|
141 | Base OS | Bug Report | High | When using an unlabeled SD card, Hotfix3 final can't un ... | Closed | |
Task Description
I had beta 1 of hotfix 3, and there turning the pandora into a cardreader worked fine for that card. However, I just installed the latest hotfix 3 final, but that one fails to unmount. Attached is the pndrunop_storage.out. Apparently something's going wrong with the splitting of the partition name, as it tries to unmount /dev/mmcblk0 instead of /dev/mmcblk0p1
Manually unmounting it by using sudo umount /dev/mmcblk0p1 does work, but then I can't use the tool because that apparently only lists mounted memorycards. |
|
76 | Core | Bug Report | High | Wifi connection lost under high CPU load | Closed | |
Task Description
I noticed that when I tried Quake 3 a while back that I would lose my internet connection. Only the very first time I tried it did it ever find a couple thousand servers and let me join a map. Since then, it always dies and I never see any servers.
I wasn't too concerned yet because maybe it's just Q3 doing something but tonight mplayer was running full screen and then suddenly it started chugging and the network manager popped up that it was trying to connect (spinning logo at the bottom). Since you only get one shot at network manager per boot, it was a lost cause.
The correlation I make here was that I'm sure the CPU was under heavy load for both cases but I haven't tried other programs to see what happens. I didn't have any games on this card tonight. Can anyone repeat this problem or is it a known issue? |
|
8 | Core | Bug Report | High | WiFi doesn't work | Closed | |
Task Description
Error inserting /lib/modules/2.6.27-omap1/kernel/drivers/net/wireless/wl12xx/wl1251_sdio.ko: -1 Unknown symbol in module |
|
144 | Core | Bug Report | Low | Wifi LED does not always get re-activated after enablin ... | Closed | |
Task Description
Wifi LED does not always get re-activated after enabling wifi.
It seems that the led trigger which ought to be set to [phy0dadio] no longer exists and the phy# seems to increment (up to at least 11 I have observed)
If I set the trigger to phy##radio then the notification works again, but I'm not sure of the best way to fix this. I suppose a quick hack to the wl1251-init script is the place to start. |
|
313 | Core | Bug Report | Low | WiFi LED Not Triggered on First Activation | Closed | |
Task Description
The first time WiFi is enabled after boot, using either the the config button menu or the Toggle WiFi menu option the WiFi LED does not light up. (though the WiFi itself does work)
Once it has been enabled and disabled for the first time, it will work normally for subsequent uses of the WiFi toggle.
If the Toggle WiFi script is launched for the first time from the terminal the LED does light up.
This is the case in SuperZaxxon 1.53 with all current upgrades applied, and reportedly since the introduction of SuperZaxxon.
checking /sys/class/leds/pandora::wifi/trigger while the WiFi is enabled but the LED off shows that the trigger has been successfully set to phy0radio
Also noted while investigating this:
If Wifi is enabled for the first time from the terminal the following errors are generated by /etc/init.d/wl1251-init
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
Usage: insmod filename [args]
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
The commands that generate these errors are only executed if the mac80211 module is not already loaded - and that module is not unloaded when wifi is disabled. This seems to be unrelated to the issue being reported, however I can't see any cause for the issue at all, so I figured it was worth including it in the report anyway. |
|
109 | Core | Bug Report | Medium | Wifi looses connection after 20-30 minutes | Closed | |
Task Description
While logged into XFCE and browsing for an extended period the wireless will loose its connection. It will not reconnect until the Wifi is toggled off and back on again using the ToggleWifi application.
I have not tested this on an unsecured network. My wireless is WPA2 encrypted. |
|
140 | Core | Bug Report | High | WiFi Starts off fast then slows down | Closed | |
Task Description
When downloading files using a browser or wget or when attempting to stream videos we see a fast initial burst which then slows down dramatically.
see following topics for more details and actual user stats.
http://www.gp32x.com/board/index.php?/topic/54340-post-your-speed-over-wifi/
http://www.gp32x.com/board/index.php?/topic/54921-you-tube-through-vlc/
http://www.gp32x.com/board/index.php?/topic/54831-minitube/
http://www.gp32x.com/board/index.php?/topic/54901-possible-wifi-issues/ |
|
308 | Core | Bug Report | Low | Wireless Network being dropped asks for password | Unconfirmed | |
Task Description
When a Wireless Network that is dropped because its signal strength isn't that good gets reconnected to, I am being asked to re-input the password for that network. It would be nice if it just used the password I gave to it when it was able to connect without popping up that dialog box. |
|
125 | Core | Bug Report | Low | wrong error handling in wl1251 platform initilization | Closed | |
Task Description
in
http://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blob;f=arch/arm/mach-omap2/board-omap3pandora.c;h=c6637426bf3a61f5bd0f85338304d0d8d114f67d;hb=HEAD
I see:
555 ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
556 if (ret < 0)
557 goto fail_nreset;
the goto should go to: fail_irq instead of fail_nreset
Denis |
|
219 | Core | Bug Report | Medium | wrong owner of /home/user/Desktop | Closed | |
Task Description
I just reflashed with HF5, and it turns out that I cannot make shortcuts on the desktop. It is very simple to fix:
sudo chown janek.janek Desktop/
I remember that this bug was also present in HF4, I fixed it so quickly that I didn't even remember to report it. |
|
36 | Core | Bug Report | Low | X doesn't restart in No-X mode (pnd_run.sh) | Closed | |
Task Description
At the end of the script, it calls /etc/init.d/slim-init-init start
If you fix that to /etc/init.d/slim-init start , X restarting works again.
Please apply this fix into the GIT. |
|
173 | Core | Bug Report | High | X uses 100% cpu in low power mode | Closed | |
Task Description
After 10 minutes in low power mode X seems to go nuts and use 100% CPU. Obviously this is bad ;-) 14MHz isn't *that* slow, so there's obviously something getting wedged.
I haven't been able to figure out exactly what's happening, but the fact that it always occurs after exactly 10 minutes suggests its power management related. Maybe we're getting stuck trying to kick off the screensaver, or something?
Hacking op_power.sh do disable screen blanking shows that, unsurprisingly, the screen freezes at the same time X goes AWOL.
Pressing the power switch brings the device out of low power mode, though there is often a few seconds additional delay as the event handling scripts take longer than normal to run because the CPU is already busy.
I've attached the results of
top -b -d 60 > toplog &
while sleep 60 ; do cat /proc/loadavg; done > loadlog |
|
31 | Core | Bug Report | High | X11 Crashing with omapfb | Closed | |
Task Description
Cleaned up a bit.
* Mouse is inverted if you run SDL Games from the console.
* Mouse is not properly calibrated when you run SDL Games under X fullscreen. Fixed with notaz patch that also fixes the X11-Crash with omapfb (see below)
Regarding the X11-Crash when using SDL-Fullscreen-Apps together with omapfb:
notaz nailed down the problem: It's actually xf86-input-tslib's fault-
omapfb only acted as catalizator here, causing SDL to use different code path and call different X functions.
His patch also almost increases the touchscreen problem (see above): It runs perfect for games in 800x480.
However, on small issue is left on apps with lower resolution which use their own mouse cursor:
As soon as you move the mouse outside of the game resolution (i.e. SuperTux runs 640x480), the mouse cursor stops at the end of the virtual screen and you have an offset.
This only seems to happen when the game uses it's own mouse cursor. If you go to the level editor of SuperTux and leave, the normal X cursor appears and the problem doesn't occur anymore.
So this is probably something that needs to be fixed in the game, not in the driver.
A compiled version (for testing):
http://notaz.gp2x.de/tmp/tslib_drv.so --- needs to be copied here: /usr/lib/xorg/modules/input/tslib_drv.so |
|
52 | Core | Bug Report | Medium | X11-Touchscreen: Fullscreen-Issue when the mouse cursor ... | Closed | |
Task Description
There are some issues with the touchscreen using X11 and fullscreen apps which use their own mouse cursor.
The mouse cursor tends to shift around when it comes outside of the normal screen area.
This can be seen with SuperTux: The mouse cursor is a penguin. Move that close to the edge of the screen and it jumps around and then is shifted to the real touchscreen.
Thanks to a bug in SuperTux, this can also be fixed: Go into the Level Editor and go back into the main menu:
On top of the penguin mouse cursor is the normal X mouse cursor, which will not Shift anymore.
Aditionally, I tried the Hatari Menu (running on 640x480) and AlephOne (running on 800x480).
Both use the standard X mouse cursor and both are working fine.
I guess that the mouse cursor gets confused if it has negative values. |
|
211 | Core | Bug Report | Low | x11vnc server (in xfce menu - > network) does not work! | Closed | |
Task Description
x11vnc launcher in xfce menu -> network does not work.
can this be fixed please. |
|
328 | Core | Bug Report | Low | XFCE desktop icons not displayed when logging on too qu... | Requires testing | |
Task Description
It looks like XFCE cannot find the icons for links/launchers on the desktop, when the user logs on too quickly. This happens either when the session chooser at start-up is disabled, or when the session is being chosen quickly after the session chooser is being displayed (e.g. by pressing enter as soon as the chooser window pops up). The icons are probably not generated yet at that time point.
A simple workaround is adding the command "xfdesktop --reload" to autostart. Couls this be included in the next SuperZaxxon release or a hotfix? |
|
326 | Core | Bug Report | Low | XFCE menu not expandingl with stylys and scrolling brok... | Unconfirmed | |
Task Description
The XFCE menu does not always show submenues like "Emulators" when being clicked on with the stylus. It only works if the click lasts long or after all menues have been clicked at once with a long click.
Also, tipping on a scroll arrof of menues that are higher than the screen causes the click to be registered as a "click and hold". This leads to the menu being scrolled all the way to the end. |
|
89 | Base OS | Bug Report | Medium | XFCE not loading up defaults when MiniMenu is selected ... | Closed | |
Task Description
When mini menu is set to the default menuing system, XFCE settings (selected theme, pandora-specific key bindings) do not get loaded by default, they need to be forced by opening a terminal and typing xfwm4 --replace |
|
162 | Core | Bug Report | Medium | XFCE Setting date | Closed | |
Task Description
The tool to setup the date/time in XFCE doesn't work properly :
- Menu -> Settings -> Date and Time
- The tool show up
- Select the time zone
Now an error window spam every seconds... |
|
51 | Core | Bug Report | Medium | xfce4-battery-plugin: No time and no AC working | Closed | |
Task Description
xfce4-battery-plugin currently displays the % of the battery, but it doesn't show the time (or does it need a while to figure out how much time is left?)
Also, it doesn't realize when AC is connected.
I did do a sudo poweroff when power was below 5%. When it first powered down, I connected the AC and restarted. The plugin immediately powered down again, as it didn't know AC was connected. |
|
27 | Core | Bug Report | Low | xfce4-brightness-plugin: 0 isn't a good minimum value | Closed | |
Task Description
The xfce4-brightness-plugin can be set to a minimum of 0.
This is kinda confusing to the normal user, as it makes the screen totally black.
Maybe this could be changed to a minimum of 3? |
|
74 | Core | Bug Report | Medium | xfce4-mouse-settings: Fix the check for Xi so it does n ... | Closed | |
Task Description
The xfce4-mouse-settings don't work on the Pandora, because they report "XI is not present or too old"
This is a known bug and there already is a fix for it:
http://www.mail-archive.com/xfce4-commits@xfce.org/msg09395.html |
|
185 | Core | Bug Report | Low | Xorg driver should not be dependant on user environment | Unconfirmed | |
Task Description
The patch implementing screen blanking uses the /usr/pandora/scripts/op_lid.sh script to control LCD backlit:
http://git.openpandora.org/cgi-bin/gitweb.cgi?p=openembedded.git;a=blob;f=recipes/xorg-driver/xf86-video-omapfb/pandora_backlight_dim.patch;h=4a0b8432d083c6e7297192a2920c7a777ae3d098;hb=16f3fff44323bd6b4349d909667b51a2fef3f278
The same result can be achieved by using the sys interface:
/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/bl_power
This approach makes driver independent on particular distribution. The proposed patch is attached. |
|
93 | Base OS | Bug Report | Low | zaxxon first boot: don't ask for user prompt if already ... | Closed | |
Task Description
How to reproduce:
First boot, Pandora's Box has been opened. Prompt for Full name, username, and password.
Then, simply press OK without selecting whether minimenu or xfce. None selected. Then you can't do any more. Wizard closes and you don't need any more options.
After manual reboot, the wizard starts again and asks for name again. But the username already exists. |
|
129 | Base OS | Bug Report | Medium | [PATCH] bluetooth script fails to store/restore bluetoo ... | Closed | |
Task Description
Patch to op_bluetooth.sh attached. |
|
305 | Core | Bug Report | Low | [PATCH] bluetooth startup doesnt restore enabled state | Closed | |
Task Description
op_bluetooth.sh doesnt remember to call op_bluetooth_work.sh in the startup case. Patch inlined here (maybe broken, but for fast reading) and behind link: http://urjaman.dyndns.info/bluetooth-startup-fix.patch
--- op_bluetooth.sh.org 2012-11-24 01:54:53.000000000 +0000
+++ op_bluetooth.sh 2012-11-24 02:06:51.000000000 +0000
@@ -7,8 +7,13 @@
cd "$HOME"
if [ "$1" = "startup" ]; then
- [ -f "$LOCK" ] && sudo /usr/sbin/hciconfig "$INTERFACE" up pscan 1>/dev/null && sudo /usr/sbin/bluetoothd || echo "Bluetooth: User has not enabled Bluetooth."
-
+ if [ -f "$LOCK" ]; then
+ sudo /usr/pandora/scripts/op_bluetooth_work.sh 1
+ INTERFACE="`hciconfig | grep "^hci" | cut -d ':' -f 1`"
+ sudo /usr/sbin/hciconfig "$INTERFACE" up pscan 1>/dev/null && sudo /usr/sbin/bluetoothd
+ else
+ echo "Bluetooth: User has not enabled Bluetooth."
+ fi
else
# Figure out if Bluetooth is running or not |
|
197 | Core | Bug Report | High | [PATCH] Fix opp if booting with wrong settings in hw | Closed | |
Task Description
Hi,
This should help with cases like this
http://www.gp32x.com/board/index.php?/topic/57303-overclocking-broke-my-pandora/
Patch attached. |
|
311 | Core | Bug Report | Medium | [PATCH] Thunar configurable trash | Closed | |
Task Description
Not my work, but since I think my reply to ED on the forums will get buried I made this report.
The post with patch: http://boards.openpandora.org/index.php/topic/11189-its-arrived-questions/?p=210363 |
|
192 | Core | Bug Report | Medium | [U-Boot] ext2fs_devread() read error - block (boot from ... | Closed | |
Task Description
[U-Boot] ext2fs_devread() read error - block
Description:
Formatted two different Transcend 8GB SD cards as EXT2 using both GParted and also with Mkfs.ext2, extracted pandora-rootfs.tar.bz2 to the root of the SD and added 'autoboot.txt' as described here: http://openpandora.org/firmware/README.txt
This issue appears to be same as mentioned here, looks like a patch maybe required in drivers/mmc/omap3_mmc.c):
http://lists.denx.de/pipermail/u-boot/2010-June/072198.html
Output on boot :
mmc1 is available
reading autoboot.txt
** Unable to read "autoboot.txt" from mc1 0:1 **
Loading file "autoboot.txt" from mmc1 device 0:! (xxa1)
184 bytes read
** Executing plain script at 82000000
Loading file "/boot/uImage-2.6.27.46-omap1" from mmc device 0:1 (xxa1)
** ext2fs_devread() read error - block
** Unable to read "/boot/uImage-2.6.27.46-omap1" from mmc 0:1 **
## Booting kernel from Legacy Image at 8030000 ...
Image Name: Angstrom/2.6.27-pandora+r21+git4
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2325740 Bytes = 2.2 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!
syntax error |
|
65 | Core | Feature Request | Very Low | .desktop files, be nice if they included the non-englis... | New | |
Task Description
.desktop files only include the English stuff right now (using the .desktop default tags.)
Be nice if in addition to 'title', we also include 'title[de]' type extras, whatever is in the PXML.xml
pnd_pxml_t includes all the goods, but pnd_disco_t has only the summarized english stuff. |
|
113 | Core | Feature Request | Low | Add aliases for bash, eg ll for ls -l. Just uncommentin ... | Closed | |
Task Description
Aliases like ll for "ls -l" are common. They are super useful on the Pandora (less to type, no Fn key needed).
The .bashrc already includes them but they are commented. Please enabled the ls aliases and colored output. I do not think enabling the "-i" aliases too would be a good idea. |
|
212 | Core | Feature Request | Low | Add curl to core installed programs | Closed | |
Task Description
I wish for curl to be installed by default on the upcoming pandora FWs,
As reported by the angstrom repo, where I install using the command:
$sudo su
...
#opkg update
#opkg install curl
curl 7.21.2-r4.0.9 is 78.57 Kilobytes with the dependencies
Depends:libcurl4, libgnutls26, libgcrypt11, libgpg-error0, libc6, libz1
I do not know which is installed by default, but I'm sure libc6 is, so I'm going to state the info on the rest of the packages for its memory space usage on the NAND
libcurl4(142.99 Kilobytes):
Command line tool and library for client-side URL transfers.
Depends:libc6, libgnutls26, libz1, libgcrypt11, libgpg-error0, as you can see, it has the same dependencies as above, so it seems both curl and libcurl are probably exclusive from the others, but I will go forward and state the rest of the dependencies
libgnutls26 2.8.6-r10.0.5 (291.44 Kilobytes)
Depends:libz1, libgcrypt11, libgpg-error0, libc6, (again, it looks like the above depends on this)
libgcrypt11 1.4.1-r0.9 (220.35 Kilobytes)
Depends: libgpg-error0, libc6, (Oh look, we're not looking at libz1 anymore)
libgpg-error0 1.4-r7.1.9 (5.78 Kilobytes)
Depends:libc6
now to the lone libz1
libz1 1.2.3-r7.0.9 (41.95 Kilobytes)
Depends:libc6
So, in the case we already have the gpg stuff, then the installation is only 221.56KB, however, with the zlib and the gpg included, the total comes to 781.08KB
So, now that the cost is out of the way, What are the goods and bads?
Good:
Its a very versatile CLI program to get and send information over http through the network, and is tolerant of network issues
It doesn't take too much space relative to things that have been pulled out, like abiword.
The libcurl is a very good library, and could be of great benefit to some future projects.
Bad:
Well, we already have wget, which is not as configurable, and wget hates Craig's appstore
Here's the link to curl on the repo
http://www.angstrom-distribution.org/repo/?pkgname=curl |
|
161 | Base OS | Feature Request | Low | Add ftp to base OS | Closed | |
Task Description
Include the netkit-ftp package so the Pandora has at least basic ftp functionality out of the box. |
|
288 | Core | Feature Request | Low | add functionality to inputrc | Unconfirmed | |
Task Description
Since the default inputrc doesn't contain any functionality (simple cli movements like ctrl-left or crtrl-right to skip words don't work) this diff may be useful to add to the cli-experience. I've also been trying to get the delete-key to work, but this is apparently already a known issue (see FS#227). I can remove this from the diff if you want. (I couldn't attach a file to the task somehow)
31,32c31,33
< # "\e[3~": delete-char
< # "\e[2~": quoted-insert
---
> #"\e[3~": delete-char
> "\e[^?": delete-char
> "\e[2~": quoted-insert
44,47c45,50
< # "\e[5C": forward-word
< # "\e[5D": backward-word
< # "\e\e[C": forward-word
< # "\e\e[D": backward-word
---
> "\e[1;5C": forward-word
> "\e[1;5D": backward-word
> "\e[5C": forward-word
> "\e[5D": backward-word
> "\e\e[C": forward-word
> "\e\e[D": backward-word |
|
217 | Application | Feature Request | Low | Add Mounting and unmounting context options for PND's | Unconfirmed | |
Task Description
It'll have to be in the SKEL.
/etc/skel/Applications/Settings/Thunar/uca.xml
People can replace the contents of their current uca.xml file with the following to gain this functionality now.
/home/[USERNAME]/Applications/Settings/Thunar/uca.xml
Terminal
Open Terminal Here
exo-open --working-directory %f --launch TerminalEmulator
Example for a custom action
*
emblem-symbolic-link
Mount PND
/usr/pandora/scripts/pnd_run.sh -p %f -m && thunar /mnt/utmp/
*.pnd;*.PND
gtk-jump-to-rtl
Unmount PND
/usr/pandora/scripts/pnd_run.sh -p %f -u
*.pnd;*.PND |
|
118 | Base OS | Feature Request | Low | add sdl-perl to the base OS | Unconfirmed | |
Task Description
Hi there,
Many games depend on sdl-perl. Perl and sdl are part of the base OS, but not not the connection between the two.
Cheers,
sebt3 |
|
133 | Base OS | Feature Request | Low | Add TiMidity++ to OS? | Closed | |
Task Description
Hey, was just wondering if it would be possible to have TiMidity++ (http://timidity.sourceforge.net/) added with a hotfix, would allow games/ports that use it (the Zelda ports here: http://www.gp32x.com/board/index.php?/topic/54633-zelda-kind-of), zdoom and heretic (I think unless pickles has changed them) and other stuff that uses it to not have to include it in the .pnd and saving SD space... just an idea... |
|
90 | Base OS | Feature Request | Low | Adding more "general libs" to the OS image | Closed | |
Task Description
It would be nice if some more generic libs that could be used by software ported to the Pandora would be available in the base image. For example for Wesnoth we do require these additional libs (names taken from http://www.angstrom-distribution.org/repo/?pkgname=boost ):
* boost-iostreams
* boost-regex
* boost-serialization
Beside this Wesnoth does also require this package (from http://www.angstrom-distribution.org/repo/?pkgname=lua5.1 ):
* lua5.1
In general I would recommend pulling in all of boost. This means the dependencies as well as the recommends. Here is a short paste of what this means:
Depends:
libc6, libstdc++6, libgcc1, boost-filesystem, boost-thread, boost-date-time, boost-system
Recommends:
boost-date-time, boost-filesystem, boost-graph, boost-iostreams, boost-program-options, boost-python, boost-regex, boost-serialization, boost-signals, boost-system, boost-test, boost-thread
There are probably some other packages/lib that might make sense to directly have in the OS image, but they currently don't come to my mind, so I can't list them here. ;) |
|
106 | Application | Feature Request | Very Low | AppData corruption | Unconfirmed | |
Task Description
The appdata folder was corrupted on my SD card from an unclean eject this made the folder read only until i ran a repaired it. MiniMenu still displayed all my PND files.
When clicking to launch the app would try to load crash and then return to MiniMenu without any visible error. This was pretty confusing and i thought it might be a good fix for a troubleshooting guide. |
|
156 | Base OS | Feature Request | Very Low | Ask to format SD Card | Unconfirmed | |
Task Description
When I have received my Pandora, I got an SD Card but it was not formated. I didn't have any card reader so I didn't now what was wrong (the Pandora or the SD Card).
When an unformated SD Card is inserted in the Pandora, it should be nice to ask if we want to format it. |
|
17 | Core | Feature Request | Low | Backlight off when display shuts off | Closed | |
Task Description
Would it be easy to make the backlight shut off when the screen goes off after a period of inactivity? That would save a lot of energy both during the charge cycle and if left on with a battery running.
Thanks! |
|
226 | Core | Feature Request | High | Boot from /dev/sda devices requested | Closed | |
Task Description
Boot from usb hard disk not supported. This should be a rather simple fix of adding the sdx devices and adjust the boot scripts??
I was able to put this autoboot.txt on mmc 0:1
setenv bootargs debug root=/dev/sda1 rw rootdelay=2 console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
ext2load sda 0:1 0x80300000 /boot/uImage
bootm 0x80300000
This failed with amongst other things "Block device sda 0 not supported" and something about failing to load kernel
So I then changed the autoboot file to this
setenv bootargs debug root=/dev/sda1 rw rootdelay=2 console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
ext2load mmc 0:3 0x80300000 /boot/uImage
bootm 0x80300000
All this did was die after the kernel loaded.
I believe I could much better make use of this device if I could boot from some faster storage, please advise :) |
|
245 | Core | Feature Request | Low | BugTracker: Submitter shall be able to edit bug after p ... | Closed | |
Task Description
I accidentally posted a "feature request" as a "bug report" within the FlySpray BugTracker.
I wanted to correct my mistake.
It was not possible to edit it.
I assigned the bug to myself.
Then I could edit it.
But now I cannot un-assign it from me.
I merely wanted to suggest a feature but not take development responsibility (yet).
For original submitters, who later realize a mistake in their post, there should be a possibility to correct their mistake.
Please un-assign me from #237 #241 #243 and this one #245. Thanks. |
|
307 | Core | Feature Request | Medium | Change how Automatic Shutdown works | Unconfirmed | |
Task Description
When thee Pandora is shutting down because its almost out of power, it should check to make sure that the nub inputs are set to the default mode (which is mouse movement for the left nub and mouse buttons for the right nub). If not, it should change them to be like that. |
|
234 | Core | Feature Request | Medium | Changeable behaviour when closing the lid | Closed | |
Task Description
As it was requested on forum.gp2x.de and I think it's a good idea I've written some scripts to allow the user to change what happens when the lid is opened/closed.
There are 3 Settings:
-The old behaviour (turning off the screen)
-Go into low power mode
-Shutdown
Default behaviour is still the same: Turn the screen off. Maybe we could change this to low power mode? I don't know.
I made a lot of changes to op_lid.sh: http://pastebin.com/GT3qxWSx (diff: http://pastebin.com/Z8GwpDj8 )
I changed line 11 in op_power.sh to: if [ $powerstate -ne 0 ]; then
And wrote a gui for changing the setting using zenity: http://pastebin.com/9JvSTqfQ
(I still can't upload any files, don't know if it's the fault of my browser, that's why I use this paste service) |
|
327 | Core | Feature Request | Low | Context menu for the XFCE menu | Unconfirmed | |
Task Description
Right now. the XFCE menu handles right clicks like left clicks. It would be more logical to either not do anything on a right click, or open a context menu that e.g. lets the user generate a link to an application on the desktop. |
|
96 | Base OS | Feature Request | Low | Customizable SD mount options | Closed | |
Task Description
Right now writes are really slow because they write synchronously: there should be an option to change this so that the user is first taught how to unmount an sd card then remove it... |
|
137 | Base OS | Feature Request | Low | Default vim config | Closed | |
Task Description
The current vim install does come without any config file. By default this means vim does work in "vi compatible mode" which makes it hardly usable. The attached config file is meant to be used as ~/.vimrc, so it should be added to "/etc/skel/.vimrc". The file is partly based on the default config used by gentoo.
Things this config file sets:
* Start in "vim mode" by default
* activate ruler
* set width of linenumber in ruler
* assume that the terminal uses a dark background
* configure what hitting backspace removed (newlines, ...)
* some magic to have different encoding formats working in a more sane way |
|
119 | Base OS | Feature Request | Low | ext4 support | Closed | |
Task Description
Don't know how much work this would be to get a later version of the linux firmware to add this, but it would be nice to have more filesystem support. |
|
250 | Application | Feature Request | Medium | File Browser Thunar - Trashing file crosses filesystem ... | Researching | |
Task Description
Trashing a file/folder seems to MOVE it to a certain trash directory on the MAIN VOLUME, rather then the ORIGINATING VOLUME, hence this can result in a COPY RATHER THAN A MOVE operation, if the trashed file originates from a filesystem other than the main filesystem!
This is very inefficient and faulty as it is:
a) Very time consuming
b) And in case of large files this operation can even fail due to not enough free space on the main volume. |