|
229 | Core | Bug Report | High | Enable wake on alarm interrupts | Unconfirmed | |
Task Description
Found I'd kept some notes about making the Pandora's wake on alarm function work...
drivers/rtc/rtc-twl4030.c
twl4030_rtc_remove (for when the driver is removed) and twl4030_rtc_
shutdown (for when the system is shutdown) functions need to change. Or at least the shut down does.
oh YUK who's been using goto....
changes in drivers/rtc/rtc-twl4030.c
twl4030_rtc_remove
commented out //mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
twl4030_rtc_shutdown
replaced
// mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
// BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
with
mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
twl4030_rtc_suspend
replaced
// mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
// BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
with
mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
twl4030_rtc_init
added (before return!)
twl4030_rtc_alarm_irq_set_state(true);
Should probably check reg 0x2B with mask 0x08 to see if alarm should be left enabled or not ?
but only in twl4030_rtc_shutdown and ?remove? NOT in twl4030_rtc_init
should remove ever happen ???
I'm guessing it's best to not enable the alarm irq's all the time??? |
|
227 | Core | Bug Report | Low | Delete button won't delete, and function lock doesn't w... | Unconfirmed | |
Task Description
If you hit the function button, then hit it again to lock the function keys, it doesn't lock the function key.
The delete key, hold shift and hit the back space button, it won't delete, meaning it won't remove the character to the right of the cursor. I saw this on the forum, and confirmed it on my pandora also. |
|
225 | Core | Bug Report | Medium | ads7846 reports odd pressure values | Unconfirmed | |
Task Description
using evdev xorg drivers and not the tslib drivers you can receive pressure axis data however there is
a problem with the values reported by the ads7846 module and the evdev driver has no calibration property for pressure
using
xinput test touchscreen
you can see the pressure axis ranging from 120-ish for hard press to about 150-170 for light press (low pressure values can
be quite erratic)
I could possibly hack the evdev module to possibly do something with this odd and narrow range of values, but I rather think looking
at the source that the ads7846 module needs some work.
is there a git tag that has a known working configuration? as I've had problems getting the kernel to compile the last few times I attempted... |
|
223 | Core | Bug Report | High | op_power.sh kills gles context | Unconfirmed | |
Task Description
opengles and op_power.sh don't like each other very much.
whenever returning from low power to full power mode again, opengles rendering is just dead.
the reason for this issue are following 2 lines within op_power.sh
18 echo 0 > /sys/devices/platform/omapfb/graphics/fb0/blank
...
66 echo 1 > /sys/devices/platform/omapfb/graphics/fb0/blank
if these lines are removed/commented, the gles rendering just resumes fine. |
|
222 | Application | Bug Report | Low | Login Screen does not accept all symbols of the form Fn... | Unconfirmed | |
Task Description
Problem - Login Screen does not accept all symbols of the form Fn+char
Reproducibility - always
Actual results - the characters :?#|$€"‘£¥@!_ do not work on the Login Screen with the Pandora's keyboard. When fn then the corresponding character is pressed, nothing is added to the string.
Expected results - these characters should appear just like any other character
Work Around - an external keyboard was able to enter these characters
Aditional Information - While the characters :?#|$€"‘£¥@!_ do not work, the characters ;/\'-+=`() work just fine. |
|
217 | Application | Feature Request | Low | Add Mounting and unmounting context options for PND's | Unconfirmed | |
Task Description
It'll have to be in the SKEL.
/etc/skel/Applications/Settings/Thunar/uca.xml
People can replace the contents of their current uca.xml file with the following to gain this functionality now.
/home/[USERNAME]/Applications/Settings/Thunar/uca.xml
Terminal
Open Terminal Here
exo-open --working-directory %f --launch TerminalEmulator
Example for a custom action
*
emblem-symbolic-link
Mount PND
/usr/pandora/scripts/pnd_run.sh -p %f -m && thunar /mnt/utmp/
*.pnd;*.PND
gtk-jump-to-rtl
Unmount PND
/usr/pandora/scripts/pnd_run.sh -p %f -u
*.pnd;*.PND |
|
210 | Core | Feature Request | Medium | Wader - cross platform graphical assistant for 3g conne... | Unconfirmed | |
Task Description
http://www.wader-project.org
http://trac.wader-project.org
http://trac.wader-project.org/wiki/Developers
this would be really usefull to monitor reception/network of mobile broadband dongle and it also counts ur mobile data usage (for those that have limits). |
|
209 | Core | Feature Request | Medium | Shutdown after a full charge | Unconfirmed | |
Task Description
That still need to be configurable, but chris_c does a good job I'ld like to see integraded in the main image :
http://www.gp32x.com/board/index.php?/topic/58794-a-script-to-shutdown-after-charging/
and :
http://chrisc.bedroomcoders.co.uk/?p=77 |
|
204 | Core | Bug Report | Medium | fonts issues | Unconfirmed | |
Task Description
Ok, I just want to say that there is something missing about the font on the base image. I cant get what (at least for now)
Here is an issue : http://www.gp32x.com/board/index.php?/topic/54282-getting-vnc-viewer-to-work/
With my current Ogre build I get :
Warning: Unable to load any usable ISO8859 font
Error: Aborting: no font found
I've googled but so far no solution :( |
|
190 | Core | Bug Report | Medium | Removing desktop-shortkeys does not work | Unconfirmed | |
Task Description
Try clearing shortcuts in Start->Settings->Window Manager->Keyboard. That doesn't work (for me).
This is a problem because these shortcuts are blocking key-combination in apps, like for example the keymapper in dosbox (CTRL+F1) or refreshing content (CTRL+F5). I tried manual editing or even deleting the configuration file, but changes are not recognized and the file recreated on reboot. |
|
185 | Core | Bug Report | Low | Xorg driver should not be dependant on user environment | Unconfirmed | |
Task Description
The patch implementing screen blanking uses the /usr/pandora/scripts/op_lid.sh script to control LCD backlit:
http://git.openpandora.org/cgi-bin/gitweb.cgi?p=openembedded.git;a=blob;f=recipes/xorg-driver/xf86-video-omapfb/pandora_backlight_dim.patch;h=4a0b8432d083c6e7297192a2920c7a777ae3d098;hb=16f3fff44323bd6b4349d909667b51a2fef3f278
The same result can be achieved by using the sys interface:
/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/bl_power
This approach makes driver independent on particular distribution. The proposed patch is attached. |
|
179 | Core | Bug Report | Low | .vimrc-preset for user but not for root | Unconfirmed | |
Task Description
I am running PandoraOS from sd-card installed with the official tarball "pandora-rootfs.tar.bz2".
I noticed that the control/keyboard-mapping in vi does not work correctly after switching to root (for example sudo su-). I solved this by copying over my users .vimrc to root-homedir. This should already be included in the tarball. |
|
178 | Core | Bug Report | Low | Mount-loop when booting from SD-card | Unconfirmed | |
Task Description
When booting the pandora-OS from sd-card by using the official tar, you will end up with your sd-card being mounted twice: once as / and once as /media/. I solved this by adding "/dev/mmcblk0" to "/etc/udev/mount.blacklist". Maybe this should be added to the default tarball? I'm not sure as it might be used in other ways maybe (beside SD-card-installation)?
Background: I ran "updatedb" as root and have been notified by a message that there was a mount-loop. After adding the above modification the system still booted fine and "updatedb" ran nicely without a warning. |
|
159 | Base OS | Bug Report | Medium | System > Run PND Application menu item does nothing | Unconfirmed | |
Task Description
With both Hotfix 3 and Hotfix 4 Beta the Run PND Application menu item fails to do anything.
Possibly related problem is that PND files newly copied to SD card are not recognized and entered on desktop as expected.
When you go to Thunar and right click - execute the PND file, nothing happens.
Possible fix by copying the PND to another folder on the SD card with Thunar.
This makes at least two PND files I had work.
Still no response with "Run PND Application" menu, though. |
|
158 | Base OS | Bug Report | Medium | Refresh rate and BPP | Unconfirmed | |
Task Description
On OS Zaxon (hotfix 3).
With "xfconf-query", the resolution is 800x480@60 Hz.
But with the tool in the menu "Settings" -> "Display", the resolution is 800x480@0 Hz.
With Java (opensdk-6-jre 6b18-1.8),
GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayModes()
return 1 display mode that is 800x480@0 Hz with a BPP of -1.
It seems to be the reason that GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayMode() return null
and when closing a java application that goes in fullscreen mode to throw an exception (invalid display mode). |
|
156 | Base OS | Feature Request | Very Low | Ask to format SD Card | Unconfirmed | |
Task Description
When I have received my Pandora, I got an SD Card but it was not formated. I didn't have any card reader so I didn't now what was wrong (the Pandora or the SD Card).
When an unformated SD Card is inserted in the Pandora, it should be nice to ask if we want to format it. |
|
155 | Core | Bug Report | Medium | Critical problems after rescaling GLES2 X windows | Unconfirmed | |
Task Description
When a X window which is displaying GLES2 render output is:
- Either dragged out of the visibile screen region (?)
- Is made larger than it was at the creation time of the GLES2 context
then:
- The performance will drop significantly as the EGL buffer swaps won't occur as fast as before,
- The render output will be corrupted and flicker
- In rare occasions crashes the application or locks up the entire system (which forces you to remove the battery)
The problem can not be solved without restarting the application (Possibly forcing players to complete the same goals again as they were unable to reach a savepoint or similar things).
This was confirmed in Mupen64Plus and the PowerVR GLES Samples and some of my own projects (which are, however, based on the PowerVR samples).
As I didn't see any other reports about this problems (but had it confirmed by other Pandora users too) I would expect that it can be fixed by using a newer X, kernel or combination of them as other OMAP users would be effected too. |
|
148 | Core | Bug Report | Low | add standard library path to ldconfig.so.conf to help l... | Unconfirmed | |
Task Description
cat >/etc/ld.so.conf |
|
135 | Application | Bug Report | Low | OOM Killer causes loss of items in xfce4-panel configur... | Unconfirmed | |
Task Description
When the Pandora runs out of memory and the Out-Of-Memory killer fires, the Applications/Settings/xfce4/panel/panels.xml loses the entries for the menu button and the power monitor. |
|
124 | Base OS | Bug Report | Low | ifup doesn't like dhclient | Unconfirmed | |
Task Description
I added:
iface usb0 inet dhcp
And ran:
ifup usb0
But dhclient simply prints usage. |
|
118 | Base OS | Feature Request | Low | add sdl-perl to the base OS | Unconfirmed | |
Task Description
Hi there,
Many games depend on sdl-perl. Perl and sdl are part of the base OS, but not not the connection between the two.
Cheers,
sebt3 |
|
110 | Core | Bug Report | Very Low | Battery percentage static in MiniMenu | Unconfirmed | |
Task Description
Battery remaining percentage in MiniMenu does not update unless you change tabs back and forth.
This is only really an issue when leaving the unit charging and not using it. It gives the appearance that it is not charging until you swap tabs around. |
|
106 | Application | Feature Request | Very Low | AppData corruption | Unconfirmed | |
Task Description
The appdata folder was corrupted on my SD card from an unclean eject this made the folder read only until i ran a repaired it. MiniMenu still displayed all my PND files.
When clicking to launch the app would try to load crash and then return to MiniMenu without any visible error. This was pretty confusing and i thought it might be a good fix for a troubleshooting guide. |
|
104 | Base OS | Bug Report | Low | AAC decoder libfaad doesn't appear to be compiled as fi... | Unconfirmed | |
Task Description
FAAD2 appears to not be compiled with fixed point decoding. My version of libfaad compiled with fixed point used 2-3x less cpu than the provided one. It's not enough to provide the switch to the configure script. the file libfaad/common.h has to be edited and a define uncommented. Line 68 in the v2.7 source.
/* COMPILE TIME DEFINITIONS */
/* use double precision */
/* #define USE_DOUBLE_PRECISION */
/* use fixed point reals */
//#define FIXED_POINT |
|
201 | Core | Bug Report | High | PND apps still use memory after they've quit | Closed | |
Task Description
After running and quitting a PND app, not all of the used memory is being freed.
This eats more and more memory over time. Just run 5 or 6 apps and you only have half of the memory left.
Sounds like either aufs or unionfs don't free the memory after unmounting.
This has been reported with HF4 and still is the case with HF5 Beta 2
-- downgraded to 'Researching' and 'Normal' priority until confirmed and details found |
|
82 | Base OS | Bug Report | Critical | Network Manager - Wifi Can't Reconnect | Closed | |
Task Description
When wifi drops out, or you have disconnected from it and wish to reconnect, you cant reconnect using network-manager.
The connecting icon spins for a while, then it pops up the 'Password' Dialog. If you enter your password, the cycle begins again. |
|
322 | Core | Bug Report | Low | Allow removal of categories using the libpnd category c ... | Closed | |
Task Description
Since some PNDs provide nonstandard categories like GTK or GNOME, it is desirable to extend the libpnd category mapping with the ability to suppress individual categories completely. |
|
321 | Core | Feature Request | Low | Support overriding all category fields with .ovr | Closed | |
Task Description
Currently only the main category and the first sub category of the main category can be overridden using a .ovr file while libpnd uses additional PXML supplied category date to construct the desktop file. This makes it difficult to work with PNDs that supply unwanted data in these additional fields. |
|
279 | Core | Feature Request | Medium | pidgin requires (more) locales to work correctly | Closed | |
Task Description
Please add the following package to allow umlauts working in pidgin:
glibc-gconv-utf-16
After installing this package I no longer have a problem receiving umlauts in pidgin. Besides it might also make sense to add "glibc-gconv-cp1250" which might be required for western europe and koi8-r which seems to be missing for xchat and conversion of chars there.
At the moment the following locale related packages are installed (as of SuperZaxxon Beta3):
glibc-charmap-utf-8 - 2.9-r35.3.5
glibc-gconv - 2.9-r35.3.5
glibc-gconv-cp1252 - 2.9-r35.3.5
glibc-gconv-ibm850 - 2.9-r35.3.5
glibc-gconv-iso8859-1 - 2.9-r35.3.5
glibc-gconv-iso8859-15 - 2.9-r35.3.5
Please add:
glibc-gconv-cp1250
glibc-gconv-koi8-r
glibc-gconv-unicode
glibc-gconv-utf-16
Thanks! |
|
237 | Core | Bug Report | Critical | /dev/mmcblkN - N sometimes points to left, sometimes to ... | Closed | |
Task Description
SPECIFICATION:
According to http://pandorawiki.org/SD_compatibility_list
/dev/mmcblk0 is the left SD card slot (the one being closer to the headphone check)
/dev/mmcblk1 is the right SD card slot
I trusted that device path specification.
And it was correct MOST of the time.
But sadly only most of the time, NOT ALWAYS!!!
This bug is severely dangerous, as a (possibly critical) command could unexpectedly affect a device other than the one you intended it for!
BUG INCIDENT:
Sadly, I realized this bug at the worst possible moment!
I issued the command: shred -fvz /dev/mmcblk0
but it erased the card in the RIGHT slot.
I realized that because the card inserted on the left has 16GB, and the one on the right 128MB.
I checked both the card positions and my entered command, to exclude my own mistake. Sadly it was not a clumsy mistake: This severe bug really exists!
BUG REPRODUCIBILITY:
I already slightly witnessed this bug during the last days, but thought it was just a coincidence.
I.e. in GParted the larger card showed up at the wrong device path.
I did a refresh and/or ejected/re-inserted the card, and the expected device path was back again, and I did not think further about this incident.
Only today with this fatal shred incident, I eventually realized this behavior is a bug.
Luckily I had my data backed up. |
|
234 | Core | Feature Request | Medium | Changeable behaviour when closing the lid | Closed | |
Task Description
As it was requested on forum.gp2x.de and I think it's a good idea I've written some scripts to allow the user to change what happens when the lid is opened/closed.
There are 3 Settings:
-The old behaviour (turning off the screen)
-Go into low power mode
-Shutdown
Default behaviour is still the same: Turn the screen off. Maybe we could change this to low power mode? I don't know.
I made a lot of changes to op_lid.sh: http://pastebin.com/GT3qxWSx (diff: http://pastebin.com/Z8GwpDj8 )
I changed line 11 in op_power.sh to: if [ $powerstate -ne 0 ]; then
And wrote a gui for changing the setting using zenity: http://pastebin.com/9JvSTqfQ
(I still can't upload any files, don't know if it's the fault of my browser, that's why I use this paste service) |
|
219 | Core | Bug Report | Medium | wrong owner of /home/user/Desktop | Closed | |
Task Description
I just reflashed with HF5, and it turns out that I cannot make shortcuts on the desktop. It is very simple to fix:
sudo chown janek.janek Desktop/
I remember that this bug was also present in HF4, I fixed it so quickly that I didn't even remember to report it. |
|
176 | Core | Bug Report | Medium | op_power.sh: problematic display brightness restoring a ... | Closed | |
Task Description
Since hotfix4 it is possible to reduce the value for display brightness below '3'. Thus the script op_power.sh (the one used for low power mode) has to be adjusted accordingly. Currently line 25 in this script looks like this:
if [ $oldbright -ge 3 ] && [ $oldbright -le $maxbright ]; then
Please change the "-ge 3" part to "-ge 1" so that lower modes are possible, too. Otherwise the screen will be set to max brightness if you have selected a value of '1' when going into powersave mode.
Somehow it looks like what is possible to select via the hotkeys and what is possible via the "application" differs. In the script op_lcdsettings.sh in line 11 a minimum brightness of 3 seems to be defined, with the hotkeys it is even possible to go down to 0 (screen off) or values like 1 and 2. This is the relevant line:
minbright=3
Brightness restoring appears to be problematic in op_lid.sh, too. Just have a look at line 25 in this script:
if [ $oldbright -ge 3 ] && [ $oldbright -le $maxbright ]; then
Another issue is that the clockrate of 14MHz is simply too low to be reasonable. Please do adjust it to 125MHz instead, since this seems to be what TI recommends and what makes most sense since starting with hotfix4 this is where the lowest powermode (OPP0) is entered. When clocking down to 14MHz issues like the clock not working correctly come up.
Relevant lines in op_power.sh:
line 14, restoring old clockrate:
if [ $oldspeed -gt 14 ] && [ $oldspeed -le 900 ]; then
line 72, setting the clockrate for low power mode:
echo 14 > /proc/pandora/cpu_mhz_max |
|
171 | Core | Feature Request | Medium | Update clock from hardware when restoring from low powe ... | Closed | |
Task Description
The clock occasionally does weird things during low power mode, sometimes gaining time, sometimes losing. This is most likely a result of the CPU being reduced to 14Mhz and the system clock being unable to keep up.
A convenient work around is to make a call to "/sbin/hwclock --hctosys" during wake-up to load the hardware clock back into the system clock. This may add an extra second or two to the wake-up time but will prevent confusion caused by clock being very incorrect. |
|
170 | Core | Bug Report | Medium | Executable directories broken | Closed | |
Task Description
Directory type packages fail to run. i.e. dropping a directory containing PXML.xml and a bunch of files onto the SD card rather than a .pnd package.
The application is detected and menu entries created correctly, however pnd_run.sh fails to bind mount the directory due to bogus double quoting. Looks like a failed attempt to handle spaces in the path. Patch below removes these incorrect quotes.
--- pnd_run.sh
+++ pnd_run.sh.old
@@ -161,2 +161,2 @@
elif [ $DFS = directory ]; then
- mntline="sudo mount --bind -o ro ${PND} "
+ mntline="sudo mount --bind -o ro \"${PND}\" " |
|
128 | Core | Bug Report | Medium | pndnotifyd Segfault | Closed | |
Task Description
pndnotifyd Segfault when the PXML.xml attached with th pnd contain non-ascii characters (for translation) |
|
119 | Base OS | Feature Request | Low | ext4 support | Closed | |
Task Description
Don't know how much work this would be to get a later version of the linux firmware to add this, but it would be nice to have more filesystem support. |
|
117 | Application | Bug Report | Low | Quake1 / Nanogl Lockup | Closed | |
Task Description
After the last TI gles driver update quake1 (vanilla glquake 1 sources) and nanogl started to lockup the pandora after a few minutes of gameplay. Oddly all the other apps using nanogl seem stable.
There is some bad code in nanogl (missing/null function pointers), which I need to clean up and afterwards reevaluate this issue. |
|
115 | Base OS | Bug Report | Medium | OS is missing libvorbisidec.so | Closed | |
Task Description
Please add to next hotfix, srb2 needed this file. My temporary hack was to modify the LD_LIBRARY_PATH (didnt like having to so this, but I think the way srb2 is loading the library it wouldnt work without it) and include the library in the pnd.
Once this lib is added ill do an update on srb2 and remove the LD hack. |
|
112 | Core | Bug Report | Medium | .pnd files with spaces in filename won't work | Closed | |
Task Description
pnd_run.sh barfs when given a file with space in it's name.
Also pnd_run bin doesnt enclose the .pnd name, it should.
/usr/pandora/scripts/pnd_run.sh -p "PicoDrive_180beta2 .pnd" -e PicoDrive.run
pnd set to `PicoDrive_180beta2 .pnd'
exec set to `PicoDrive.run'
/usr/pandora/scripts/pnd_run.sh: line 50: [: PicoDrive_180beta2: unary operator expected
when run from menu:
in fork!
df: /media/mmcblk1p1/pandora/desktop//PicoDrive_180beta2: can't find mount point
mountpoint:
/usr/pandora/scripts/pnd_run.sh: line 120: [: !: integer expression expected
not mounted on loop yet, doing so
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
error determining fs, output was cannot |
|
101 | Core | Bug Report | High | Cannot unmount SD card or USB stick through the GUI | Closed | |
Task Description
When I rightclick and select "unmount" I always get an error, see below.
unmounting from a terminal window works fine.
Also see:
http://www.gp32x.com/board/index.php?/topic/54353-unmount-sd-card-hdd/
"Unable to unmount .... Cannot open /media/.hal-mtab" |
|
90 | Base OS | Feature Request | Low | Adding more "general libs" to the OS image | Closed | |
Task Description
It would be nice if some more generic libs that could be used by software ported to the Pandora would be available in the base image. For example for Wesnoth we do require these additional libs (names taken from http://www.angstrom-distribution.org/repo/?pkgname=boost ):
* boost-iostreams
* boost-regex
* boost-serialization
Beside this Wesnoth does also require this package (from http://www.angstrom-distribution.org/repo/?pkgname=lua5.1 ):
* lua5.1
In general I would recommend pulling in all of boost. This means the dependencies as well as the recommends. Here is a short paste of what this means:
Depends:
libc6, libstdc++6, libgcc1, boost-filesystem, boost-thread, boost-date-time, boost-system
Recommends:
boost-date-time, boost-filesystem, boost-graph, boost-iostreams, boost-program-options, boost-python, boost-regex, boost-serialization, boost-signals, boost-system, boost-test, boost-thread
There are probably some other packages/lib that might make sense to directly have in the OS image, but they currently don't come to my mind, so I can't list them here. ;) |
|
87 | Core | Bug Report | Medium | default /etc/network/interfaces is causing problems | Closed | |
Task Description
The default /etc/network/interfaces has 192.168.1.0/24 subnet set up for usb0 which causes wifi connectivity to fail for users that have wifi on the same subnet.
All addresses should be edited out from /etc/network/interfaces, eth* stuff should probably be dropped too. |
|
48 | Core | To Do (Reminder) | Low | Create the TV Out Enable / Disable scripts | Closed | |
Task Description
The commands do exist, I just need to wrap them round some zenity scripts. |
|
16 | Core | Bug Report | Medium | normal user login fails over serial/ttys | Closed | |
Task Description
Only root can login over serial or ttys, and only if it has no password. Ssh login works fine.
After some debugging it seems to be PAM issue, possibly recipes/shadow/ misconfiguration in OE. Maybe we sould use IMAGE_LOGIN_MANAGER = "busybox" instead of IMAGE_LOGIN_MANAGER = "shadow" as we don't need super security? |
|
14 | Core | To Do (Reminder) | Low | Add hup of pndnotifyd to .xinitrc | Closed | |
Task Description
Pretty minor risk, but if the guy creates multiple accounts on the machine, and logs out of one and into another .. we'll want to hup pndnotifyd
Alternative solution is to poll utmp (or inotify on utmp?) to watch for logins and handle it magicly. |
|
10 | Core | Bug Report | High | Permissions / sudoers isse in 12-21 image | Closed | |
Task Description
pndnotifyd will create .desktop files
Running those will fail; if you've just done a recent sudo, they'll run fine
Probably sudoers file needs fix |
|
2 | Core | Bug Report | High | pndnotifyd | Closed | |
Task Description
pndnotifyd needs to be restarted before it works (tested in image 2009-12-21)
This can manually be fixed by installing two packages:
http://www.angstrom-distribution.org/unstable/feed/armv7a/base/sessreg_1.0.4-r0.2_armv7a.ipk
http://djwillis.openpandora.org/pandora/packages/pandora-libpnd_1.0-r12.5_armv7a.ipk
And adding to lines to slim.conf:
sessionstart_cmd /usr/bin/sessreg -a -l $DISPLAY %user
sessionstop_cmd /usr/bin/sessreg -d -l $DISPLAY %user |
|
317 | Core | Bug Report | Medium | After disabling USB-host current still flows into USB d ... | Closed | |
Task Description
On my Pandora, due to bad internal WiFi, I use an Edimax EW-7811Un USB WiFi adapter, which has a status-LED, flickering according to the network activity.
After disabling USB-host through the settings menu, the WiFi functionality is gone, but the device's LED is still on. So some current must still flow into the USB device.
The LED now has a permanent light, no flickering! This lack of "device intelligence" indicates that the device was indeed turned off, just current flowing directly to the LED circuit unaltered).
I can repeat the aforementioned steps many times, the behavior is the same.
As soon as I then first physically unplug and reinsert the device, the LED remains off eventually.
From then on, every further issuing of "Disable USB-host" through the settings menu turns the device LED completely off.
Smells like a kernel bug to me! As it requires one real un/re-plugging, from then on works ok. |
|
175 | Core | To Do (Reminder) | Very Low | Test | Closed | |
Task Description
Test if the edit button in the bug tracker works now. //Edit: Blah |
