5 and that reconnects just fine. |
|
252 | Core | Feature Request | Low | Power management: If power cable is plugged ignore "Shu... | New | |
Task Description
If the power cable is plugged and the user chooses "Shutdown Pandora" from a menu, there should be a warning that this is without purpose, as the device will automatically restart.
The resulting user choices should be "Cancel shutdown" and "Shutdown nevertheless". |
|
247 | Core | Bug Report | Low | pnd_make.sh can't handle PND with spaces in the path | Closed | |
Task Description
pnd_make.sh can't handle PND with spaces in the path. For example, if the label of the volume where the PND is saved, has spacebars.
The Problem is line 655:
655: PND=$(readlink -f $PND)
Bash handles a path with spacebars as two seperate arguments for the readlink command.
The problem is, that i don't know a solution for this problem. |
|
32 | Core | Bug Report | Low | pndnotifyd: Crawling through directories it shouldn't i ... | Closed | |
Task Description
My current configuration is:
Rootfs on first SD Card, 2nd partition.
If I put my WIZ SD Card with tons of files into the second SD Slot while booting, pndnotifyd eats up about 95% of CPU time.
After about 8 - 9 minutes, it stopped eating the CPU and the system is working normally.
This doesn't happen when I put in the card when XFCE4 is already running.
Using LSOF, I can confirm it's crawling where it shouldn't:
pndnotify 1825 root 6r DIR 179,9 1441792 62488 /media/mmcblk1p1/roms/c64/Tapes
Could it be that on first initialization it hasn't loaded the config and crawls through the whole SD Card?
On a side note: I got 44700 files on that SD Card... so if it needs about 8 minutes, that does mean it can do over 5000 files a minute! |
|
150 | Core | Bug Report | Low | pndnotifyd Segfault | Closed | |
Task Description
Might be related to http://bugs.openpandora.org/index.php?do=details&task_id=128
as it have exactly the same behaviours.
But this time no translation is involved (masked in my script until this is fixed).
And making the file smaller (by removing apps :( ) managed to let it alive, so it seam to be file size related. |
|
22 | Core | Bug Report | Low | pndevmapperd: Powerbutton / hold doesn't work. | Closed | |
Task Description
Moving the powerbutton doesn't get recognized by pndevmapperd.
When moving the powerbutton to hold, it reports:
keyboard.c: can't emulate rawmode for keycode 152 |
|
20 | Core | Bug Report | Low | pndevmapperd: op_lid.sh / op_lidtoggle.sh | Closed | |
Task Description
pndevmapperd tries to run /usr/pandora/scripts/op_lidtoggle.sh, however, the filename is /usr/pandora/scripts/op_lid.sh
Either rename the file or change the call ;) |
|
40 | Core | Bug Report | Low | pmenu doesn't show screenshots | Closed | |
Task Description
I did create some PXML files which have screenshots included.
pmenu seems to ignore them, it just shows a red X. |
|
220 | Core | Feature Request | Low | Please include /usr/bin/xkbset | Closed | |
Task Description
One of the first things after installing HF5 was downloading xkbset, because it is necessary for proper L-R buttons mapping as mouse buttons. Could you please include that in the system?
I am using urjaman's executable from here:
http://www.gp32x.com/board/index.php?/topic/55124-remapping-the-mouse-buttons-etc/page__st__15__p__896576entry896576
Even better would be a GUI that allows mapping of L-R buttons for mouse, just like GUI for nubs :) But including xkbset will be already good. |
|
134 | Core | Bug Report | Low | please add a working phonon backend | Closed | |
Task Description
Please see : http://www.gp32x.com/board/index.php?/topic/54831-minitube/page__view__findpost__p__883993
:) |
|
169 | Core | Bug Report | Low | pidgin freezes all the time | Closed | |
Task Description
pidgin freezes all the time |
|
71 | Core | Bug Report | Low | Permissions of omapdss need to be fixed | Closed | |
Task Description
Only root can currently setup and change TV Out parameters :)
Should be set to make it user-changeable. |