|
98 | Application | Bug Report | Medium | Pidgin freezes (msn) | Closed | |
Task Description
Pidgin freezes when using the msn protocol. Sometimes it can last 25 minutes before doing so, sometimes it freezes instantly. Usually it's after only a few minutes. Once it freezes you are still able to close it using the built in crash manager (?!)
This happens both when running from XFCE and Minimenu. |
|
99 | Core | Bug Report | Medium | After waking up from standby the system is not responsi ... | Closed | |
Task Description
If I resume after standby (moved the slider to the right), the pandora shows the desktop and I can move the mouse cursor but if I click something, nothing happens.
IRC suggested that the CPU might still be clocked at the standby low power speed. |
|
109 | Core | Bug Report | Medium | Wifi looses connection after 20-30 minutes | Closed | |
Task Description
While logged into XFCE and browsing for an extended period the wireless will loose its connection. It will not reconnect until the Wifi is toggled off and back on again using the ToggleWifi application.
I have not tested this on an unsecured network. My wireless is WPA2 encrypted. |
|
111 | Core | Feature Request | Medium | Minimal Boot to X_Term / Pico | Closed | |
Task Description
Can we add an option to the boot menu for a minimal boot to X-term, and include Pico in the base OS?
This would allow us to fix problems we've caused by messing around with starup scripts etc.. |
|
129 | Base OS | Bug Report | Medium | [PATCH] bluetooth script fails to store/restore bluetoo ... | Closed | |
Task Description
Patch to op_bluetooth.sh attached. |
|
131 | Core | Bug Report | Medium | bluetooth drivers read timeout too trigger-happy/logic ... | Closed | |
Task Description
Shamelessly plugged from the forums, to get proper bug tracking and notifications on this. My post:
@notaz:
+ /* there hould be no rx in progress at this point */
+ if (info->rx_skb != NULL) {
+ dev_err(info->dev, "Receive timed out, %i done, %li left, "
+ "LSR=%02x, IER=%02x\n", info->rx_skb->len + 1,
+ info->rx_count, hci_h4p_inb(info, UART_LSR),
+ hci_h4p_inb(info, UART_IER));
+ info->rx_timed_out = 1;
+ }
Could you share your rationale for that comment in drivers/bluetooth/hci_h4p/core.c? (Oh and there's a typo, too :P )
EDIT: Asking this because commenting that block out changed status of bluetooth (for me) from unusable (can receive ~20-500kB of data before ppp connection halting) to fully working - used to have big problems playing 32kbps AAC stream (max 2 min), now already 4 mins of 96kbps, but i still think we need some receive timeout mechanism, but this one (as it currently stands) doesnt work.
Notaz's reply:
I don't really remember, it was more than 1.5 years ago. That driver is a hack, will need to review it, does it work stable with that code removed?
My reply:
For the non-IRC people:
urjaman on IRC said:
(22:47:45) urjaman: notaz: about stability: i'm on irc atm with that driver, its been playing internet radio for a few hours without problems now, but i don know for sure.
(22:48:00) urjaman: *dont know
(22:50:11) urjaman: my logic: if the serial port _never_ misses a byte it should be ok - IMO scary without some receive timeout, but works for me |
|
132 | Base OS | Bug Report | Medium | Deleting big files doesn't work | Closed | |
Task Description
When deleting a file on the SD card, the Pandora OS moves it into the thrash folder in the internal memory. That itself isn't very nice (shouldn't there be a trash folder on the SD card as well, to reduce unnecessary copying?), but if the file is too big for the internal memory, a error message appears, and the file cannot be deleted on the Pandora directly. |
|
142 | Core | Feature Request | Medium | Visible Sleep Indicator | Closed | |
Task Description
Could we please get a visual indication that the Pandora is in sleep/low-power mode? I would suggest one of the case LEDs either turn on or blink to indicate the sleep mode. |
|
151 | Base OS | Feature Request | Medium | [PATCH] Turn Off LCD when closing the lid | Closed | |
Task Description
Just added a few lines to op_lid.sh, will power off the LCD when you close the LID. Patch attached. |
|
162 | Core | Bug Report | Medium | XFCE Setting date | Closed | |
Task Description
The tool to setup the date/time in XFCE doesn't work properly :
- Menu -> Settings -> Date and Time
- The tool show up
- Select the time zone
Now an error window spam every seconds... |
|
177 | Core | Bug Report | Medium | no x or xfce after shutdown and reboot | Closed | |
Task Description
often but not always after shutting down the system (xfce logout, choose shutdown) thereĀ“s a problem when booting again.
i got the normal bootscreen but when x an xfce should start the screen remains black. i cannot say if the x or xfce didnĀ“ start or if it is a problem with the backlight intensity.
rebooting with pandora key and power key leads to the same situation. the only thing that seems to help is to remove the battery shortly.
so, what is the difference beetween reboot after powerdown and reboot after replacing the battery? there could be the point to fix this problem. |
|
180 | Core | Bug Report | Medium | LCD Brightness Lower = Flashing, Dies. | Closed | |
Task Description
Just try and lower with the Fn+Br- until it starts to flashing and just dies if you go lower. It does go back if you raise it again. Feels wrong. Also no real feel in the brightness getting lower. |
|
182 | Core | Bug Report | Medium | Ctrl + F5 (Fn Lock) Fail | Closed | |
Task Description
So I've tried this a while now with no success. I'm assuming its when Fn is triggered and then pressing Ctrl or Alt it goes away. |
|
184 | Core | Feature Request | Medium | libpnd: Add a function to get all mounted PNDs | Closed | |
Task Description
Add a function to get all mounted PNDs. Because it's very annoying to check all the menu/desktop folders on all of the SD-Cards. |
|
186 | Application | Bug Report | Medium | unusable "Manage LCD Gamma" tool | Closed | |
Task Description
Pandora Menu -> Settings -> LCD-Settings -> Manage LCD Gamma
Removing all the profiles listed there will make the user unable to even create a new one. The tool becomes unusable. I hope a re-flash would fix the problem.
The last profile in the list, or the Default one, shouldn't be deletable at all. |
|
189 | Core | Bug Report | Medium | pnd-run.sh does not work correctly for very long <pathn ... | Closed | |
Task Description
When unmounting, the pnd-run-script greps the output of "losetup -a" at some point. But if you have a very long pathname and filename for the pnd (like "/media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_EN.pnd" then the endpart is cut off in the output, grep can't find the right part and the script get's confused.
Example:
mounting works:
/usr/pandora/scripts/pnd_run.sh -p /media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_EN.pnd -b scummvm -m
unounting does not work:
/usr/pandora/scripts/pnd_run.sh -p /media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_EN.pnd -b scummvm -u
(see /tmp/pndrun*-logs for output)
The problem is that the outut of losetup looks like this in such a case:
"/dev/loop7: [b309]:157081 (/media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_*)"
And because the pnd-name is not fully shown, grepping the name does not work. After i renamed th pnd to a much shorter name (somi_amiga_en.pnd) it worked nicely. Still this should be fixed. |
|
192 | Core | Bug Report | Medium | [U-Boot] ext2fs_devread() read error - block (boot from ... | Closed | |
Task Description
[U-Boot] ext2fs_devread() read error - block
Description:
Formatted two different Transcend 8GB SD cards as EXT2 using both GParted and also with Mkfs.ext2, extracted pandora-rootfs.tar.bz2 to the root of the SD and added 'autoboot.txt' as described here: http://openpandora.org/firmware/README.txt
This issue appears to be same as mentioned here, looks like a patch maybe required in drivers/mmc/omap3_mmc.c):
http://lists.denx.de/pipermail/u-boot/2010-June/072198.html
Output on boot :
mmc1 is available
reading autoboot.txt
** Unable to read "autoboot.txt" from mc1 0:1 **
Loading file "autoboot.txt" from mmc1 device 0:! (xxa1)
184 bytes read
** Executing plain script at 82000000
Loading file "/boot/uImage-2.6.27.46-omap1" from mmc device 0:1 (xxa1)
** ext2fs_devread() read error - block
** Unable to read "/boot/uImage-2.6.27.46-omap1" from mmc 0:1 **
## Booting kernel from Legacy Image at 8030000 ...
Image Name: Angstrom/2.6.27-pandora+r21+git4
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2325740 Bytes = 2.2 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!
syntax error |
|
196 | Core | Feature Request | Medium | [PATCH] Add tablet support into kernel | Closed | |
Task Description
Hi,
This should be a quite simple thing, but my first time touching
the OE repo and i cant test it, so be careful. |
|
205 | Core | Bug Report | Medium | libpnd functions and dynamic libs missing | Closed | |
Task Description
tried to compile a simple test application that uses functions from libpnd, namely
pnd_evdev_open(pnd_evdev_e)
pnd_evdev_dpad_state(pnd_evdev_e)
pnd_evdev_closeall()
but all 3 seem to be missing.
yes, i'm linking to libpnd ... but no chance to get it running.
i'm using ivanovic's latest toolchain, which in turn installs "pandora-libpnd-dev_1.0-r40.5_armv7a.ipk" ...
also, there's only the static library available inside, no dynamic libraries. |
|
207 | Core | Bug Report | Medium | Touchscreen calibration / use of nubs conflict | Closed | |
Task Description
When using certain apps like Basilisk 2 / Dosbox / Enigma the analogue stick and touchscreen are both available to use as a mouse cursor.
All is well with the touch until you decide to touch the analogue stick when then affects touchscreen alignment by about 2 - 3 CM.
This has been going on since first release. |
|
215 | Core | Bug Report | Medium | Kingston 32GB Class6G2 SDHC card not working in pandora | Closed | |
Task Description
I have noticed errors like this, but not every time
[ 1455.612792] mmc2: card claims to support voltages below the defined range. These will be ignored.
[ 1455.621795] mmc2: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.
[ 1455.665985] mmc2: new SDIO card at address 0001
This is me plugging in my 32GB SD6G2 Kingston SDHC card.
at [ 1114.484252] is when the file copy started
Errors continue from there until it bombs and remounts the filesystem readonly.
I have tried this with ext3 vfat in various configurations and all fail the same I/O errors
Let me know if I can do anything to help
-------------------------------------
[ 989.496459] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 989.504638] mmc1: new high speed SDHC card at address 0003
[ 989.510620] mmcblk1: mmc1:0003 SD32G 31514112KiB
[ 989.515625] mmcblk1: p1 p2 p3 p4 < p5 p6 >
[ 989.940490] FAT: invalid media value (0x00)
[ 989.944702] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 990.083190] FAT: invalid media value (0x00)
[ 990.087402] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 991.907562] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 991.922943] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 992.002563] mmci-omap mmci-omap.0: MMC IRQ 0x208002 : TC ERRI DCRC
[ 992.003143] mmcblk0: retrying using single block read
[ 992.028411] kjournald starting. Commit interval 5 seconds
[ 992.048553] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 992.092346] kjournald starting. Commit interval 5 seconds
[ 992.237091] kjournald starting. Commit interval 5 seconds
[ 992.259185] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 992.361999] FAT: bogus number of reserved sectors
[ 992.366760] VFS: Can't find a valid FAT filesystem on dev mmcblk1p4.
[ 992.400909] kjournald starting. Commit interval 5 seconds
[ 992.612945] EXT3 FS on mmcblk1p2, internal journal
[ 992.617797] EXT3-fs: mounted filesystem with ordered data mode.
[ 992.787475] EXT3 FS on mmcblk1p3, internal journal
[ 992.792449] EXT3-fs: mounted filesystem with ordered data mode.
[ 993.038940] EXT3 FS on mmcblk1p1, internal journal
[ 993.043884] EXT3-fs: mounted filesystem with ordered data mode.
[ 993.205749] EXT3 FS on mmcblk1p5, internal journal
[ 993.210632] EXT3-fs: mounted filesystem with ordered data mode.
[ 993.510253] FAT: bogus number of reserved sectors
[ 993.515045] VFS: Can't find a valid FAT filesystem on dev mmcblk1p4.
[ 1114.484252] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1114.484802] mmcblk0: retrying using single block read
[ 1115.763946] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1115.765594] mmcblk0: retrying using single block read
[ 1115.984649] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1115.984985] mmcblk0: retrying using single block read
[ 1116.039489] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.039916] mmcblk0: retrying using single block read
[ 1116.094329] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.094757] mmcblk0: retrying using single block read
[ 1116.150146] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.152343] mmcblk0: retrying using single block read
[ 1116.212127] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.212615] mmcblk0: retrying using single block read
[ 1116.267791] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.268280] mmcblk0: retrying using single block read
[ 1116.335723] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.337738] mmcblk0: retrying using single block read
[ 1116.410766] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.413360] mmcblk0: retrying using single block read
[ 1116.488250] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.490234] mmcblk0: retrying using single block read
[ 1116.581390] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.581939] mmcblk0: retrying using single block read
[ 1116.645721] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.646331] mmcblk0: retrying using single block read
[ 1116.933288] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.933715] mmcblk0: retrying using single block read
[ 1117.000518] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.002899] mmcblk0: retrying using single block read
[ 1117.068328] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.070526] mmcblk0: retrying using single block read
[ 1117.128326] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.128753] mmcblk0: retrying using single block read
[ 1117.194183] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.194488] mmcblk0: retrying using single block read
[ 1117.261566] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.262084] mmcblk0: retrying using single block read
[ 1117.328674] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.329956] mmcblk0: retrying using single block read
[ 1117.388061] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.390380] mmcblk0: retrying using single block read
[ 1117.451629] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.452087] mmcblk0: retrying using single block read
[ 1117.510467] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.512725] mmcblk0: retrying using single block read
[ 1117.714874] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.715301] mmcblk0: retrying using single block read
[ 1117.776550] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.778930] mmcblk0: retrying using single block read
[ 1117.841247] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.841674] mmcblk0: retrying using single block read
[ 1122.718658] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1122.719055] mmcblk0: retrying using single block read
[ 1123.265136] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1123.265441] mmcblk0: retrying using single block read
[ 1123.442230] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1123.442413] mmcblk0: retrying using single block read
[ 1126.759338] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1126.759399] mmcblk1: error -110 transferring data, sector 32669824, nr 8, card status 0xc00
[ 1126.807830] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1126.807891] end_request: I/O error, dev mmcblk1, sector 32669824
[ 1126.813934] Buffer I/O error on device mmcblk1p1, logical block 4083726
[ 1126.820556] lost page write due to I/O error on mmcblk1p1
[ 1127.630950] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1127.631011] mmcblk1: error -110 transferring data, sector 32686232, nr 8, card status 0xc00
[ 1127.715179] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1127.715240] end_request: I/O error, dev mmcblk1, sector 32686232
[ 1127.721282] Buffer I/O error on device mmcblk1p1, logical block 4085777
[ 1127.727935] lost page write due to I/O error on mmcblk1p1
[ 1133.399963] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.400024] Spurious DMA IRQ
[ 1133.403411] mmcblk0: retrying using single block read
[ 1133.504821] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.504943] mmcblk0: retrying using single block read
[ 1133.599304] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.599548] mmcblk0: retrying using single block read
[ 1133.767486] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.767578] mmcblk0: retrying using single block read
[ 1134.222564] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1137.074981] mmcblk0: retrying using single block read
[ 1137.465576] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1137.465667] mmcblk1: error -110 transferring data, sector 17316672, nr 72, card status 0xc00
[ 1137.509582] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1137.509643] end_request: I/O error, dev mmcblk1, sector 17316672
[ 1137.515686] end_request: I/O error, dev mmcblk1, sector 17316680
[ 1137.521728] end_request: I/O error, dev mmcblk1, sector 17316688
[ 1137.527770] end_request: I/O error, dev mmcblk1, sector 17316696
[ 1137.533813] end_request: I/O error, dev mmcblk1, sector 17316704
[ 1137.539855] end_request: I/O error, dev mmcblk1, sector 17316712
[ 1137.545867] end_request: I/O error, dev mmcblk1, sector 17316720
[ 1137.551910] end_request: I/O error, dev mmcblk1, sector 17316728
[ 1137.557952] end_request: I/O error, dev mmcblk1, sector 17316736
[ 1137.766906] Aborting journal on device mmcblk1p1.
[ 1137.997436] journal commit I/O error
[ 1138.001037] EXT3-fs error (device mmcblk1p1) in ext3_create: IO failure
[ 1138.225067] ext3_abort called.
[ 1138.228149] EXT3-fs error (device mmcblk1p1): ext3_journal_start_sb: Detected aborted journal
[ 1138.236785] Remounting filesystem read-only |
|
221 | Core | Bug Report | Medium | 32MB worth of qt4 examples in /usr/bin/qt4 ? | Closed | |
Task Description
Hi, after upgrading to HF5, I accidentally discovered that there are 32MB of qt4 examples & demos in directory /usr/bin/qt4, those examples do work. For instance the /usr/bin/qt4/examples/webkit/fancybrowser/fancybrowser is a working WWW browser.
It is, without any dispute a very useful qt4 development help, but are you sure that you want to include all that in NAND ? |
|
248 | Core | Feature Request | Medium | Support for hibernation by caching to SD card | Closed | |
Task Description
It would be very desirable that the PandoraOS could hibernate, and that this action can easily be accessed/triggered with either a hotkey or as an action for the max-idle-time-event or lid-close-event.
That would be the battery friendly universal action to quickly pause/resume any arbitrary application/task.
The current standby mode is far to power consuming for breaks longer than ~ 1 hour. Improving standby mode to be more battery-friendly would of course be too highly appreciated and practical.
If hibernation is triggered, RAM content gets written to a special file or partition on a SD card. The boot-manager of course needs to recognize such a RAM-file on SD-cards. In case it finds more than 1, i.e.: multiple cards/partitions, the one with the newest timestamp gets priority.
256MB RAM with about 10-20 MB/s read/write time to SD, would result in 25-12 seconds for going into or out of hibernation, which would be acceptable for me. In practice it would mean, that if I quickly have to pause me OpenPandora operation (i.e. train stop), I just close my lid, and put the Pandora into my pocket (2-4 seconds), and I am then trusting that the rest reliable happens in my pocket (10-20 seconds). |
|
255 | Core | Bug Report | Medium | Waking Pandora with closed lid nevertheless turns scree ... | Closed | |
Task Description
Steps to reproduce the undesired behavior:
1) Close the lid. The screen goes off.
2) Slide the power switch to the right. The device goes into low power mode. The screen remains off.
3) Slide the power switch to the right. The device goes into normal power mode and turns on the screen although the lid is still closed!
Desired behavior:
Ad 3) If the system catches the event "wake from low power mode" it should first wake the system, then check the "lid open/close state", and set the screen on/off state accordingly. By this you could use the Pandora as a power-efficient sleep/wake-able closed-lid-device, practical for i.e. audio applications.
I am using: Pandora OS R1.HF6.A4 |
|
277 | Core | Bug Report | Medium | SuperZaxxon B3: minimenu does not scan all folders | Closed | |
Task Description
Using SuperZaxxon beta3 (already observed it with beta2) it seems as if minimenu is not scanning all folders (and subfolders) correctly. Please have a look at this post for more information:
http://boards.openpandora.org/index.php?/topic/7558-superzaxxon-beta-2-released/page__st__140#entry138597 |
|
289 | Application | Bug Report | Medium | "sudo find /" produces assertion | Closed | |
Task Description
$ sudo find /
find: ftsfind.c:477: consider_visiting: Assertion `ent->fts_info == 11 || state.type != 0' failed.
Aborted
This is fixed by updating findutils to latest version using
sudo opkg upgrade findutils
Release SuperZaxxon 1.5
(not Beta 3, as given in "Reported Version" field, but there the release cannot be chosen). |
|
310 | Core | Bug Report | Medium | mkdosfs is broken - creates 1GiB filesystems | Closed | |
Task Description
When a partition is bigger than 2 or 4 GiB (can't recall now) it makes a "default" 1GiB filesystem. Propably missing large file support in the build. Also, the pandora sd card formatter is missing -F 32 so it makes (i think, it is some time from when I noticed this) FAT16 partitions... |
|
311 | Core | Bug Report | Medium | [PATCH] Thunar configurable trash | Closed | |
Task Description
Not my work, but since I think my reply to ED on the forums will get buried I made this report.
The post with patch: http://boards.openpandora.org/index.php/topic/11189-its-arrived-questions/?p=210363 |
|
323 | Core | Bug Report | Medium | OS Selector bug | Closed | |
Task Description
When selecting no OS in the OS Selector you're returned to the login screen where you have to reauthenicate. (Pressing Enter without selecting an OS does this)
I happen to do this a lot and it drives me mad :P |
|
332 | Core | Bug Report | Medium | op_lidsettings.sh and op_power.sh scripts fail for some ... | Closed | |
Task Description
/usr/pandora/scripts/op_lidsettings.sh and /usr/pandora/scripts/op_power.sh fail for some usernames due to poor shell scripting
these scripts find their config files by grepping /etc/passwd for the uer currently running xfce4-session, but the loose regexp matches too much. this shell fragment from op_lidsettings.sh:
grep /etc/passwd -e $(ps u -C xfce4-session | tail -n1 | awk '{print $1}')| cut -f 6 -d ":"
when a use called "me" is logged in, returns
/home/root
/usr/games
/var/run/dbus
/home/me
rather than just "/home/me"
all instances of that construct (reading and writing settings, in both op_lidsettings.sh and op_power.sh) should be changed to
grep /etc/passwd -e ^$(ps u -C xfce4-session | tail -n1 | awk '{print $1}'): | cut -f 6 -d ":"
to correctly match only the complete username field in /etc/passwd |
|
79 | Core | Bug Report | Low | On clean install, picking minimenu as a GUI hangs the p ... | Closed | |
Task Description
I had to reboot the pandora (look in the manual :)) to get back to the installer. I had to specify ANOTHER user, as the one I made was still there. Picking the XFCE one did work. |
|
80 | Core | Bug Report | Low | After bug 79, the user manager doesn't list my users | Closed | |
Task Description
And when i try to remove anyway, it tries to remove user (null). I didn't have the guts to say 'Yes, remove user' |
|
83 | Base OS | Bug Report | Low | getting more /media/mmcblk?p1 | Closed | |
Task Description
From a conversation with skeezix:
I'm seeing /media/mmcblk0p1, mmcblk1p1, mmcblk2p1, mmcblk3p1 and mmcblk4p1 - is that something I should worry about? This started after I inserted & ejected my sd card a couple of times.
To which skeezix said:
The system starts at /media/mmcblk0 (with p1 ec being the partition number); if you eject the SD, then stick it back in, it will try to go to the earlier number again, but if some process was watching that SD when you ejected it, the system will nto be able to recycle that number, so you get the next blk number. So if you end up with /media/mmcblk5p1 (say), then it means you've been eject/inserting, and some program or another has been watching the SD instead of letting it go.
Isn't it nicer to cleanup the ones above 1 (so 0 and 1 are there) at startup to avoid confusion? |
|
84 | Application | Bug Report | Low | Bluetooth stays on | Closed | |
Task Description
You can enable Bluetooth, but can't disable it afterwards from the system -> toggle bluetooth menu shortcut. |
|
88 | Base OS | Feature Request | Low | pydoc is missing | Closed | |
Task Description
I love to use the pandora for some on-the-go python development, and I think I'm not the only one, but unfortunately the module pydoc is missing, which is needed for doing help(sys) on the interactive prompt. Could you please include that in the next firmware revision? Thanks! |
|
93 | Base OS | Bug Report | Low | zaxxon first boot: don't ask for user prompt if already ... | Closed | |
Task Description
How to reproduce:
First boot, Pandora's Box has been opened. Prompt for Full name, username, and password.
Then, simply press OK without selecting whether minimenu or xfce. None selected. Then you can't do any more. Wizard closes and you don't need any more options.
After manual reboot, the wizard starts again and asks for name again. But the username already exists. |
|
96 | Base OS | Feature Request | Low | Customizable SD mount options | Closed | |
Task Description
Right now writes are really slow because they write synchronously: there should be an option to change this so that the user is first taught how to unmount an sd card then remove it... |
|
97 | Base OS | Feature Request | Low | Missing kernel-module-snd-usb-audio | Closed | |
Task Description
Missing kernel-module-snd-usb-audio would be nice to hook the pandora up to my logitec speakers and have audio out and a hub for hooking up other devices at the same time... |
|
100 | Core | Bug Report | Low | Demos & Examples - remove from image | Closed | |
Task Description
/usr/bin/qt4/demos is 9Mb in size and /usr/bin/qt4/examples is 11Mb.
I'm guessing these are only useful for developers. Can they safely be removed?
edit: additionally, /usr/share/vim is 12M. Can those of us who are never going to use VIM remove it? |
|
103 | Base OS | Feature Request | Low | OpenAL library in firmware? | Closed | |
Task Description
Is there any chance we can have OpenAL installed as a default library? I'm considering porting some software that requires it (and truth be told I manually compiled and installed it for my own use atm...) |
|
107 | Base OS | Bug Report | Low | Secure Wifi will not connect until XFCE is loaded | Closed | |
Task Description
My Pandora is set to load MiniMenu on boot. I can't use any networked apps because wifi will not automatically connect on boot. XFCE needs to be loaded at least once so that i can enter my keychain password. Once i've entered my password Wifi connects and i can return to MiniMenu. |
|
113 | Core | Feature Request | Low | Add aliases for bash, eg ll for ls -l. Just uncommentin ... | Closed | |
Task Description
Aliases like ll for "ls -l" are common. They are super useful on the Pandora (less to type, no Fn key needed).
The .bashrc already includes them but they are commented. Please enabled the ls aliases and colored output. I do not think enabling the "-i" aliases too would be a good idea. |
|
114 | Application | Bug Report | Low | Chromium browser does not support HTTPS/SSL | Closed | |
Task Description
The Angstrom version of Chrome/Chromium web browser fails to open https links. This is a bug which has been fixed upstream, but not in the version packaged for Pandora. |
|
125 | Core | Bug Report | Low | wrong error handling in wl1251 platform initilization | Closed | |
Task Description
in
http://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blob;f=arch/arm/mach-omap2/board-omap3pandora.c;h=c6637426bf3a61f5bd0f85338304d0d8d114f67d;hb=HEAD
I see:
555 ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
556 if (ret < 0)
557 goto fail_nreset;
the goto should go to: fail_irq instead of fail_nreset
Denis |
|
130 | Core | Feature Request | Low | [PATCH] in vsense mbuttons mode down=middle click | Closed | |
Task Description
Patch attached. |
|
133 | Base OS | Feature Request | Low | Add TiMidity++ to OS? | Closed | |
Task Description
Hey, was just wondering if it would be possible to have TiMidity++ (http://timidity.sourceforge.net/) added with a hotfix, would allow games/ports that use it (the Zelda ports here: http://www.gp32x.com/board/index.php?/topic/54633-zelda-kind-of), zdoom and heretic (I think unless pickles has changed them) and other stuff that uses it to not have to include it in the .pnd and saving SD space... just an idea... |
|
134 | Core | Bug Report | Low | please add a working phonon backend | Closed | |
Task Description
Please see : http://www.gp32x.com/board/index.php?/topic/54831-minitube/page__view__findpost__p__883993
:) |
|
137 | Base OS | Feature Request | Low | Default vim config | Closed | |
Task Description
The current vim install does come without any config file. By default this means vim does work in "vi compatible mode" which makes it hardly usable. The attached config file is meant to be used as ~/.vimrc, so it should be added to "/etc/skel/.vimrc". The file is partly based on the default config used by gentoo.
Things this config file sets:
* Start in "vim mode" by default
* activate ruler
* set width of linenumber in ruler
* assume that the terminal uses a dark background
* configure what hitting backspace removed (newlines, ...)
* some magic to have different encoding formats working in a more sane way |
|
139 | Base OS | Bug Report | Low | Space should not be accepted in hostname | Closed | |
Task Description
http://www.gp32x.com/board/index.php?/topic/54878-embarassingly-nooby-questions-from-a-new-pandora-owner/page__view__findpost__p__885235
If the user names their Pandora using a space in the name, "This will prevent Xfce from operating correctly". Should trap this when asking for a host name. |
|
143 | Core | Bug Report | Low | LED triggers timer and heartbeat cause freezing when us ... | Closed | |
Task Description
Summary is about all i can dug out now. Somehow related to the PWM driving, because SD, bt and wifi leds work with trigger=timer.
NOTE: power and charger leds are driven by PWM (just so you all know what I'm talking about).
All i wanted to do was to add blinking power led to low power mode and all i get is a frozen pandora :/. |