|
327 | Core | Feature Request | Low | Context menu for the XFCE menu | Unconfirmed | |
Task Description
Right now. the XFCE menu handles right clicks like left clicks. It would be more logical to either not do anything on a right click, or open a context menu that e.g. lets the user generate a link to an application on the desktop. |
|
90 | Base OS | Feature Request | Low | Adding more "general libs" to the OS image | Closed | |
Task Description
It would be nice if some more generic libs that could be used by software ported to the Pandora would be available in the base image. For example for Wesnoth we do require these additional libs (names taken from http://www.angstrom-distribution.org/repo/?pkgname=boost ):
* boost-iostreams
* boost-regex
* boost-serialization
Beside this Wesnoth does also require this package (from http://www.angstrom-distribution.org/repo/?pkgname=lua5.1 ):
* lua5.1
In general I would recommend pulling in all of boost. This means the dependencies as well as the recommends. Here is a short paste of what this means:
Depends:
libc6, libstdc++6, libgcc1, boost-filesystem, boost-thread, boost-date-time, boost-system
Recommends:
boost-date-time, boost-filesystem, boost-graph, boost-iostreams, boost-program-options, boost-python, boost-regex, boost-serialization, boost-signals, boost-system, boost-test, boost-thread
There are probably some other packages/lib that might make sense to directly have in the OS image, but they currently don't come to my mind, so I can't list them here. ;) |
|
119 | Base OS | Feature Request | Low | ext4 support | Closed | |
Task Description
Don't know how much work this would be to get a later version of the linux firmware to add this, but it would be nice to have more filesystem support. |
|
171 | Core | Feature Request | Medium | Update clock from hardware when restoring from low powe ... | Closed | |
Task Description
The clock occasionally does weird things during low power mode, sometimes gaining time, sometimes losing. This is most likely a result of the CPU being reduced to 14Mhz and the system clock being unable to keep up.
A convenient work around is to make a call to "/sbin/hwclock --hctosys" during wake-up to load the hardware clock back into the system clock. This may add an extra second or two to the wake-up time but will prevent confusion caused by clock being very incorrect. |
|
234 | Core | Feature Request | Medium | Changeable behaviour when closing the lid | Closed | |
Task Description
As it was requested on forum.gp2x.de and I think it's a good idea I've written some scripts to allow the user to change what happens when the lid is opened/closed.
There are 3 Settings:
-The old behaviour (turning off the screen)
-Go into low power mode
-Shutdown
Default behaviour is still the same: Turn the screen off. Maybe we could change this to low power mode? I don't know.
I made a lot of changes to op_lid.sh: http://pastebin.com/GT3qxWSx (diff: http://pastebin.com/Z8GwpDj8 )
I changed line 11 in op_power.sh to: if [ $powerstate -ne 0 ]; then
And wrote a gui for changing the setting using zenity: http://pastebin.com/9JvSTqfQ
(I still can't upload any files, don't know if it's the fault of my browser, that's why I use this paste service) |
|
279 | Core | Feature Request | Medium | pidgin requires (more) locales to work correctly | Closed | |
Task Description
Please add the following package to allow umlauts working in pidgin:
glibc-gconv-utf-16
After installing this package I no longer have a problem receiving umlauts in pidgin. Besides it might also make sense to add "glibc-gconv-cp1250" which might be required for western europe and koi8-r which seems to be missing for xchat and conversion of chars there.
At the moment the following locale related packages are installed (as of SuperZaxxon Beta3):
glibc-charmap-utf-8 - 2.9-r35.3.5
glibc-gconv - 2.9-r35.3.5
glibc-gconv-cp1252 - 2.9-r35.3.5
glibc-gconv-ibm850 - 2.9-r35.3.5
glibc-gconv-iso8859-1 - 2.9-r35.3.5
glibc-gconv-iso8859-15 - 2.9-r35.3.5
Please add:
glibc-gconv-cp1250
glibc-gconv-koi8-r
glibc-gconv-unicode
glibc-gconv-utf-16
Thanks! |
|
321 | Core | Feature Request | Low | Support overriding all category fields with .ovr | Closed | |
Task Description
Currently only the main category and the first sub category of the main category can be overridden using a .ovr file while libpnd uses additional PXML supplied category date to construct the desktop file. This makes it difficult to work with PNDs that supply unwanted data in these additional fields. |
|
17 | Core | Feature Request | Low | Backlight off when display shuts off | Closed | |
Task Description
Would it be easy to make the backlight shut off when the screen goes off after a period of inactivity? That would save a lot of energy both during the charge cycle and if left on with a battery running.
Thanks! |
|
19 | Core | Feature Request | Low | XFCE-Menu Editor | Closed | |
Task Description
Add an XFCE-Menu Editor (using python).
This way, people can edit the Startmenu :)
http://my.opera.com/Texel/blog/2008/02/20/xfce-applications-menu-editor-0-4 |
|
54 | Core | Feature Request | High | Make it possible to enable / disable keyboard mappings ... | Closed | |
Task Description
Some stuff (UAE4ALL, SuperTux, etc.) is having problems because ABXY and DPAD are mapped to keyboard buttons.
I guess this will lead to more problems in the near future with SDL apps, so it should be configurable to enable / disable the keyboard -> DPAD / ABXY mappings.
Maybe this could be included into libpnd? |
|
61 | Core | Feature Request | Medium | Packages to remove and include | Closed | |
Task Description
The following packages can be removed:
embryo
gnome-games
gnome-games-blackjack
gnome-games-gnometris
gnome-games-iagno
gnome-games-gtali
gnome-games-gnobots2
xmms-mad
But we need the following ones:
xmms-plugin-input-mpg123
xmms-plugin-input-mikmod
mikmod
libxxf86dga1
epdfview
gnumeric (if possible, would be nice)
I do wonder though if we should remove all gnome-games (and ScummVM) completely.
Makes more sense if we wrap those games up as PND files.
Same goes for the community wallpapers. Should we include them? Or save that space for other things? |
|
73 | Base OS | Feature Request | Medium | Nub: Change mouse speed, fix scrolling and add mouse bu ... | Closed | |
Task Description
Currently the nubs can be set to three different modes:
mouse, scroll and absolute
Mode 1 (mouse) works fine, but the speed is a bit slow.
Mode 2 (scroll) has inverted scrolling and it would be nice if scrolling speed would change according to how far you move it
Aditionally, I would suggest adding another mode: mbuttons (Mouse buttons).
At the moment, you can use the nubs as mouse but don't have any mouse buttons.
I think it would be very convenient if you could set the nubs as mouse buttons:
Move the nub left for left click, right for right click, up for double click and down for middle click.
That way, each user could use the left nub for mouse and the right nub for mouse buttons or vice versa. |
|
85 | Core | Feature Request | Low | open lid while in low power mode | Closed | |
Task Description
I'm replying in-forum:
An interesting point -- opening the lid turning the screen on, but you're still in lower power mode. The question then becomes --
Since you enabled low power mode (using the power switch), thats the logical way to un-low power mode.
Two outcomes come to mind ..
When opening the lid, one of:
i) wake up from low power mode, or
ii) Don't turn the screen on when in low power mode
(or a variation of (ii) -- flash a warning "hey, I'm in lower power, bugger off, and hit the power switch")
I can code something in; probably occured due to in my prototype, I broke the power switch, so I didn't use low power mode near the end ;) |
|
122 | Base OS | Feature Request | Medium | SDL 1.2 optimizations | Closed | |
Task Description
At the moment, SDL is a bit slow and has vsync problems (tearing, etc.).
It could need optimizations to use the hardware. |
|
86 | Base OS | Feature Request | Very Low | Including small development frameworks/projects in the ... | Closed | |
Task Description
It could be nice, if some very small development frameworks were included in the OS since the Pandora should make it as easy as possible for beginners to start programming.
That means: A "Start coding now"-wizard/script can be run from the desktop from which you select the type of project (c++, python, SDL...) you want to do. It copies the framework to SD-Card, opens it in an editor/IDE to see the sourcecode and leads you to the first compile and run. Can be combined with a PND-Packer-script.
Ideas for frameworks:
- a small python template (pygame?)
- a template project for an SDL-project (red square in fullscreen)
- a template project for OpenGL ES (a simple colored triangle)
- a template project for using NEON or DSP
- something with a GUI (QT?)
- general HelloWorlds
- all as simple as possible!
I know that this could help many beginners to actually start programming because the first compile is often hardest step (setting up toolchain, hassle with libs, includes, dependencies, compiler options, choice of editor, makefiles, all that stuff).
Feel free to delete this feature request if it doesn't fit into the bugtracker. |
|
88 | Base OS | Feature Request | Low | pydoc is missing | Closed | |
Task Description
I love to use the pandora for some on-the-go python development, and I think I'm not the only one, but unfortunately the module pydoc is missing, which is needed for doing help(sys) on the interactive prompt. Could you please include that in the next firmware revision? Thanks! |
|
96 | Base OS | Feature Request | Low | Customizable SD mount options | Closed | |
Task Description
Right now writes are really slow because they write synchronously: there should be an option to change this so that the user is first taught how to unmount an sd card then remove it... |
|
97 | Base OS | Feature Request | Low | Missing kernel-module-snd-usb-audio | Closed | |
Task Description
Missing kernel-module-snd-usb-audio would be nice to hook the pandora up to my logitec speakers and have audio out and a hub for hooking up other devices at the same time... |
|
103 | Base OS | Feature Request | Low | OpenAL library in firmware? | Closed | |
Task Description
Is there any chance we can have OpenAL installed as a default library? I'm considering porting some software that requires it (and truth be told I manually compiled and installed it for my own use atm...) |
|
108 | Base OS | Feature Request | Critical | TUN/TAN-Driver | Closed | |
Task Description
There is no TUN/TAN Driver installed. This is recommanded for some encrypted wireless lan connections, especially for eduroam, a world wide access point for the education community. Also, a tun-driver is also recommended for vpnc. |
|
111 | Core | Feature Request | Medium | Minimal Boot to X_Term / Pico | Closed | |
Task Description
Can we add an option to the boot menu for a minimal boot to X-term, and include Pico in the base OS?
This would allow us to fix problems we've caused by messing around with starup scripts etc.. |
|
113 | Core | Feature Request | Low | Add aliases for bash, eg ll for ls -l. Just uncommentin ... | Closed | |
Task Description
Aliases like ll for "ls -l" are common. They are super useful on the Pandora (less to type, no Fn key needed).
The .bashrc already includes them but they are commented. Please enabled the ls aliases and colored output. I do not think enabling the "-i" aliases too would be a good idea. |
|
130 | Core | Feature Request | Low | [PATCH] in vsense mbuttons mode down=middle click | Closed | |
Task Description
Patch attached. |
|
133 | Base OS | Feature Request | Low | Add TiMidity++ to OS? | Closed | |
Task Description
Hey, was just wondering if it would be possible to have TiMidity++ (http://timidity.sourceforge.net/) added with a hotfix, would allow games/ports that use it (the Zelda ports here: http://www.gp32x.com/board/index.php?/topic/54633-zelda-kind-of), zdoom and heretic (I think unless pickles has changed them) and other stuff that uses it to not have to include it in the .pnd and saving SD space... just an idea... |
|
137 | Base OS | Feature Request | Low | Default vim config | Closed | |
Task Description
The current vim install does come without any config file. By default this means vim does work in "vi compatible mode" which makes it hardly usable. The attached config file is meant to be used as ~/.vimrc, so it should be added to "/etc/skel/.vimrc". The file is partly based on the default config used by gentoo.
Things this config file sets:
* Start in "vim mode" by default
* activate ruler
* set width of linenumber in ruler
* assume that the terminal uses a dark background
* configure what hitting backspace removed (newlines, ...)
* some magic to have different encoding formats working in a more sane way |
|
142 | Core | Feature Request | Medium | Visible Sleep Indicator | Closed | |
Task Description
Could we please get a visual indication that the Pandora is in sleep/low-power mode? I would suggest one of the case LEDs either turn on or blink to indicate the sleep mode. |
|
145 | Base OS | Feature Request | Low | missing tune2fs command | Closed | |
Task Description
bash: tune2fs: command not found
Please include tune2fs into basic OS image. Would be handy for managing filesystem on SD cards. |
|
151 | Base OS | Feature Request | Medium | [PATCH] Turn Off LCD when closing the lid | Closed | |
Task Description
Just added a few lines to op_lid.sh, will power off the LCD when you close the LID. Patch attached. |
|
153 | Application | Feature Request | Low | [PATCH] HACK: change OPP level according to set Mhz | Closed | |
Task Description
It's a hack, use on your own risk as always. I feel like abusing the tracker dropping all my patches here, but whatever. Patch attached. |
|
161 | Base OS | Feature Request | Low | Add ftp to base OS | Closed | |
Task Description
Include the netkit-ftp package so the Pandora has at least basic ftp functionality out of the box. |
|
174 | Base OS | Feature Request | Low | Include modem-manager in base image | Closed | |
Task Description
Please consider including the modemmanager package in the base distibution.
This allows 3G wireless dongles to work out of the box (configured via network-manager). |
|
184 | Core | Feature Request | Medium | libpnd: Add a function to get all mounted PNDs | Closed | |
Task Description
Add a function to get all mounted PNDs. Because it's very annoying to check all the menu/desktop folders on all of the SD-Cards. |
|
195 | Core | Feature Request | High | Start re-recharge of battery sooner | Closed | |
Task Description
Increase battery LVL_4 and LVL_3 threshold.
After reaching 100%, in some cases the charge circuit enters "battery full" state, stops charging, and begins to discharge. This is not entirely unexpected behavior according to the spec sheet, although I don't fully understand exactly the situations in which it completes charging. Once the battery is full, the battery will begin discharging. The charge circuit automatically restarts the recharge once the voltage has gone below a certain level (crosses below the LVL_3 voltage threshold)
The default LVL_3 voltage threshold is 3.902 volts which is at about 80-85% battery level as recorded by bq27500 chip. In my opinion, this is way too low.
Setting the BCIMFTH2 register to 0xCB increases the voltage threshold to about 4.003 volts which is about 93%.
Setting it to 0xDC may also be worthwhile, which is just over 95%.
By default, if a user leaves their Pandora plugged in overnight, they may wake up to find their Pandora has stopped charging and the capacity has dropped to almost 80%, which can be quite startling to some users who will then report it as a bug.
This change will ensure that it never drops below 93-95%, a much more acceptable level.
Specific code changes suggested, in the /drivers/power/twl4030_bci_battery.c file, somewhere in the twl4030_bci_battery_probe function (or a function called by it), add the lines:
/********************************/
#define KEY_FTH2 0x7F
#define REG_BCIMFTH2 0x017
ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, KEY_FTH2, REG_BCIMFKEY);
if (ret)
return ret;
ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, 0xDC, REG_BCIMFTH2);
if (ret)
return ret;
/********************************/
(Move defines to the top, as appropriate) |
|
196 | Core | Feature Request | Medium | [PATCH] Add tablet support into kernel | Closed | |
Task Description
Hi,
This should be a quite simple thing, but my first time touching
the OE repo and i cant test it, so be careful. |
|
212 | Core | Feature Request | Low | Add curl to core installed programs | Closed | |
Task Description
I wish for curl to be installed by default on the upcoming pandora FWs,
As reported by the angstrom repo, where I install using the command:
$sudo su
...
#opkg update
#opkg install curl
curl 7.21.2-r4.0.9 is 78.57 Kilobytes with the dependencies
Depends:libcurl4, libgnutls26, libgcrypt11, libgpg-error0, libc6, libz1
I do not know which is installed by default, but I'm sure libc6 is, so I'm going to state the info on the rest of the packages for its memory space usage on the NAND
libcurl4(142.99 Kilobytes):
Command line tool and library for client-side URL transfers.
Depends:libc6, libgnutls26, libz1, libgcrypt11, libgpg-error0, as you can see, it has the same dependencies as above, so it seems both curl and libcurl are probably exclusive from the others, but I will go forward and state the rest of the dependencies
libgnutls26 2.8.6-r10.0.5 (291.44 Kilobytes)
Depends:libz1, libgcrypt11, libgpg-error0, libc6, (again, it looks like the above depends on this)
libgcrypt11 1.4.1-r0.9 (220.35 Kilobytes)
Depends: libgpg-error0, libc6, (Oh look, we're not looking at libz1 anymore)
libgpg-error0 1.4-r7.1.9 (5.78 Kilobytes)
Depends:libc6
now to the lone libz1
libz1 1.2.3-r7.0.9 (41.95 Kilobytes)
Depends:libc6
So, in the case we already have the gpg stuff, then the installation is only 221.56KB, however, with the zlib and the gpg included, the total comes to 781.08KB
So, now that the cost is out of the way, What are the goods and bads?
Good:
Its a very versatile CLI program to get and send information over http through the network, and is tolerant of network issues
It doesn't take too much space relative to things that have been pulled out, like abiword.
The libcurl is a very good library, and could be of great benefit to some future projects.
Bad:
Well, we already have wget, which is not as configurable, and wget hates Craig's appstore
Here's the link to curl on the repo
http://www.angstrom-distribution.org/repo/?pkgname=curl |
|
220 | Core | Feature Request | Low | Please include /usr/bin/xkbset | Closed | |
Task Description
One of the first things after installing HF5 was downloading xkbset, because it is necessary for proper L-R buttons mapping as mouse buttons. Could you please include that in the system?
I am using urjaman's executable from here:
http://www.gp32x.com/board/index.php?/topic/55124-remapping-the-mouse-buttons-etc/page__st__15__p__896576entry896576
Even better would be a GUI that allows mapping of L-R buttons for mouse, just like GUI for nubs :) But including xkbset will be already good. |
|
226 | Core | Feature Request | High | Boot from /dev/sda devices requested | Closed | |
Task Description
Boot from usb hard disk not supported. This should be a rather simple fix of adding the sdx devices and adjust the boot scripts??
I was able to put this autoboot.txt on mmc 0:1
setenv bootargs debug root=/dev/sda1 rw rootdelay=2 console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
ext2load sda 0:1 0x80300000 /boot/uImage
bootm 0x80300000
This failed with amongst other things "Block device sda 0 not supported" and something about failing to load kernel
So I then changed the autoboot file to this
setenv bootargs debug root=/dev/sda1 rw rootdelay=2 console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
ext2load mmc 0:3 0x80300000 /boot/uImage
bootm 0x80300000
All this did was die after the kernel loaded.
I believe I could much better make use of this device if I could boot from some faster storage, please advise :) |
|
241 | Application | Feature Request | Low | MiniMenu shall remember state for next start | Closed | |
Task Description
With the setting "Live (not exit) on app run?" set to "NO" the currently selected tab and item shall be remembered, so that you return to the same state, in which you left MiniMenu. |
|
245 | Core | Feature Request | Low | BugTracker: Submitter shall be able to edit bug after p ... | Closed | |
Task Description
I accidentally posted a "feature request" as a "bug report" within the FlySpray BugTracker.
I wanted to correct my mistake.
It was not possible to edit it.
I assigned the bug to myself.
Then I could edit it.
But now I cannot un-assign it from me.
I merely wanted to suggest a feature but not take development responsibility (yet).
For original submitters, who later realize a mistake in their post, there should be a possibility to correct their mistake.
Please un-assign me from #237 #241 #243 and this one #245. Thanks. |
|
248 | Core | Feature Request | Medium | Support for hibernation by caching to SD card | Closed | |
Task Description
It would be very desirable that the PandoraOS could hibernate, and that this action can easily be accessed/triggered with either a hotkey or as an action for the max-idle-time-event or lid-close-event.
That would be the battery friendly universal action to quickly pause/resume any arbitrary application/task.
The current standby mode is far to power consuming for breaks longer than ~ 1 hour. Improving standby mode to be more battery-friendly would of course be too highly appreciated and practical.
If hibernation is triggered, RAM content gets written to a special file or partition on a SD card. The boot-manager of course needs to recognize such a RAM-file on SD-cards. In case it finds more than 1, i.e.: multiple cards/partitions, the one with the newest timestamp gets priority.
256MB RAM with about 10-20 MB/s read/write time to SD, would result in 25-12 seconds for going into or out of hibernation, which would be acceptable for me. In practice it would mean, that if I quickly have to pause me OpenPandora operation (i.e. train stop), I just close my lid, and put the Pandora into my pocket (2-4 seconds), and I am then trusting that the rest reliable happens in my pocket (10-20 seconds). |
|
275 | Core | Feature Request | Low | User should be a member of the cdrom group | Closed | |
Task Description
These permissions are needed for CD/DVD burning/player apps.
From bdc88595d8af726b3bf4745ece310f92299d8759 Mon Sep 17 00:00:00 2001
From: Paul Dersey
Date: Sun, 19 Feb 2012 17:22:41 -0500
Subject: [PATCH] pandora-first-run-wizard: add user to cdrom group
---
recipes/pandora-system/pandora-first-run-wizard.bb | 2 +-
.../pandora-first-run-wizard/first-run-wizard.sh | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/recipes/pandora-system/pandora-first-run-wizard.bb b/recipes/pandora-system/pandora-first-run-wizard.bb
index 904dc4a..a63dc0c 100755
--- a/recipes/pandora-system/pandora-first-run-wizard.bb
+++ b/recipes/pandora-system/pandora-first-run-wizard.bb
@@ -6,7 +6,7 @@ RDEPENDS = "hsetroot zenity dbus pandora-wallpaper-official tslib tslib-calibrat
COMPATIBLE_MACHINE = "omap3-pandora"
-PR = "r28"
+PR = "r29"
SRC_URI = " \
file://first-run-wizard.sh \
diff --git a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
index a801e3f..f30b80e 100755
--- a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
+++ b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
@@ -88,7 +88,7 @@ while ! username=$(zenity --title="Enter your username" --entry --text "Please c
zenity --title="Error" --error --text="Please try again." --timeout 6
done
-while ! useradd -c "$name,,," -G adm,audio,video,netdev,wheel,plugdev,users "$username" ; do
+while ! useradd -c "$name,,," -G adm,audio,cdrom,netdev,plugdev,users,video,wheel "$username" ; do
username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
done
--
1.7.8.3 |
|
276 | Core | Feature Request | Low | Kernel 3.2.x: add script to activate zram | Closed | |
Task Description
Please add a script to activate zram (RAM compression) when using the new kernel. More info about how to do this is available in this post:
http://boards.openpandora.org/index.php?/topic/7844-superzaxxon-beta-3-released/#entry138834
http://boards.openpandora.org/index.php?/topic/7226-superzaxxon-beta-11-released/page__st__20#entry128665
Please be aware though that Linux-SWAT had to explicitly set a value in "/sys/block/zram0/disksize" to get it work with Slackware. Over here the following is automatically set:
pandora:~$ cat /sys/block/zram0/disksize
61648896
Sadly I can *not* change this value, even using sudo:
pandora:~$ ls -l /sys/block/zram0/disksize
-rw-r--r-- 1 root root 4096 Apr 9 12:51 /sys/block/zram0/disksize
pandora:~$ cat /sys/block/zram0/disksize
61648896
pandora:~$ sudo echo 61648888 > /sys/block/zram0/disksize
-bash: /sys/block/zram0/disksize: Permission denied
Basically the following commands are required in a startup script to automatically create the "compressed swap inside RAM" aka zram (possibly a check if the modprobe was successful makes sense as well as checking for the size of the created ramdisk):
modprobe zram
mkswap /dev/zram0
swapon -p 5 /dev/zram0 |
|
12 | Core | To Do (Reminder) | Low | file association for .pnd | New | |
Task Description
Build the xml file and defaults.list so that pnd_run is file-assocated to .pnd |
|
216 | Application | To Do (Reminder) | Low | ToDo - SD manager tool (backup homedir/restore, prepare... | New | |
Task Description
Should make up a simple zenity script tool ..
- backup -> pick SD -> backs up current user's homedor to SD. (tar.gz format so permissions can be kept; not cpio/etc, too annoying for user.) -> keep rolling, or just one copy?
- restore -> pick SD -> pick user -> confirm -> wipe home and restore with version from tarball? (or just unpack in-place, so existing new files are kept)
-> prepare SD -> pick SD -> mkdir /pandora/menu and /pandora/desktop |
|
261 | Core | To Do (Reminder) | High | Overview of all current KEYBOARD INPUT related issues | Unconfirmed | |
Task Description
Built-in keyboard input is a central thing on the Pandora, as it concerns almost all user interfaced apps!
I realized that I myself and also others submitted quite many reports concerning this issue.
Hence this meta issue is intended as an overview/accumulation/aid for those devs who are willing to overwork the whole issue.
If you realize new related issues, feel free to add them here.
If this my effort is contradicting the OpenPandora workflow, then pardon me, and instruct me, how else to handle issues of that kind. Thanks!
Keyboard low level: Driver, keyboard layout, post processing (hotkeys, input support, etc)
FS#138 FS#227 FS#242 FS#259
Keyboard mid level: Application interfacing
FS#102 FS#123 FS#238
Keyboard application internal level
FS#157 (dupe: FS#249 ) FS#243 FS#256 |
|
14 | Core | To Do (Reminder) | Low | Add hup of pndnotifyd to .xinitrc | Closed | |
Task Description
Pretty minor risk, but if the guy creates multiple accounts on the machine, and logs out of one and into another .. we'll want to hup pndnotifyd
Alternative solution is to poll utmp (or inotify on utmp?) to watch for logins and handle it magicly. |
|
48 | Core | To Do (Reminder) | Low | Create the TV Out Enable / Disable scripts | Closed | |
Task Description
The commands do exist, I just need to wrap them round some zenity scripts. |
|
13 | Core | To Do (Reminder) | Low | verify pndevmapperd is invoking scripts | Closed | |
Task Description
menu button is verified
verify power button
verify lid open/close |
|
29 | Core | To Do (Reminder) | Low | ToDo: Map Fn-U and Fn-I with brightness controls | Closed | |
Task Description
Include brightness change hotkeys. |
|
34 | Core | To Do (Reminder) | Low | Add software mixer to ALSA | Closed | |
Task Description
Some headphones are very loud. The volume wheel cannot be used properly with them.
Therefore, we should be able to change the volume in software mode, too.
File attached below, simply needs to be included in the next image by DJWillis. |