|
111 | Core | Feature Request | Medium | Minimal Boot to X_Term / Pico | Closed | |
Task Description
Can we add an option to the boot menu for a minimal boot to X-term, and include Pico in the base OS?
This would allow us to fix problems we've caused by messing around with starup scripts etc.. |
|
184 | Core | Feature Request | Medium | libpnd: Add a function to get all mounted PNDs | Closed | |
Task Description
Add a function to get all mounted PNDs. Because it's very annoying to check all the menu/desktop folders on all of the SD-Cards. |
|
228 | Core | Bug Report | Low | libpnd must be linked to libstdc++ | Closed | |
Task Description
Run "ldd -r /usr/lib/libpnd.so.1", and a number of undefined symbols are listed. These become a problem when attempting to load libpnd in Python. I imagine it could be a problem when attempting to load libpnd in other languages as well.
This can be worked around with "LD_PRELOAD=/usr/lib/libstdc++.so" before running a Python program that loads libpnd.
But it can be worked around more easily by linking libstdc++ during compile. Adding "-lstdc++" to line 41 of libpnd's Makefile does it. I'd add a patch, but the attach file button isn't working for me. Still, a simple fix, right? |
|
205 | Core | Bug Report | Medium | libpnd functions and dynamic libs missing | Closed | |
Task Description
tried to compile a simple test application that uses functions from libpnd, namely
pnd_evdev_open(pnd_evdev_e)
pnd_evdev_dpad_state(pnd_evdev_e)
pnd_evdev_closeall()
but all 3 seem to be missing.
yes, i'm linking to libpnd ... but no chance to get it running.
i'm using ivanovic's latest toolchain, which in turn installs "pandora-libpnd-dev_1.0-r40.5_armv7a.ipk" ...
also, there's only the static library available inside, no dynamic libraries. |
|
91 | Base OS | Bug Report | Medium | libaudiofile is installed by codec pack instead of in b ... | Closed | |
Task Description
Certain emulators such as Fuse are reliant on this file and I am assured it should be part of the default load-out (or rather in the HotFix) rather than in the codec pack as it's not a copyright issue. |
|
294 | Core | Bug Report | Low | Left nub not working with kernel 3.2 | Closed | |
Task Description
Left nub doesnt work when powering on into SuperZaxxon Final with kernel 3.2.
Rebooting into kernel 2.6 fixes it until sleeping or powering off. After which rebooting into 2.6 is once again necessary to get the left nub working. |
|
183 | Core | Bug Report | High | Left mouse click and hold = fail | Closed | |
Task Description
When I want to hold and select multiple files its not working. Not with the nubs or the touchscreen.
I can try an easy test by making the select rectangle on the desktop. It only becomes very very tiny. If I try very fast diagonal drag motion on the touchscreen. It becomes a little larger.
Trying to grab scrollbar is the same issue. |
|
143 | Core | Bug Report | Low | LED triggers timer and heartbeat cause freezing when us ... | Closed | |
Task Description
Summary is about all i can dug out now. Somehow related to the PWM driving, because SD, bt and wifi leds work with trigger=timer.
NOTE: power and charger leds are driven by PWM (just so you all know what I'm talking about).
All i wanted to do was to add blinking power led to low power mode and all i get is a frozen pandora :/. |
|
187 | Core | Bug Report | High | LCD turns off after "rdate" updated the date | Closed | |
Task Description
running "sudo rdate -s time.ien.it" will set the brightness of the LCD to 0.
User has to use FN + I to increase it back to a usable level.
"rdate" asks for the super-user password as expected, updates the date as expected, but turns off the screen. |
|
180 | Core | Bug Report | Medium | LCD Brightness Lower = Flashing, Dies. | Closed | |
Task Description
Just try and lower with the Fn+Br- until it starts to flashing and just dies if you go lower. It does go back if you raise it again. Feels wrong. Also no real feel in the brightness getting lower. |
|
215 | Core | Bug Report | Medium | Kingston 32GB Class6G2 SDHC card not working in pandora | Closed | |
Task Description
I have noticed errors like this, but not every time
[ 1455.612792] mmc2: card claims to support voltages below the defined range. These will be ignored.
[ 1455.621795] mmc2: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.
[ 1455.665985] mmc2: new SDIO card at address 0001
This is me plugging in my 32GB SD6G2 Kingston SDHC card.
at [ 1114.484252] is when the file copy started
Errors continue from there until it bombs and remounts the filesystem readonly.
I have tried this with ext3 vfat in various configurations and all fail the same I/O errors
Let me know if I can do anything to help
-------------------------------------
[ 989.496459] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 989.504638] mmc1: new high speed SDHC card at address 0003
[ 989.510620] mmcblk1: mmc1:0003 SD32G 31514112KiB
[ 989.515625] mmcblk1: p1 p2 p3 p4 < p5 p6 >
[ 989.940490] FAT: invalid media value (0x00)
[ 989.944702] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 990.083190] FAT: invalid media value (0x00)
[ 990.087402] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 991.907562] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 991.922943] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 992.002563] mmci-omap mmci-omap.0: MMC IRQ 0x208002 : TC ERRI DCRC
[ 992.003143] mmcblk0: retrying using single block read
[ 992.028411] kjournald starting. Commit interval 5 seconds
[ 992.048553] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 992.092346] kjournald starting. Commit interval 5 seconds
[ 992.237091] kjournald starting. Commit interval 5 seconds
[ 992.259185] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 992.361999] FAT: bogus number of reserved sectors
[ 992.366760] VFS: Can't find a valid FAT filesystem on dev mmcblk1p4.
[ 992.400909] kjournald starting. Commit interval 5 seconds
[ 992.612945] EXT3 FS on mmcblk1p2, internal journal
[ 992.617797] EXT3-fs: mounted filesystem with ordered data mode.
[ 992.787475] EXT3 FS on mmcblk1p3, internal journal
[ 992.792449] EXT3-fs: mounted filesystem with ordered data mode.
[ 993.038940] EXT3 FS on mmcblk1p1, internal journal
[ 993.043884] EXT3-fs: mounted filesystem with ordered data mode.
[ 993.205749] EXT3 FS on mmcblk1p5, internal journal
[ 993.210632] EXT3-fs: mounted filesystem with ordered data mode.
[ 993.510253] FAT: bogus number of reserved sectors
[ 993.515045] VFS: Can't find a valid FAT filesystem on dev mmcblk1p4.
[ 1114.484252] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1114.484802] mmcblk0: retrying using single block read
[ 1115.763946] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1115.765594] mmcblk0: retrying using single block read
[ 1115.984649] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1115.984985] mmcblk0: retrying using single block read
[ 1116.039489] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.039916] mmcblk0: retrying using single block read
[ 1116.094329] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.094757] mmcblk0: retrying using single block read
[ 1116.150146] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.152343] mmcblk0: retrying using single block read
[ 1116.212127] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.212615] mmcblk0: retrying using single block read
[ 1116.267791] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.268280] mmcblk0: retrying using single block read
[ 1116.335723] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.337738] mmcblk0: retrying using single block read
[ 1116.410766] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.413360] mmcblk0: retrying using single block read
[ 1116.488250] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.490234] mmcblk0: retrying using single block read
[ 1116.581390] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.581939] mmcblk0: retrying using single block read
[ 1116.645721] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.646331] mmcblk0: retrying using single block read
[ 1116.933288] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.933715] mmcblk0: retrying using single block read
[ 1117.000518] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.002899] mmcblk0: retrying using single block read
[ 1117.068328] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.070526] mmcblk0: retrying using single block read
[ 1117.128326] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.128753] mmcblk0: retrying using single block read
[ 1117.194183] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.194488] mmcblk0: retrying using single block read
[ 1117.261566] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.262084] mmcblk0: retrying using single block read
[ 1117.328674] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.329956] mmcblk0: retrying using single block read
[ 1117.388061] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.390380] mmcblk0: retrying using single block read
[ 1117.451629] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.452087] mmcblk0: retrying using single block read
[ 1117.510467] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.512725] mmcblk0: retrying using single block read
[ 1117.714874] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.715301] mmcblk0: retrying using single block read
[ 1117.776550] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.778930] mmcblk0: retrying using single block read
[ 1117.841247] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.841674] mmcblk0: retrying using single block read
[ 1122.718658] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1122.719055] mmcblk0: retrying using single block read
[ 1123.265136] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1123.265441] mmcblk0: retrying using single block read
[ 1123.442230] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1123.442413] mmcblk0: retrying using single block read
[ 1126.759338] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1126.759399] mmcblk1: error -110 transferring data, sector 32669824, nr 8, card status 0xc00
[ 1126.807830] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1126.807891] end_request: I/O error, dev mmcblk1, sector 32669824
[ 1126.813934] Buffer I/O error on device mmcblk1p1, logical block 4083726
[ 1126.820556] lost page write due to I/O error on mmcblk1p1
[ 1127.630950] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1127.631011] mmcblk1: error -110 transferring data, sector 32686232, nr 8, card status 0xc00
[ 1127.715179] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1127.715240] end_request: I/O error, dev mmcblk1, sector 32686232
[ 1127.721282] Buffer I/O error on device mmcblk1p1, logical block 4085777
[ 1127.727935] lost page write due to I/O error on mmcblk1p1
[ 1133.399963] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.400024] Spurious DMA IRQ
[ 1133.403411] mmcblk0: retrying using single block read
[ 1133.504821] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.504943] mmcblk0: retrying using single block read
[ 1133.599304] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.599548] mmcblk0: retrying using single block read
[ 1133.767486] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.767578] mmcblk0: retrying using single block read
[ 1134.222564] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1137.074981] mmcblk0: retrying using single block read
[ 1137.465576] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1137.465667] mmcblk1: error -110 transferring data, sector 17316672, nr 72, card status 0xc00
[ 1137.509582] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1137.509643] end_request: I/O error, dev mmcblk1, sector 17316672
[ 1137.515686] end_request: I/O error, dev mmcblk1, sector 17316680
[ 1137.521728] end_request: I/O error, dev mmcblk1, sector 17316688
[ 1137.527770] end_request: I/O error, dev mmcblk1, sector 17316696
[ 1137.533813] end_request: I/O error, dev mmcblk1, sector 17316704
[ 1137.539855] end_request: I/O error, dev mmcblk1, sector 17316712
[ 1137.545867] end_request: I/O error, dev mmcblk1, sector 17316720
[ 1137.551910] end_request: I/O error, dev mmcblk1, sector 17316728
[ 1137.557952] end_request: I/O error, dev mmcblk1, sector 17316736
[ 1137.766906] Aborting journal on device mmcblk1p1.
[ 1137.997436] journal commit I/O error
[ 1138.001037] EXT3-fs error (device mmcblk1p1) in ext3_create: IO failure
[ 1138.225067] ext3_abort called.
[ 1138.228149] EXT3-fs error (device mmcblk1p1): ext3_journal_start_sb: Detected aborted journal
[ 1138.236785] Remounting filesystem read-only |
|
278 | Core | Bug Report | Low | Kernel 3.2.x: broken middle click on right nub | Closed | |
Task Description
Using kernel 3.2.x middle click with the right nub is no longer working. With the "old" kernel you get a middle click when pushing the right nub down, this is no longer the case when eg using SuperZaxxon Beta3 (was already the case in SuperZaxxon Beta1 with kernel 3.2.1). As long as you are using kernel 2.6.27.x middle click is working as expected. |
|
276 | Core | Feature Request | Low | Kernel 3.2.x: add script to activate zram | Closed | |
Task Description
Please add a script to activate zram (RAM compression) when using the new kernel. More info about how to do this is available in this post:
http://boards.openpandora.org/index.php?/topic/7844-superzaxxon-beta-3-released/#entry138834
http://boards.openpandora.org/index.php?/topic/7226-superzaxxon-beta-11-released/page__st__20#entry128665
Please be aware though that Linux-SWAT had to explicitly set a value in "/sys/block/zram0/disksize" to get it work with Slackware. Over here the following is automatically set:
pandora:~$ cat /sys/block/zram0/disksize
61648896
Sadly I can *not* change this value, even using sudo:
pandora:~$ ls -l /sys/block/zram0/disksize
-rw-r--r-- 1 root root 4096 Apr 9 12:51 /sys/block/zram0/disksize
pandora:~$ cat /sys/block/zram0/disksize
61648896
pandora:~$ sudo echo 61648888 > /sys/block/zram0/disksize
-bash: /sys/block/zram0/disksize: Permission denied
Basically the following commands are required in a startup script to automatically create the "compressed swap inside RAM" aka zram (possibly a check if the modprobe was successful makes sense as well as checking for the size of the created ramdisk):
modprobe zram
mkswap /dev/zram0
swapon -p 5 /dev/zram0 |
|
264 | Core | Bug Report | Low | Issues with HOTFIX 6 R1 Beta | Closed | |
Task Description
I started with hotfix 5 and when I used the Left Nub for mouse movement it performed well.
I installed HOTFIX 6 R1 Beta and the Nub works fine except pushing up. It moves the cursor very slow and all other directions just fine. The other nub works just fine as well.
This only began after I installed HF6R1B.
I also had to install the Hotfix twice due to sustained system freeze upon start up on the first attempt.
I enabled gui choice but minimenu does not function it just cycles back to GUI choice. |
|
306 | Core | Bug Report | Low | Issue with Network Notification pop-ups | Closed | |
Task Description
Clicking on the button in a notification used when WiFi is enabled (such as the one stating that Wireless Networks were found), doesn't close the notification. In order to close it, I have to click the X button that's in the top-left. |
|
86 | Base OS | Feature Request | Very Low | Including small development frameworks/projects in the ... | Closed | |
Task Description
It could be nice, if some very small development frameworks were included in the OS since the Pandora should make it as easy as possible for beginners to start programming.
That means: A "Start coding now"-wizard/script can be run from the desktop from which you select the type of project (c++, python, SDL...) you want to do. It copies the framework to SD-Card, opens it in an editor/IDE to see the sourcecode and leads you to the first compile and run. Can be combined with a PND-Packer-script.
Ideas for frameworks:
- a small python template (pygame?)
- a template project for an SDL-project (red square in fullscreen)
- a template project for OpenGL ES (a simple colored triangle)
- a template project for using NEON or DSP
- something with a GUI (QT?)
- general HelloWorlds
- all as simple as possible!
I know that this could help many beginners to actually start programming because the first compile is often hardest step (setting up toolchain, hassle with libs, includes, dependencies, compiler options, choice of editor, makefiles, all that stuff).
Feel free to delete this feature request if it doesn't fit into the bugtracker. |
|
174 | Base OS | Feature Request | Low | Include modem-manager in base image | Closed | |
Task Description
Please consider including the modemmanager package in the base distibution.
This allows 3G wireless dongles to work out of the box (configured via network-manager). |
|
208 | Core | Bug Report | Critical | HOTFIX 4 and 5 Slow WIFI | Closed | |
Task Description
I'm getting 5kb/s with bursts up to 10kb/s if I am lucky.
I have attempted every channel on my router.
Tried every encryption even no encryption.
Tested with the router's wifi speed: 300Mbps 154Mbps and 45Mbps
I'm running Hotfix 5 RC2.
Wifi works fine with my android smartphone, and other wireless devices such as a laptop. |
|
259 | Core | Bug Report | High | Hold switch does NOT lock keyboard! Especially crucial ... | Closed | |
Task Description
Apps, which operate with the Pandora in closed lid mode, such as audio players, server processes, etc, in a button-press-probably environment (as i.e. your pocket) still CAN receive the shoulder button L + R key presses, and if they have a meaning in these programs, they could trigger undesired actions.
And also in the current implementation of the Low Power Mode (See: FS#260) key presses may still be received.
Therefore I strongly propose to implement the HOLD switch to en/dis-able a keyboard lock.
IN DETAIL: This shall be global, meaning that the input processing software (however this is implemented on the Pandora: kernel, driver, … ) keeps the lock state (on/off), and if the keyboard state is off,
a) discards all input, or
b) if it makes sense for some reason/applications (any ideas?) just writes them into a queue/buffer, which gets (partially) executed or made accessible to certain software after the keyboard gets unlocked again.
FYI: I have tested the hold switch with the Pandora Input-Tester, and it is recognized. So my report is definitely a software (and not an hardware) issue. |
|
266 | Application | Bug Report | Low | hf6rc: Unable to enter Low Power Mode with lid shut: | Closed | |
Task Description
Since hf6rc was installed I am unable to enter low power mode.
I did pull up the new lid config settings script and selected switch off screen.
Reproducable.
Nothing happens when the power switch is moved fully to the right for a short time.
I expect it to entry low power mode. quirky for it not too.
workaround: easy - enter LPM before closing lid.
btw: unable to select hf6 in reported version. |
|
268 | Core | Bug Report | Low | HF6: error in op_power.sh | Closed | |
Task Description
When powering the system off after it has been in low power state once, an error is reported by op_power.sh, line 173.
Unfortunately I don't have the full message as it's visible on the console only for a short time before the screen turns off.
From looking at the script, the "fi" in the last line might be superfluous. |
|
267 | Core | Bug Report | High | HF6-Updater.pnd loses pnd_run.sh | Closed | |
Task Description
Several users have reported that running HF6-Updater.pnd leads to a missing /usr/pandora/scripts/pnd_run.sh
Possibly the file is locked by the Updater itself when installing pandora-libpnd_1.0-r56.5_armv7a.ipk
Forum thread:
http://boards.openpandora.org/index.php?/topic/5652-hotfix-6-final-released/page__view__findpost__p__99313 |
|
232 | Core | Bug Report | Low | HF6 - charged completed with lid closed causing keyboar ... | Closed | |
Task Description
HF6 - It seems as when charging finishes with pandora on then charge light goes out (charge completed assuming) keyboard not functioning just gamepad. Can't use letters to cycle through in mini minimenu or use space to pull up ovr settings.
Will test further |
|
213 | Application | Bug Report | Low | Gigolo does not perform it's task | Closed | |
Task Description
In it's current state, Gigolo is flat out broken and (almost) useless. It pretends to to it's job, but can't because it's missing critical pieces of anatomy.
It can mount local filesystems correctly, but then so can thunar, so this is a redundant and useless function. The main reason to use Gigolo is to mount remote filesystems easily, and without having to use the terminal, and to save passwords in your keychain.
The solution to the problem is to perform the following tasks:
sudo opkg install gvfsd-sftp sshfs-fuse
sudo mousepad /etc/modutils/fuse
type "fuse" save and quit
sudo update-modules |
|
83 | Base OS | Bug Report | Low | getting more /media/mmcblk?p1 | Closed | |
Task Description
From a conversation with skeezix:
I'm seeing /media/mmcblk0p1, mmcblk1p1, mmcblk2p1, mmcblk3p1 and mmcblk4p1 - is that something I should worry about? This started after I inserted & ejected my sd card a couple of times.
To which skeezix said:
The system starts at /media/mmcblk0 (with p1 ec being the partition number); if you eject the SD, then stick it back in, it will try to go to the earlier number again, but if some process was watching that SD when you ejected it, the system will nto be able to recycle that number, so you get the next blk number. So if you end up with /media/mmcblk5p1 (say), then it means you've been eject/inserting, and some program or another has been watching the SD instead of letting it go.
Isn't it nicer to cleanup the ones above 1 (so 0 and 1 are there) at startup to avoid confusion? |
|
127 | Application | Bug Report | High | Firefox hangs when selecting the menu bar | Closed | |
Task Description
Just try to do something by accessing the menu, either thru keyboard or ts and it hangs. Maybe a problem with bookmarks ? |
|
249 | Application | Bug Report | High | File Browser Thunar - After 2 nub double-clicks unreact ... | Closed | |
Task Description
If I navigate via keyboard (KEY UP/DOWN to move in lists, ENTER level down, BACKSPACE level up) I experience no problems at all. I can go many levels up/down, change to other folders, etc. No problems.
But if I navigate with the nubs, and using the right-nub-up-direction to trigger a double click, this only works 1-2 times, and from then on, the files/folders in Thunar cannot be clicked any further. I am stuck then.
A look into dmesg reveals this:
keyboard.c Can't emulate rawcode for keycode 139
The timestamp of that specific keyboard.c error messages exactly correlates with the bug occurrence times. (uptime timestamps matched with dmesg timestamps)
I tried alternative filebrowsers such as emelFM2, and there the problem does not exist, meaning I can trigger as many double clicks I want!
I am using HotFix 5 Alpha 4 on an SD card. The bug already annoyed me on a HF5 on the NAND. |
|
235 | Core | Bug Report | Low | File /tmp/currentuser cannot be deleted by other users | Closed | |
Task Description
The system creates a file /tmp/currentuser at the first login of a user. After logging out and in as another user the file still contains the previous user name. An cannot be deleted/overwritten by the new user.
Steps To Reproduce:
At least two users are available and have XFCE GUI enabled.
1. Login as user (eg. guest), a file /tmp/currentuser is created (containing guest)
2. Log out
3. Log in as another user (eg. jgeiss), the file still contains the old name
4. Change GUI to PMenu
5. Log out
6. Log in as first user (guest)
Now the first user (guest) has PMenu as GUI which was set by the second user (jgeiss).
Maybe the permission should be 0666 for this file? |
|
163 | Base OS | Bug Report | Low | DPMS related "display problems" | Closed | |
Task Description
Currently it looks like DPMS is active in xorg (eg when using XFCE). DPMS is normally used for stuff like turning the screen off to save energy. There seems to be no way to configure this while in XFCE. So the default xorg server values are used.
At the moment the screen is turned off after 10mins of inactivity. Problems with this are
a) that the time till it is turned off can not be configured
b) after wakeup from such a DPMS related display shutdown the brightness is set to maximum.
Solution to this:
Deactivate the sleep values via xorg.conf. I am attaching a diff to "[openembedded.git] / recipes / xorg-xserver / xserver-xorg-conf / omap3-pandora / xorg.conf" changing those to "default off". |
|
164 | Core | Bug Report | Low | Display brightness not restored at booting, HF4beta3 | Closed | |
Task Description
The update from Hotfix3 to Hotfix4 beta3 broke restoring of display brightness at boot time. Restoring of brightness after "powersave mode" (aka flipping the power switch for a short time) does work nicely. This might be related to bug #163 ( http://bugs.openpandora.org/index.php?do=details&task_id=163 ) where shutting the display down via DPMS does result in the brightness being lost when getting the display on again.
This is related to the desktop mode (XFCE). Don't know if it does happen for minimenu, too, not tested yet. |
|
100 | Core | Bug Report | Low | Demos & Examples - remove from image | Closed | |
Task Description
/usr/bin/qt4/demos is 9Mb in size and /usr/bin/qt4/examples is 11Mb.
I'm guessing these are only useful for developers. Can they safely be removed?
edit: additionally, /usr/share/vim is 12M. Can those of us who are never going to use VIM remove it? |
|
132 | Base OS | Bug Report | Medium | Deleting big files doesn't work | Closed | |
Task Description
When deleting a file on the SD card, the Pandora OS moves it into the thrash folder in the internal memory. That itself isn't very nice (shouldn't there be a trash folder on the SD card as well, to reduce unnecessary copying?), but if the file is too big for the internal memory, a error message appears, and the file cannot be deleted on the Pandora directly. |
|
137 | Base OS | Feature Request | Low | Default vim config | Closed | |
Task Description
The current vim install does come without any config file. By default this means vim does work in "vi compatible mode" which makes it hardly usable. The attached config file is meant to be used as ~/.vimrc, so it should be added to "/etc/skel/.vimrc". The file is partly based on the default config used by gentoo.
Things this config file sets:
* Start in "vim mode" by default
* activate ruler
* set width of linenumber in ruler
* assume that the terminal uses a dark background
* configure what hitting backspace removed (newlines, ...)
* some magic to have different encoding formats working in a more sane way |
|
152 | Core | Bug Report | High | Data transfer issued between SD slot 1 and 2 | Closed | |
Task Description
It appears that any users are having trouble transferring files from SD cards in slot 1 to SD cards in Slot 2.
Full details here.
http://www.gp32x.com/board/index.php?/topic/55077-looks-like-the-is-a-readtiming-problem-with-sd-reading-when-high-cpu/ |
|
96 | Base OS | Feature Request | Low | Customizable SD mount options | Closed | |
Task Description
Right now writes are really slow because they write synchronously: there should be an option to change this so that the user is first taught how to unmount an sd card then remove it... |
|
182 | Core | Bug Report | Medium | Ctrl + F5 (Fn Lock) Fail | Closed | |
Task Description
So I've tried this a while now with no success. I'm assuming its when Fn is triggered and then pressing Ctrl or Alt it goes away. |
|
126 | Application | Bug Report | Very Low | CPU Speed Typo? | Closed | |
Task Description
If you set the CPU speed to 600 it warns that it is greater than 600. I thought 600 was the guaranteed speed? |
|
302 | Core | Bug Report | Low | Correct keymap not available during login process | Closed | |
Task Description
The correct keymap, as matching the characters printed on the keys, is available when running the First Boot Wizard, but not during login.
This means that special characters like ! ( ) and so on, which you enter via Fn-[2nd key] cannot currently be used in a username nor password.
My first experience with my Pandora was therefore that I had to reflash the OS due to this as I had locked myself out because I used a special character in my first chosen password.
Also reported here:
http://boards.openpandora.org/index.php?/topic/10112-question-mark/#entry188179 |
|
114 | Application | Bug Report | Low | Chromium browser does not support HTTPS/SSL | Closed | |
Task Description
The Angstrom version of Chrome/Chromium web browser fails to open https links. This is a bug which has been fixed upstream, but not in the version packaged for Pandora. |
|
193 | Core | Bug Report | Low | Cannot reach button well in ubuntu x64 | Closed | |
Task Description
Window can also not be resized |
|
95 | Base OS | Bug Report | Medium | Cannot Connect to Ad-Hoc WIFI | Closed | |
Task Description
I am Currently tethering my Mobile Network via my Android Phone
I cannot connect on this WIFI ... it's a Ad-Hoc connection
Everything else works, PC, Netbook's and iPod Touch
But Pandora seems to have some problems |
|
245 | Core | Feature Request | Low | BugTracker: Submitter shall be able to edit bug after p ... | Closed | |
Task Description
I accidentally posted a "feature request" as a "bug report" within the FlySpray BugTracker.
I wanted to correct my mistake.
It was not possible to edit it.
I assigned the bug to myself.
Then I could edit it.
But now I cannot un-assign it from me.
I merely wanted to suggest a feature but not take development responsibility (yet).
For original submitters, who later realize a mistake in their post, there should be a possibility to correct their mistake.
Please un-assign me from #237 #241 #243 and this one #245. Thanks. |
|
160 | Base OS | Bug Report | Low | bug in date/time setting window | Closed | |
Task Description
first time i changed the date/time with no problems afterward every time when i try to change it it gives me "Please select month ..." this happens after selecting the time zone window. |
|
226 | Core | Feature Request | High | Boot from /dev/sda devices requested | Closed | |
Task Description
Boot from usb hard disk not supported. This should be a rather simple fix of adding the sdx devices and adjust the boot scripts??
I was able to put this autoboot.txt on mmc 0:1
setenv bootargs debug root=/dev/sda1 rw rootdelay=2 console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
ext2load sda 0:1 0x80300000 /boot/uImage
bootm 0x80300000
This failed with amongst other things "Block device sda 0 not supported" and something about failing to load kernel
So I then changed the autoboot file to this
setenv bootargs debug root=/dev/sda1 rw rootdelay=2 console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
ext2load mmc 0:3 0x80300000 /boot/uImage
bootm 0x80300000
All this did was die after the kernel loaded.
I believe I could much better make use of this device if I could boot from some faster storage, please advise :) |
|
84 | Application | Bug Report | Low | Bluetooth stays on | Closed | |
Task Description
You can enable Bluetooth, but can't disable it afterwards from the system -> toggle bluetooth menu shortcut. |
|
304 | Core | Bug Report | Low | bluetooth serial port sleep causes lost / frozen connec ... | Closed | |
Task Description
I experienced (reliably) 3 times that if I had an idle ppp/rfcomm connection to my phone, it would eventually freeze so that the phone reported no active bluetooth connection and the pandora ppp would still think that the connection is active, but no data would flow. Killing pppd and re-trying would fail opening of the rfcomm link with "Host is down".
Disabling & enabling bluetooth "fixed" this so that pppd worked again (so it is not the phone that was "down").
Adding these lines to op_bluetooth_work.sh (apparently atleast) fixed it for me:
add between lines 14-15:
echo 0 > /sys/devices/platform/omap_uart.0/sleep_timeout
(or at any place during enable for that matter)
And to disable (before exit 0, line 30) to save power when bluetooth is off and restore normal settings:
echo 10 > /sys/devices/platform/omap_uart.0/sleep_timeout
I remember mentioning this way back when I last tested bluetooth, but got a reply that this should not be needed because we have flow control between the bt chip and pandora. But if a sleeping serial port loses a character when somebody sends a burst to it, what could flow control do? If it reported not ready to receive, the character would never be sent (and things would freeze...). If it reports ready to receive (what I think it does) the character will be lost. One would need to periodically disable the serial port sleep (and enable ready to receive) for a moment to check for pending data, but I think this would use more power than keeping the serial port active and/or possibly cause way too big delays.
I'm not really certain of this thing (whether this is a workaround, hack or a real fix... and whether my interpretation of what is happening is correct - i have no real proof), but I think that reporting what I've found is better than not. (And am I the only user of bluetooth with an old phone for internet (ppp+rfcomm, not pan)? ...) |
|
131 | Core | Bug Report | Medium | bluetooth drivers read timeout too trigger-happy/logic ... | Closed | |
Task Description
Shamelessly plugged from the forums, to get proper bug tracking and notifications on this. My post:
@notaz:
+ /* there hould be no rx in progress at this point */
+ if (info->rx_skb != NULL) {
+ dev_err(info->dev, "Receive timed out, %i done, %li left, "
+ "LSR=%02x, IER=%02x\n", info->rx_skb->len + 1,
+ info->rx_count, hci_h4p_inb(info, UART_LSR),
+ hci_h4p_inb(info, UART_IER));
+ info->rx_timed_out = 1;
+ }
Could you share your rationale for that comment in drivers/bluetooth/hci_h4p/core.c? (Oh and there's a typo, too :P )
EDIT: Asking this because commenting that block out changed status of bluetooth (for me) from unusable (can receive ~20-500kB of data before ppp connection halting) to fully working - used to have big problems playing 32kbps AAC stream (max 2 min), now already 4 mins of 96kbps, but i still think we need some receive timeout mechanism, but this one (as it currently stands) doesnt work.
Notaz's reply:
I don't really remember, it was more than 1.5 years ago. That driver is a hack, will need to review it, does it work stable with that code removed?
My reply:
For the non-IRC people:
urjaman on IRC said:
(22:47:45) urjaman: notaz: about stability: i'm on irc atm with that driver, its been playing internet radio for a few hours without problems now, but i don know for sure.
(22:48:00) urjaman: *dont know
(22:50:11) urjaman: my logic: if the serial port _never_ misses a byte it should be ok - IMO scary without some receive timeout, but works for me |
|
172 | Core | Bug Report | Low | Angstrom repo's bison is borked (FYI) | Closed | |
Task Description
This is how it tries to call m4 (strace -fF'd):
[pid 4231] execve("/OE/angstrom-dev/sysroots/x86_64-linux/usr/bin/m4", ["/OE/angstrom-dev/sysroots/x86_64"..., "/usr/share/bison/m4sugar/m4sugar"..., "-", "/usr/share/bison/yacc.c"], [/* 38 vars */]) = -1 ENOENT (No such file or directory)
Problem = obvious.
This is here because a) it is the bison that i get with opkg install bison and b) because i could find a general purpose bugtracker for stuff in the angstrom repo with a single googling.
Added info on bison version, etc:
pandora:/media/mmcblk0p3/dev/avrdude-5.6# opkg info bison
Package: bison
Version: 2.3-r5.0.5
Depends: libc6
Provides:
Status: install user installed
Section: devel
Architecture: armv7a
MD5Sum: c8e62fa82a96e9bba4c014c4345062ed
Size: 181368
Filename: bison_2.3-r5.0.5_armv7a.ipk
Description: GNU Project parser generator (yacc replacement).
Installed-Time: 1283127122 |
|
99 | Core | Bug Report | Medium | After waking up from standby the system is not responsi ... | Closed | |
Task Description
If I resume after standby (moved the slider to the right), the pandora shows the desktop and I can move the mouse cursor but if I click something, nothing happens.
IRC suggested that the CPU might still be clocked at the standby low power speed. |
|
200 | Core | Bug Report | Low | After opening the lid, the backlight is not reset to th ... | Closed | |
Task Description
Using the hotkeys to set the backlite, after closing and then opening the lid, the backlight is not reset to the same level it was before closing it.
It seems to set it to a fixed value. |
