|
14 | Core | To Do (Reminder) | Low | Add hup of pndnotifyd to .xinitrc | Closed | |
Task Description
Pretty minor risk, but if the guy creates multiple accounts on the machine, and logs out of one and into another .. we'll want to hup pndnotifyd
Alternative solution is to poll utmp (or inotify on utmp?) to watch for logins and handle it magicly. |
|
34 | Core | To Do (Reminder) | Low | Add software mixer to ALSA | Closed | |
Task Description
Some headphones are very loud. The volume wheel cannot be used properly with them.
Therefore, we should be able to change the volume in software mode, too.
File attached below, simply needs to be included in the next image by DJWillis. |
|
49 | Core | To Do (Reminder) | Low | Change some of our scripts into internal PNDs | Closed | |
Task Description
Some of our scripts (CPU Speed, Switch Default GUI, Enable TV Out) should be changed into PND format so that pmenu can also run them. |
|
48 | Core | To Do (Reminder) | Low | Create the TV Out Enable / Disable scripts | Closed | |
Task Description
The commands do exist, I just need to wrap them round some zenity scripts. |
|
47 | Core | To Do (Reminder) | Medium | evmapperd: Blinking LED and charging control | Closed | |
Task Description
evmapperd should start blinking when the power is getting low.
Ideally, the blinking speed should increase with decreasing battery power and should start maybe at 5% as default (would be nice to have the settings configurable by the user).
As soon as the AC adaptor is connected, blinking should stop.
When the battery power is at 0% it should immediately shutdown and poweroff (NOT to be overridden by the user!)
Aditionally, we should have some charging control (or would it be better using a different daemon for that?)
Here's part of my conversation with MichaelW:
when the charge current was below a threshold, it would reduce the charger input current allowed and take it down to about what the system needs
it would be an active thing constantly sampling the system and constantly updating the input current to match the system
the alternative is that when the battery is full, the charge path is cut off until the battery drops down a bit, maybe 90% |
|
12 | Core | To Do (Reminder) | Low | file association for .pnd | New | |
Task Description
Build the xml file and defaults.list so that pnd_run is file-assocated to .pnd |
|
60 | Core | To Do (Reminder) | Low | Include new menufile (Setting) for XFCE4 | Closed | |
Task Description
I just built a nice menu file which features subdirectories for games and emulators :)
I attached it, the old one should be replaced:
/etc/xdg/menus/xfce-applications.menu |
|
63 | Core | To Do (Reminder) | Low | Include new panel-setup for XFCE4 | Closed | |
Task Description
I enhanced the XFCE4-Panel setup a bit, since we now have working ALSA mixer and a battery monitor.
The files inside the attached archive should go to
/etc/xdg/op/xfce4/panel/*
in the image. |
|
70 | Core | To Do (Reminder) | Low | Make switching GUIs more customizable (hardcoded at the ... | Closed | |
Task Description
At the moment, /usr/pandora/scripts/op_switchgui,sh ,/usr/pandora/scripts/op_defaultgui.sh and /usr/pandora/scripts/first-run-wizard.sh are hardcoded with the GUIs we have.
I'd like to have that configurable for the future.
My current plan is having a config file with all the GUIs in (e.g. /etc/pandora/gui.conf)
In there, there should be ALL GUIs:
"XFCE4";"startxfce4";"xfce4-session-logout --logout"
"Netbook Launcher";"startnetbooklauncher";"killall netbook-launcher-efl"
"PMenu";"pmenu";""
So with an info:
a) What's the name of the GUI
b) How to start it
c) How to stop it (if it doesn't do that itself)
Therefore, various GUIs could be implemented and switched with the Switch GUI script by simply adding it to the config file.
Ideally, all GUIs should either have a shutdown script (so I don't have to kill it to quit it) or react properly on a simple terminate
command :)
Or they could do it themselves, read out the config file, show up the different GUIs we have, change the /tmp/gui.load file and quit.
Any more ideas?
Any help? Coding that script shouldn't be too hard, the only thing I don't know at the moment is how to parse various config lines (as above) into a shell script :)
vimacs, any idea there? |
|
64 | Core | To Do (Reminder) | Low | New power-manager.xml-file (removes opening the logout ... | Closed | |
Task Description
As the powerswitch is used to go into low power mode or shutdown, it doesn't make sense showing the logout dialogue (which would appear when you come back from low-power mode).
Therefore, I disabled it with this file.
It should be placed in:
/etc/xdg/op/xfconf/xfce-perchannel-xml/
in the image. |
|
62 | Core | To Do (Reminder) | Low | New xmodmap to include into latest image | Closed | |
Task Description
This is just the latest xmodmap, based on the latest map notaz released.
Both maps (xmodmap and notaz' console map) are attached.
Path in the image:
/etc/skel/.pndXmodmap
/etc/keymap-extension-2.6.map |
|
261 | Core | To Do (Reminder) | High | Overview of all current KEYBOARD INPUT related issues | Unconfirmed | |
Task Description
Built-in keyboard input is a central thing on the Pandora, as it concerns almost all user interfaced apps!
I realized that I myself and also others submitted quite many reports concerning this issue.
Hence this meta issue is intended as an overview/accumulation/aid for those devs who are willing to overwork the whole issue.
If you realize new related issues, feel free to add them here.
If this my effort is contradicting the OpenPandora workflow, then pardon me, and instruct me, how else to handle issues of that kind. Thanks!
Keyboard low level: Driver, keyboard layout, post processing (hotkeys, input support, etc)
FS#138 FS#227 FS#242 FS#259
Keyboard mid level: Application interfacing
FS#102 FS#123 FS#238
Keyboard application internal level
FS#157 (dupe: FS#249 ) FS#243 FS#256 |
|
50 | Core | To Do (Reminder) | Medium | pmenu: Add shutdown / logout | Closed | |
Task Description
There's no way yet to shutdown (poweroff) or logout from pmenu yet. |
|
75 | Base OS | To Do (Reminder) | Low | Remove application-launcher from Pandora-Button | Closed | |
Task Description
As the Application Launcher takes 12 seconds to load and slows all running games down terribly if you accidentally hit the Pandora-Button, it is useless.
Please change it so it does something different.
My suggestions:
* Open the XFCE Start-Menu
or
* Open a simple applauncher (as suggested by vimacs)
Make sure it doesn't disturb any game or emulator if you press it while playing! |
|
175 | Core | To Do (Reminder) | Very Low | Test | Closed | |
Task Description
Test if the edit button in the bug tracker works now. //Edit: Blah |
|
216 | Application | To Do (Reminder) | Low | ToDo - SD manager tool (backup homedir/restore, prepare... | New | |
Task Description
Should make up a simple zenity script tool ..
- backup -> pick SD -> backs up current user's homedor to SD. (tar.gz format so permissions can be kept; not cpio/etc, too annoying for user.) -> keep rolling, or just one copy?
- restore -> pick SD -> pick user -> confirm -> wipe home and restore with version from tarball? (or just unpack in-place, so existing new files are kept)
-> prepare SD -> pick SD -> mkdir /pandora/menu and /pandora/desktop |
|
59 | Core | To Do (Reminder) | Low | ToDo: Add joystick / keyboard switch to pnd_run and lib ... | Closed | |
Task Description
The next kernel offers switching between a joystick / keyboard mode.
In joystick mode, the DPAD and ABXYRL Buttons behave like a joystick buttons and have no keyboard mappings.
In keyboard mode, the DPAD and ABXYRL Buttons have keyboard mappings and are NOT registered as joystick.
The normal keyboard keys are not affected by this.
PXML needs to have a switch added for that and pnd_run should change the mode according to that switch.
When the PND app has quit, it should always go back to keyboard mode.
The commands are the following:
echo 1 > /proc/pandora/game_button_mode # keyboard mode
echo 2 > /proc/pandora/game_button_mode # gamepad mode |
|
29 | Core | To Do (Reminder) | Low | ToDo: Map Fn-U and Fn-I with brightness controls | Closed | |
Task Description
Include brightness change hotkeys. |
|
13 | Core | To Do (Reminder) | Low | verify pndevmapperd is invoking scripts | Closed | |
Task Description
menu button is verified
verify power button
verify lid open/close |
|
65 | Core | Feature Request | Very Low | .desktop files, be nice if they included the non-englis... | New | |
Task Description
.desktop files only include the English stuff right now (using the .desktop default tags.)
Be nice if in addition to 'title', we also include 'title[de]' type extras, whatever is in the PXML.xml
pnd_pxml_t includes all the goods, but pnd_disco_t has only the summarized english stuff. |
|
113 | Core | Feature Request | Low | Add aliases for bash, eg ll for ls -l. Just uncommentin ... | Closed | |
Task Description
Aliases like ll for "ls -l" are common. They are super useful on the Pandora (less to type, no Fn key needed).
The .bashrc already includes them but they are commented. Please enabled the ls aliases and colored output. I do not think enabling the "-i" aliases too would be a good idea. |
|
212 | Core | Feature Request | Low | Add curl to core installed programs | Closed | |
Task Description
I wish for curl to be installed by default on the upcoming pandora FWs,
As reported by the angstrom repo, where I install using the command:
$sudo su
...
#opkg update
#opkg install curl
curl 7.21.2-r4.0.9 is 78.57 Kilobytes with the dependencies
Depends:libcurl4, libgnutls26, libgcrypt11, libgpg-error0, libc6, libz1
I do not know which is installed by default, but I'm sure libc6 is, so I'm going to state the info on the rest of the packages for its memory space usage on the NAND
libcurl4(142.99 Kilobytes):
Command line tool and library for client-side URL transfers.
Depends:libc6, libgnutls26, libz1, libgcrypt11, libgpg-error0, as you can see, it has the same dependencies as above, so it seems both curl and libcurl are probably exclusive from the others, but I will go forward and state the rest of the dependencies
libgnutls26 2.8.6-r10.0.5 (291.44 Kilobytes)
Depends:libz1, libgcrypt11, libgpg-error0, libc6, (again, it looks like the above depends on this)
libgcrypt11 1.4.1-r0.9 (220.35 Kilobytes)
Depends: libgpg-error0, libc6, (Oh look, we're not looking at libz1 anymore)
libgpg-error0 1.4-r7.1.9 (5.78 Kilobytes)
Depends:libc6
now to the lone libz1
libz1 1.2.3-r7.0.9 (41.95 Kilobytes)
Depends:libc6
So, in the case we already have the gpg stuff, then the installation is only 221.56KB, however, with the zlib and the gpg included, the total comes to 781.08KB
So, now that the cost is out of the way, What are the goods and bads?
Good:
Its a very versatile CLI program to get and send information over http through the network, and is tolerant of network issues
It doesn't take too much space relative to things that have been pulled out, like abiword.
The libcurl is a very good library, and could be of great benefit to some future projects.
Bad:
Well, we already have wget, which is not as configurable, and wget hates Craig's appstore
Here's the link to curl on the repo
http://www.angstrom-distribution.org/repo/?pkgname=curl |
|
161 | Base OS | Feature Request | Low | Add ftp to base OS | Closed | |
Task Description
Include the netkit-ftp package so the Pandora has at least basic ftp functionality out of the box. |
|
288 | Core | Feature Request | Low | add functionality to inputrc | Unconfirmed | |
Task Description
Since the default inputrc doesn't contain any functionality (simple cli movements like ctrl-left or crtrl-right to skip words don't work) this diff may be useful to add to the cli-experience. I've also been trying to get the delete-key to work, but this is apparently already a known issue (see FS#227). I can remove this from the diff if you want. (I couldn't attach a file to the task somehow)
31,32c31,33
< # "\e[3~": delete-char
< # "\e[2~": quoted-insert
---
> #"\e[3~": delete-char
> "\e[^?": delete-char
> "\e[2~": quoted-insert
44,47c45,50
< # "\e[5C": forward-word
< # "\e[5D": backward-word
< # "\e\e[C": forward-word
< # "\e\e[D": backward-word
---
> "\e[1;5C": forward-word
> "\e[1;5D": backward-word
> "\e[5C": forward-word
> "\e[5D": backward-word
> "\e\e[C": forward-word
> "\e\e[D": backward-word |
|
217 | Application | Feature Request | Low | Add Mounting and unmounting context options for PND's | Unconfirmed | |
Task Description
It'll have to be in the SKEL.
/etc/skel/Applications/Settings/Thunar/uca.xml
People can replace the contents of their current uca.xml file with the following to gain this functionality now.
/home/[USERNAME]/Applications/Settings/Thunar/uca.xml
Terminal
Open Terminal Here
exo-open --working-directory %f --launch TerminalEmulator
Example for a custom action
*
emblem-symbolic-link
Mount PND
/usr/pandora/scripts/pnd_run.sh -p %f -m && thunar /mnt/utmp/
*.pnd;*.PND
gtk-jump-to-rtl
Unmount PND
/usr/pandora/scripts/pnd_run.sh -p %f -u
*.pnd;*.PND |
|
118 | Base OS | Feature Request | Low | add sdl-perl to the base OS | Unconfirmed | |
Task Description
Hi there,
Many games depend on sdl-perl. Perl and sdl are part of the base OS, but not not the connection between the two.
Cheers,
sebt3 |
|
133 | Base OS | Feature Request | Low | Add TiMidity++ to OS? | Closed | |
Task Description
Hey, was just wondering if it would be possible to have TiMidity++ (http://timidity.sourceforge.net/) added with a hotfix, would allow games/ports that use it (the Zelda ports here: http://www.gp32x.com/board/index.php?/topic/54633-zelda-kind-of), zdoom and heretic (I think unless pickles has changed them) and other stuff that uses it to not have to include it in the .pnd and saving SD space... just an idea... |
|
90 | Base OS | Feature Request | Low | Adding more "general libs" to the OS image | Closed | |
Task Description
It would be nice if some more generic libs that could be used by software ported to the Pandora would be available in the base image. For example for Wesnoth we do require these additional libs (names taken from http://www.angstrom-distribution.org/repo/?pkgname=boost ):
* boost-iostreams
* boost-regex
* boost-serialization
Beside this Wesnoth does also require this package (from http://www.angstrom-distribution.org/repo/?pkgname=lua5.1 ):
* lua5.1
In general I would recommend pulling in all of boost. This means the dependencies as well as the recommends. Here is a short paste of what this means:
Depends:
libc6, libstdc++6, libgcc1, boost-filesystem, boost-thread, boost-date-time, boost-system
Recommends:
boost-date-time, boost-filesystem, boost-graph, boost-iostreams, boost-program-options, boost-python, boost-regex, boost-serialization, boost-signals, boost-system, boost-test, boost-thread
There are probably some other packages/lib that might make sense to directly have in the OS image, but they currently don't come to my mind, so I can't list them here. ;) |
|
106 | Application | Feature Request | Very Low | AppData corruption | Unconfirmed | |
Task Description
The appdata folder was corrupted on my SD card from an unclean eject this made the folder read only until i ran a repaired it. MiniMenu still displayed all my PND files.
When clicking to launch the app would try to load crash and then return to MiniMenu without any visible error. This was pretty confusing and i thought it might be a good fix for a troubleshooting guide. |
|
156 | Base OS | Feature Request | Very Low | Ask to format SD Card | Unconfirmed | |
Task Description
When I have received my Pandora, I got an SD Card but it was not formated. I didn't have any card reader so I didn't now what was wrong (the Pandora or the SD Card).
When an unformated SD Card is inserted in the Pandora, it should be nice to ask if we want to format it. |
|
17 | Core | Feature Request | Low | Backlight off when display shuts off | Closed | |
Task Description
Would it be easy to make the backlight shut off when the screen goes off after a period of inactivity? That would save a lot of energy both during the charge cycle and if left on with a battery running.
Thanks! |
|
226 | Core | Feature Request | High | Boot from /dev/sda devices requested | Closed | |
Task Description
Boot from usb hard disk not supported. This should be a rather simple fix of adding the sdx devices and adjust the boot scripts??
I was able to put this autoboot.txt on mmc 0:1
setenv bootargs debug root=/dev/sda1 rw rootdelay=2 console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
ext2load sda 0:1 0x80300000 /boot/uImage
bootm 0x80300000
This failed with amongst other things "Block device sda 0 not supported" and something about failing to load kernel
So I then changed the autoboot file to this
setenv bootargs debug root=/dev/sda1 rw rootdelay=2 console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
ext2load mmc 0:3 0x80300000 /boot/uImage
bootm 0x80300000
All this did was die after the kernel loaded.
I believe I could much better make use of this device if I could boot from some faster storage, please advise :) |
|
245 | Core | Feature Request | Low | BugTracker: Submitter shall be able to edit bug after p ... | Closed | |
Task Description
I accidentally posted a "feature request" as a "bug report" within the FlySpray BugTracker.
I wanted to correct my mistake.
It was not possible to edit it.
I assigned the bug to myself.
Then I could edit it.
But now I cannot un-assign it from me.
I merely wanted to suggest a feature but not take development responsibility (yet).
For original submitters, who later realize a mistake in their post, there should be a possibility to correct their mistake.
Please un-assign me from #237 #241 #243 and this one #245. Thanks. |
|
307 | Core | Feature Request | Medium | Change how Automatic Shutdown works | Unconfirmed | |
Task Description
When thee Pandora is shutting down because its almost out of power, it should check to make sure that the nub inputs are set to the default mode (which is mouse movement for the left nub and mouse buttons for the right nub). If not, it should change them to be like that. |
|
234 | Core | Feature Request | Medium | Changeable behaviour when closing the lid | Closed | |
Task Description
As it was requested on forum.gp2x.de and I think it's a good idea I've written some scripts to allow the user to change what happens when the lid is opened/closed.
There are 3 Settings:
-The old behaviour (turning off the screen)
-Go into low power mode
-Shutdown
Default behaviour is still the same: Turn the screen off. Maybe we could change this to low power mode? I don't know.
I made a lot of changes to op_lid.sh: http://pastebin.com/GT3qxWSx (diff: http://pastebin.com/Z8GwpDj8 )
I changed line 11 in op_power.sh to: if [ $powerstate -ne 0 ]; then
And wrote a gui for changing the setting using zenity: http://pastebin.com/9JvSTqfQ
(I still can't upload any files, don't know if it's the fault of my browser, that's why I use this paste service) |
|
327 | Core | Feature Request | Low | Context menu for the XFCE menu | Unconfirmed | |
Task Description
Right now. the XFCE menu handles right clicks like left clicks. It would be more logical to either not do anything on a right click, or open a context menu that e.g. lets the user generate a link to an application on the desktop. |
|
96 | Base OS | Feature Request | Low | Customizable SD mount options | Closed | |
Task Description
Right now writes are really slow because they write synchronously: there should be an option to change this so that the user is first taught how to unmount an sd card then remove it... |
|
137 | Base OS | Feature Request | Low | Default vim config | Closed | |
Task Description
The current vim install does come without any config file. By default this means vim does work in "vi compatible mode" which makes it hardly usable. The attached config file is meant to be used as ~/.vimrc, so it should be added to "/etc/skel/.vimrc". The file is partly based on the default config used by gentoo.
Things this config file sets:
* Start in "vim mode" by default
* activate ruler
* set width of linenumber in ruler
* assume that the terminal uses a dark background
* configure what hitting backspace removed (newlines, ...)
* some magic to have different encoding formats working in a more sane way |
|
119 | Base OS | Feature Request | Low | ext4 support | Closed | |
Task Description
Don't know how much work this would be to get a later version of the linux firmware to add this, but it would be nice to have more filesystem support. |
|
250 | Application | Feature Request | Medium | File Browser Thunar - Trashing file crosses filesystem ... | Researching | |
Task Description
Trashing a file/folder seems to MOVE it to a certain trash directory on the MAIN VOLUME, rather then the ORIGINATING VOLUME, hence this can result in a COPY RATHER THAN A MOVE operation, if the trashed file originates from a filesystem other than the main filesystem!
This is very inefficient and faulty as it is:
a) Very time consuming
b) And in case of large files this operation can even fail due to not enough free space on the main volume. |
|
244 | Application | Feature Request | Low | Include man and the manpages | Unconfirmed | |
Task Description
The command line environment of the default OS does not include the command "man" and the respective manpages of the installed programs.
I personally often use manpages, as I hardly remember the syntax/arguments of all programs I use.
Having them would be very convenient!
EVALUATING NEEDED STORAGE AMOUNT
Some may argue that storage space is quite limited on the NAND.
Yes I agree. Hence the number of included programs is limited too. Hence it would not be all too many manpages.
When I press TAB into an empty Terminal prompt, I get 1406 possibilities, which is about the amount of available commands/programs if we ignore aliases, etc.
Multiply that with an average of 20 kb per manpage, and you get about 30 MB in total. With compression this could possibly be brought down to 15-20 MB.
POSSIBLE SOLUTIONS
A) Store into the NAND the manpages of core OS CLI programs only, and not all the library/system/etc documentation.
B) Include only the man command into the core OS, and compile/configure it in such a fashion, that it finds the manpages within non-NAND media (SD card, USB volume, etc).
b1) Specify that it simply looks into a certain path within the /media/*/pandora/ structure.
b2) Or offer PND packages like man-core.pnd, man-extended.pnd,... you get the idea or even man-custom.pnd (which would look into its appdata or a certain path for custom added manpages, to somehow get the b1 approach within the PND approach). |
|
174 | Base OS | Feature Request | Low | Include modem-manager in base image | Closed | |
Task Description
Please consider including the modemmanager package in the base distibution.
This allows 3G wireless dongles to work out of the box (configured via network-manager). |
|
86 | Base OS | Feature Request | Very Low | Including small development frameworks/projects in the ... | Closed | |
Task Description
It could be nice, if some very small development frameworks were included in the OS since the Pandora should make it as easy as possible for beginners to start programming.
That means: A "Start coding now"-wizard/script can be run from the desktop from which you select the type of project (c++, python, SDL...) you want to do. It copies the framework to SD-Card, opens it in an editor/IDE to see the sourcecode and leads you to the first compile and run. Can be combined with a PND-Packer-script.
Ideas for frameworks:
- a small python template (pygame?)
- a template project for an SDL-project (red square in fullscreen)
- a template project for OpenGL ES (a simple colored triangle)
- a template project for using NEON or DSP
- something with a GUI (QT?)
- general HelloWorlds
- all as simple as possible!
I know that this could help many beginners to actually start programming because the first compile is often hardest step (setting up toolchain, hassle with libs, includes, dependencies, compiler options, choice of editor, makefiles, all that stuff).
Feel free to delete this feature request if it doesn't fit into the bugtracker. |
|
276 | Core | Feature Request | Low | Kernel 3.2.x: add script to activate zram | Closed | |
Task Description
Please add a script to activate zram (RAM compression) when using the new kernel. More info about how to do this is available in this post:
http://boards.openpandora.org/index.php?/topic/7844-superzaxxon-beta-3-released/#entry138834
http://boards.openpandora.org/index.php?/topic/7226-superzaxxon-beta-11-released/page__st__20#entry128665
Please be aware though that Linux-SWAT had to explicitly set a value in "/sys/block/zram0/disksize" to get it work with Slackware. Over here the following is automatically set:
pandora:~$ cat /sys/block/zram0/disksize
61648896
Sadly I can *not* change this value, even using sudo:
pandora:~$ ls -l /sys/block/zram0/disksize
-rw-r--r-- 1 root root 4096 Apr 9 12:51 /sys/block/zram0/disksize
pandora:~$ cat /sys/block/zram0/disksize
61648896
pandora:~$ sudo echo 61648888 > /sys/block/zram0/disksize
-bash: /sys/block/zram0/disksize: Permission denied
Basically the following commands are required in a startup script to automatically create the "compressed swap inside RAM" aka zram (possibly a check if the modprobe was successful makes sense as well as checking for the size of the created ramdisk):
modprobe zram
mkswap /dev/zram0
swapon -p 5 /dev/zram0 |
|
184 | Core | Feature Request | Medium | libpnd: Add a function to get all mounted PNDs | Closed | |
Task Description
Add a function to get all mounted PNDs. Because it's very annoying to check all the menu/desktop folders on all of the SD-Cards. |
|
54 | Core | Feature Request | High | Make it possible to enable / disable keyboard mappings ... | Closed | |
Task Description
Some stuff (UAE4ALL, SuperTux, etc.) is having problems because ABXY and DPAD are mapped to keyboard buttons.
I guess this will lead to more problems in the near future with SDL apps, so it should be configurable to enable / disable the keyboard -> DPAD / ABXY mappings.
Maybe this could be included into libpnd? |
|
111 | Core | Feature Request | Medium | Minimal Boot to X_Term / Pico | Closed | |
Task Description
Can we add an option to the boot menu for a minimal boot to X-term, and include Pico in the base OS?
This would allow us to fix problems we've caused by messing around with starup scripts etc.. |
|
241 | Application | Feature Request | Low | MiniMenu shall remember state for next start | Closed | |
Task Description
With the setting "Live (not exit) on app run?" set to "NO" the currently selected tab and item shall be remembered, so that you return to the same state, in which you left MiniMenu. |
|
240 | Application | Feature Request | Low | MiniMenu shall return into full screen mode (more quick... | Unconfirmed | |
Task Description
If you set MiniMenu's option "Live (not exit) on app run?" to YES, and you quit an application and return to the still running MiniMenu, it runs in windowed mode, and takes about 2 seconds until it goes into full screen mode again.
This delay should at best be not noticeable at all, at most 0-1 seconds. |
|
239 | Application | Feature Request | Low | MiniMenu: New option: Grid stop horizontal | Unconfirmed | |
Task Description
I am suggesting the new option "Grid stop horizontal" for MiniMenu with the following possible settings and their effect.
Yes -> If the boundary is reached the focus remains there.
No -> If the boundary is reached the focus starts at the opposite side again.
Jump to next/prev line -> If the boundary is reached the focus jumps to the next/previous line and the opposite side. |
