|
221 | Core | Bug Report | Medium | 32MB worth of qt4 examples in /usr/bin/qt4 ? | Closed | |
Task Description
Hi, after upgrading to HF5, I accidentally discovered that there are 32MB of qt4 examples & demos in directory /usr/bin/qt4, those examples do work. For instance the /usr/bin/qt4/examples/webkit/fancybrowser/fancybrowser is a working WWW browser.
It is, without any dispute a very useful qt4 development help, but are you sure that you want to include all that in NAND ? |
|
225 | Core | Bug Report | Medium | ads7846 reports odd pressure values | Unconfirmed | |
Task Description
using evdev xorg drivers and not the tslib drivers you can receive pressure axis data however there is
a problem with the values reported by the ads7846 module and the evdev driver has no calibration property for pressure
using
xinput test touchscreen
you can see the pressure axis ranging from 120-ish for hard press to about 150-170 for light press (low pressure values can
be quite erratic)
I could possibly hack the evdev module to possibly do something with this odd and narrow range of values, but I rather think looking
at the source that the ads7846 module needs some work.
is there a git tag that has a known working configuration? as I've had problems getting the kernel to compile the last few times I attempted... |
|
317 | Core | Bug Report | Medium | After disabling USB-host current still flows into USB d ... | Closed | |
Task Description
On my Pandora, due to bad internal WiFi, I use an Edimax EW-7811Un USB WiFi adapter, which has a status-LED, flickering according to the network activity.
After disabling USB-host through the settings menu, the WiFi functionality is gone, but the device's LED is still on. So some current must still flow into the USB device.
The LED now has a permanent light, no flickering! This lack of "device intelligence" indicates that the device was indeed turned off, just current flowing directly to the LED circuit unaltered).
I can repeat the aforementioned steps many times, the behavior is the same.
As soon as I then first physically unplug and reinsert the device, the LED remains off eventually.
From then on, every further issuing of "Disable USB-host" through the settings menu turns the device LED completely off.
Smells like a kernel bug to me! As it requires one real un/re-plugging, from then on works ok. |
|
99 | Core | Bug Report | Medium | After waking up from standby the system is not responsi ... | Closed | |
Task Description
If I resume after standby (moved the slider to the right), the pandora shows the desktop and I can move the mouse cursor but if I click something, nothing happens.
IRC suggested that the CPU might still be clocked at the standby low power speed. |
|
72 | Core | Bug Report | Medium | Automatic Screen Saver crashes SGX Apps | Closed | |
Task Description
The automatic screen saver crashes apps which use the new SGX driver.
Has been tested with pmenu and Quake.
This does NOT happen with the Lid close / open turn off-routine, just with that automatic screen saver that turns of the LCD when you don't press a button for a while. |
|
131 | Core | Bug Report | Medium | bluetooth drivers read timeout too trigger-happy/logic ... | Closed | |
Task Description
Shamelessly plugged from the forums, to get proper bug tracking and notifications on this. My post:
@notaz:
+ /* there hould be no rx in progress at this point */
+ if (info->rx_skb != NULL) {
+ dev_err(info->dev, "Receive timed out, %i done, %li left, "
+ "LSR=%02x, IER=%02x\n", info->rx_skb->len + 1,
+ info->rx_count, hci_h4p_inb(info, UART_LSR),
+ hci_h4p_inb(info, UART_IER));
+ info->rx_timed_out = 1;
+ }
Could you share your rationale for that comment in drivers/bluetooth/hci_h4p/core.c? (Oh and there's a typo, too :P )
EDIT: Asking this because commenting that block out changed status of bluetooth (for me) from unusable (can receive ~20-500kB of data before ppp connection halting) to fully working - used to have big problems playing 32kbps AAC stream (max 2 min), now already 4 mins of 96kbps, but i still think we need some receive timeout mechanism, but this one (as it currently stands) doesnt work.
Notaz's reply:
I don't really remember, it was more than 1.5 years ago. That driver is a hack, will need to review it, does it work stable with that code removed?
My reply:
For the non-IRC people:
urjaman on IRC said:
(22:47:45) urjaman: notaz: about stability: i'm on irc atm with that driver, its been playing internet radio for a few hours without problems now, but i don know for sure.
(22:48:00) urjaman: *dont know
(22:50:11) urjaman: my logic: if the serial port _never_ misses a byte it should be ok - IMO scary without some receive timeout, but works for me |
|
6 | Core | Bug Report | Medium | Calibrate Touchscreen within the Settings-Menu of XFCE ... | Closed | |
Task Description
It doesn't run. |
|
95 | Base OS | Bug Report | Medium | Cannot Connect to Ad-Hoc WIFI | Closed | |
Task Description
I am Currently tethering my Mobile Network via my Android Phone
I cannot connect on this WIFI ... it's a Ad-Hoc connection
Everything else works, PC, Netbook's and iPod Touch
But Pandora seems to have some problems |
|
307 | Core | Feature Request | Medium | Change how Automatic Shutdown works | Unconfirmed | |
Task Description
When thee Pandora is shutting down because its almost out of power, it should check to make sure that the nub inputs are set to the default mode (which is mouse movement for the left nub and mouse buttons for the right nub). If not, it should change them to be like that. |
|
234 | Core | Feature Request | Medium | Changeable behaviour when closing the lid | Closed | |
Task Description
As it was requested on forum.gp2x.de and I think it's a good idea I've written some scripts to allow the user to change what happens when the lid is opened/closed.
There are 3 Settings:
-The old behaviour (turning off the screen)
-Go into low power mode
-Shutdown
Default behaviour is still the same: Turn the screen off. Maybe we could change this to low power mode? I don't know.
I made a lot of changes to op_lid.sh: http://pastebin.com/GT3qxWSx (diff: http://pastebin.com/Z8GwpDj8 )
I changed line 11 in op_power.sh to: if [ $powerstate -ne 0 ]; then
And wrote a gui for changing the setting using zenity: http://pastebin.com/9JvSTqfQ
(I still can't upload any files, don't know if it's the fault of my browser, that's why I use this paste service) |
|
246 | Application | Bug Report | Medium | Clipboard content of closed app gets tossed instead of ... | Unconfirmed | |
Task Description
FLAWED BEHAVIOUR:
Copy and paste only works between 2 active applications. This is very limiting!
If you are in the single task oriented MiniMenu you have no chance at all to share the clipboard between apps!
If you are in the multi tasking oriented XFCE desktop environment you can only share between apps running in parallel! Not with apps which started after the source app has been terminated.
DESIRED BEHAVIOUR:
The clipboard content (within reasonable limits of course) should remain, regardless of the source application, so that you can paste at any later moment into any application. |
|
155 | Core | Bug Report | Medium | Critical problems after rescaling GLES2 X windows | Unconfirmed | |
Task Description
When a X window which is displaying GLES2 render output is:
- Either dragged out of the visibile screen region (?)
- Is made larger than it was at the creation time of the GLES2 context
then:
- The performance will drop significantly as the EGL buffer swaps won't occur as fast as before,
- The render output will be corrupted and flicker
- In rare occasions crashes the application or locks up the entire system (which forces you to remove the battery)
The problem can not be solved without restarting the application (Possibly forcing players to complete the same goals again as they were unable to reach a savepoint or similar things).
This was confirmed in Mupen64Plus and the PowerVR GLES Samples and some of my own projects (which are, however, based on the PowerVR samples).
As I didn't see any other reports about this problems (but had it confirmed by other Pandora users too) I would expect that it can be fixed by using a newer X, kernel or combination of them as other OMAP users would be effected too. |
|
182 | Core | Bug Report | Medium | Ctrl + F5 (Fn Lock) Fail | Closed | |
Task Description
So I've tried this a while now with no success. I'm assuming its when Fn is triggered and then pressing Ctrl or Alt it goes away. |
|
87 | Core | Bug Report | Medium | default /etc/network/interfaces is causing problems | Closed | |
Task Description
The default /etc/network/interfaces has 192.168.1.0/24 subnet set up for usb0 which causes wifi connectivity to fail for users that have wifi on the same subnet.
All addresses should be edited out from /etc/network/interfaces, eth* stuff should probably be dropped too. |
|
132 | Base OS | Bug Report | Medium | Deleting big files doesn't work | Closed | |
Task Description
When deleting a file on the SD card, the Pandora OS moves it into the thrash folder in the internal memory. That itself isn't very nice (shouldn't there be a trash folder on the SD card as well, to reduce unnecessary copying?), but if the file is too big for the internal memory, a error message appears, and the file cannot be deleted on the Pandora directly. |
|
47 | Core | To Do (Reminder) | Medium | evmapperd: Blinking LED and charging control | Closed | |
Task Description
evmapperd should start blinking when the power is getting low.
Ideally, the blinking speed should increase with decreasing battery power and should start maybe at 5% as default (would be nice to have the settings configurable by the user).
As soon as the AC adaptor is connected, blinking should stop.
When the battery power is at 0% it should immediately shutdown and poweroff (NOT to be overridden by the user!)
Aditionally, we should have some charging control (or would it be better using a different daemon for that?)
Here's part of my conversation with MichaelW:
when the charge current was below a threshold, it would reduce the charger input current allowed and take it down to about what the system needs
it would be an active thing constantly sampling the system and constantly updating the input current to match the system
the alternative is that when the battery is full, the charge path is cut off until the battery drops down a bit, maybe 90% |
|
170 | Core | Bug Report | Medium | Executable directories broken | Closed | |
Task Description
Directory type packages fail to run. i.e. dropping a directory containing PXML.xml and a bunch of files onto the SD card rather than a .pnd package.
The application is detected and menu entries created correctly, however pnd_run.sh fails to bind mount the directory due to bogus double quoting. Looks like a failed attempt to handle spaces in the path. Patch below removes these incorrect quotes.
--- pnd_run.sh
+++ pnd_run.sh.old
@@ -161,2 +161,2 @@
elif [ $DFS = directory ]; then
- mntline="sudo mount --bind -o ro ${PND} "
+ mntline="sudo mount --bind -o ro \"${PND}\" " |
|
250 | Application | Feature Request | Medium | File Browser Thunar - Trashing file crosses filesystem ... | Researching | |
Task Description
Trashing a file/folder seems to MOVE it to a certain trash directory on the MAIN VOLUME, rather then the ORIGINATING VOLUME, hence this can result in a COPY RATHER THAN A MOVE operation, if the trashed file originates from a filesystem other than the main filesystem!
This is very inefficient and faulty as it is:
a) Very time consuming
b) And in case of large files this operation can even fail due to not enough free space on the main volume. |
|
204 | Core | Bug Report | Medium | fonts issues | Unconfirmed | |
Task Description
Ok, I just want to say that there is something missing about the font on the base image. I cant get what (at least for now)
Here is an issue : http://www.gp32x.com/board/index.php?/topic/54282-getting-vnc-viewer-to-work/
With my current Ogre build I get :
Warning: Unable to load any usable ISO8859 font
Error: Aborting: no font found
I've googled but so far no solution :( |
|
290 | Core | Bug Report | Medium | gnome-mount not available | Unconfirmed | |
Task Description
In GTK applications, such as Truecrypt, NoteCase Pro or Mousepad, the file open / file save dialogs have shortcuts to mounted file systems on the left side.
If clicking such a shortcut entry, the corresponding file system's contents are shown in the right dialog pane.
This works for file systems, which were available at boot time.
For file systems mounted after booting, e.g. by inserting an SD card or connecting a USB drive, when clicking such an entry, an error message appears saying
"Could not mount [volumen name]
Failed to execute child process 'gnome-mount' (No such file or directory)"
This is healed by
sudo opkg install gnome-mount
(which instals gnome-mount, nautilus, gvfsd-ftp, gvfs (upgrade), and a lot of libs (upgrades)..
This has been seen in SuperZaxxon release 1.5, not in Beta3 (but Beta3 is the only choice in Flyspray's dropdown currently).
I reported that error for HF6 I think, and it seemed to be fixed in SuperZaxxon Beta5. A regression? |
|
331 | Core | Bug Report | Medium | Hold switch key continuously sends X11 KeyPress events ... | Unconfirmed | |
Task Description
When put into Hold mode, X11 handles the power switch as if it's being pressed, and it generates lots of keypress events, passing them to the foreground application. Since /dev/input/eventX does not seem to continuously trigger, I'm guessing it's due to key repeat.
To reproduce:
- Install xev and open it in the terminal
- Put the power key in HOLD mode
- Notice the "time" value changing rapidly
In addition to causing more work to X, it also floods the active application with key presses, resulting in increased CPU usage. In my test, switching to HOLD while Firefox is in the foreground causes it to use 6% CPU and X an additional 2.5%.
In addition, the key-press events continue even after the switch is taken off HOLD until another key is pressed.
A possible solution to this is to blacklist the power-button event device, to prevent evdev from listening to it (the key is handled by pndevmapperd). |
|
215 | Core | Bug Report | Medium | Kingston 32GB Class6G2 SDHC card not working in pandora | Closed | |
Task Description
I have noticed errors like this, but not every time
[ 1455.612792] mmc2: card claims to support voltages below the defined range. These will be ignored.
[ 1455.621795] mmc2: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.
[ 1455.665985] mmc2: new SDIO card at address 0001
This is me plugging in my 32GB SD6G2 Kingston SDHC card.
at [ 1114.484252] is when the file copy started
Errors continue from there until it bombs and remounts the filesystem readonly.
I have tried this with ext3 vfat in various configurations and all fail the same I/O errors
Let me know if I can do anything to help
-------------------------------------
[ 989.496459] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 989.504638] mmc1: new high speed SDHC card at address 0003
[ 989.510620] mmcblk1: mmc1:0003 SD32G 31514112KiB
[ 989.515625] mmcblk1: p1 p2 p3 p4 < p5 p6 >
[ 989.940490] FAT: invalid media value (0x00)
[ 989.944702] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 990.083190] FAT: invalid media value (0x00)
[ 990.087402] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 991.907562] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 991.922943] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 992.002563] mmci-omap mmci-omap.0: MMC IRQ 0x208002 : TC ERRI DCRC
[ 992.003143] mmcblk0: retrying using single block read
[ 992.028411] kjournald starting. Commit interval 5 seconds
[ 992.048553] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 992.092346] kjournald starting. Commit interval 5 seconds
[ 992.237091] kjournald starting. Commit interval 5 seconds
[ 992.259185] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 992.361999] FAT: bogus number of reserved sectors
[ 992.366760] VFS: Can't find a valid FAT filesystem on dev mmcblk1p4.
[ 992.400909] kjournald starting. Commit interval 5 seconds
[ 992.612945] EXT3 FS on mmcblk1p2, internal journal
[ 992.617797] EXT3-fs: mounted filesystem with ordered data mode.
[ 992.787475] EXT3 FS on mmcblk1p3, internal journal
[ 992.792449] EXT3-fs: mounted filesystem with ordered data mode.
[ 993.038940] EXT3 FS on mmcblk1p1, internal journal
[ 993.043884] EXT3-fs: mounted filesystem with ordered data mode.
[ 993.205749] EXT3 FS on mmcblk1p5, internal journal
[ 993.210632] EXT3-fs: mounted filesystem with ordered data mode.
[ 993.510253] FAT: bogus number of reserved sectors
[ 993.515045] VFS: Can't find a valid FAT filesystem on dev mmcblk1p4.
[ 1114.484252] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1114.484802] mmcblk0: retrying using single block read
[ 1115.763946] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1115.765594] mmcblk0: retrying using single block read
[ 1115.984649] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1115.984985] mmcblk0: retrying using single block read
[ 1116.039489] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.039916] mmcblk0: retrying using single block read
[ 1116.094329] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.094757] mmcblk0: retrying using single block read
[ 1116.150146] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.152343] mmcblk0: retrying using single block read
[ 1116.212127] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.212615] mmcblk0: retrying using single block read
[ 1116.267791] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.268280] mmcblk0: retrying using single block read
[ 1116.335723] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.337738] mmcblk0: retrying using single block read
[ 1116.410766] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.413360] mmcblk0: retrying using single block read
[ 1116.488250] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.490234] mmcblk0: retrying using single block read
[ 1116.581390] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.581939] mmcblk0: retrying using single block read
[ 1116.645721] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.646331] mmcblk0: retrying using single block read
[ 1116.933288] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.933715] mmcblk0: retrying using single block read
[ 1117.000518] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.002899] mmcblk0: retrying using single block read
[ 1117.068328] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.070526] mmcblk0: retrying using single block read
[ 1117.128326] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.128753] mmcblk0: retrying using single block read
[ 1117.194183] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.194488] mmcblk0: retrying using single block read
[ 1117.261566] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.262084] mmcblk0: retrying using single block read
[ 1117.328674] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.329956] mmcblk0: retrying using single block read
[ 1117.388061] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.390380] mmcblk0: retrying using single block read
[ 1117.451629] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.452087] mmcblk0: retrying using single block read
[ 1117.510467] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.512725] mmcblk0: retrying using single block read
[ 1117.714874] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.715301] mmcblk0: retrying using single block read
[ 1117.776550] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.778930] mmcblk0: retrying using single block read
[ 1117.841247] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.841674] mmcblk0: retrying using single block read
[ 1122.718658] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1122.719055] mmcblk0: retrying using single block read
[ 1123.265136] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1123.265441] mmcblk0: retrying using single block read
[ 1123.442230] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1123.442413] mmcblk0: retrying using single block read
[ 1126.759338] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1126.759399] mmcblk1: error -110 transferring data, sector 32669824, nr 8, card status 0xc00
[ 1126.807830] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1126.807891] end_request: I/O error, dev mmcblk1, sector 32669824
[ 1126.813934] Buffer I/O error on device mmcblk1p1, logical block 4083726
[ 1126.820556] lost page write due to I/O error on mmcblk1p1
[ 1127.630950] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1127.631011] mmcblk1: error -110 transferring data, sector 32686232, nr 8, card status 0xc00
[ 1127.715179] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1127.715240] end_request: I/O error, dev mmcblk1, sector 32686232
[ 1127.721282] Buffer I/O error on device mmcblk1p1, logical block 4085777
[ 1127.727935] lost page write due to I/O error on mmcblk1p1
[ 1133.399963] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.400024] Spurious DMA IRQ
[ 1133.403411] mmcblk0: retrying using single block read
[ 1133.504821] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.504943] mmcblk0: retrying using single block read
[ 1133.599304] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.599548] mmcblk0: retrying using single block read
[ 1133.767486] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.767578] mmcblk0: retrying using single block read
[ 1134.222564] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1137.074981] mmcblk0: retrying using single block read
[ 1137.465576] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1137.465667] mmcblk1: error -110 transferring data, sector 17316672, nr 72, card status 0xc00
[ 1137.509582] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1137.509643] end_request: I/O error, dev mmcblk1, sector 17316672
[ 1137.515686] end_request: I/O error, dev mmcblk1, sector 17316680
[ 1137.521728] end_request: I/O error, dev mmcblk1, sector 17316688
[ 1137.527770] end_request: I/O error, dev mmcblk1, sector 17316696
[ 1137.533813] end_request: I/O error, dev mmcblk1, sector 17316704
[ 1137.539855] end_request: I/O error, dev mmcblk1, sector 17316712
[ 1137.545867] end_request: I/O error, dev mmcblk1, sector 17316720
[ 1137.551910] end_request: I/O error, dev mmcblk1, sector 17316728
[ 1137.557952] end_request: I/O error, dev mmcblk1, sector 17316736
[ 1137.766906] Aborting journal on device mmcblk1p1.
[ 1137.997436] journal commit I/O error
[ 1138.001037] EXT3-fs error (device mmcblk1p1) in ext3_create: IO failure
[ 1138.225067] ext3_abort called.
[ 1138.228149] EXT3-fs error (device mmcblk1p1): ext3_journal_start_sb: Detected aborted journal
[ 1138.236785] Remounting filesystem read-only |
|
180 | Core | Bug Report | Medium | LCD Brightness Lower = Flashing, Dies. | Closed | |
Task Description
Just try and lower with the Fn+Br- until it starts to flashing and just dies if you go lower. It does go back if you raise it again. Feels wrong. Also no real feel in the brightness getting lower. |
|
91 | Base OS | Bug Report | Medium | libaudiofile is installed by codec pack instead of in b ... | Closed | |
Task Description
Certain emulators such as Fuse are reliant on this file and I am assured it should be part of the default load-out (or rather in the HotFix) rather than in the codec pack as it's not a copyright issue. |
|
205 | Core | Bug Report | Medium | libpnd functions and dynamic libs missing | Closed | |
Task Description
tried to compile a simple test application that uses functions from libpnd, namely
pnd_evdev_open(pnd_evdev_e)
pnd_evdev_dpad_state(pnd_evdev_e)
pnd_evdev_closeall()
but all 3 seem to be missing.
yes, i'm linking to libpnd ... but no chance to get it running.
i'm using ivanovic's latest toolchain, which in turn installs "pandora-libpnd-dev_1.0-r40.5_armv7a.ipk" ...
also, there's only the static library available inside, no dynamic libraries. |
|
184 | Core | Feature Request | Medium | libpnd: Add a function to get all mounted PNDs | Closed | |
Task Description
Add a function to get all mounted PNDs. Because it's very annoying to check all the menu/desktop folders on all of the SD-Cards. |
|
45 | Core | Bug Report | Medium | libpnd: Using German descriptions from PND files | Closed | |
Task Description
I have some PNDs which have a german description included. pmenu does use those instead of the english ones (which should be the default if no language is selected). |
|
43 | Core | Bug Report | Medium | libpng missing from the last images (since approx mid o ... | Closed | |
Task Description
Some ports (like SMW, VICE, etc.) stopped working because libpng is missing from the current images.
Installing it does fix that problem.
http://www.angstrom-distribution.org/unstable/feed/armv7a/base/libpng_1.2.42-r2.0.5_armv7a.ipk |
|
260 | Core | Bug Report | Medium | Low Power Mode: Input (keyboard, nub) still taken. Appl... | Unconfirmed | |
Task Description
This is the related documentation:
http://pandorawiki.org/Power_modes#Low_Power
(Please update accordingly as part of the issue resolution)
FROM MY USER EXPERIENCE:
If you put the Pandora into Low Power Mode, then press some keys, and then wake the Pandora back into Normal Mode, your input (both keys and nubs, haven't tried with USB input yet) seem to have triggered something while the device was in Low Power Mode!
What does really happen in Low Power Mode concerning execution and input?
a) Input is received AND triggers as application execution continues
or
b) Kernel/driver queues the input signals into a buffer, and executes them on wake?
If supposition a) or b) is true, then this would be one more reason to properly implement: FS#259
OBSERVANCE EXAMPLE 1:
1) Start MiniMenu. Mentally note down your active tab.
2) Put Pandora to Low Power Mode.
3) Press shoulder button R once.
4) Wake Pandora to Normal Mode. You are now one tab to the right of where you left. Input must have been caught in Low Power Mode, but wether execution of it happened while Low Power Mode or later after wake in Normal power Mode is unclear.
OBSERVANCE EXAMPLE 2:
1) Start gedit (a text editor). Insert the digit "1".
2) Put Pandora to Low Power Mode.
3) Press: CTRL-N 2 CTRL-N 3 CTRL-N 4. (Without the spaces)
4) Wake Pandora to Normal Mode.
5) For a fraction of a second you see the tabs building up. Either the input was really received AND executed while Low Power Mode and what you see is just a delayed window manager refreshment, or the input was queued in Low Power Mode, and only executed on wake. |
|
111 | Core | Feature Request | Medium | Minimal Boot to X_Term / Pico | Closed | |
Task Description
Can we add an option to the boot menu for a minimal boot to X-term, and include Pico in the base OS?
This would allow us to fix problems we've caused by messing around with starup scripts etc.. |
|
262 | Application | Bug Report | Medium | MiniMenu: 1) "Notes line" cannot be deleted. 2) Note li... | Unconfirmed | |
Task Description
Steps to reproduce the bug(s):
1) In MiniMenu select an arbitrary app.
2) Press SPACE to bring up the contextual menu.
3) Select "Edit notes line 1".
4) Insert your string and confirm.
5) Now at a later time you may decide to remove your note line again. Therefore you select the same app again in MiniMenu, then repeat steps 2-3, but this time:
a) Erase all characters so that you get an empty string and then confirm. RESULT: Your change is simply ignored! There should be a possibility within MiniMenu to remove/reset note lines, the simplest being to simply accept an empty string as an input, that's what an average user will try if s/he does not find a dedicated "Delete note line" command.
b) As a workaround I tried something and detected yet another bug! As I could not create an empty string, I simply created a note line only containing 1 SPACE character (=the string " ") and confirmed. This got accepted.
If MiniMenu is in detailed view mode (press the A-button or TAB in order to bring it up, if it is not already there) and you slide over an app whose note line is " ", MiniMenu crashes!
Maybe the bug is connected with the writing to / the parsing from the .OVR (override) files which MiniMenu creates for the affected files, as the separating value in OVR files seems to be TAB, and SPACE is also WHITESPACE, therefore some parsers probably skip/misinterpret this, and MiniMenu then catches an unexpected situation!
WORKAROUND: If you ran into the problem, that you cannot get rid of the note lines anymore, simply start a file browser of your choice, navigate to the location of the affected .PND file and find its sister .OVR (override) file and delete it or edit it accordingly! |
|
265 | Application | Bug Report | Medium | MiniMenu: Flawed tab display of sub-categories if they ... | Unconfirmed | |
Task Description
I assigned personal subcategories to some of my games.
Some of those subcategories share the same beginning string, i.e: Shooter, ShooterBallistic ShooterScoller.
MiniMenu displays those subcategories with flaws! See the ASCII screenshots below.
Note: The star symbols indicate the currently active selection.
The main category tab "Game" being active:
----------------------------------------------------------
| All | Audio | AudioVideo | Education |*Game*| Graphics |
----------------------------------------------------------
ActionGame AdventureGame ArcadeGame BlocksGame ...
Shooter ShooterBallistic ShooterScroller ...
GameA GameB GameC ...
----------------------------------------------------------
Now if I navigate into the sub-category "Shooter", everything normal:
----------------------------------------------------------
|*Shooter*|
----------------------------------------------------------
.. ShooterA ShooterB ShooterC ...
----------------------------------------------------------
But if I navigate to the sub-category "ShooterBallistic", strangely MiniMenu shows 2 tabs, "Shooter" and "ShooterBallistic", and jumps right into "Shooter".
----------------------------------------------------------
|*Shooter*| ShooterBallistic |
----------------------------------------------------------
.. ShooterA ShooterB ShooterC ...
----------------------------------------------------------
In order to reach my intended tab "ShooterBallistic" I need to navigate to it again. Annoying. There the contents are as expected:
----------------------------------------------------------
| Shooter |*ShooterBallistic*|
----------------------------------------------------------
.. ShooterBallisticA ShooterBallisticB ShooterBallisticC
----------------------------------------------------------
The flaw is the same for all other sub-categories beginning with "Shooter...". All have the flaw as shown in the example "ShooterBallistic", only that it is themselves instead of "ShooterBallistic". One more example to be perfectly clear:
----------------------------------------------------------
| Shooter |*ShooterScroller*|
----------------------------------------------------------
.. ShooterScrollerA ShooterScrollerB ShooterScrollerC
---------------------------------------------------------- |
|
243 | Application | Feature Request | Medium | MiniMenu: Pressing successive character keys should com... | Unconfirmed | |
Task Description
Imagine this tab content:
Nubs, Pandora Input, PNDstore.
CURRENT BEHAVIOR:
Pressing "P" and "N" is succession jumps to "Nubs" eventually, as it first jumps to the first "P" item ("Pandora Input"), then to the first "N" item, "Nubs".
DESIRED BEHAVIOR:
That it acts like in most Linux file browsers or the Mac OS X Finder.
In detail: Pressing "P" and "N" within a certain time limit should combine them to the string "PN" and jump to the first item which starts with that string, i.e. "PNDStore". If no item matches, reduce the combination string by one character, try to match again, if that doesn't match, try matching again with one character less, ... , until only one character is left, and if that one doesn't match jump to the nearest previous lexicographical character, which matches. |
|
301 | Core | Bug Report | Medium | Missing X keybinding for colon symbol | Unconfirmed | |
Task Description
As verified with xev, an attached bluetooth keyboard can not generate colon (shift semicolon). xmodmap shows that (unlike a standard Linux system) shift-semicolon is mapped to NoSymbol. While it's find that there's a special symbol to get semicolon on the built-in keyboard, the other binding really should be there in support of attached keyboards. |
|
310 | Core | Bug Report | Medium | mkdosfs is broken - creates 1GiB filesystems | Closed | |
Task Description
When a partition is bigger than 2 or 4 GiB (can't recall now) it makes a "default" 1GiB filesystem. Propably missing large file support in the build. Also, the pandora sd card formatter is missing -F 32 so it makes (i think, it is some time from when I noticed this) FAT16 partitions... |
|
56 | Core | Bug Report | Medium | Movie Playing (Totem, VLC and MPlayer) | Closed | |
Task Description
Not really a bug report, just an information what issues what player has (tested using image from Feb 22nd).
MPlayer is missing a library in this image:
libxxf86dga1
Installing that one manually does make it work.
* VLC:
Plays things, but switching to fullscreen and back causes VLC to start having issues.
I wouldn't recomment VLC.
* Totem:
Works well (fullspeed video playing) when you disable the sidebar.
With the sidebar enabled, it doesn't play videos in fullscreen.
Menus are behind the video overlay as well as the controls in fullscreen mode (which is a bummer).
Needs about 10% more for the same movie than MPlayer (and therefore, stutters more often when mmcqd eats up CPU power)
* MPlayer:
Works well (fullspeed video playing) when video out is set to XV.
Audio out needs to be set to OSS. If set to Alsa, it segfaults when scrubbing around or doing a fast forward (see segfault below).
Runs very well in fullscreen, including controls on the bottom.
Does have issues displaying videos in windows (usually shows black, unless you resize the window).
Cache should be set to 40000. This will almost remove the stuttering when mmcqd accesses the SD card.
Menu is behind the video stream as well.
Only bad thing about Gnome MPlayer is, that you can't run it in fullscreen automatically when a video is loaded.
So basically, MPlayer is the best we have at the moment.
Fullscreen is really working flawlessly. Maybe we could change Gnome MPlayer to some fullscreen GUI (like the MPlayer for the Wii, etc.).
For a first release, it already works well enough.
Just need to make sure we include default settings as described above (most important: OSS sound!)
In case anyone wants to debug, here is the segfault that happens when using ALSA and fast forwarding:
[ 976.602203] Unable to handle kernel paging request at virtual address ffc84000
[ 976.609466] pgd = cf770000
[ 976.612182] [ffc84000] *pgd=8f842011, *pte=00000000, *ppte=00000000
[ 976.618530] Internal error: Oops: 807 [#1]
[ 976.622650] Modules linked in: g_cdc pvrsrvkm ipv6 ads7846 hwmon
[ 976.628723] CPU: 0 Not tainted (2.6.27-omap1 #1)
[ 976.633758] PC is at memset+0x30/0xc0
[ 976.637420] LR is at 0x0
[ 976.639984] pc : [] lr : [] psr: 20000093
[ 976.639984] sp : cf5abe04 ip : 00000000 fp : cf5abe24
[ 976.651519] r10: ffffe0a4 r9 : 00001d4c r8 : 00004c3b
[ 976.656799] r7 : ffffe0a4 r6 : cf8975c0 r5 : ffffc148 r4 : cfaed400
[ 976.663360] r3 : 00000000 r2 : 1ff8b350 r1 : 00000000 r0 : ffc83ffc
[ 976.669921] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
[ 976.677185] Control: 00c5387f Table: 8f770018 DAC: 00000015
[ 976.682952] Process mplayer (pid: 1781, stack limit = 0xcf5aa2e8)
[ 976.689086] Stack: (0xcf5abe04 to 0xcf5ac000)
[ 976.693481] be00: c02b4e00 cfae0a00 cfaed400 00005007 cf8975c0 cf5abe5c cf5abe28
[ 976.701873] be20: c02b2f74 c02b4da4 cf8975c0 cf5abe38 c0066db0 cfaed400 00005007 cf8975c0
[ 976.710235] be40: 00004c3b cf8975c0 00001d4c 00000000 cf5abe7c cf5abe60 c02b36f8 c02b2d94
[ 976.718627] be60: 00001d4c cfaed400 cf8975c0 00000000 cf5abecc cf5abe80 c02b3b50 c02b362c
[ 976.726989] be80: c00699fc c00382ac cf5abeb0 00000000 00ecdda0 00000000 cf5abee4 cf5abea8
[ 976.735382] bea0: c006a104 00001d4c 400c4150 cf8975c0 bef6050c c002ee44 cf5aa000 00000000
[ 976.743774] bec0: cf5abeec cf5abed0 c02b3dbc c02b3ac8 c02b31c4 bef6050c c002ee44 00000000
[ 976.752136] bee0: cf5abf1c cf5abef0 c02b1188 c02b3d64 c04ae8a0 00000000 00ecdda0 00001d4c
[ 976.760528] bf00: bef6050c 400c4150 bef6050c cf778760 cf5abf34 cf5abf20 c02b1504 c02b10d4
[ 976.768890] bf20: cf5abf5c cf778760 cf5abf54 cf5abf38 c00aa8ac c02b14d0 bef60548 cf778760
[ 976.777282] bf40: bef6050c 00000007 cf5abf7c cf5abf58 c00aab4c c00aa880 c0066e74 bef60548
[ 976.785675] bf60: cf5abf80 00000007 bef6050c 400c4150 cf5abfa4 cf5abf80 c00aaba4 c00aa8fc
[ 976.794036] bf80: 4b82cf18 00000000 00da2268 00da22b8 00000000 00000036 00000000 cf5abfa8
[ 976.802429] bfa0: c002ecc0 c00aab70 00da2268 00da22b8 00000007 400c4150 bef6050c bef6050c
[ 976.810821] bfc0: 00da2268 00da22b8 00000000 00000036 00d40628 00000000 00000000 00871348
[ 976.819183] bfe0: 00887178 bef60508 4012354c 4071963c 60000010 00000007 b601206b df08c3ff
[ 976.827575] Backtrace:
[ 976.830047] [] (snd_pcm_format_set_silence+0x0/0x13c) from [] (snd_pcm_playback_silence+0x1ec/0x2ac)
[ 976.841033] r6:cf8975c0 r5:00005007 r4:cfaed400
[ 976.845703] [] (snd_pcm_playback_silence+0x0/0x2ac) from [] (snd_pcm_update_hw_ptr+0xd8/0x1b4)
[ 976.856140] [] (snd_pcm_update_hw_ptr+0x0/0x1b4) from [] (snd_pcm_lib_write1+0x94/0x23c)
[ 976.866058] r7:00000000 r6:cf8975c0 r5:cfaed400 r4:00001d4c
[ 976.871765] [] (snd_pcm_lib_write1+0x0/0x23c) from [] (snd_pcm_lib_write+0x64/0x70)
[ 976.881256] [] (snd_pcm_lib_write+0x0/0x70) from [] (snd_pcm_playback_ioctl1+0xc0/0x3fc)
[ 976.891174] r4:00000000
[ 976.893737] [] (snd_pcm_playback_ioctl1+0x0/0x3fc) from [] (snd_pcm_playback_ioctl+0x40/0x44)
[ 976.904083] r7:cf778760 r6:bef6050c r5:400c4150 r4:bef6050c
[ 976.909820] [] (snd_pcm_playback_ioctl+0x0/0x44) from [] (vfs_ioctl+0x38/0x7c)
[ 976.918853] r4:cf778760
[ 976.921417] [] (vfs_ioctl+0x0/0x7c) from [] (do_vfs_ioctl+0x25c/0x274)
[ 976.929748] r6:00000007 r5:bef6050c r4:cf778760
[ 976.934417] [] (do_vfs_ioctl+0x0/0x274) from [] (sys_ioctl+0x40/0x64)
[ 976.942657] r6:400c4150 r5:bef6050c r4:00000007
[ 976.947326] [] (sys_ioctl+0x0/0x64) from [] (ret_fast_syscall+0x0/0x2c)
[ 976.955749] r7:00000036 r6:00000000 r5:00da22b8 r4:00da2268
[ 976.961486] Code: e1a0c001 e1a0e001 e2522040 a8a0500a (a8a0500a)
[ 976.967773] ---[ end trace 83bdb29850a1e142 ]--- |
|
30 | Core | Bug Report | Medium | New issues in current image (pandora-20100102-new-kerne ... | Closed | |
Task Description
* It takes forever to startup.
It hangs while trying to initialize the new SDIO-WiFi:
[ 2363.922271] wl1251: WARNING WLAN not ready
[ 2363.927581] wl1251_sdio mmc2:0001:1: firmware: requesting wl1251-fw.bin
[ 2423.930328] wl1251: ERROR could not get firmware: -2
[ 2424.033447] wl1251: ERROR sdio write failed (-110)
[ 2425.786071] wl1251: ERROR sdio read failed (-110)
[ 2425.790893] wl1251: WARNING WLAN not ready
[ 2425.795776] wl1251_sdio mmc2:0001:1: firmware: requesting wl1251-fw.bin
* OpenPandora Start-Button is too small (has the same width as a normal icon) |
|
177 | Core | Bug Report | Medium | no x or xfce after shutdown and reboot | Closed | |
Task Description
often but not always after shutting down the system (xfce logout, choose shutdown) thereĀ“s a problem when booting again.
i got the normal bootscreen but when x an xfce should start the screen remains black. i cannot say if the x or xfce didnĀ“ start or if it is a problem with the backlight intensity.
rebooting with pandora key and power key leads to the same situation. the only thing that seems to help is to remove the battery shortly.
so, what is the difference beetween reboot after powerdown and reboot after replacing the battery? there could be the point to fix this problem. |
|
16 | Core | Bug Report | Medium | normal user login fails over serial/ttys | Closed | |
Task Description
Only root can login over serial or ttys, and only if it has no password. Ssh login works fine.
After some debugging it seems to be PAM issue, possibly recipes/shadow/ misconfiguration in OE. Maybe we sould use IMAGE_LOGIN_MANAGER = "busybox" instead of IMAGE_LOGIN_MANAGER = "shadow" as we don't need super security? |
|
73 | Base OS | Feature Request | Medium | Nub: Change mouse speed, fix scrolling and add mouse bu ... | Closed | |
Task Description
Currently the nubs can be set to three different modes:
mouse, scroll and absolute
Mode 1 (mouse) works fine, but the speed is a bit slow.
Mode 2 (scroll) has inverted scrolling and it would be nice if scrolling speed would change according to how far you move it
Aditionally, I would suggest adding another mode: mbuttons (Mouse buttons).
At the moment, you can use the nubs as mouse but don't have any mouse buttons.
I think it would be very convenient if you could set the nubs as mouse buttons:
Move the nub left for left click, right for right click, up for double click and down for middle click.
That way, each user could use the left nub for mouse and the right nub for mouse buttons or vice versa. |
|
332 | Core | Bug Report | Medium | op_lidsettings.sh and op_power.sh scripts fail for some ... | Closed | |
Task Description
/usr/pandora/scripts/op_lidsettings.sh and /usr/pandora/scripts/op_power.sh fail for some usernames due to poor shell scripting
these scripts find their config files by grepping /etc/passwd for the uer currently running xfce4-session, but the loose regexp matches too much. this shell fragment from op_lidsettings.sh:
grep /etc/passwd -e $(ps u -C xfce4-session | tail -n1 | awk '{print $1}')| cut -f 6 -d ":"
when a use called "me" is logged in, returns
/home/root
/usr/games
/var/run/dbus
/home/me
rather than just "/home/me"
all instances of that construct (reading and writing settings, in both op_lidsettings.sh and op_power.sh) should be changed to
grep /etc/passwd -e ^$(ps u -C xfce4-session | tail -n1 | awk '{print $1}'): | cut -f 6 -d ":"
to correctly match only the complete username field in /etc/passwd |
|
176 | Core | Bug Report | Medium | op_power.sh: problematic display brightness restoring a ... | Closed | |
Task Description
Since hotfix4 it is possible to reduce the value for display brightness below '3'. Thus the script op_power.sh (the one used for low power mode) has to be adjusted accordingly. Currently line 25 in this script looks like this:
if [ $oldbright -ge 3 ] && [ $oldbright -le $maxbright ]; then
Please change the "-ge 3" part to "-ge 1" so that lower modes are possible, too. Otherwise the screen will be set to max brightness if you have selected a value of '1' when going into powersave mode.
Somehow it looks like what is possible to select via the hotkeys and what is possible via the "application" differs. In the script op_lcdsettings.sh in line 11 a minimum brightness of 3 seems to be defined, with the hotkeys it is even possible to go down to 0 (screen off) or values like 1 and 2. This is the relevant line:
minbright=3
Brightness restoring appears to be problematic in op_lid.sh, too. Just have a look at line 25 in this script:
if [ $oldbright -ge 3 ] && [ $oldbright -le $maxbright ]; then
Another issue is that the clockrate of 14MHz is simply too low to be reasonable. Please do adjust it to 125MHz instead, since this seems to be what TI recommends and what makes most sense since starting with hotfix4 this is where the lowest powermode (OPP0) is entered. When clocking down to 14MHz issues like the clock not working correctly come up.
Relevant lines in op_power.sh:
line 14, restoring old clockrate:
if [ $oldspeed -gt 14 ] && [ $oldspeed -le 900 ]; then
line 72, setting the clockrate for low power mode:
echo 14 > /proc/pandora/cpu_mhz_max |
|
115 | Base OS | Bug Report | Medium | OS is missing libvorbisidec.so | Closed | |
Task Description
Please add to next hotfix, srb2 needed this file. My temporary hack was to modify the LD_LIBRARY_PATH (didnt like having to so this, but I think the way srb2 is loading the library it wouldnt work without it) and include the library in the pnd.
Once this lib is added ill do an update on srb2 and remove the LD hack. |
|
323 | Core | Bug Report | Medium | OS Selector bug | Closed | |
Task Description
When selecting no OS in the OS Selector you're returned to the login screen where you have to reauthenicate. (Pressing Enter without selecting an OS does this)
I happen to do this a lot and it drives me mad :P |
|
61 | Core | Feature Request | Medium | Packages to remove and include | Closed | |
Task Description
The following packages can be removed:
embryo
gnome-games
gnome-games-blackjack
gnome-games-gnometris
gnome-games-iagno
gnome-games-gtali
gnome-games-gnobots2
xmms-mad
But we need the following ones:
xmms-plugin-input-mpg123
xmms-plugin-input-mikmod
mikmod
libxxf86dga1
epdfview
gnumeric (if possible, would be nice)
I do wonder though if we should remove all gnome-games (and ScummVM) completely.
Makes more sense if we wrap those games up as PND files.
Same goes for the community wallpapers. Should we include them? Or save that space for other things? |
|
315 | Core | Bug Report | Medium | Pairing bluetooth SPP devices doesn't work with XFCE | Unconfirmed | |
Task Description
Hi, sadly the XFCE bluetooth manager seems to have problems with pairing simple SPP devices (an BT GPS mouse here).
1. Enable BT
2. BT Manager -> Add new device
3. Confirm Dialog and wait for scanning
4. Pick device
5. Select PIN options -> "0000" (here for me)
In next step the dialog still asks you to enter a random PIN at your BT device (which is impossible here).
Thus it seems, that the XFCE dialog makes troubles, I tried it with 2 different GPS. Pairing the GPS manually works fine:
sudo rfcomm connect rfcomm0 00:18:E4:26:5F:14 |
|
44 | Core | Bug Report | Medium | Pandora-Start-Menu button too small | Closed | |
Task Description
Since about mid January, the Openpandora-Startmenu-Button doesn't resize when the "Show Title" is enabled.
Therefore, you only see parts of the "OpenPandora"-Title and no icon.
Disabling the title shows the icon. I have no idea how to resize it and why this happened (the theme hasn't been changed as far as I know) |
|
15 | Core | Bug Report | Medium | Permissions / automounted SD Card | Closed | |
Task Description
Only root has write access to automounted SD Cards. The normal user can only read. |
|
98 | Application | Bug Report | Medium | Pidgin freezes (msn) | Closed | |
Task Description
Pidgin freezes when using the msn protocol. Sometimes it can last 25 minutes before doing so, sometimes it freezes instantly. Usually it's after only a few minutes. Once it freezes you are still able to close it using the built in crash manager (?!)
This happens both when running from XFCE and Minimenu. |
|
279 | Core | Feature Request | Medium | pidgin requires (more) locales to work correctly | Closed | |
Task Description
Please add the following package to allow umlauts working in pidgin:
glibc-gconv-utf-16
After installing this package I no longer have a problem receiving umlauts in pidgin. Besides it might also make sense to add "glibc-gconv-cp1250" which might be required for western europe and koi8-r which seems to be missing for xchat and conversion of chars there.
At the moment the following locale related packages are installed (as of SuperZaxxon Beta3):
glibc-charmap-utf-8 - 2.9-r35.3.5
glibc-gconv - 2.9-r35.3.5
glibc-gconv-cp1252 - 2.9-r35.3.5
glibc-gconv-ibm850 - 2.9-r35.3.5
glibc-gconv-iso8859-1 - 2.9-r35.3.5
glibc-gconv-iso8859-15 - 2.9-r35.3.5
Please add:
glibc-gconv-cp1250
glibc-gconv-koi8-r
glibc-gconv-unicode
glibc-gconv-utf-16
Thanks! |