|
323 | Core | Bug Report | Medium | OS Selector bug | Closed | |
Task Description
When selecting no OS in the OS Selector you're returned to the login screen where you have to reauthenicate. (Pressing Enter without selecting an OS does this)
I happen to do this a lot and it drives me mad :P |
|
102 | Base OS | Bug Report | Very Low | Pandora key does not close XFCE menu | Closed | |
Task Description
If the XFCE menu has been opened by a touchscreen command, it can also be closed by hitting the logo again. However, opening the menu this way and then hitting the Pandora key only spawns more instances of the menu. Least intrusive way to close those seems to be to select "Logout" and hit Cancel. |
|
81 | Core | Bug Report | High | pandora seems to hang during boot, turns out it didn't | Closed | |
Task Description
it seemed just now thay my pandora didnt complete its bootsequence. During booting, the screen turned black. I thought it had crashed, but I still saw lights flashing when I inserted an SDcard.
I then assumed that it WAS booting normally, but that the screen was turned down. So I pushed enter to confirm my username, as I suspected that I was at that prompt. Next I inputted my pwd, pushed enter, waited a bit, and then ised Fn+I to increase the brightness. It worked!
I think that during the bootprocess the screen should at most be set to the darkest setting, but never to off.
I think I know what happened. I told my pandora to shutdown and closed the lit before it was done. I guess that that swiittched off the screen, a setting which was then saved by the shutdown process, and restored during the bootsequence.
I would suggest fixing this in the startup process, rather than the shutdown process, because that way, no matter what ends up in the settings, a sensible valsue is set at startup. I'll see if I can reproduce this. |
|
314 | Core | Bug Report | Low | Pandora-Button doesn't open XFCE menu | Closed | |
Task Description
If you enable the "disapear automaticaly" feature in the XFCE panel, the Pandora button doesn't open the main menu anymore and you need to open it manually with the cursor. |
|
98 | Application | Bug Report | Medium | Pidgin freezes (msn) | Closed | |
Task Description
Pidgin freezes when using the msn protocol. Sometimes it can last 25 minutes before doing so, sometimes it freezes instantly. Usually it's after only a few minutes. Once it freezes you are still able to close it using the built in crash manager (?!)
This happens both when running from XFCE and Minimenu. |
|
169 | Core | Bug Report | Low | pidgin freezes all the time | Closed | |
Task Description
pidgin freezes all the time |
|
134 | Core | Bug Report | Low | please add a working phonon backend | Closed | |
Task Description
Please see : http://www.gp32x.com/board/index.php?/topic/54831-minitube/page__view__findpost__p__883993
:) |
|
220 | Core | Feature Request | Low | Please include /usr/bin/xkbset | Closed | |
Task Description
One of the first things after installing HF5 was downloading xkbset, because it is necessary for proper L-R buttons mapping as mouse buttons. Could you please include that in the system?
I am using urjaman's executable from here:
http://www.gp32x.com/board/index.php?/topic/55124-remapping-the-mouse-buttons-etc/page__st__15__p__896576&#entry896576
Even better would be a GUI that allows mapping of L-R buttons for mouse, just like GUI for nubs :) But including xkbset will be already good. |
|
189 | Core | Bug Report | Medium | pnd-run.sh does not work correctly for very long <pathn ... | Closed | |
Task Description
When unmounting, the pnd-run-script greps the output of "losetup -a" at some point. But if you have a very long pathname and filename for the pnd (like "/media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_EN.pnd" then the endpart is cut off in the output, grep can't find the right part and the script get's confused.
Example:
mounting works:
/usr/pandora/scripts/pnd_run.sh -p /media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_EN.pnd -b scummvm -m
unounting does not work:
/usr/pandora/scripts/pnd_run.sh -p /media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_EN.pnd -b scummvm -u
(see /tmp/pndrun*-logs for output)
The problem is that the outut of losetup looks like this in such a case:
"/dev/loop7: [b309]:157081 (/media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_*)"
And because the pnd-name is not fully shown, grepping the name does not work. After i renamed th pnd to a much shorter name (somi_amiga_en.pnd) it worked nicely. Still this should be fixed. |
|
150 | Core | Bug Report | Low | pndnotifyd Segfault | Closed | |
Task Description
Might be related to http://bugs.openpandora.org/index.php?do=details&task_id=128
as it have exactly the same behaviours.
But this time no translation is involved (masked in my script until this is fixed).
And making the file smaller (by removing apps :( ) managed to let it alive, so it seam to be file size related. |
|
247 | Core | Bug Report | Low | pnd_make.sh can't handle PND with spaces in the path | Closed | |
Task Description
pnd_make.sh can't handle PND with spaces in the path. For example, if the label of the volume where the PND is saved, has spacebars.
The Problem is line 655:
655: PND=$(readlink -f $PND)
Bash handles a path with spacebars as two seperate arguments for the readlink command.
The problem is, that i don't know a solution for this problem. |
|
303 | Core | Bug Report | Low | pppd 2.4.3 has a bug, recommend upgrade to ppp 2.4.5 | Closed | |
Task Description
pppd 2.4.3 doesnt auto reconnect (in my setup) even if configured to do so (persist). Found a ppp bug report confirming this ( http://ppp.samba.org/cgi-bin/ppp-bugs/resolved?id=1110;user=guest - "ppp-2.4.3 / pppoe not reconnecting") and that it has been fixed. I compiled pppd 2.4.5 and that reconnects just fine. |
|
88 | Base OS | Feature Request | Low | pydoc is missing | Closed | |
Task Description
I love to use the pandora for some on-the-go python development, and I think I'm not the only one, but unfortunately the module pydoc is missing, which is needed for doing help(sys) on the interactive prompt. Could you please include that in the next firmware revision? Thanks! |
|
194 | Core | Bug Report | Low | python ctypes broken (and fix) | Closed | |
Task Description
run python and type import ctypes
cant find _ctypes it says....
for further details and a fix see
http://www.gp32x.com/board/index.php?/topic/57102-python-ctypes-stopped-working/ |
|
168 | Core | Bug Report | Low | qt-embedded doesn't work | Closed | |
Task Description
qt-embedded doesn't work |
|
136 | Core | Bug Report | High | rather high battery discharge while Pandora is powered ... | Closed | |
Task Description
The Pandora does seem to use too much energy while it is turned off. A testcase: The pandora was turned off over night (about 8 hours) and battery state dropped from 98% to 96%. When removing the battery from the pandora for the same amount of time, the state is not changed at all.
This is based on the zaxxon firmware release with hotfix3, beta2.
Problem: if you don't use the pandora for a while and forget to remove the battery you can cause a deep discharge which might damage the battery. This is also a problem if the Pandora does eg shutdown itself since power is out and you can't directly attach it to a charger.
Possible causes:
* Design fault in the board.
* Too much powered on while the device *should* be completely powered off. The only things that should get power are the clock and the power button. This should basically not drain much.
Regarding the clock: The PalmPre is based on the OMAP3, too. There you basically have no discharge when it is powered off, so it is unlikely that the fault is in the OMAP3 itself. |
|
149 | Base OS | Bug Report | Very Low | Resets if Battery is removed - but power is still pluge ... | Closed | |
Task Description
The Pandora resets if the battery is removed - even though its plugged to the AC Adapter.
the power disapears for a second, and then the pandora notices that the power cable is actually plugged in, and immediately starts the pandora again |
|
147 | Base OS | Bug Report | Low | Screen backlight is ON when starting with lid closed | Closed | |
Task Description
[HotFix3 installed]
If you power up the Pandora and have the screen closed, the backlight will still go on. That should not happen. Right now you have to open it, close it and than the backlight turns off to save energy... |
|
230 | Core | Bug Report | Low | Second SD slot not working in future kernel version 2.6 ... | Closed | |
Task Description
Sorry, not sure where to log this bug. I have confirmed with aTc on freenode, that SD slot #2 does not work on kernel version 2.6.37 from the openpandora git.
Happy to test anything and reports results. |
|
107 | Base OS | Bug Report | Low | Secure Wifi will not connect until XFCE is loaded | Closed | |
Task Description
My Pandora is set to load MiniMenu on boot. I can't use any networked apps because wifi will not automatically connect on boot. XFCE needs to be loaded at least once so that i can enter my keychain password. Once i've entered my password Wifi connects and i can return to MiniMenu. |
|
202 | Core | Bug Report | Low | Set Date and Time won't let you cancel or close | Closed | |
Task Description
The Date and Time application in MiniMenu by won't let you use the cross or the cancel button to close the application without changing anything.
If you use one of those buttons then a new window opens that says: "Error: Please select a timezone" and equally so for the date and time. |
|
254 | Core | Bug Report | High | Several apps leave graphical artefact overlay (ghost) a ... | Closed | |
Task Description
After quitting some apps, their last graphical output remains on the screen, which covers a large area of the Pandora, and therefore makes it quite unusable, so that only a full restart resolves this issue.
As this happens in many apps (Mednafen-GB, Dark Light Battles, etc) this must be a problem within a shared library (driver, graphics lib, window manager framework, or similar). |
|
139 | Base OS | Bug Report | Low | Space should not be accepted in hostname | Closed | |
Task Description
http://www.gp32x.com/board/index.php?/topic/54878-embarassingly-nooby-questions-from-a-new-pandora-owner/page__view__findpost__p__885235
If the user names their Pandora using a space in the name, "This will prevent Xfce from operating correctly". Should trap this when asking for a host name. |
|
337 | Core | Bug Report | Low | SPAM | Closed | |
Task Description
SPAM |
|
312 | Core | Bug Report | Low | Special character in password | Closed | |
Task Description
problem:
setting a username and password using first setup wizzard it's possible to set special character like @#*%/ ect...
the login manager don't support this characters, so you need to reset the device.
possible solution:
1. disable the possibility of setting special characters.
2. implement special characters in login manager. |
|
195 | Core | Feature Request | High | Start re-recharge of battery sooner | Closed | |
Task Description
Increase battery LVL_4 and LVL_3 threshold.
After reaching 100%, in some cases the charge circuit enters "battery full" state, stops charging, and begins to discharge. This is not entirely unexpected behavior according to the spec sheet, although I don't fully understand exactly the situations in which it completes charging. Once the battery is full, the battery will begin discharging. The charge circuit automatically restarts the recharge once the voltage has gone below a certain level (crosses below the LVL_3 voltage threshold)
The default LVL_3 voltage threshold is 3.902 volts which is at about 80-85% battery level as recorded by bq27500 chip. In my opinion, this is way too low.
Setting the BCIMFTH2 register to 0xCB increases the voltage threshold to about 4.003 volts which is about 93%.
Setting it to 0xDC may also be worthwhile, which is just over 95%.
By default, if a user leaves their Pandora plugged in overnight, they may wake up to find their Pandora has stopped charging and the capacity has dropped to almost 80%, which can be quite startling to some users who will then report it as a bug.
This change will ensure that it never drops below 93-95%, a much more acceptable level.
Specific code changes suggested, in the /drivers/power/twl4030_bci_battery.c file, somewhere in the twl4030_bci_battery_probe function (or a function called by it), add the lines:
/********************************/
#define KEY_FTH2 0x7F
#define REG_BCIMFTH2 0x017
ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, KEY_FTH2, REG_BCIMFKEY);
if (ret)
return ret;
ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, 0xDC, REG_BCIMFTH2);
if (ret)
return ret;
/********************************/
(Move defines to the top, as appropriate) |
|
92 | Base OS | Bug Report | Medium | Startupmanager | Closed | |
Task Description
When trying to toggle
Enable/Disable Autologin
After initially enabling this feature, attempt was made to disable unsuccessfully.
System says that it saves this info, upon reboot, login screen shows up again.
Wifi toggle seems to work, as does Default GUI, & selecting default user |
|
277 | Core | Bug Report | Medium | SuperZaxxon B3: minimenu does not scan all folders | Closed | |
Task Description
Using SuperZaxxon beta3 (already observed it with beta2) it seems as if minimenu is not scanning all folders (and subfolders) correctly. Please have a look at this post for more information:
http://boards.openpandora.org/index.php?/topic/7558-superzaxxon-beta-2-released/page__st__140#entry138597 |
|
248 | Core | Feature Request | Medium | Support for hibernation by caching to SD card | Closed | |
Task Description
It would be very desirable that the PandoraOS could hibernate, and that this action can easily be accessed/triggered with either a hotkey or as an action for the max-idle-time-event or lid-close-event.
That would be the battery friendly universal action to quickly pause/resume any arbitrary application/task.
The current standby mode is far to power consuming for breaks longer than ~ 1 hour. Improving standby mode to be more battery-friendly would of course be too highly appreciated and practical.
If hibernation is triggered, RAM content gets written to a special file or partition on a SD card. The boot-manager of course needs to recognize such a RAM-file on SD-cards. In case it finds more than 1, i.e.: multiple cards/partitions, the one with the newest timestamp gets priority.
256MB RAM with about 10-20 MB/s read/write time to SD, would result in 25-12 seconds for going into or out of hibernation, which would be acceptable for me. In practice it would mean, that if I quickly have to pause me OpenPandora operation (i.e. train stop), I just close my lid, and put the Pandora into my pocket (2-4 seconds), and I am then trusting that the rest reliable happens in my pocket (10-20 seconds). |
|
157 | Core | Bug Report | Low | Thunar and stilus | Closed | |
Task Description
With Thunar 1.1 and OS Zaxon (hotfix 3) :
- with detail view
- I open Thunar
- I click with the stilus to select the SD card
- I double click with the stilus to open a folder
=> click with the stilus doesn't select file/folder anymore
(I know it is a known bug, but it is not in the list) |
|
207 | Core | Bug Report | Medium | Touchscreen calibration / use of nubs conflict | Closed | |
Task Description
When using certain apps like Basilisk 2 / Dosbox / Enigma the analogue stick and touchscreen are both available to use as a mouse cursor.
All is well with the touch until you decide to touch the analogue stick when then affects touchscreen alignment by about 2 - 3 CM.
This has been going on since first release. |
|
231 | Core | Bug Report | Low | Touchscreen not accurate on the edges - Calibration doe ... | Closed | |
Task Description
The touchscreen is accurate in the middle of the screen but precision is off by one or more mm near the edges of the screen. Recalibrating and rebooting does not help.
Seems like this is just a permission problem - tslib saves calibration data to /etc/pointercal which is noch writeable for the regular user.
Changing permission on that file to 666 solves this, but i guess starting the calibration tool with root permission (gksu?) would be a better solution. |
|
181 | Application | Bug Report | Low | Triple click in Thunar crash | Closed | |
Task Description
Triple tapping (with the stylus) a directory in Thunar in icon or compact mode (not detail view) causes Thunar to close (crash)
This is consistently repeatable: tapping three times in rapid succession on the same spot of the file causes the crash. It must be the exact same spot, as if double clicking, but a third tap is added. This can be triggered especially when a user becomes frustrated at mistapping, gets carried away, and taps too much. |
|
108 | Base OS | Feature Request | Critical | TUN/TAN-Driver | Closed | |
Task Description
There is no TUN/TAN Driver installed. This is recommanded for some encrypted wireless lan connections, especially for eduroam, a world wide access point for the education community. Also, a tun-driver is also recommended for vpnc. |
|
224 | Core | Bug Report | Low | Unresponsive start menu since HF5 | Closed | |
Task Description
Since hotfix 5, the start menu often pauses for a few seconds, not letting me select anything or move the mouse.
Other people have reported the issue as well:
http://boards.openpandora.org/index.php?/topic/2295-is-the-xfce-menu-trolling-anyone-else/page__gopid__42559#entry42559 |
|
186 | Application | Bug Report | Medium | unusable "Manage LCD Gamma" tool | Closed | |
Task Description
Pandora Menu -> Settings -> LCD-Settings -> Manage LCD Gamma
Removing all the profiles listed there will make the user unable to even create a new one. The tool becomes unusable. I hope a re-flash would fix the problem.
The last profile in the list, or the Default one, shouldn't be deletable at all. |
|
275 | Core | Feature Request | Low | User should be a member of the cdrom group | Closed | |
Task Description
These permissions are needed for CD/DVD burning/player apps.
From bdc88595d8af726b3bf4745ece310f92299d8759 Mon Sep 17 00:00:00 2001
From: Paul Dersey
Date: Sun, 19 Feb 2012 17:22:41 -0500
Subject: [PATCH] pandora-first-run-wizard: add user to cdrom group
---
recipes/pandora-system/pandora-first-run-wizard.bb | 2 +-
.../pandora-first-run-wizard/first-run-wizard.sh | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/recipes/pandora-system/pandora-first-run-wizard.bb b/recipes/pandora-system/pandora-first-run-wizard.bb
index 904dc4a..a63dc0c 100755
--- a/recipes/pandora-system/pandora-first-run-wizard.bb
+++ b/recipes/pandora-system/pandora-first-run-wizard.bb
@@ -6,7 +6,7 @@ RDEPENDS = "hsetroot zenity dbus pandora-wallpaper-official tslib tslib-calibrat
COMPATIBLE_MACHINE = "omap3-pandora"
-PR = "r28"
+PR = "r29"
SRC_URI = " \
file://first-run-wizard.sh \
diff --git a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
index a801e3f..f30b80e 100755
--- a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
+++ b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
@@ -88,7 +88,7 @@ while ! username=$(zenity --title="Enter your username" --entry --text "Please c
zenity --title="Error" --error --text="Please try again." --timeout 6
done
-while ! useradd -c "$name,,," -G adm,audio,video,netdev,wheel,plugdev,users "$username" ; do
+while ! useradd -c "$name,,," -G adm,audio,cdrom,netdev,plugdev,users,video,wheel "$username" ; do
username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
done
--
1.7.8.3 |
|
203 | Core | Bug Report | Low | Video-out setting window does not exit on OK | Closed | |
Task Description
The "video-out" window opens again if you choose OK button. |
|
142 | Core | Feature Request | Medium | Visible Sleep Indicator | Closed | |
Task Description
Could we please get a visual indication that the Pandora is in sleep/low-power mode? I would suggest one of the case LEDs either turn on or blink to indicate the sleep mode. |
|
154 | Core | Bug Report | High | Vpn doesn't work | Closed | |
Task Description
When clicking on the Network Manager Applet Symbol, then selecting "VPN Connections" and then "Configure VPN", all the buttons in the following dialoge are greyed out. There is no way to add a new vpn connection. Restarting the system or deactivating the WiFi and then reactivaing it doesn't help. |
|
165 | Core | Bug Report | Low | VPNC does't work | Closed | |
Task Description
vpnc doesn't work |
|
255 | Core | Bug Report | Medium | Waking Pandora with closed lid nevertheless turns scree ... | Closed | |
Task Description
Steps to reproduce the undesired behavior:
1) Close the lid. The screen goes off.
2) Slide the power switch to the right. The device goes into low power mode. The screen remains off.
3) Slide the power switch to the right. The device goes into normal power mode and turns on the screen although the lid is still closed!
Desired behavior:
Ad 3) If the system catches the event "wake from low power mode" it should first wake the system, then check the "lid open/close state", and set the screen on/off state accordingly. By this you could use the Pandora as a power-efficient sleep/wake-able closed-lid-device, practical for i.e. audio applications.
I am using: Pandora OS R1.HF6.A4 |
|
141 | Base OS | Bug Report | High | When using an unlabeled SD card, Hotfix3 final can't un ... | Closed | |
Task Description
I had beta 1 of hotfix 3, and there turning the pandora into a cardreader worked fine for that card. However, I just installed the latest hotfix 3 final, but that one fails to unmount. Attached is the pndrunop_storage.out. Apparently something's going wrong with the splitting of the partition name, as it tries to unmount /dev/mmcblk0 instead of /dev/mmcblk0p1
Manually unmounting it by using sudo umount /dev/mmcblk0p1 does work, but then I can't use the tool because that apparently only lists mounted memorycards. |
|
144 | Core | Bug Report | Low | Wifi LED does not always get re-activated after enablin ... | Closed | |
Task Description
Wifi LED does not always get re-activated after enabling wifi.
It seems that the led trigger which ought to be set to [phy0dadio] no longer exists and the phy# seems to increment (up to at least 11 I have observed)
If I set the trigger to phy##radio then the notification works again, but I'm not sure of the best way to fix this. I suppose a quick hack to the wl1251-init script is the place to start. |
|
313 | Core | Bug Report | Low | WiFi LED Not Triggered on First Activation | Closed | |
Task Description
The first time WiFi is enabled after boot, using either the the config button menu or the Toggle WiFi menu option the WiFi LED does not light up. (though the WiFi itself does work)
Once it has been enabled and disabled for the first time, it will work normally for subsequent uses of the WiFi toggle.
If the Toggle WiFi script is launched for the first time from the terminal the LED does light up.
This is the case in SuperZaxxon 1.53 with all current upgrades applied, and reportedly since the introduction of SuperZaxxon.
checking /sys/class/leds/pandora::wifi/trigger while the WiFi is enabled but the LED off shows that the trigger has been successfully set to phy0radio
Also noted while investigating this:
If Wifi is enabled for the first time from the terminal the following errors are generated by /etc/init.d/wl1251-init
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
Usage: insmod filename [args]
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
The commands that generate these errors are only executed if the mac80211 module is not already loaded - and that module is not unloaded when wifi is disabled. This seems to be unrelated to the issue being reported, however I can't see any cause for the issue at all, so I figured it was worth including it in the report anyway. |
|
109 | Core | Bug Report | Medium | Wifi looses connection after 20-30 minutes | Closed | |
Task Description
While logged into XFCE and browsing for an extended period the wireless will loose its connection. It will not reconnect until the Wifi is toggled off and back on again using the ToggleWifi application.
I have not tested this on an unsecured network. My wireless is WPA2 encrypted. |
|
125 | Core | Bug Report | Low | wrong error handling in wl1251 platform initilization | Closed | |
Task Description
in
http://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blob;f=arch/arm/mach-omap2/board-omap3pandora.c;h=c6637426bf3a61f5bd0f85338304d0d8d114f67d;hb=HEAD
I see:
555 ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
556 if (ret < 0)
557 goto fail_nreset;
the goto should go to: fail_irq instead of fail_nreset
Denis |
|
173 | Core | Bug Report | High | X uses 100% cpu in low power mode | Closed | |
Task Description
After 10 minutes in low power mode X seems to go nuts and use 100% CPU. Obviously this is bad ;-) 14MHz isn't *that* slow, so there's obviously something getting wedged.
I haven't been able to figure out exactly what's happening, but the fact that it always occurs after exactly 10 minutes suggests its power management related. Maybe we're getting stuck trying to kick off the screensaver, or something?
Hacking op_power.sh do disable screen blanking shows that, unsurprisingly, the screen freezes at the same time X goes AWOL.
Pressing the power switch brings the device out of low power mode, though there is often a few seconds additional delay as the event handling scripts take longer than normal to run because the CPU is already busy.
I've attached the results of
top -b -d 60 > toplog &
while sleep 60 ; do cat /proc/loadavg; done > loadlog |
|
211 | Core | Bug Report | Low | x11vnc server (in xfce menu - > network) does not work! | Closed | |
Task Description
x11vnc launcher in xfce menu -> network does not work.
can this be fixed please. |
|
89 | Base OS | Bug Report | Medium | XFCE not loading up defaults when MiniMenu is selected ... | Closed | |
Task Description
When mini menu is set to the default menuing system, XFCE settings (selected theme, pandora-specific key bindings) do not get loaded by default, they need to be forced by opening a terminal and typing xfwm4 --replace |
