|
263 | Application | Bug Report | Critical | MiniMenu with "Auto discover pnd apps?" set to NO hangs ... | Closed | |
Task Description
BUG DESCRIPTION:
On my SD card with Pandora OS 1.6.4 I changed MiniMenu's setting "Auto discover pnd apps?" to NO, and then the program remained in an endless loop showing "Setting up menu...", crashing, "Setting up menu...", crashing, and so on.
BUG REPRODUCTION:
The variable filesystem.do_pnd_disco set to the value 0 definetely causes the crash, but maybe only in conjunction with some of my other settings?!
Therefore see my attached config file mmpref.conf.
Maybe related to FS#79 , hard to tell, as this is a very minimal report.
Definitely not related to my previously reported MiniMenu bug FS#262
WORKAROUND:
1) If your default GUI is:
a) MiniMenu: Then after rebooting, MiniMenu will still be caught in an endless loop! Therefore boot up from an auxilary/temporary volume rather than your volume with the damaged MiniMenu! If your ruined system is on the NAND boot from an SD card, if the ruined system is on SD card, boot from NAND or another SD card. In doubt read: http://pandorawiki.org/Running_Linux_from_an_SD_card
b) Other than MiniMenu such as XFCE: Then you are lucky. Simply start into XFCE, and continue with the next step.
2) Open ~/.mmpref.conf with a text editor and set the variable filesystem.do_pnd_disco to the value 1.
3) Reboot into your healed volume. |
|
265 | Application | Bug Report | Medium | MiniMenu: Flawed tab display of sub-categories if they ... | Unconfirmed | |
Task Description
I assigned personal subcategories to some of my games.
Some of those subcategories share the same beginning string, i.e: Shooter, ShooterBallistic ShooterScoller.
MiniMenu displays those subcategories with flaws! See the ASCII screenshots below.
Note: The star symbols indicate the currently active selection.
The main category tab "Game" being active:
----------------------------------------------------------
| All | Audio | AudioVideo | Education |*Game*| Graphics |
----------------------------------------------------------
ActionGame AdventureGame ArcadeGame BlocksGame ...
Shooter ShooterBallistic ShooterScroller ...
GameA GameB GameC ...
----------------------------------------------------------
Now if I navigate into the sub-category "Shooter", everything normal:
----------------------------------------------------------
|*Shooter*|
----------------------------------------------------------
.. ShooterA ShooterB ShooterC ...
----------------------------------------------------------
But if I navigate to the sub-category "ShooterBallistic", strangely MiniMenu shows 2 tabs, "Shooter" and "ShooterBallistic", and jumps right into "Shooter".
----------------------------------------------------------
|*Shooter*| ShooterBallistic |
----------------------------------------------------------
.. ShooterA ShooterB ShooterC ...
----------------------------------------------------------
In order to reach my intended tab "ShooterBallistic" I need to navigate to it again. Annoying. There the contents are as expected:
----------------------------------------------------------
| Shooter |*ShooterBallistic*|
----------------------------------------------------------
.. ShooterBallisticA ShooterBallisticB ShooterBallisticC
----------------------------------------------------------
The flaw is the same for all other sub-categories beginning with "Shooter...". All have the flaw as shown in the example "ShooterBallistic", only that it is themselves instead of "ShooterBallistic". One more example to be perfectly clear:
----------------------------------------------------------
| Shooter |*ShooterScroller*|
----------------------------------------------------------
.. ShooterScrollerA ShooterScrollerB ShooterScrollerC
---------------------------------------------------------- |
|
266 | Application | Bug Report | Low | hf6rc: Unable to enter Low Power Mode with lid shut: | Closed | |
Task Description
Since hf6rc was installed I am unable to enter low power mode.
I did pull up the new lid config settings script and selected switch off screen.
Reproducable.
Nothing happens when the power switch is moved fully to the right for a short time.
I expect it to entry low power mode. quirky for it not too.
workaround: easy - enter LPM before closing lid.
btw: unable to select hf6 in reported version. |
|
289 | Application | Bug Report | Medium | "sudo find /" produces assertion | Closed | |
Task Description
$ sudo find /
find: ftsfind.c:477: consider_visiting: Assertion `ent->fts_info == 11 || state.type != 0' failed.
Aborted
This is fixed by updating findutils to latest version using
sudo opkg upgrade findutils
Release SuperZaxxon 1.5
(not Beta 3, as given in "Reported Version" field, but there the release cannot be chosen). |
|
298 | Application | Bug Report | Low | Mousepad only searches once | Closed | |
Task Description
Whenever I search text in an open Mouspad document, it works fine the first time. As soon as I close the search dialogue and re-open it, the "find" (resp "find and replace" in replace dialogue) button is greyed out and unclickable. (This is the state the dialogue is in before typing anything, but this time, typing doesn't help.) "return" also doesn't work. Only help is closing and reopening Mousepad. |
|
335 | Application | Bug Report | Low | Evince 2.30 crashes when fullscreen | Unconfirmed | |
Task Description
Hi,
Evince 2.30 often crashes with the following error message:
(evince:2834): EvinceDocument-CRITICAL **: ev_image_save_tmp: assertion `GDK_IS_PIXBUF (pixbuf)' failed
Segmentation fault
How to reproduce: open Evince, select a PDF file, go into fullscreen mode, then click into the body of the document.
Cheers, Magic Sam |
|
82 | Base OS | Bug Report | Critical | Network Manager - Wifi Can't Reconnect | Closed | |
Task Description
When wifi drops out, or you have disconnected from it and wish to reconnect, you cant reconnect using network-manager.
The connecting icon spins for a while, then it pops up the 'Password' Dialog. If you enter your password, the cycle begins again. |
|
83 | Base OS | Bug Report | Low | getting more /media/mmcblk?p1 | Closed | |
Task Description
From a conversation with skeezix:
I'm seeing /media/mmcblk0p1, mmcblk1p1, mmcblk2p1, mmcblk3p1 and mmcblk4p1 - is that something I should worry about? This started after I inserted & ejected my sd card a couple of times.
To which skeezix said:
The system starts at /media/mmcblk0 (with p1 ec being the partition number); if you eject the SD, then stick it back in, it will try to go to the earlier number again, but if some process was watching that SD when you ejected it, the system will nto be able to recycle that number, so you get the next blk number. So if you end up with /media/mmcblk5p1 (say), then it means you've been eject/inserting, and some program or another has been watching the SD instead of letting it go.
Isn't it nicer to cleanup the ones above 1 (so 0 and 1 are there) at startup to avoid confusion? |
|
89 | Base OS | Bug Report | Medium | XFCE not loading up defaults when MiniMenu is selected ... | Closed | |
Task Description
When mini menu is set to the default menuing system, XFCE settings (selected theme, pandora-specific key bindings) do not get loaded by default, they need to be forced by opening a terminal and typing xfwm4 --replace |
|
91 | Base OS | Bug Report | Medium | libaudiofile is installed by codec pack instead of in b ... | Closed | |
Task Description
Certain emulators such as Fuse are reliant on this file and I am assured it should be part of the default load-out (or rather in the HotFix) rather than in the codec pack as it's not a copyright issue. |
|
92 | Base OS | Bug Report | Medium | Startupmanager | Closed | |
Task Description
When trying to toggle
Enable/Disable Autologin
After initially enabling this feature, attempt was made to disable unsuccessfully.
System says that it saves this info, upon reboot, login screen shows up again.
Wifi toggle seems to work, as does Default GUI, & selecting default user |
|
93 | Base OS | Bug Report | Low | zaxxon first boot: don't ask for user prompt if already ... | Closed | |
Task Description
How to reproduce:
First boot, Pandora's Box has been opened. Prompt for Full name, username, and password.
Then, simply press OK without selecting whether minimenu or xfce. None selected. Then you can't do any more. Wizard closes and you don't need any more options.
After manual reboot, the wizard starts again and asks for name again. But the username already exists. |
|
95 | Base OS | Bug Report | Medium | Cannot Connect to Ad-Hoc WIFI | Closed | |
Task Description
I am Currently tethering my Mobile Network via my Android Phone
I cannot connect on this WIFI ... it's a Ad-Hoc connection
Everything else works, PC, Netbook's and iPod Touch
But Pandora seems to have some problems |
|
102 | Base OS | Bug Report | Very Low | Pandora key does not close XFCE menu | Closed | |
Task Description
If the XFCE menu has been opened by a touchscreen command, it can also be closed by hitting the logo again. However, opening the menu this way and then hitting the Pandora key only spawns more instances of the menu. Least intrusive way to close those seems to be to select "Logout" and hit Cancel. |
|
104 | Base OS | Bug Report | Low | AAC decoder libfaad doesn't appear to be compiled as fi... | Unconfirmed | |
Task Description
FAAD2 appears to not be compiled with fixed point decoding. My version of libfaad compiled with fixed point used 2-3x less cpu than the provided one. It's not enough to provide the switch to the configure script. the file libfaad/common.h has to be edited and a define uncommented. Line 68 in the v2.7 source.
/* COMPILE TIME DEFINITIONS */
/* use double precision */
/* #define USE_DOUBLE_PRECISION */
/* use fixed point reals */
//#define FIXED_POINT |
|
107 | Base OS | Bug Report | Low | Secure Wifi will not connect until XFCE is loaded | Closed | |
Task Description
My Pandora is set to load MiniMenu on boot. I can't use any networked apps because wifi will not automatically connect on boot. XFCE needs to be loaded at least once so that i can enter my keychain password. Once i've entered my password Wifi connects and i can return to MiniMenu. |
|
115 | Base OS | Bug Report | Medium | OS is missing libvorbisidec.so | Closed | |
Task Description
Please add to next hotfix, srb2 needed this file. My temporary hack was to modify the LD_LIBRARY_PATH (didnt like having to so this, but I think the way srb2 is loading the library it wouldnt work without it) and include the library in the pnd.
Once this lib is added ill do an update on srb2 and remove the LD hack. |
|
120 | Base OS | Bug Report | Medium | Python is missing some modules | Closed | |
Task Description
It seems like Python is missing some modules (like cgi) which should be included in the base installation. |
|
121 | Base OS | Bug Report | Medium | PyGame Hardware support | New | |
Task Description
PyGame is damn slow (games with scrolling are not at all playable).
Would be nice if Hardware surface could be used :) |
|
124 | Base OS | Bug Report | Low | ifup doesn't like dhclient | Unconfirmed | |
Task Description
I added:
iface usb0 inet dhcp
And ran:
ifup usb0
But dhclient simply prints usage. |
|
129 | Base OS | Bug Report | Medium | [PATCH] bluetooth script fails to store/restore bluetoo ... | Closed | |
Task Description
Patch to op_bluetooth.sh attached. |
|
132 | Base OS | Bug Report | Medium | Deleting big files doesn't work | Closed | |
Task Description
When deleting a file on the SD card, the Pandora OS moves it into the thrash folder in the internal memory. That itself isn't very nice (shouldn't there be a trash folder on the SD card as well, to reduce unnecessary copying?), but if the file is too big for the internal memory, a error message appears, and the file cannot be deleted on the Pandora directly. |
|
139 | Base OS | Bug Report | Low | Space should not be accepted in hostname | Closed | |
Task Description
http://www.gp32x.com/board/index.php?/topic/54878-embarassingly-nooby-questions-from-a-new-pandora-owner/page__view__findpost__p__885235
If the user names their Pandora using a space in the name, "This will prevent Xfce from operating correctly". Should trap this when asking for a host name. |
|
141 | Base OS | Bug Report | High | When using an unlabeled SD card, Hotfix3 final can't un ... | Closed | |
Task Description
I had beta 1 of hotfix 3, and there turning the pandora into a cardreader worked fine for that card. However, I just installed the latest hotfix 3 final, but that one fails to unmount. Attached is the pndrunop_storage.out. Apparently something's going wrong with the splitting of the partition name, as it tries to unmount /dev/mmcblk0 instead of /dev/mmcblk0p1
Manually unmounting it by using sudo umount /dev/mmcblk0p1 does work, but then I can't use the tool because that apparently only lists mounted memorycards. |
|
146 | Base OS | Bug Report | High | Minimenu regressions with Hotfix 3 | Closed | |
Task Description
Fresh firmware install with Hotfix 3 installed results in the following issues with Minimenu.
1. 25+% cpu usage versus ~5% in earlier versions.
2. Touchscreen no longer works correctly to select icons. Selecting tabs still works and occasionally it will work for selecting an application icon, but for the most part it simply does nothing. |
|
147 | Base OS | Bug Report | Low | Screen backlight is ON when starting with lid closed | Closed | |
Task Description
[HotFix3 installed]
If you power up the Pandora and have the screen closed, the backlight will still go on. That should not happen. Right now you have to open it, close it and than the backlight turns off to save energy... |
|
149 | Base OS | Bug Report | Very Low | Resets if Battery is removed - but power is still pluge ... | Closed | |
Task Description
The Pandora resets if the battery is removed - even though its plugged to the AC Adapter.
the power disapears for a second, and then the pandora notices that the power cable is actually plugged in, and immediately starts the pandora again |
|
158 | Base OS | Bug Report | Medium | Refresh rate and BPP | Unconfirmed | |
Task Description
On OS Zaxon (hotfix 3).
With "xfconf-query", the resolution is 800x480@60 Hz.
But with the tool in the menu "Settings" -> "Display", the resolution is 800x480@0 Hz.
With Java (opensdk-6-jre 6b18-1.8),
GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayModes()
return 1 display mode that is 800x480@0 Hz with a BPP of -1.
It seems to be the reason that GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayMode() return null
and when closing a java application that goes in fullscreen mode to throw an exception (invalid display mode). |
|
159 | Base OS | Bug Report | Medium | System > Run PND Application menu item does nothing | Unconfirmed | |
Task Description
With both Hotfix 3 and Hotfix 4 Beta the Run PND Application menu item fails to do anything.
Possibly related problem is that PND files newly copied to SD card are not recognized and entered on desktop as expected.
When you go to Thunar and right click - execute the PND file, nothing happens.
Possible fix by copying the PND to another folder on the SD card with Thunar.
This makes at least two PND files I had work.
Still no response with "Run PND Application" menu, though. |
|
160 | Base OS | Bug Report | Low | bug in date/time setting window | Closed | |
Task Description
first time i changed the date/time with no problems afterward every time when i try to change it it gives me "Please select month ..." this happens after selecting the time zone window. |
|
163 | Base OS | Bug Report | Low | DPMS related "display problems" | Closed | |
Task Description
Currently it looks like DPMS is active in xorg (eg when using XFCE). DPMS is normally used for stuff like turning the screen off to save energy. There seems to be no way to configure this while in XFCE. So the default xorg server values are used.
At the moment the screen is turned off after 10mins of inactivity. Problems with this are
a) that the time till it is turned off can not be configured
b) after wakeup from such a DPMS related display shutdown the brightness is set to maximum.
Solution to this:
Deactivate the sleep values via xorg.conf. I am attaching a diff to "[openembedded.git] / recipes / xorg-xserver / xserver-xorg-conf / omap3-pandora / xorg.conf" changing those to "default off". |
|
1 | Core | Bug Report | Very Low | Sample Task | Closed | |
Task Description
This isn't a real task. You should close it and start opening some real tasks. |
|
2 | Core | Bug Report | High | pndnotifyd | Closed | |
Task Description
pndnotifyd needs to be restarted before it works (tested in image 2009-12-21)
This can manually be fixed by installing two packages:
http://www.angstrom-distribution.org/unstable/feed/armv7a/base/sessreg_1.0.4-r0.2_armv7a.ipk
http://djwillis.openpandora.org/pandora/packages/pandora-libpnd_1.0-r12.5_armv7a.ipk
And adding to lines to slim.conf:
sessionstart_cmd /usr/bin/sessreg -a -l $DISPLAY %user
sessionstop_cmd /usr/bin/sessreg -d -l $DISPLAY %user |
|
3 | Core | Bug Report | High | Permissions for brightness and CPU Speed | Closed | |
Task Description
/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/brightness
/proc/pandora/cpu_mhz_max
Those values cannot be changed by the user, only by root.
Should be changed. |
|
4 | Core | Bug Report | Low | Missing Icons | Closed | |
Task Description
Some icons are missing:
XFCE4 Settings Manager: Accessibility, Appearance, Desktop, Display, File Manager, Keyboard, Mouse
The icons on the panel (Mail, Web, etc.) are also missing (they're invisibile) |
|
5 | Core | Bug Report | High | Touchscreen Calibration stops the First-Boot-Wizard | Closed | |
Task Description
When selecting the touchscreen calibration within the first-boot-wizard, the script stops after the calibration and the Pandora continues to boot. |
|
6 | Core | Bug Report | Medium | Calibrate Touchscreen within the Settings-Menu of XFCE ... | Closed | |
Task Description
It doesn't run. |
|
7 | Core | Bug Report | Low | No help or tips and tricks yet | Closed | |
Task Description
Help is missing as are the tips and tricks on startup. |
|
8 | Core | Bug Report | High | WiFi doesn't work | Closed | |
Task Description
Error inserting /lib/modules/2.6.27-omap1/kernel/drivers/net/wireless/wl12xx/wl1251_sdio.ko: -1 Unknown symbol in module |
|
9 | Core | Bug Report | High | pmenu doesn't work | Closed | |
Task Description
Running pmenu leads to:
ERROR: config_read_file() failed: skins/Platinum/skin.cfg (line 21 of config skin.c)
(config_skin.c:22)
ERROR: cfg_gui_read failed, exiting... ( main.c:1517) |
|
10 | Core | Bug Report | High | Permissions / sudoers isse in 12-21 image | Closed | |
Task Description
pndnotifyd will create .desktop files
Running those will fail; if you've just done a recent sudo, they'll run fine
Probably sudoers file needs fix |
|
11 | Core | Bug Report | High | Console keymap: Two keys not mapped yet | Closed | |
Task Description
INS (Fn + Del) is not working in console yet.
ALT and CTRL are not working in console yet.
The rest of the console keys are fine (tested in nano).
Keys in X are mapped completely. |
|
15 | Core | Bug Report | Medium | Permissions / automounted SD Card | Closed | |
Task Description
Only root has write access to automounted SD Cards. The normal user can only read. |
|
16 | Core | Bug Report | Medium | normal user login fails over serial/ttys | Closed | |
Task Description
Only root can login over serial or ttys, and only if it has no password. Ssh login works fine.
After some debugging it seems to be PAM issue, possibly recipes/shadow/ misconfiguration in OE. Maybe we sould use IMAGE_LOGIN_MANAGER = "busybox" instead of IMAGE_LOGIN_MANAGER = "shadow" as we don't need super security? |
|
18 | Core | Bug Report | Medium | Some errors in first-run-wizard.sh | Closed | |
Task Description
Line 154 and 157 need to be changed:
153 if [ $launcher == "xfce" ]; then
154 sed -i 's/.*sessions.*/sessions xfce4,pmenu/g' /etc/slim.conf
155 echo Xfce selected as default interface
156 else
157 sed -i 's/.*sessions.*/sessions pmenu,xfce4/g' /etc/slim.conf
158 echo PMenu selected as default interface
159 fi
They should be:
154 sed -i 's/.*sessions .*/sessions xfce4/g' /etc/slim.conf
157 sed -i 's/.*sessions .*/sessions pmenu/g' /etc/slim.conf
Note the empty space behind sessions. :) |
|
20 | Core | Bug Report | Low | pndevmapperd: op_lid.sh / op_lidtoggle.sh | Closed | |
Task Description
pndevmapperd tries to run /usr/pandora/scripts/op_lidtoggle.sh, however, the filename is /usr/pandora/scripts/op_lid.sh
Either rename the file or change the call ;) |
|
21 | Core | Bug Report | Low | op_bright.sh doesn't work correctly | Closed | |
Task Description
The file has to be changed to make it work.
The working script is:
#!/bin/bash
#get value range
minbright=3
maxbright=$(cat /sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/max_brightness)
curbright=$(cat /sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/brightness)
device=/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/brightness
if [ ! $1 ]; then
newbright=$(DISPLAY=0:0 zenity --scale --text "set brightness" --min-value=$minbright --max-value=$maxbright --value=$curbright --step 1)
else
newbright=$1
fi
if [ $newbright -le $minbright ]; then newbright=$newbright; fi
echo $newbright > $device |
|
22 | Core | Bug Report | Low | pndevmapperd: Powerbutton / hold doesn't work. | Closed | |
Task Description
Moving the powerbutton doesn't get recognized by pndevmapperd.
When moving the powerbutton to hold, it reports:
keyboard.c: can't emulate rawmode for keycode 152 |
|
23 | Core | Bug Report | Very Low | slim-init doesn't pass session to .xinitrc | Closed | |
Task Description
It seems like slim doesn't send the session to .xinitrc
I included an "echo $1 >> ~/debug.txt" in the script and the file was completely empty.
That's why it always starts xfce4, not pmenu: The fallback is startxfce4. |
|
24 | Core | Bug Report | Low | op_menu.sh not working | Closed | |
Task Description
Reports:
xfce4-appfinder: Cannot open display: .
Fix might be (according to vimacs):
Change those two similar looking lines to:
sudo -u $xfceuser DISPLAY=:0.0 xfce4-appfinder
and:
pidlist=$(pstree -lpA | grep pnd_run.sh | sed -ne 's/.*-\(.*\)(\([0-9]\+\))/\2\n \1/p' | DISPLAY=:0.0 zenity --list --multiple --column "pid" --column "name" --title "kill" --text "which apps should be killed" | sed 's/|/\n/')
Needs to be checked. |
