|
53 | Core | Bug Report | Low | Non-X Touchscreen: Inverted axis | Closed | |
Task Description
Running SDL-Apps in Non-X mode have inverted axis. |
|
54 | Core | Feature Request | High | Make it possible to enable / disable keyboard mappings ... | Closed | |
Task Description
Some stuff (UAE4ALL, SuperTux, etc.) is having problems because ABXY and DPAD are mapped to keyboard buttons.
I guess this will lead to more problems in the near future with SDL apps, so it should be configurable to enable / disable the keyboard -> DPAD / ABXY mappings.
Maybe this could be included into libpnd? |
|
55 | Core | Bug Report | Critical | .xinitrc problems (image from Feb 22nd) | Closed | |
Task Description
Loading a GUI from slim fails, as .xinitrc is broken.
Seems to have been edited using a windows editor? From line 50 on, there are newline characters that shouldn't be there.
Removing them makes XFCE4 loading fine. |
|
56 | Core | Bug Report | Medium | Movie Playing (Totem, VLC and MPlayer) | Closed | |
Task Description
Not really a bug report, just an information what issues what player has (tested using image from Feb 22nd).
MPlayer is missing a library in this image:
libxxf86dga1
Installing that one manually does make it work.
* VLC:
Plays things, but switching to fullscreen and back causes VLC to start having issues.
I wouldn't recomment VLC.
* Totem:
Works well (fullspeed video playing) when you disable the sidebar.
With the sidebar enabled, it doesn't play videos in fullscreen.
Menus are behind the video overlay as well as the controls in fullscreen mode (which is a bummer).
Needs about 10% more for the same movie than MPlayer (and therefore, stutters more often when mmcqd eats up CPU power)
* MPlayer:
Works well (fullspeed video playing) when video out is set to XV.
Audio out needs to be set to OSS. If set to Alsa, it segfaults when scrubbing around or doing a fast forward (see segfault below).
Runs very well in fullscreen, including controls on the bottom.
Does have issues displaying videos in windows (usually shows black, unless you resize the window).
Cache should be set to 40000. This will almost remove the stuttering when mmcqd accesses the SD card.
Menu is behind the video stream as well.
Only bad thing about Gnome MPlayer is, that you can't run it in fullscreen automatically when a video is loaded.
So basically, MPlayer is the best we have at the moment.
Fullscreen is really working flawlessly. Maybe we could change Gnome MPlayer to some fullscreen GUI (like the MPlayer for the Wii, etc.).
For a first release, it already works well enough.
Just need to make sure we include default settings as described above (most important: OSS sound!)
In case anyone wants to debug, here is the segfault that happens when using ALSA and fast forwarding:
[ 976.602203] Unable to handle kernel paging request at virtual address ffc84000
[ 976.609466] pgd = cf770000
[ 976.612182] [ffc84000] *pgd=8f842011, *pte=00000000, *ppte=00000000
[ 976.618530] Internal error: Oops: 807 [#1]
[ 976.622650] Modules linked in: g_cdc pvrsrvkm ipv6 ads7846 hwmon
[ 976.628723] CPU: 0 Not tainted (2.6.27-omap1 #1)
[ 976.633758] PC is at memset+0x30/0xc0
[ 976.637420] LR is at 0x0
[ 976.639984] pc : [] lr : [] psr: 20000093
[ 976.639984] sp : cf5abe04 ip : 00000000 fp : cf5abe24
[ 976.651519] r10: ffffe0a4 r9 : 00001d4c r8 : 00004c3b
[ 976.656799] r7 : ffffe0a4 r6 : cf8975c0 r5 : ffffc148 r4 : cfaed400
[ 976.663360] r3 : 00000000 r2 : 1ff8b350 r1 : 00000000 r0 : ffc83ffc
[ 976.669921] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
[ 976.677185] Control: 00c5387f Table: 8f770018 DAC: 00000015
[ 976.682952] Process mplayer (pid: 1781, stack limit = 0xcf5aa2e8)
[ 976.689086] Stack: (0xcf5abe04 to 0xcf5ac000)
[ 976.693481] be00: c02b4e00 cfae0a00 cfaed400 00005007 cf8975c0 cf5abe5c cf5abe28
[ 976.701873] be20: c02b2f74 c02b4da4 cf8975c0 cf5abe38 c0066db0 cfaed400 00005007 cf8975c0
[ 976.710235] be40: 00004c3b cf8975c0 00001d4c 00000000 cf5abe7c cf5abe60 c02b36f8 c02b2d94
[ 976.718627] be60: 00001d4c cfaed400 cf8975c0 00000000 cf5abecc cf5abe80 c02b3b50 c02b362c
[ 976.726989] be80: c00699fc c00382ac cf5abeb0 00000000 00ecdda0 00000000 cf5abee4 cf5abea8
[ 976.735382] bea0: c006a104 00001d4c 400c4150 cf8975c0 bef6050c c002ee44 cf5aa000 00000000
[ 976.743774] bec0: cf5abeec cf5abed0 c02b3dbc c02b3ac8 c02b31c4 bef6050c c002ee44 00000000
[ 976.752136] bee0: cf5abf1c cf5abef0 c02b1188 c02b3d64 c04ae8a0 00000000 00ecdda0 00001d4c
[ 976.760528] bf00: bef6050c 400c4150 bef6050c cf778760 cf5abf34 cf5abf20 c02b1504 c02b10d4
[ 976.768890] bf20: cf5abf5c cf778760 cf5abf54 cf5abf38 c00aa8ac c02b14d0 bef60548 cf778760
[ 976.777282] bf40: bef6050c 00000007 cf5abf7c cf5abf58 c00aab4c c00aa880 c0066e74 bef60548
[ 976.785675] bf60: cf5abf80 00000007 bef6050c 400c4150 cf5abfa4 cf5abf80 c00aaba4 c00aa8fc
[ 976.794036] bf80: 4b82cf18 00000000 00da2268 00da22b8 00000000 00000036 00000000 cf5abfa8
[ 976.802429] bfa0: c002ecc0 c00aab70 00da2268 00da22b8 00000007 400c4150 bef6050c bef6050c
[ 976.810821] bfc0: 00da2268 00da22b8 00000000 00000036 00d40628 00000000 00000000 00871348
[ 976.819183] bfe0: 00887178 bef60508 4012354c 4071963c 60000010 00000007 b601206b df08c3ff
[ 976.827575] Backtrace:
[ 976.830047] [] (snd_pcm_format_set_silence+0x0/0x13c) from [] (snd_pcm_playback_silence+0x1ec/0x2ac)
[ 976.841033] r6:cf8975c0 r5:00005007 r4:cfaed400
[ 976.845703] [] (snd_pcm_playback_silence+0x0/0x2ac) from [] (snd_pcm_update_hw_ptr+0xd8/0x1b4)
[ 976.856140] [] (snd_pcm_update_hw_ptr+0x0/0x1b4) from [] (snd_pcm_lib_write1+0x94/0x23c)
[ 976.866058] r7:00000000 r6:cf8975c0 r5:cfaed400 r4:00001d4c
[ 976.871765] [] (snd_pcm_lib_write1+0x0/0x23c) from [] (snd_pcm_lib_write+0x64/0x70)
[ 976.881256] [] (snd_pcm_lib_write+0x0/0x70) from [] (snd_pcm_playback_ioctl1+0xc0/0x3fc)
[ 976.891174] r4:00000000
[ 976.893737] [] (snd_pcm_playback_ioctl1+0x0/0x3fc) from [] (snd_pcm_playback_ioctl+0x40/0x44)
[ 976.904083] r7:cf778760 r6:bef6050c r5:400c4150 r4:bef6050c
[ 976.909820] [] (snd_pcm_playback_ioctl+0x0/0x44) from [] (vfs_ioctl+0x38/0x7c)
[ 976.918853] r4:cf778760
[ 976.921417] [] (vfs_ioctl+0x0/0x7c) from [] (do_vfs_ioctl+0x25c/0x274)
[ 976.929748] r6:00000007 r5:bef6050c r4:cf778760
[ 976.934417] [] (do_vfs_ioctl+0x0/0x274) from [] (sys_ioctl+0x40/0x64)
[ 976.942657] r6:400c4150 r5:bef6050c r4:00000007
[ 976.947326] [] (sys_ioctl+0x0/0x64) from [] (ret_fast_syscall+0x0/0x2c)
[ 976.955749] r7:00000036 r6:00000000 r5:00da22b8 r4:00da2268
[ 976.961486] Code: e1a0c001 e1a0e001 e2522040 a8a0500a (a8a0500a)
[ 976.967773] ---[ end trace 83bdb29850a1e142 ]--- |
|
57 | Core | Bug Report | High | New GLES driver not working yet (image from Feb 22nd) | Closed | |
Task Description
New GLES driver doesn't seem to load correctly right now.
Therefore, pmenu is also not working in this image. |
|
58 | Core | Bug Report | Critical | Pandora has not been shipped yet. | Closed | |
Task Description
Pandora has not been shipped yet. |
|
59 | Core | To Do (Reminder) | Low | ToDo: Add joystick / keyboard switch to pnd_run and lib ... | Closed | |
Task Description
The next kernel offers switching between a joystick / keyboard mode.
In joystick mode, the DPAD and ABXYRL Buttons behave like a joystick buttons and have no keyboard mappings.
In keyboard mode, the DPAD and ABXYRL Buttons have keyboard mappings and are NOT registered as joystick.
The normal keyboard keys are not affected by this.
PXML needs to have a switch added for that and pnd_run should change the mode according to that switch.
When the PND app has quit, it should always go back to keyboard mode.
The commands are the following:
echo 1 > /proc/pandora/game_button_mode # keyboard mode
echo 2 > /proc/pandora/game_button_mode # gamepad mode |
|
60 | Core | To Do (Reminder) | Low | Include new menufile (Setting) for XFCE4 | Closed | |
Task Description
I just built a nice menu file which features subdirectories for games and emulators :)
I attached it, the old one should be replaced:
/etc/xdg/menus/xfce-applications.menu |
|
61 | Core | Feature Request | Medium | Packages to remove and include | Closed | |
Task Description
The following packages can be removed:
embryo
gnome-games
gnome-games-blackjack
gnome-games-gnometris
gnome-games-iagno
gnome-games-gtali
gnome-games-gnobots2
xmms-mad
But we need the following ones:
xmms-plugin-input-mpg123
xmms-plugin-input-mikmod
mikmod
libxxf86dga1
epdfview
gnumeric (if possible, would be nice)
I do wonder though if we should remove all gnome-games (and ScummVM) completely.
Makes more sense if we wrap those games up as PND files.
Same goes for the community wallpapers. Should we include them? Or save that space for other things? |
|
62 | Core | To Do (Reminder) | Low | New xmodmap to include into latest image | Closed | |
Task Description
This is just the latest xmodmap, based on the latest map notaz released.
Both maps (xmodmap and notaz' console map) are attached.
Path in the image:
/etc/skel/.pndXmodmap
/etc/keymap-extension-2.6.map |
|
63 | Core | To Do (Reminder) | Low | Include new panel-setup for XFCE4 | Closed | |
Task Description
I enhanced the XFCE4-Panel setup a bit, since we now have working ALSA mixer and a battery monitor.
The files inside the attached archive should go to
/etc/xdg/op/xfce4/panel/*
in the image. |
|
64 | Core | To Do (Reminder) | Low | New power-manager.xml-file (removes opening the logout ... | Closed | |
Task Description
As the powerswitch is used to go into low power mode or shutdown, it doesn't make sense showing the logout dialogue (which would appear when you come back from low-power mode).
Therefore, I disabled it with this file.
It should be placed in:
/etc/xdg/op/xfconf/xfce-perchannel-xml/
in the image. |
|
66 | Core | Bug Report | High | libpnd : pnd_pnd_mount() function bug | Closed | |
Task Description
libpnd : pnd_pnd_mount() function do not seems to wait the mount to success before returning, this can cause some application to try to access the pnd content before it really get mounted. |
|
67 | Core | Bug Report | Low | libpnd : pnd_apps_exec() function bug | Closed | |
Task Description
libpnd : pnd_apps_exec() do not seems to be up to date with pnd_run.sh script, when executing the function i get from the terminal :
getopt: invalid option -- 'c'
Terminating... |
|
68 | Core | Bug Report | Low | AlephOne PND not running | Closed | |
Task Description
I don't even know if this is a bug or if I just happen to have a fault in my PXML file.
All multi-apps-PNDs I have do run fine - except for AlephOne.
Whether I include the datafiles or keep them external, it won't work.
I can manually mount it (pnd_run.sh -p /bla.pnd -m ) and run it from the mounted directory, but it does not do so automatically from the desktop file.
If one of you two could check that out, that would rock.
You can download it from the usual PND-Repo I use ;) |
|
69 | Core | Bug Report | High | libpnd : pnd_apps_exec() function bug | Closed | |
Task Description
PND_EXEC_OPTION_BLOCK do not seems to work anymore ( the function does not wait the pnd_run.sh task to finish anymore ) |
|
70 | Core | To Do (Reminder) | Low | Make switching GUIs more customizable (hardcoded at the ... | Closed | |
Task Description
At the moment, /usr/pandora/scripts/op_switchgui,sh ,/usr/pandora/scripts/op_defaultgui.sh and /usr/pandora/scripts/first-run-wizard.sh are hardcoded with the GUIs we have.
I'd like to have that configurable for the future.
My current plan is having a config file with all the GUIs in (e.g. /etc/pandora/gui.conf)
In there, there should be ALL GUIs:
"XFCE4";"startxfce4";"xfce4-session-logout --logout"
"Netbook Launcher";"startnetbooklauncher";"killall netbook-launcher-efl"
"PMenu";"pmenu";""
So with an info:
a) What's the name of the GUI
b) How to start it
c) How to stop it (if it doesn't do that itself)
Therefore, various GUIs could be implemented and switched with the Switch GUI script by simply adding it to the config file.
Ideally, all GUIs should either have a shutdown script (so I don't have to kill it to quit it) or react properly on a simple terminate
command :)
Or they could do it themselves, read out the config file, show up the different GUIs we have, change the /tmp/gui.load file and quit.
Any more ideas?
Any help? Coding that script shouldn't be too hard, the only thing I don't know at the moment is how to parse various config lines (as above) into a shell script :)
vimacs, any idea there? |
|
71 | Core | Bug Report | Low | Permissions of omapdss need to be fixed | Closed | |
Task Description
Only root can currently setup and change TV Out parameters :)
Should be set to make it user-changeable. |
|
72 | Core | Bug Report | Medium | Automatic Screen Saver crashes SGX Apps | Closed | |
Task Description
The automatic screen saver crashes apps which use the new SGX driver.
Has been tested with pmenu and Quake.
This does NOT happen with the Lid close / open turn off-routine, just with that automatic screen saver that turns of the LCD when you don't press a button for a while. |
|
74 | Core | Bug Report | Medium | xfce4-mouse-settings: Fix the check for Xi so it does n ... | Closed | |
Task Description
The xfce4-mouse-settings don't work on the Pandora, because they report "XI is not present or too old"
This is a known bug and there already is a fix for it:
http://www.mail-archive.com/xfce4-commits@xfce.org/msg09395.html |
|
76 | Core | Bug Report | High | Wifi connection lost under high CPU load | Closed | |
Task Description
I noticed that when I tried Quake 3 a while back that I would lose my internet connection. Only the very first time I tried it did it ever find a couple thousand servers and let me join a map. Since then, it always dies and I never see any servers.
I wasn't too concerned yet because maybe it's just Q3 doing something but tonight mplayer was running full screen and then suddenly it started chugging and the network manager popped up that it was trying to connect (spinning logo at the bottom). Since you only get one shot at network manager per boot, it was a lost cause.
The correlation I make here was that I'm sure the CPU was under heavy load for both cases but I haven't tried other programs to see what happens. I didn't have any games on this card tonight. Can anyone repeat this problem or is it a known issue? |
|
77 | Core | Bug Report | Low | Shut down screen | Closed | |
Task Description
The shut down screen says "booting...". :) |
|
78 | Core | Bug Report | Very Low | minimenu - zaxxon initial release - doesn't use preview ... | Closed | |
Task Description
Stupid; in the /etc/pandora/conf/mmenu.conf the preview cache is looked for in mmcblk[12]* .. should be [01] or really just /media/*/pandora... etc.
So just switch [12] to [01] and works fine.
Fixed in the git tree already, so will roll out in a real image build. |
|
85 | Core | Feature Request | Low | open lid while in low power mode | Closed | |
Task Description
I'm replying in-forum:
An interesting point -- opening the lid turning the screen on, but you're still in lower power mode. The question then becomes --
Since you enabled low power mode (using the power switch), thats the logical way to un-low power mode.
Two outcomes come to mind ..
When opening the lid, one of:
i) wake up from low power mode, or
ii) Don't turn the screen on when in low power mode
(or a variation of (ii) -- flash a warning "hey, I'm in lower power, bugger off, and hit the power switch")
I can code something in; probably occured due to in my prototype, I broke the power switch, so I didn't use low power mode near the end ;) |
|
140 | Core | Bug Report | High | WiFi Starts off fast then slows down | Closed | |
Task Description
When downloading files using a browser or wget or when attempting to stream videos we see a fast initial burst which then slows down dramatically.
see following topics for more details and actual user stats.
http://www.gp32x.com/board/index.php?/topic/54340-post-your-speed-over-wifi/
http://www.gp32x.com/board/index.php?/topic/54921-you-tube-through-vlc/
http://www.gp32x.com/board/index.php?/topic/54831-minitube/
http://www.gp32x.com/board/index.php?/topic/54901-possible-wifi-issues/ |
|
175 | Core | To Do (Reminder) | Very Low | Test | Closed | |
Task Description
Test if the edit button in the bug tracker works now. //Edit: Blah |
|
317 | Core | Bug Report | Medium | After disabling USB-host current still flows into USB d ... | Closed | |
Task Description
On my Pandora, due to bad internal WiFi, I use an Edimax EW-7811Un USB WiFi adapter, which has a status-LED, flickering according to the network activity.
After disabling USB-host through the settings menu, the WiFi functionality is gone, but the device's LED is still on. So some current must still flow into the USB device.
The LED now has a permanent light, no flickering! This lack of "device intelligence" indicates that the device was indeed turned off, just current flowing directly to the LED circuit unaltered).
I can repeat the aforementioned steps many times, the behavior is the same.
As soon as I then first physically unplug and reinsert the device, the LED remains off eventually.
From then on, every further issuing of "Disable USB-host" through the settings menu turns the device LED completely off.
Smells like a kernel bug to me! As it requires one real un/re-plugging, from then on works ok. |
|
84 | Application | Bug Report | Low | Bluetooth stays on | Closed | |
Task Description
You can enable Bluetooth, but can't disable it afterwards from the system -> toggle bluetooth menu shortcut. |
|
98 | Application | Bug Report | Medium | Pidgin freezes (msn) | Closed | |
Task Description
Pidgin freezes when using the msn protocol. Sometimes it can last 25 minutes before doing so, sometimes it freezes instantly. Usually it's after only a few minutes. Once it freezes you are still able to close it using the built in crash manager (?!)
This happens both when running from XFCE and Minimenu. |
|
114 | Application | Bug Report | Low | Chromium browser does not support HTTPS/SSL | Closed | |
Task Description
The Angstrom version of Chrome/Chromium web browser fails to open https links. This is a bug which has been fixed upstream, but not in the version packaged for Pandora. |
|
126 | Application | Bug Report | Very Low | CPU Speed Typo? | Closed | |
Task Description
If you set the CPU speed to 600 it warns that it is greater than 600. I thought 600 was the guaranteed speed? |
|
127 | Application | Bug Report | High | Firefox hangs when selecting the menu bar | Closed | |
Task Description
Just try to do something by accessing the menu, either thru keyboard or ts and it hangs. Maybe a problem with bookmarks ? |
|
153 | Application | Feature Request | Low | [PATCH] HACK: change OPP level according to set Mhz | Closed | |
Task Description
It's a hack, use on your own risk as always. I feel like abusing the tracker dropping all my patches here, but whatever. Patch attached. |
|
181 | Application | Bug Report | Low | Triple click in Thunar crash | Closed | |
Task Description
Triple tapping (with the stylus) a directory in Thunar in icon or compact mode (not detail view) causes Thunar to close (crash)
This is consistently repeatable: tapping three times in rapid succession on the same spot of the file causes the crash. It must be the exact same spot, as if double clicking, but a third tap is added. This can be triggered especially when a user becomes frustrated at mistapping, gets carried away, and taps too much. |
|
186 | Application | Bug Report | Medium | unusable "Manage LCD Gamma" tool | Closed | |
Task Description
Pandora Menu -> Settings -> LCD-Settings -> Manage LCD Gamma
Removing all the profiles listed there will make the user unable to even create a new one. The tool becomes unusable. I hope a re-flash would fix the problem.
The last profile in the list, or the Default one, shouldn't be deletable at all. |
|
198 | Application | Bug Report | Low | Mousepad: 'Find' works only once | Closed | |
Task Description
Mousepad 0.2.16
Find (Ctrl+F) works once, the next time it is used the button 'Find' is and stays grayed out. |
|
213 | Application | Bug Report | Low | Gigolo does not perform it's task | Closed | |
Task Description
In it's current state, Gigolo is flat out broken and (almost) useless. It pretends to to it's job, but can't because it's missing critical pieces of anatomy.
It can mount local filesystems correctly, but then so can thunar, so this is a redundant and useless function. The main reason to use Gigolo is to mount remote filesystems easily, and without having to use the terminal, and to save passwords in your keychain.
The solution to the problem is to perform the following tasks:
sudo opkg install gvfsd-sftp sshfs-fuse
sudo mousepad /etc/modutils/fuse
type "fuse" save and quit
sudo update-modules |
|
241 | Application | Feature Request | Low | MiniMenu shall remember state for next start | Closed | |
Task Description
With the setting "Live (not exit) on app run?" set to "NO" the currently selected tab and item shall be remembered, so that you return to the same state, in which you left MiniMenu. |
|
249 | Application | Bug Report | High | File Browser Thunar - After 2 nub double-clicks unreact ... | Closed | |
Task Description
If I navigate via keyboard (KEY UP/DOWN to move in lists, ENTER level down, BACKSPACE level up) I experience no problems at all. I can go many levels up/down, change to other folders, etc. No problems.
But if I navigate with the nubs, and using the right-nub-up-direction to trigger a double click, this only works 1-2 times, and from then on, the files/folders in Thunar cannot be clicked any further. I am stuck then.
A look into dmesg reveals this:
keyboard.c Can't emulate rawcode for keycode 139
The timestamp of that specific keyboard.c error messages exactly correlates with the bug occurrence times. (uptime timestamps matched with dmesg timestamps)
I tried alternative filebrowsers such as emelFM2, and there the problem does not exist, meaning I can trigger as many double clicks I want!
I am using HotFix 5 Alpha 4 on an SD card. The bug already annoyed me on a HF5 on the NAND. |
|
263 | Application | Bug Report | Critical | MiniMenu with "Auto discover pnd apps?" set to NO hangs ... | Closed | |
Task Description
BUG DESCRIPTION:
On my SD card with Pandora OS 1.6.4 I changed MiniMenu's setting "Auto discover pnd apps?" to NO, and then the program remained in an endless loop showing "Setting up menu...", crashing, "Setting up menu...", crashing, and so on.
BUG REPRODUCTION:
The variable filesystem.do_pnd_disco set to the value 0 definetely causes the crash, but maybe only in conjunction with some of my other settings?!
Therefore see my attached config file mmpref.conf.
Maybe related to FS#79 , hard to tell, as this is a very minimal report.
Definitely not related to my previously reported MiniMenu bug FS#262
WORKAROUND:
1) If your default GUI is:
a) MiniMenu: Then after rebooting, MiniMenu will still be caught in an endless loop! Therefore boot up from an auxilary/temporary volume rather than your volume with the damaged MiniMenu! If your ruined system is on the NAND boot from an SD card, if the ruined system is on SD card, boot from NAND or another SD card. In doubt read: http://pandorawiki.org/Running_Linux_from_an_SD_card
b) Other than MiniMenu such as XFCE: Then you are lucky. Simply start into XFCE, and continue with the next step.
2) Open ~/.mmpref.conf with a text editor and set the variable filesystem.do_pnd_disco to the value 1.
3) Reboot into your healed volume. |
|
266 | Application | Bug Report | Low | hf6rc: Unable to enter Low Power Mode with lid shut: | Closed | |
Task Description
Since hf6rc was installed I am unable to enter low power mode.
I did pull up the new lid config settings script and selected switch off screen.
Reproducable.
Nothing happens when the power switch is moved fully to the right for a short time.
I expect it to entry low power mode. quirky for it not too.
workaround: easy - enter LPM before closing lid.
btw: unable to select hf6 in reported version. |
|
289 | Application | Bug Report | Medium | "sudo find /" produces assertion | Closed | |
Task Description
$ sudo find /
find: ftsfind.c:477: consider_visiting: Assertion `ent->fts_info == 11 || state.type != 0' failed.
Aborted
This is fixed by updating findutils to latest version using
sudo opkg upgrade findutils
Release SuperZaxxon 1.5
(not Beta 3, as given in "Reported Version" field, but there the release cannot be chosen). |
|
298 | Application | Bug Report | Low | Mousepad only searches once | Closed | |
Task Description
Whenever I search text in an open Mouspad document, it works fine the first time. As soon as I close the search dialogue and re-open it, the "find" (resp "find and replace" in replace dialogue) button is greyed out and unclickable. (This is the state the dialogue is in before typing anything, but this time, typing doesn't help.) "return" also doesn't work. Only help is closing and reopening Mousepad. |
|
83 | Base OS | Bug Report | Low | getting more /media/mmcblk?p1 | Closed | |
Task Description
From a conversation with skeezix:
I'm seeing /media/mmcblk0p1, mmcblk1p1, mmcblk2p1, mmcblk3p1 and mmcblk4p1 - is that something I should worry about? This started after I inserted & ejected my sd card a couple of times.
To which skeezix said:
The system starts at /media/mmcblk0 (with p1 ec being the partition number); if you eject the SD, then stick it back in, it will try to go to the earlier number again, but if some process was watching that SD when you ejected it, the system will nto be able to recycle that number, so you get the next blk number. So if you end up with /media/mmcblk5p1 (say), then it means you've been eject/inserting, and some program or another has been watching the SD instead of letting it go.
Isn't it nicer to cleanup the ones above 1 (so 0 and 1 are there) at startup to avoid confusion? |
|
86 | Base OS | Feature Request | Very Low | Including small development frameworks/projects in the ... | Closed | |
Task Description
It could be nice, if some very small development frameworks were included in the OS since the Pandora should make it as easy as possible for beginners to start programming.
That means: A "Start coding now"-wizard/script can be run from the desktop from which you select the type of project (c++, python, SDL...) you want to do. It copies the framework to SD-Card, opens it in an editor/IDE to see the sourcecode and leads you to the first compile and run. Can be combined with a PND-Packer-script.
Ideas for frameworks:
- a small python template (pygame?)
- a template project for an SDL-project (red square in fullscreen)
- a template project for OpenGL ES (a simple colored triangle)
- a template project for using NEON or DSP
- something with a GUI (QT?)
- general HelloWorlds
- all as simple as possible!
I know that this could help many beginners to actually start programming because the first compile is often hardest step (setting up toolchain, hassle with libs, includes, dependencies, compiler options, choice of editor, makefiles, all that stuff).
Feel free to delete this feature request if it doesn't fit into the bugtracker. |
|
88 | Base OS | Feature Request | Low | pydoc is missing | Closed | |
Task Description
I love to use the pandora for some on-the-go python development, and I think I'm not the only one, but unfortunately the module pydoc is missing, which is needed for doing help(sys) on the interactive prompt. Could you please include that in the next firmware revision? Thanks! |
|
89 | Base OS | Bug Report | Medium | XFCE not loading up defaults when MiniMenu is selected ... | Closed | |
Task Description
When mini menu is set to the default menuing system, XFCE settings (selected theme, pandora-specific key bindings) do not get loaded by default, they need to be forced by opening a terminal and typing xfwm4 --replace |
|
91 | Base OS | Bug Report | Medium | libaudiofile is installed by codec pack instead of in b ... | Closed | |
Task Description
Certain emulators such as Fuse are reliant on this file and I am assured it should be part of the default load-out (or rather in the HotFix) rather than in the codec pack as it's not a copyright issue. |
|
92 | Base OS | Bug Report | Medium | Startupmanager | Closed | |
Task Description
When trying to toggle
Enable/Disable Autologin
After initially enabling this feature, attempt was made to disable unsuccessfully.
System says that it saves this info, upon reboot, login screen shows up again.
Wifi toggle seems to work, as does Default GUI, & selecting default user |
|
93 | Base OS | Bug Report | Low | zaxxon first boot: don't ask for user prompt if already ... | Closed | |
Task Description
How to reproduce:
First boot, Pandora's Box has been opened. Prompt for Full name, username, and password.
Then, simply press OK without selecting whether minimenu or xfce. None selected. Then you can't do any more. Wizard closes and you don't need any more options.
After manual reboot, the wizard starts again and asks for name again. But the username already exists. |
