|
46 | Core | Bug Report | Medium | pmenu: MediaPlayer only shows ~/ | Closed | |
Task Description
The mediaplayer only does show the ~/-Directory.
Ideally, it should present SD1 / SD2 / Users Home. |
|
51 | Core | Bug Report | Medium | xfce4-battery-plugin: No time and no AC working | Closed | |
Task Description
xfce4-battery-plugin currently displays the % of the battery, but it doesn't show the time (or does it need a while to figure out how much time is left?)
Also, it doesn't realize when AC is connected.
I did do a sudo poweroff when power was below 5%. When it first powered down, I connected the AC and restarted. The plugin immediately powered down again, as it didn't know AC was connected. |
|
52 | Core | Bug Report | Medium | X11-Touchscreen: Fullscreen-Issue when the mouse cursor ... | Closed | |
Task Description
There are some issues with the touchscreen using X11 and fullscreen apps which use their own mouse cursor.
The mouse cursor tends to shift around when it comes outside of the normal screen area.
This can be seen with SuperTux: The mouse cursor is a penguin. Move that close to the edge of the screen and it jumps around and then is shifted to the real touchscreen.
Thanks to a bug in SuperTux, this can also be fixed: Go into the Level Editor and go back into the main menu:
On top of the penguin mouse cursor is the normal X mouse cursor, which will not Shift anymore.
Aditionally, I tried the Hatari Menu (running on 640x480) and AlephOne (running on 800x480).
Both use the standard X mouse cursor and both are working fine.
I guess that the mouse cursor gets confused if it has negative values. |
|
53 | Core | Bug Report | Low | Non-X Touchscreen: Inverted axis | Closed | |
Task Description
Running SDL-Apps in Non-X mode have inverted axis. |
|
55 | Core | Bug Report | Critical | .xinitrc problems (image from Feb 22nd) | Closed | |
Task Description
Loading a GUI from slim fails, as .xinitrc is broken.
Seems to have been edited using a windows editor? From line 50 on, there are newline characters that shouldn't be there.
Removing them makes XFCE4 loading fine. |
|
56 | Core | Bug Report | Medium | Movie Playing (Totem, VLC and MPlayer) | Closed | |
Task Description
Not really a bug report, just an information what issues what player has (tested using image from Feb 22nd).
MPlayer is missing a library in this image:
libxxf86dga1
Installing that one manually does make it work.
* VLC:
Plays things, but switching to fullscreen and back causes VLC to start having issues.
I wouldn't recomment VLC.
* Totem:
Works well (fullspeed video playing) when you disable the sidebar.
With the sidebar enabled, it doesn't play videos in fullscreen.
Menus are behind the video overlay as well as the controls in fullscreen mode (which is a bummer).
Needs about 10% more for the same movie than MPlayer (and therefore, stutters more often when mmcqd eats up CPU power)
* MPlayer:
Works well (fullspeed video playing) when video out is set to XV.
Audio out needs to be set to OSS. If set to Alsa, it segfaults when scrubbing around or doing a fast forward (see segfault below).
Runs very well in fullscreen, including controls on the bottom.
Does have issues displaying videos in windows (usually shows black, unless you resize the window).
Cache should be set to 40000. This will almost remove the stuttering when mmcqd accesses the SD card.
Menu is behind the video stream as well.
Only bad thing about Gnome MPlayer is, that you can't run it in fullscreen automatically when a video is loaded.
So basically, MPlayer is the best we have at the moment.
Fullscreen is really working flawlessly. Maybe we could change Gnome MPlayer to some fullscreen GUI (like the MPlayer for the Wii, etc.).
For a first release, it already works well enough.
Just need to make sure we include default settings as described above (most important: OSS sound!)
In case anyone wants to debug, here is the segfault that happens when using ALSA and fast forwarding:
[ 976.602203] Unable to handle kernel paging request at virtual address ffc84000
[ 976.609466] pgd = cf770000
[ 976.612182] [ffc84000] *pgd=8f842011, *pte=00000000, *ppte=00000000
[ 976.618530] Internal error: Oops: 807 [#1]
[ 976.622650] Modules linked in: g_cdc pvrsrvkm ipv6 ads7846 hwmon
[ 976.628723] CPU: 0 Not tainted (2.6.27-omap1 #1)
[ 976.633758] PC is at memset+0x30/0xc0
[ 976.637420] LR is at 0x0
[ 976.639984] pc : [] lr : [] psr: 20000093
[ 976.639984] sp : cf5abe04 ip : 00000000 fp : cf5abe24
[ 976.651519] r10: ffffe0a4 r9 : 00001d4c r8 : 00004c3b
[ 976.656799] r7 : ffffe0a4 r6 : cf8975c0 r5 : ffffc148 r4 : cfaed400
[ 976.663360] r3 : 00000000 r2 : 1ff8b350 r1 : 00000000 r0 : ffc83ffc
[ 976.669921] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
[ 976.677185] Control: 00c5387f Table: 8f770018 DAC: 00000015
[ 976.682952] Process mplayer (pid: 1781, stack limit = 0xcf5aa2e8)
[ 976.689086] Stack: (0xcf5abe04 to 0xcf5ac000)
[ 976.693481] be00: c02b4e00 cfae0a00 cfaed400 00005007 cf8975c0 cf5abe5c cf5abe28
[ 976.701873] be20: c02b2f74 c02b4da4 cf8975c0 cf5abe38 c0066db0 cfaed400 00005007 cf8975c0
[ 976.710235] be40: 00004c3b cf8975c0 00001d4c 00000000 cf5abe7c cf5abe60 c02b36f8 c02b2d94
[ 976.718627] be60: 00001d4c cfaed400 cf8975c0 00000000 cf5abecc cf5abe80 c02b3b50 c02b362c
[ 976.726989] be80: c00699fc c00382ac cf5abeb0 00000000 00ecdda0 00000000 cf5abee4 cf5abea8
[ 976.735382] bea0: c006a104 00001d4c 400c4150 cf8975c0 bef6050c c002ee44 cf5aa000 00000000
[ 976.743774] bec0: cf5abeec cf5abed0 c02b3dbc c02b3ac8 c02b31c4 bef6050c c002ee44 00000000
[ 976.752136] bee0: cf5abf1c cf5abef0 c02b1188 c02b3d64 c04ae8a0 00000000 00ecdda0 00001d4c
[ 976.760528] bf00: bef6050c 400c4150 bef6050c cf778760 cf5abf34 cf5abf20 c02b1504 c02b10d4
[ 976.768890] bf20: cf5abf5c cf778760 cf5abf54 cf5abf38 c00aa8ac c02b14d0 bef60548 cf778760
[ 976.777282] bf40: bef6050c 00000007 cf5abf7c cf5abf58 c00aab4c c00aa880 c0066e74 bef60548
[ 976.785675] bf60: cf5abf80 00000007 bef6050c 400c4150 cf5abfa4 cf5abf80 c00aaba4 c00aa8fc
[ 976.794036] bf80: 4b82cf18 00000000 00da2268 00da22b8 00000000 00000036 00000000 cf5abfa8
[ 976.802429] bfa0: c002ecc0 c00aab70 00da2268 00da22b8 00000007 400c4150 bef6050c bef6050c
[ 976.810821] bfc0: 00da2268 00da22b8 00000000 00000036 00d40628 00000000 00000000 00871348
[ 976.819183] bfe0: 00887178 bef60508 4012354c 4071963c 60000010 00000007 b601206b df08c3ff
[ 976.827575] Backtrace:
[ 976.830047] [] (snd_pcm_format_set_silence+0x0/0x13c) from [] (snd_pcm_playback_silence+0x1ec/0x2ac)
[ 976.841033] r6:cf8975c0 r5:00005007 r4:cfaed400
[ 976.845703] [] (snd_pcm_playback_silence+0x0/0x2ac) from [] (snd_pcm_update_hw_ptr+0xd8/0x1b4)
[ 976.856140] [] (snd_pcm_update_hw_ptr+0x0/0x1b4) from [] (snd_pcm_lib_write1+0x94/0x23c)
[ 976.866058] r7:00000000 r6:cf8975c0 r5:cfaed400 r4:00001d4c
[ 976.871765] [] (snd_pcm_lib_write1+0x0/0x23c) from [] (snd_pcm_lib_write+0x64/0x70)
[ 976.881256] [] (snd_pcm_lib_write+0x0/0x70) from [] (snd_pcm_playback_ioctl1+0xc0/0x3fc)
[ 976.891174] r4:00000000
[ 976.893737] [] (snd_pcm_playback_ioctl1+0x0/0x3fc) from [] (snd_pcm_playback_ioctl+0x40/0x44)
[ 976.904083] r7:cf778760 r6:bef6050c r5:400c4150 r4:bef6050c
[ 976.909820] [] (snd_pcm_playback_ioctl+0x0/0x44) from [] (vfs_ioctl+0x38/0x7c)
[ 976.918853] r4:cf778760
[ 976.921417] [] (vfs_ioctl+0x0/0x7c) from [] (do_vfs_ioctl+0x25c/0x274)
[ 976.929748] r6:00000007 r5:bef6050c r4:cf778760
[ 976.934417] [] (do_vfs_ioctl+0x0/0x274) from [] (sys_ioctl+0x40/0x64)
[ 976.942657] r6:400c4150 r5:bef6050c r4:00000007
[ 976.947326] [] (sys_ioctl+0x0/0x64) from [] (ret_fast_syscall+0x0/0x2c)
[ 976.955749] r7:00000036 r6:00000000 r5:00da22b8 r4:00da2268
[ 976.961486] Code: e1a0c001 e1a0e001 e2522040 a8a0500a (a8a0500a)
[ 976.967773] ---[ end trace 83bdb29850a1e142 ]--- |
|
57 | Core | Bug Report | High | New GLES driver not working yet (image from Feb 22nd) | Closed | |
Task Description
New GLES driver doesn't seem to load correctly right now.
Therefore, pmenu is also not working in this image. |
|
58 | Core | Bug Report | Critical | Pandora has not been shipped yet. | Closed | |
Task Description
Pandora has not been shipped yet. |
|
66 | Core | Bug Report | High | libpnd : pnd_pnd_mount() function bug | Closed | |
Task Description
libpnd : pnd_pnd_mount() function do not seems to wait the mount to success before returning, this can cause some application to try to access the pnd content before it really get mounted. |
|
67 | Core | Bug Report | Low | libpnd : pnd_apps_exec() function bug | Closed | |
Task Description
libpnd : pnd_apps_exec() do not seems to be up to date with pnd_run.sh script, when executing the function i get from the terminal :
getopt: invalid option -- 'c'
Terminating... |
|
68 | Core | Bug Report | Low | AlephOne PND not running | Closed | |
Task Description
I don't even know if this is a bug or if I just happen to have a fault in my PXML file.
All multi-apps-PNDs I have do run fine - except for AlephOne.
Whether I include the datafiles or keep them external, it won't work.
I can manually mount it (pnd_run.sh -p /bla.pnd -m ) and run it from the mounted directory, but it does not do so automatically from the desktop file.
If one of you two could check that out, that would rock.
You can download it from the usual PND-Repo I use ;) |
|
69 | Core | Bug Report | High | libpnd : pnd_apps_exec() function bug | Closed | |
Task Description
PND_EXEC_OPTION_BLOCK do not seems to work anymore ( the function does not wait the pnd_run.sh task to finish anymore ) |
|
71 | Core | Bug Report | Low | Permissions of omapdss need to be fixed | Closed | |
Task Description
Only root can currently setup and change TV Out parameters :)
Should be set to make it user-changeable. |
|
72 | Core | Bug Report | Medium | Automatic Screen Saver crashes SGX Apps | Closed | |
Task Description
The automatic screen saver crashes apps which use the new SGX driver.
Has been tested with pmenu and Quake.
This does NOT happen with the Lid close / open turn off-routine, just with that automatic screen saver that turns of the LCD when you don't press a button for a while. |
|
74 | Core | Bug Report | Medium | xfce4-mouse-settings: Fix the check for Xi so it does n ... | Closed | |
Task Description
The xfce4-mouse-settings don't work on the Pandora, because they report "XI is not present or too old"
This is a known bug and there already is a fix for it:
http://www.mail-archive.com/xfce4-commits@xfce.org/msg09395.html |
|
76 | Core | Bug Report | High | Wifi connection lost under high CPU load | Closed | |
Task Description
I noticed that when I tried Quake 3 a while back that I would lose my internet connection. Only the very first time I tried it did it ever find a couple thousand servers and let me join a map. Since then, it always dies and I never see any servers.
I wasn't too concerned yet because maybe it's just Q3 doing something but tonight mplayer was running full screen and then suddenly it started chugging and the network manager popped up that it was trying to connect (spinning logo at the bottom). Since you only get one shot at network manager per boot, it was a lost cause.
The correlation I make here was that I'm sure the CPU was under heavy load for both cases but I haven't tried other programs to see what happens. I didn't have any games on this card tonight. Can anyone repeat this problem or is it a known issue? |
|
77 | Core | Bug Report | Low | Shut down screen | Closed | |
Task Description
The shut down screen says "booting...". :) |
|
78 | Core | Bug Report | Very Low | minimenu - zaxxon initial release - doesn't use preview ... | Closed | |
Task Description
Stupid; in the /etc/pandora/conf/mmenu.conf the preview cache is looked for in mmcblk[12]* .. should be [01] or really just /media/*/pandora... etc.
So just switch [12] to [01] and works fine.
Fixed in the git tree already, so will roll out in a real image build. |
|
116 | Application | Bug Report | Low | Freetype issues (freeciv sdl client) | Closed | |
Task Description
With the SDL client for freeciv the font characters show up as square blocks and garbage characters. This may be related to freetype.
I had also heard that battle at wesnoth had similar issues. |
|
120 | Base OS | Bug Report | Medium | Python is missing some modules | Closed | |
Task Description
It seems like Python is missing some modules (like cgi) which should be included in the base installation. |
|
140 | Core | Bug Report | High | WiFi Starts off fast then slows down | Closed | |
Task Description
When downloading files using a browser or wget or when attempting to stream videos we see a fast initial burst which then slows down dramatically.
see following topics for more details and actual user stats.
http://www.gp32x.com/board/index.php?/topic/54340-post-your-speed-over-wifi/
http://www.gp32x.com/board/index.php?/topic/54921-you-tube-through-vlc/
http://www.gp32x.com/board/index.php?/topic/54831-minitube/
http://www.gp32x.com/board/index.php?/topic/54901-possible-wifi-issues/ |
|
167 | Application | Bug Report | Low | midori crashes all the time | Closed | |
Task Description
midori crashes all the time |
|
317 | Core | Bug Report | Medium | After disabling USB-host current still flows into USB d ... | Closed | |
Task Description
On my Pandora, due to bad internal WiFi, I use an Edimax EW-7811Un USB WiFi adapter, which has a status-LED, flickering according to the network activity.
After disabling USB-host through the settings menu, the WiFi functionality is gone, but the device's LED is still on. So some current must still flow into the USB device.
The LED now has a permanent light, no flickering! This lack of "device intelligence" indicates that the device was indeed turned off, just current flowing directly to the LED circuit unaltered).
I can repeat the aforementioned steps many times, the behavior is the same.
As soon as I then first physically unplug and reinsert the device, the LED remains off eventually.
From then on, every further issuing of "Disable USB-host" through the settings menu turns the device LED completely off.
Smells like a kernel bug to me! As it requires one real un/re-plugging, from then on works ok. |
|
79 | Core | Bug Report | Low | On clean install, picking minimenu as a GUI hangs the p ... | Closed | |
Task Description
I had to reboot the pandora (look in the manual :)) to get back to the installer. I had to specify ANOTHER user, as the one I made was still there. Picking the XFCE one did work. |
|
80 | Core | Bug Report | Low | After bug 79, the user manager doesn't list my users | Closed | |
Task Description
And when i try to remove anyway, it tries to remove user (null). I didn't have the guts to say 'Yes, remove user' |
|
81 | Core | Bug Report | High | pandora seems to hang during boot, turns out it didn't | Closed | |
Task Description
it seemed just now thay my pandora didnt complete its bootsequence. During booting, the screen turned black. I thought it had crashed, but I still saw lights flashing when I inserted an SDcard.
I then assumed that it WAS booting normally, but that the screen was turned down. So I pushed enter to confirm my username, as I suspected that I was at that prompt. Next I inputted my pwd, pushed enter, waited a bit, and then ised Fn+I to increase the brightness. It worked!
I think that during the bootprocess the screen should at most be set to the darkest setting, but never to off.
I think I know what happened. I told my pandora to shutdown and closed the lit before it was done. I guess that that swiittched off the screen, a setting which was then saved by the shutdown process, and restored during the bootsequence.
I would suggest fixing this in the startup process, rather than the shutdown process, because that way, no matter what ends up in the settings, a sensible valsue is set at startup. I'll see if I can reproduce this. |
|
83 | Base OS | Bug Report | Low | getting more /media/mmcblk?p1 | Closed | |
Task Description
From a conversation with skeezix:
I'm seeing /media/mmcblk0p1, mmcblk1p1, mmcblk2p1, mmcblk3p1 and mmcblk4p1 - is that something I should worry about? This started after I inserted & ejected my sd card a couple of times.
To which skeezix said:
The system starts at /media/mmcblk0 (with p1 ec being the partition number); if you eject the SD, then stick it back in, it will try to go to the earlier number again, but if some process was watching that SD when you ejected it, the system will nto be able to recycle that number, so you get the next blk number. So if you end up with /media/mmcblk5p1 (say), then it means you've been eject/inserting, and some program or another has been watching the SD instead of letting it go.
Isn't it nicer to cleanup the ones above 1 (so 0 and 1 are there) at startup to avoid confusion? |
|
84 | Application | Bug Report | Low | Bluetooth stays on | Closed | |
Task Description
You can enable Bluetooth, but can't disable it afterwards from the system -> toggle bluetooth menu shortcut. |
|
89 | Base OS | Bug Report | Medium | XFCE not loading up defaults when MiniMenu is selected ... | Closed | |
Task Description
When mini menu is set to the default menuing system, XFCE settings (selected theme, pandora-specific key bindings) do not get loaded by default, they need to be forced by opening a terminal and typing xfwm4 --replace |
|
91 | Base OS | Bug Report | Medium | libaudiofile is installed by codec pack instead of in b ... | Closed | |
Task Description
Certain emulators such as Fuse are reliant on this file and I am assured it should be part of the default load-out (or rather in the HotFix) rather than in the codec pack as it's not a copyright issue. |
|
92 | Base OS | Bug Report | Medium | Startupmanager | Closed | |
Task Description
When trying to toggle
Enable/Disable Autologin
After initially enabling this feature, attempt was made to disable unsuccessfully.
System says that it saves this info, upon reboot, login screen shows up again.
Wifi toggle seems to work, as does Default GUI, & selecting default user |
|
93 | Base OS | Bug Report | Low | zaxxon first boot: don't ask for user prompt if already ... | Closed | |
Task Description
How to reproduce:
First boot, Pandora's Box has been opened. Prompt for Full name, username, and password.
Then, simply press OK without selecting whether minimenu or xfce. None selected. Then you can't do any more. Wizard closes and you don't need any more options.
After manual reboot, the wizard starts again and asks for name again. But the username already exists. |
|
95 | Base OS | Bug Report | Medium | Cannot Connect to Ad-Hoc WIFI | Closed | |
Task Description
I am Currently tethering my Mobile Network via my Android Phone
I cannot connect on this WIFI ... it's a Ad-Hoc connection
Everything else works, PC, Netbook's and iPod Touch
But Pandora seems to have some problems |
|
98 | Application | Bug Report | Medium | Pidgin freezes (msn) | Closed | |
Task Description
Pidgin freezes when using the msn protocol. Sometimes it can last 25 minutes before doing so, sometimes it freezes instantly. Usually it's after only a few minutes. Once it freezes you are still able to close it using the built in crash manager (?!)
This happens both when running from XFCE and Minimenu. |
|
99 | Core | Bug Report | Medium | After waking up from standby the system is not responsi ... | Closed | |
Task Description
If I resume after standby (moved the slider to the right), the pandora shows the desktop and I can move the mouse cursor but if I click something, nothing happens.
IRC suggested that the CPU might still be clocked at the standby low power speed. |
|
100 | Core | Bug Report | Low | Demos & Examples - remove from image | Closed | |
Task Description
/usr/bin/qt4/demos is 9Mb in size and /usr/bin/qt4/examples is 11Mb.
I'm guessing these are only useful for developers. Can they safely be removed?
edit: additionally, /usr/share/vim is 12M. Can those of us who are never going to use VIM remove it? |
|
102 | Base OS | Bug Report | Very Low | Pandora key does not close XFCE menu | Closed | |
Task Description
If the XFCE menu has been opened by a touchscreen command, it can also be closed by hitting the logo again. However, opening the menu this way and then hitting the Pandora key only spawns more instances of the menu. Least intrusive way to close those seems to be to select "Logout" and hit Cancel. |
|
107 | Base OS | Bug Report | Low | Secure Wifi will not connect until XFCE is loaded | Closed | |
Task Description
My Pandora is set to load MiniMenu on boot. I can't use any networked apps because wifi will not automatically connect on boot. XFCE needs to be loaded at least once so that i can enter my keychain password. Once i've entered my password Wifi connects and i can return to MiniMenu. |
|
109 | Core | Bug Report | Medium | Wifi looses connection after 20-30 minutes | Closed | |
Task Description
While logged into XFCE and browsing for an extended period the wireless will loose its connection. It will not reconnect until the Wifi is toggled off and back on again using the ToggleWifi application.
I have not tested this on an unsecured network. My wireless is WPA2 encrypted. |
|
114 | Application | Bug Report | Low | Chromium browser does not support HTTPS/SSL | Closed | |
Task Description
The Angstrom version of Chrome/Chromium web browser fails to open https links. This is a bug which has been fixed upstream, but not in the version packaged for Pandora. |
|
125 | Core | Bug Report | Low | wrong error handling in wl1251 platform initilization | Closed | |
Task Description
in
http://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blob;f=arch/arm/mach-omap2/board-omap3pandora.c;h=c6637426bf3a61f5bd0f85338304d0d8d114f67d;hb=HEAD
I see:
555 ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
556 if (ret < 0)
557 goto fail_nreset;
the goto should go to: fail_irq instead of fail_nreset
Denis |
|
126 | Application | Bug Report | Very Low | CPU Speed Typo? | Closed | |
Task Description
If you set the CPU speed to 600 it warns that it is greater than 600. I thought 600 was the guaranteed speed? |
|
127 | Application | Bug Report | High | Firefox hangs when selecting the menu bar | Closed | |
Task Description
Just try to do something by accessing the menu, either thru keyboard or ts and it hangs. Maybe a problem with bookmarks ? |
|
129 | Base OS | Bug Report | Medium | [PATCH] bluetooth script fails to store/restore bluetoo ... | Closed | |
Task Description
Patch to op_bluetooth.sh attached. |
|
131 | Core | Bug Report | Medium | bluetooth drivers read timeout too trigger-happy/logic ... | Closed | |
Task Description
Shamelessly plugged from the forums, to get proper bug tracking and notifications on this. My post:
@notaz:
+ /* there hould be no rx in progress at this point */
+ if (info->rx_skb != NULL) {
+ dev_err(info->dev, "Receive timed out, %i done, %li left, "
+ "LSR=%02x, IER=%02x\n", info->rx_skb->len + 1,
+ info->rx_count, hci_h4p_inb(info, UART_LSR),
+ hci_h4p_inb(info, UART_IER));
+ info->rx_timed_out = 1;
+ }
Could you share your rationale for that comment in drivers/bluetooth/hci_h4p/core.c? (Oh and there's a typo, too :P )
EDIT: Asking this because commenting that block out changed status of bluetooth (for me) from unusable (can receive ~20-500kB of data before ppp connection halting) to fully working - used to have big problems playing 32kbps AAC stream (max 2 min), now already 4 mins of 96kbps, but i still think we need some receive timeout mechanism, but this one (as it currently stands) doesnt work.
Notaz's reply:
I don't really remember, it was more than 1.5 years ago. That driver is a hack, will need to review it, does it work stable with that code removed?
My reply:
For the non-IRC people:
urjaman on IRC said:
(22:47:45) urjaman: notaz: about stability: i'm on irc atm with that driver, its been playing internet radio for a few hours without problems now, but i don know for sure.
(22:48:00) urjaman: *dont know
(22:50:11) urjaman: my logic: if the serial port _never_ misses a byte it should be ok - IMO scary without some receive timeout, but works for me |
|
132 | Base OS | Bug Report | Medium | Deleting big files doesn't work | Closed | |
Task Description
When deleting a file on the SD card, the Pandora OS moves it into the thrash folder in the internal memory. That itself isn't very nice (shouldn't there be a trash folder on the SD card as well, to reduce unnecessary copying?), but if the file is too big for the internal memory, a error message appears, and the file cannot be deleted on the Pandora directly. |
|
134 | Core | Bug Report | Low | please add a working phonon backend | Closed | |
Task Description
Please see : http://www.gp32x.com/board/index.php?/topic/54831-minitube/page__view__findpost__p__883993
:) |
|
136 | Core | Bug Report | High | rather high battery discharge while Pandora is powered ... | Closed | |
Task Description
The Pandora does seem to use too much energy while it is turned off. A testcase: The pandora was turned off over night (about 8 hours) and battery state dropped from 98% to 96%. When removing the battery from the pandora for the same amount of time, the state is not changed at all.
This is based on the zaxxon firmware release with hotfix3, beta2.
Problem: if you don't use the pandora for a while and forget to remove the battery you can cause a deep discharge which might damage the battery. This is also a problem if the Pandora does eg shutdown itself since power is out and you can't directly attach it to a charger.
Possible causes:
* Design fault in the board.
* Too much powered on while the device *should* be completely powered off. The only things that should get power are the clock and the power button. This should basically not drain much.
Regarding the clock: The PalmPre is based on the OMAP3, too. There you basically have no discharge when it is powered off, so it is unlikely that the fault is in the OMAP3 itself. |
|
139 | Base OS | Bug Report | Low | Space should not be accepted in hostname | Closed | |
Task Description
http://www.gp32x.com/board/index.php?/topic/54878-embarassingly-nooby-questions-from-a-new-pandora-owner/page__view__findpost__p__885235
If the user names their Pandora using a space in the name, "This will prevent Xfce from operating correctly". Should trap this when asking for a host name. |
|
141 | Base OS | Bug Report | High | When using an unlabeled SD card, Hotfix3 final can't un ... | Closed | |
Task Description
I had beta 1 of hotfix 3, and there turning the pandora into a cardreader worked fine for that card. However, I just installed the latest hotfix 3 final, but that one fails to unmount. Attached is the pndrunop_storage.out. Apparently something's going wrong with the splitting of the partition name, as it tries to unmount /dev/mmcblk0 instead of /dev/mmcblk0p1
Manually unmounting it by using sudo umount /dev/mmcblk0p1 does work, but then I can't use the tool because that apparently only lists mounted memorycards. |
