|
32 | Core | Bug Report | Low | pndnotifyd: Crawling through directories it shouldn't i ... | Closed | |
Task Description
My current configuration is:
Rootfs on first SD Card, 2nd partition.
If I put my WIZ SD Card with tons of files into the second SD Slot while booting, pndnotifyd eats up about 95% of CPU time.
After about 8 - 9 minutes, it stopped eating the CPU and the system is working normally.
This doesn't happen when I put in the card when XFCE4 is already running.
Using LSOF, I can confirm it's crawling where it shouldn't:
pndnotify 1825 root 6r DIR 179,9 1441792 62488 /media/mmcblk1p1/roms/c64/Tapes
Could it be that on first initialization it hasn't loaded the config and crawls through the whole SD Card?
On a side note: I got 44700 files on that SD Card... so if it needs about 8 minutes, that does mean it can do over 5000 files a minute! |
|
31 | Core | Bug Report | High | X11 Crashing with omapfb | Closed | |
Task Description
Cleaned up a bit.
* Mouse is inverted if you run SDL Games from the console.
* Mouse is not properly calibrated when you run SDL Games under X fullscreen. Fixed with notaz patch that also fixes the X11-Crash with omapfb (see below)
Regarding the X11-Crash when using SDL-Fullscreen-Apps together with omapfb:
notaz nailed down the problem: It's actually xf86-input-tslib's fault-
omapfb only acted as catalizator here, causing SDL to use different code path and call different X functions.
His patch also almost increases the touchscreen problem (see above): It runs perfect for games in 800x480.
However, on small issue is left on apps with lower resolution which use their own mouse cursor:
As soon as you move the mouse outside of the game resolution (i.e. SuperTux runs 640x480), the mouse cursor stops at the end of the virtual screen and you have an offset.
This only seems to happen when the game uses it's own mouse cursor. If you go to the level editor of SuperTux and leave, the normal X cursor appears and the problem doesn't occur anymore.
So this is probably something that needs to be fixed in the game, not in the driver.
A compiled version (for testing):
http://notaz.gp2x.de/tmp/tslib_drv.so --- needs to be copied here: /usr/lib/xorg/modules/input/tslib_drv.so |
|
30 | Core | Bug Report | Medium | New issues in current image (pandora-20100102-new-kerne ... | Closed | |
Task Description
* It takes forever to startup.
It hangs while trying to initialize the new SDIO-WiFi:
[ 2363.922271] wl1251: WARNING WLAN not ready
[ 2363.927581] wl1251_sdio mmc2:0001:1: firmware: requesting wl1251-fw.bin
[ 2423.930328] wl1251: ERROR could not get firmware: -2
[ 2424.033447] wl1251: ERROR sdio write failed (-110)
[ 2425.786071] wl1251: ERROR sdio read failed (-110)
[ 2425.790893] wl1251: WARNING WLAN not ready
[ 2425.795776] wl1251_sdio mmc2:0001:1: firmware: requesting wl1251-fw.bin
* OpenPandora Start-Button is too small (has the same width as a normal icon) |
|
29 | Core | To Do (Reminder) | Low | ToDo: Map Fn-U and Fn-I with brightness controls | Closed | |
Task Description
Include brightness change hotkeys. |
|
28 | Core | Bug Report | High | pmenu only shows preview pictures when selecting the PN ... | Closed | |
Task Description
When selecting a PND for the first time, it only shows a red X.
When selecting the PND for the second time, it shows the preview picture. |
|
27 | Core | Bug Report | Low | xfce4-brightness-plugin: 0 isn't a good minimum value | Closed | |
Task Description
The xfce4-brightness-plugin can be set to a minimum of 0.
This is kinda confusing to the normal user, as it makes the screen totally black.
Maybe this could be changed to a minimum of 3? |
|
26 | Core | Bug Report | Medium | pndevmapperd only works when manually started | Closed | |
Task Description
Though pndevmapperd runs after booting (ps -A lists it), it doesn't react to anything.
EDIT: It DOES do something. It creates defunct op_menu.sh with each press.
When you run it manually from the terminal, the menu button works find and shows the appfinder. |
|
25 | Core | Bug Report | Medium | QWERTY Slowdowns | Closed | |
Task Description
Cleaned up a bit according to everything we know.
EDIT: notaz did it again. Fixed it. If you find any weird side effects, let us know :)
http://notaz.gp2x.de/tmp/Xorg
Replace the file /usr/bin/Xorg
Be sure to change permissions to 755
Switching between DPAD and keyboard does increase CPU usage on X A LOT. It even tends to crash ALSA if done too extensive.
According to notaz, this is due to some very old crap that's still included in X.
Internally it has one mouse and one keyboard, everything else is copied every time you press a key and bunch of callbacks are called, messages are sent to all screens and windows.
New tests from EvilDragon:
Disabling xfwm4 makes things better (ALSA won't crash anymore), but it still lags. Running it in minimal X (directly from .xinitrc) strangely fixes this - X won't eat up more than 17% CPU,
regardless how many buttons you press.
OLD Entry:
The qwerty controls when pressed are causing the system to slowdown making the application running to pause/delay. Ive seen in a least 2 application glquake and supertux. For example pressing space would cause the hiccups and shortly after the pressing stopped the application would regain normal running speed. The other joystick/nub controls work fine. glquake is getting controls direct from the event files. Supertux is using the SDL layer.
This was done on angstrom image from dec 19th.
EDIT: More tests done by EvilDragon with the latest image (pandora-xfce-image-omap3-pandora-20100102-new-kernel-fn-n-m-support.tar.bz2)
When you play with the DPAD and press a keyboard button, the app is making the small pause. You can press as many keyboard buttons as you want after that, there won't be another pause.
BUT as soon as you press the DPAD again, it pauses again. Then the next pause does happen when you press a keyboard button, etc.
So it feels like it pauses when you switch between DPAD and keyboard.
The most important thing: This only happens when you run SDL Games from X. It doesn't occur when running SDL games from the console. |
|
24 | Core | Bug Report | Low | op_menu.sh not working | Closed | |
Task Description
Reports:
xfce4-appfinder: Cannot open display: .
Fix might be (according to vimacs):
Change those two similar looking lines to:
sudo -u $xfceuser DISPLAY=:0.0 xfce4-appfinder
and:
pidlist=$(pstree -lpA | grep pnd_run.sh | sed -ne 's/.*-\(.*\)(\([0-9]\+\))/\2\n \1/p' | DISPLAY=:0.0 zenity --list --multiple --column "pid" --column "name" --title "kill" --text "which apps should be killed" | sed 's/|/\n/')
Needs to be checked. |
|
23 | Core | Bug Report | Very Low | slim-init doesn't pass session to .xinitrc | Closed | |
Task Description
It seems like slim doesn't send the session to .xinitrc
I included an "echo $1 >> ~/debug.txt" in the script and the file was completely empty.
That's why it always starts xfce4, not pmenu: The fallback is startxfce4. |
|
22 | Core | Bug Report | Low | pndevmapperd: Powerbutton / hold doesn't work. | Closed | |
Task Description
Moving the powerbutton doesn't get recognized by pndevmapperd.
When moving the powerbutton to hold, it reports:
keyboard.c: can't emulate rawmode for keycode 152 |
|
21 | Core | Bug Report | Low | op_bright.sh doesn't work correctly | Closed | |
Task Description
The file has to be changed to make it work.
The working script is:
#!/bin/bash
#get value range
minbright=3
maxbright=$(cat /sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/max_brightness)
curbright=$(cat /sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/brightness)
device=/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/brightness
if [ ! $1 ]; then
newbright=$(DISPLAY=0:0 zenity --scale --text "set brightness" --min-value=$minbright --max-value=$maxbright --value=$curbright --step 1)
else
newbright=$1
fi
if [ $newbright -le $minbright ]; then newbright=$newbright; fi
echo $newbright > $device |
|
20 | Core | Bug Report | Low | pndevmapperd: op_lid.sh / op_lidtoggle.sh | Closed | |
Task Description
pndevmapperd tries to run /usr/pandora/scripts/op_lidtoggle.sh, however, the filename is /usr/pandora/scripts/op_lid.sh
Either rename the file or change the call ;) |
|
19 | Core | Feature Request | Low | XFCE-Menu Editor | Closed | |
Task Description
Add an XFCE-Menu Editor (using python).
This way, people can edit the Startmenu :)
http://my.opera.com/Texel/blog/2008/02/20/xfce-applications-menu-editor-0-4 |
|
18 | Core | Bug Report | Medium | Some errors in first-run-wizard.sh | Closed | |
Task Description
Line 154 and 157 need to be changed:
153 if [ $launcher == "xfce" ]; then
154 sed -i 's/.*sessions.*/sessions xfce4,pmenu/g' /etc/slim.conf
155 echo Xfce selected as default interface
156 else
157 sed -i 's/.*sessions.*/sessions pmenu,xfce4/g' /etc/slim.conf
158 echo PMenu selected as default interface
159 fi
They should be:
154 sed -i 's/.*sessions .*/sessions xfce4/g' /etc/slim.conf
157 sed -i 's/.*sessions .*/sessions pmenu/g' /etc/slim.conf
Note the empty space behind sessions. :) |
|
17 | Core | Feature Request | Low | Backlight off when display shuts off | Closed | |
Task Description
Would it be easy to make the backlight shut off when the screen goes off after a period of inactivity? That would save a lot of energy both during the charge cycle and if left on with a battery running.
Thanks! |
|
15 | Core | Bug Report | Medium | Permissions / automounted SD Card | Closed | |
Task Description
Only root has write access to automounted SD Cards. The normal user can only read. |
|
13 | Core | To Do (Reminder) | Low | verify pndevmapperd is invoking scripts | Closed | |
Task Description
menu button is verified
verify power button
verify lid open/close |
|
11 | Core | Bug Report | High | Console keymap: Two keys not mapped yet | Closed | |
Task Description
INS (Fn + Del) is not working in console yet.
ALT and CTRL are not working in console yet.
The rest of the console keys are fine (tested in nano).
Keys in X are mapped completely. |
|
9 | Core | Bug Report | High | pmenu doesn't work | Closed | |
Task Description
Running pmenu leads to:
ERROR: config_read_file() failed: skins/Platinum/skin.cfg (line 21 of config skin.c)
(config_skin.c:22)
ERROR: cfg_gui_read failed, exiting... ( main.c:1517) |
|
8 | Core | Bug Report | High | WiFi doesn't work | Closed | |
Task Description
Error inserting /lib/modules/2.6.27-omap1/kernel/drivers/net/wireless/wl12xx/wl1251_sdio.ko: -1 Unknown symbol in module |
|
7 | Core | Bug Report | Low | No help or tips and tricks yet | Closed | |
Task Description
Help is missing as are the tips and tricks on startup. |
|
6 | Core | Bug Report | Medium | Calibrate Touchscreen within the Settings-Menu of XFCE ... | Closed | |
Task Description
It doesn't run. |
|
5 | Core | Bug Report | High | Touchscreen Calibration stops the First-Boot-Wizard | Closed | |
Task Description
When selecting the touchscreen calibration within the first-boot-wizard, the script stops after the calibration and the Pandora continues to boot. |
|
4 | Core | Bug Report | Low | Missing Icons | Closed | |
Task Description
Some icons are missing:
XFCE4 Settings Manager: Accessibility, Appearance, Desktop, Display, File Manager, Keyboard, Mouse
The icons on the panel (Mail, Web, etc.) are also missing (they're invisibile) |
|
3 | Core | Bug Report | High | Permissions for brightness and CPU Speed | Closed | |
Task Description
/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/brightness
/proc/pandora/cpu_mhz_max
Those values cannot be changed by the user, only by root.
Should be changed. |
|
1 | Core | Bug Report | Very Low | Sample Task | Closed | |
Task Description
This isn't a real task. You should close it and start opening some real tasks. |
|
337 | Core | Bug Report | Low | SPAM | Closed | |
Task Description
SPAM |
|
334 | Core | Bug Report | Low | op_bright_down.sh: error when decreasing brightness | Closed | |
Task Description
The script does not handle brightness "0".
If you try to decrease brightness if it's already at 0, it produces errors:
~ # /usr/pandora/scripts/op_bright_down.sh
/usr/pandora/scripts/op_bright_down.sh: line 18: [: : integer expression expected
/usr/pandora/scripts/op_bright_down.sh: line 22: echo: write error: Invalid argument
Not sure how to attach a patch here, but you can get the change with:
git pull git://git.assembla.com/openpandora-oe.git bug-333
I also changed the script to use /bin/sh since it's a valid posix script. |
|
332 | Core | Bug Report | Medium | op_lidsettings.sh and op_power.sh scripts fail for some ... | Closed | |
Task Description
/usr/pandora/scripts/op_lidsettings.sh and /usr/pandora/scripts/op_power.sh fail for some usernames due to poor shell scripting
these scripts find their config files by grepping /etc/passwd for the uer currently running xfce4-session, but the loose regexp matches too much. this shell fragment from op_lidsettings.sh:
grep /etc/passwd -e $(ps u -C xfce4-session | tail -n1 | awk '{print $1}')| cut -f 6 -d ":"
when a use called "me" is logged in, returns
/home/root
/usr/games
/var/run/dbus
/home/me
rather than just "/home/me"
all instances of that construct (reading and writing settings, in both op_lidsettings.sh and op_power.sh) should be changed to
grep /etc/passwd -e ^$(ps u -C xfce4-session | tail -n1 | awk '{print $1}'): | cut -f 6 -d ":"
to correctly match only the complete username field in /etc/passwd |
|
323 | Core | Bug Report | Medium | OS Selector bug | Closed | |
Task Description
When selecting no OS in the OS Selector you're returned to the login screen where you have to reauthenicate. (Pressing Enter without selecting an OS does this)
I happen to do this a lot and it drives me mad :P |
|
314 | Core | Bug Report | Low | Pandora-Button doesn't open XFCE menu | Closed | |
Task Description
If you enable the "disapear automaticaly" feature in the XFCE panel, the Pandora button doesn't open the main menu anymore and you need to open it manually with the cursor. |
|
313 | Core | Bug Report | Low | WiFi LED Not Triggered on First Activation | Closed | |
Task Description
The first time WiFi is enabled after boot, using either the the config button menu or the Toggle WiFi menu option the WiFi LED does not light up. (though the WiFi itself does work)
Once it has been enabled and disabled for the first time, it will work normally for subsequent uses of the WiFi toggle.
If the Toggle WiFi script is launched for the first time from the terminal the LED does light up.
This is the case in SuperZaxxon 1.53 with all current upgrades applied, and reportedly since the introduction of SuperZaxxon.
checking /sys/class/leds/pandora::wifi/trigger while the WiFi is enabled but the LED off shows that the trigger has been successfully set to phy0radio
Also noted while investigating this:
If Wifi is enabled for the first time from the terminal the following errors are generated by /etc/init.d/wl1251-init
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
Usage: insmod filename [args]
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
The commands that generate these errors are only executed if the mac80211 module is not already loaded - and that module is not unloaded when wifi is disabled. This seems to be unrelated to the issue being reported, however I can't see any cause for the issue at all, so I figured it was worth including it in the report anyway. |
|
312 | Core | Bug Report | Low | Special character in password | Closed | |
Task Description
problem:
setting a username and password using first setup wizzard it's possible to set special character like @#*%/ ect...
the login manager don't support this characters, so you need to reset the device.
possible solution:
1. disable the possibility of setting special characters.
2. implement special characters in login manager. |
|
311 | Core | Bug Report | Medium | [PATCH] Thunar configurable trash | Closed | |
Task Description
Not my work, but since I think my reply to ED on the forums will get buried I made this report.
The post with patch: http://boards.openpandora.org/index.php/topic/11189-its-arrived-questions/?p=210363 |
|
310 | Core | Bug Report | Medium | mkdosfs is broken - creates 1GiB filesystems | Closed | |
Task Description
When a partition is bigger than 2 or 4 GiB (can't recall now) it makes a "default" 1GiB filesystem. Propably missing large file support in the build. Also, the pandora sd card formatter is missing -F 32 so it makes (i think, it is some time from when I noticed this) FAT16 partitions... |
|
306 | Core | Bug Report | Low | Issue with Network Notification pop-ups | Closed | |
Task Description
Clicking on the button in a notification used when WiFi is enabled (such as the one stating that Wireless Networks were found), doesn't close the notification. In order to close it, I have to click the X button that's in the top-left. |
|
305 | Core | Bug Report | Low | [PATCH] bluetooth startup doesnt restore enabled state | Closed | |
Task Description
op_bluetooth.sh doesnt remember to call op_bluetooth_work.sh in the startup case. Patch inlined here (maybe broken, but for fast reading) and behind link: http://urjaman.dyndns.info/bluetooth-startup-fix.patch
--- op_bluetooth.sh.org 2012-11-24 01:54:53.000000000 +0000
+++ op_bluetooth.sh 2012-11-24 02:06:51.000000000 +0000
@@ -7,8 +7,13 @@
cd "$HOME"
if [ "$1" = "startup" ]; then
- [ -f "$LOCK" ] && sudo /usr/sbin/hciconfig "$INTERFACE" up pscan 1>/dev/null && sudo /usr/sbin/bluetoothd || echo "Bluetooth: User has not enabled Bluetooth."
-
+ if [ -f "$LOCK" ]; then
+ sudo /usr/pandora/scripts/op_bluetooth_work.sh 1
+ INTERFACE="`hciconfig | grep "^hci" | cut -d ':' -f 1`"
+ sudo /usr/sbin/hciconfig "$INTERFACE" up pscan 1>/dev/null && sudo /usr/sbin/bluetoothd
+ else
+ echo "Bluetooth: User has not enabled Bluetooth."
+ fi
else
# Figure out if Bluetooth is running or not |
|
304 | Core | Bug Report | Low | bluetooth serial port sleep causes lost / frozen connec ... | Closed | |
Task Description
I experienced (reliably) 3 times that if I had an idle ppp/rfcomm connection to my phone, it would eventually freeze so that the phone reported no active bluetooth connection and the pandora ppp would still think that the connection is active, but no data would flow. Killing pppd and re-trying would fail opening of the rfcomm link with "Host is down".
Disabling & enabling bluetooth "fixed" this so that pppd worked again (so it is not the phone that was "down").
Adding these lines to op_bluetooth_work.sh (apparently atleast) fixed it for me:
add between lines 14-15:
echo 0 > /sys/devices/platform/omap_uart.0/sleep_timeout
(or at any place during enable for that matter)
And to disable (before exit 0, line 30) to save power when bluetooth is off and restore normal settings:
echo 10 > /sys/devices/platform/omap_uart.0/sleep_timeout
I remember mentioning this way back when I last tested bluetooth, but got a reply that this should not be needed because we have flow control between the bt chip and pandora. But if a sleeping serial port loses a character when somebody sends a burst to it, what could flow control do? If it reported not ready to receive, the character would never be sent (and things would freeze...). If it reports ready to receive (what I think it does) the character will be lost. One would need to periodically disable the serial port sleep (and enable ready to receive) for a moment to check for pending data, but I think this would use more power than keeping the serial port active and/or possibly cause way too big delays.
I'm not really certain of this thing (whether this is a workaround, hack or a real fix... and whether my interpretation of what is happening is correct - i have no real proof), but I think that reporting what I've found is better than not. (And am I the only user of bluetooth with an old phone for internet (ppp+rfcomm, not pan)? ...) |
|
303 | Core | Bug Report | Low | pppd 2.4.3 has a bug, recommend upgrade to ppp 2.4.5 | Closed | |
Task Description
pppd 2.4.3 doesnt auto reconnect (in my setup) even if configured to do so (persist). Found a ppp bug report confirming this ( http://ppp.samba.org/cgi-bin/ppp-bugs/resolved?id=1110;user=guest - "ppp-2.4.3 / pppoe not reconnecting") and that it has been fixed. I compiled pppd 2.4.5 and that reconnects just fine. |
|
302 | Core | Bug Report | Low | Correct keymap not available during login process | Closed | |
Task Description
The correct keymap, as matching the characters printed on the keys, is available when running the First Boot Wizard, but not during login.
This means that special characters like ! ( ) and so on, which you enter via Fn-[2nd key] cannot currently be used in a username nor password.
My first experience with my Pandora was therefore that I had to reflash the OS due to this as I had locked myself out because I used a special character in my first chosen password.
Also reported here:
http://boards.openpandora.org/index.php?/topic/10112-question-mark/#entry188179 |
|
298 | Application | Bug Report | Low | Mousepad only searches once | Closed | |
Task Description
Whenever I search text in an open Mouspad document, it works fine the first time. As soon as I close the search dialogue and re-open it, the "find" (resp "find and replace" in replace dialogue) button is greyed out and unclickable. (This is the state the dialogue is in before typing anything, but this time, typing doesn't help.) "return" also doesn't work. Only help is closing and reopening Mousepad. |
|
294 | Core | Bug Report | Low | Left nub not working with kernel 3.2 | Closed | |
Task Description
Left nub doesnt work when powering on into SuperZaxxon Final with kernel 3.2.
Rebooting into kernel 2.6 fixes it until sleeping or powering off. After which rebooting into 2.6 is once again necessary to get the left nub working. |
|
289 | Application | Bug Report | Medium | "sudo find /" produces assertion | Closed | |
Task Description
$ sudo find /
find: ftsfind.c:477: consider_visiting: Assertion `ent->fts_info == 11 || state.type != 0' failed.
Aborted
This is fixed by updating findutils to latest version using
sudo opkg upgrade findutils
Release SuperZaxxon 1.5
(not Beta 3, as given in "Reported Version" field, but there the release cannot be chosen). |
|
278 | Core | Bug Report | Low | Kernel 3.2.x: broken middle click on right nub | Closed | |
Task Description
Using kernel 3.2.x middle click with the right nub is no longer working. With the "old" kernel you get a middle click when pushing the right nub down, this is no longer the case when eg using SuperZaxxon Beta3 (was already the case in SuperZaxxon Beta1 with kernel 3.2.1). As long as you are using kernel 2.6.27.x middle click is working as expected. |
|
277 | Core | Bug Report | Medium | SuperZaxxon B3: minimenu does not scan all folders | Closed | |
Task Description
Using SuperZaxxon beta3 (already observed it with beta2) it seems as if minimenu is not scanning all folders (and subfolders) correctly. Please have a look at this post for more information:
http://boards.openpandora.org/index.php?/topic/7558-superzaxxon-beta-2-released/page__st__140#entry138597 |
|
276 | Core | Feature Request | Low | Kernel 3.2.x: add script to activate zram | Closed | |
Task Description
Please add a script to activate zram (RAM compression) when using the new kernel. More info about how to do this is available in this post:
http://boards.openpandora.org/index.php?/topic/7844-superzaxxon-beta-3-released/#entry138834
http://boards.openpandora.org/index.php?/topic/7226-superzaxxon-beta-11-released/page__st__20#entry128665
Please be aware though that Linux-SWAT had to explicitly set a value in "/sys/block/zram0/disksize" to get it work with Slackware. Over here the following is automatically set:
pandora:~$ cat /sys/block/zram0/disksize
61648896
Sadly I can *not* change this value, even using sudo:
pandora:~$ ls -l /sys/block/zram0/disksize
-rw-r--r-- 1 root root 4096 Apr 9 12:51 /sys/block/zram0/disksize
pandora:~$ cat /sys/block/zram0/disksize
61648896
pandora:~$ sudo echo 61648888 > /sys/block/zram0/disksize
-bash: /sys/block/zram0/disksize: Permission denied
Basically the following commands are required in a startup script to automatically create the "compressed swap inside RAM" aka zram (possibly a check if the modprobe was successful makes sense as well as checking for the size of the created ramdisk):
modprobe zram
mkswap /dev/zram0
swapon -p 5 /dev/zram0 |
|
275 | Core | Feature Request | Low | User should be a member of the cdrom group | Closed | |
Task Description
These permissions are needed for CD/DVD burning/player apps.
From bdc88595d8af726b3bf4745ece310f92299d8759 Mon Sep 17 00:00:00 2001
From: Paul Dersey
Date: Sun, 19 Feb 2012 17:22:41 -0500
Subject: [PATCH] pandora-first-run-wizard: add user to cdrom group
---
recipes/pandora-system/pandora-first-run-wizard.bb | 2 +-
.../pandora-first-run-wizard/first-run-wizard.sh | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/recipes/pandora-system/pandora-first-run-wizard.bb b/recipes/pandora-system/pandora-first-run-wizard.bb
index 904dc4a..a63dc0c 100755
--- a/recipes/pandora-system/pandora-first-run-wizard.bb
+++ b/recipes/pandora-system/pandora-first-run-wizard.bb
@@ -6,7 +6,7 @@ RDEPENDS = "hsetroot zenity dbus pandora-wallpaper-official tslib tslib-calibrat
COMPATIBLE_MACHINE = "omap3-pandora"
-PR = "r28"
+PR = "r29"
SRC_URI = " \
file://first-run-wizard.sh \
diff --git a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
index a801e3f..f30b80e 100755
--- a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
+++ b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
@@ -88,7 +88,7 @@ while ! username=$(zenity --title="Enter your username" --entry --text "Please c
zenity --title="Error" --error --text="Please try again." --timeout 6
done
-while ! useradd -c "$name,,," -G adm,audio,video,netdev,wheel,plugdev,users "$username" ; do
+while ! useradd -c "$name,,," -G adm,audio,cdrom,netdev,plugdev,users,video,wheel "$username" ; do
username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
done
--
1.7.8.3 |
|
268 | Core | Bug Report | Low | HF6: error in op_power.sh | Closed | |
Task Description
When powering the system off after it has been in low power state once, an error is reported by op_power.sh, line 173.
Unfortunately I don't have the full message as it's visible on the console only for a short time before the screen turns off.
From looking at the script, the "fi" in the last line might be superfluous. |
|
267 | Core | Bug Report | High | HF6-Updater.pnd loses pnd_run.sh | Closed | |
Task Description
Several users have reported that running HF6-Updater.pnd leads to a missing /usr/pandora/scripts/pnd_run.sh
Possibly the file is locked by the Updater itself when installing pandora-libpnd_1.0-r56.5_armv7a.ipk
Forum thread:
http://boards.openpandora.org/index.php?/topic/5652-hotfix-6-final-released/page__view__findpost__p__99313 |
