|
247 | Core | Bug Report | Low | pnd_make.sh can't handle PND with spaces in the path | Closed | |
Task Description
pnd_make.sh can't handle PND with spaces in the path. For example, if the label of the volume where the PND is saved, has spacebars.
The Problem is line 655:
655: PND=$(readlink -f $PND)
Bash handles a path with spacebars as two seperate arguments for the readlink command.
The problem is, that i don't know a solution for this problem. |
|
264 | Core | Bug Report | Low | Issues with HOTFIX 6 R1 Beta | Closed | |
Task Description
I started with hotfix 5 and when I used the Left Nub for mouse movement it performed well.
I installed HOTFIX 6 R1 Beta and the Nub works fine except pushing up. It moves the cursor very slow and all other directions just fine. The other nub works just fine as well.
This only began after I installed HF6R1B.
I also had to install the Hotfix twice due to sustained system freeze upon start up on the first attempt.
I enabled gui choice but minimenu does not function it just cycles back to GUI choice. |
|
266 | Application | Bug Report | Low | hf6rc: Unable to enter Low Power Mode with lid shut: | Closed | |
Task Description
Since hf6rc was installed I am unable to enter low power mode.
I did pull up the new lid config settings script and selected switch off screen.
Reproducable.
Nothing happens when the power switch is moved fully to the right for a short time.
I expect it to entry low power mode. quirky for it not too.
workaround: easy - enter LPM before closing lid.
btw: unable to select hf6 in reported version. |
|
268 | Core | Bug Report | Low | HF6: error in op_power.sh | Closed | |
Task Description
When powering the system off after it has been in low power state once, an error is reported by op_power.sh, line 173.
Unfortunately I don't have the full message as it's visible on the console only for a short time before the screen turns off.
From looking at the script, the "fi" in the last line might be superfluous. |
|
275 | Core | Feature Request | Low | User should be a member of the cdrom group | Closed | |
Task Description
These permissions are needed for CD/DVD burning/player apps.
From bdc88595d8af726b3bf4745ece310f92299d8759 Mon Sep 17 00:00:00 2001
From: Paul Dersey
Date: Sun, 19 Feb 2012 17:22:41 -0500
Subject: [PATCH] pandora-first-run-wizard: add user to cdrom group
---
recipes/pandora-system/pandora-first-run-wizard.bb | 2 +-
.../pandora-first-run-wizard/first-run-wizard.sh | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/recipes/pandora-system/pandora-first-run-wizard.bb b/recipes/pandora-system/pandora-first-run-wizard.bb
index 904dc4a..a63dc0c 100755
--- a/recipes/pandora-system/pandora-first-run-wizard.bb
+++ b/recipes/pandora-system/pandora-first-run-wizard.bb
@@ -6,7 +6,7 @@ RDEPENDS = "hsetroot zenity dbus pandora-wallpaper-official tslib tslib-calibrat
COMPATIBLE_MACHINE = "omap3-pandora"
-PR = "r28"
+PR = "r29"
SRC_URI = " \
file://first-run-wizard.sh \
diff --git a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
index a801e3f..f30b80e 100755
--- a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
+++ b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
@@ -88,7 +88,7 @@ while ! username=$(zenity --title="Enter your username" --entry --text "Please c
zenity --title="Error" --error --text="Please try again." --timeout 6
done
-while ! useradd -c "$name,,," -G adm,audio,video,netdev,wheel,plugdev,users "$username" ; do
+while ! useradd -c "$name,,," -G adm,audio,cdrom,netdev,plugdev,users,video,wheel "$username" ; do
username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
done
--
1.7.8.3 |
|
276 | Core | Feature Request | Low | Kernel 3.2.x: add script to activate zram | Closed | |
Task Description
Please add a script to activate zram (RAM compression) when using the new kernel. More info about how to do this is available in this post:
http://boards.openpandora.org/index.php?/topic/7844-superzaxxon-beta-3-released/#entry138834
http://boards.openpandora.org/index.php?/topic/7226-superzaxxon-beta-11-released/page__st__20#entry128665
Please be aware though that Linux-SWAT had to explicitly set a value in "/sys/block/zram0/disksize" to get it work with Slackware. Over here the following is automatically set:
pandora:~$ cat /sys/block/zram0/disksize
61648896
Sadly I can *not* change this value, even using sudo:
pandora:~$ ls -l /sys/block/zram0/disksize
-rw-r--r-- 1 root root 4096 Apr 9 12:51 /sys/block/zram0/disksize
pandora:~$ cat /sys/block/zram0/disksize
61648896
pandora:~$ sudo echo 61648888 > /sys/block/zram0/disksize
-bash: /sys/block/zram0/disksize: Permission denied
Basically the following commands are required in a startup script to automatically create the "compressed swap inside RAM" aka zram (possibly a check if the modprobe was successful makes sense as well as checking for the size of the created ramdisk):
modprobe zram
mkswap /dev/zram0
swapon -p 5 /dev/zram0 |
|
278 | Core | Bug Report | Low | Kernel 3.2.x: broken middle click on right nub | Closed | |
Task Description
Using kernel 3.2.x middle click with the right nub is no longer working. With the "old" kernel you get a middle click when pushing the right nub down, this is no longer the case when eg using SuperZaxxon Beta3 (was already the case in SuperZaxxon Beta1 with kernel 3.2.1). As long as you are using kernel 2.6.27.x middle click is working as expected. |
|
294 | Core | Bug Report | Low | Left nub not working with kernel 3.2 | Closed | |
Task Description
Left nub doesnt work when powering on into SuperZaxxon Final with kernel 3.2.
Rebooting into kernel 2.6 fixes it until sleeping or powering off. After which rebooting into 2.6 is once again necessary to get the left nub working. |
|
298 | Application | Bug Report | Low | Mousepad only searches once | Closed | |
Task Description
Whenever I search text in an open Mouspad document, it works fine the first time. As soon as I close the search dialogue and re-open it, the "find" (resp "find and replace" in replace dialogue) button is greyed out and unclickable. (This is the state the dialogue is in before typing anything, but this time, typing doesn't help.) "return" also doesn't work. Only help is closing and reopening Mousepad. |
|
302 | Core | Bug Report | Low | Correct keymap not available during login process | Closed | |
Task Description
The correct keymap, as matching the characters printed on the keys, is available when running the First Boot Wizard, but not during login.
This means that special characters like ! ( ) and so on, which you enter via Fn-[2nd key] cannot currently be used in a username nor password.
My first experience with my Pandora was therefore that I had to reflash the OS due to this as I had locked myself out because I used a special character in my first chosen password.
Also reported here:
http://boards.openpandora.org/index.php?/topic/10112-question-mark/#entry188179 |
|
303 | Core | Bug Report | Low | pppd 2.4.3 has a bug, recommend upgrade to ppp 2.4.5 | Closed | |
Task Description
pppd 2.4.3 doesnt auto reconnect (in my setup) even if configured to do so (persist). Found a ppp bug report confirming this ( http://ppp.samba.org/cgi-bin/ppp-bugs/resolved?id=1110;user=guest - "ppp-2.4.3 / pppoe not reconnecting") and that it has been fixed. I compiled pppd 2.4.5 and that reconnects just fine. |
|
304 | Core | Bug Report | Low | bluetooth serial port sleep causes lost / frozen connec ... | Closed | |
Task Description
I experienced (reliably) 3 times that if I had an idle ppp/rfcomm connection to my phone, it would eventually freeze so that the phone reported no active bluetooth connection and the pandora ppp would still think that the connection is active, but no data would flow. Killing pppd and re-trying would fail opening of the rfcomm link with "Host is down".
Disabling & enabling bluetooth "fixed" this so that pppd worked again (so it is not the phone that was "down").
Adding these lines to op_bluetooth_work.sh (apparently atleast) fixed it for me:
add between lines 14-15:
echo 0 > /sys/devices/platform/omap_uart.0/sleep_timeout
(or at any place during enable for that matter)
And to disable (before exit 0, line 30) to save power when bluetooth is off and restore normal settings:
echo 10 > /sys/devices/platform/omap_uart.0/sleep_timeout
I remember mentioning this way back when I last tested bluetooth, but got a reply that this should not be needed because we have flow control between the bt chip and pandora. But if a sleeping serial port loses a character when somebody sends a burst to it, what could flow control do? If it reported not ready to receive, the character would never be sent (and things would freeze...). If it reports ready to receive (what I think it does) the character will be lost. One would need to periodically disable the serial port sleep (and enable ready to receive) for a moment to check for pending data, but I think this would use more power than keeping the serial port active and/or possibly cause way too big delays.
I'm not really certain of this thing (whether this is a workaround, hack or a real fix... and whether my interpretation of what is happening is correct - i have no real proof), but I think that reporting what I've found is better than not. (And am I the only user of bluetooth with an old phone for internet (ppp+rfcomm, not pan)? ...) |
|
305 | Core | Bug Report | Low | [PATCH] bluetooth startup doesnt restore enabled state | Closed | |
Task Description
op_bluetooth.sh doesnt remember to call op_bluetooth_work.sh in the startup case. Patch inlined here (maybe broken, but for fast reading) and behind link: http://urjaman.dyndns.info/bluetooth-startup-fix.patch
--- op_bluetooth.sh.org 2012-11-24 01:54:53.000000000 +0000
+++ op_bluetooth.sh 2012-11-24 02:06:51.000000000 +0000
@@ -7,8 +7,13 @@
cd "$HOME"
if [ "$1" = "startup" ]; then
- [ -f "$LOCK" ] && sudo /usr/sbin/hciconfig "$INTERFACE" up pscan 1>/dev/null && sudo /usr/sbin/bluetoothd || echo "Bluetooth: User has not enabled Bluetooth."
-
+ if [ -f "$LOCK" ]; then
+ sudo /usr/pandora/scripts/op_bluetooth_work.sh 1
+ INTERFACE="`hciconfig | grep "^hci" | cut -d ':' -f 1`"
+ sudo /usr/sbin/hciconfig "$INTERFACE" up pscan 1>/dev/null && sudo /usr/sbin/bluetoothd
+ else
+ echo "Bluetooth: User has not enabled Bluetooth."
+ fi
else
# Figure out if Bluetooth is running or not |
|
306 | Core | Bug Report | Low | Issue with Network Notification pop-ups | Closed | |
Task Description
Clicking on the button in a notification used when WiFi is enabled (such as the one stating that Wireless Networks were found), doesn't close the notification. In order to close it, I have to click the X button that's in the top-left. |
|
312 | Core | Bug Report | Low | Special character in password | Closed | |
Task Description
problem:
setting a username and password using first setup wizzard it's possible to set special character like @#*%/ ect...
the login manager don't support this characters, so you need to reset the device.
possible solution:
1. disable the possibility of setting special characters.
2. implement special characters in login manager. |
|
313 | Core | Bug Report | Low | WiFi LED Not Triggered on First Activation | Closed | |
Task Description
The first time WiFi is enabled after boot, using either the the config button menu or the Toggle WiFi menu option the WiFi LED does not light up. (though the WiFi itself does work)
Once it has been enabled and disabled for the first time, it will work normally for subsequent uses of the WiFi toggle.
If the Toggle WiFi script is launched for the first time from the terminal the LED does light up.
This is the case in SuperZaxxon 1.53 with all current upgrades applied, and reportedly since the introduction of SuperZaxxon.
checking /sys/class/leds/pandora::wifi/trigger while the WiFi is enabled but the LED off shows that the trigger has been successfully set to phy0radio
Also noted while investigating this:
If Wifi is enabled for the first time from the terminal the following errors are generated by /etc/init.d/wl1251-init
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
Usage: insmod filename [args]
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
The commands that generate these errors are only executed if the mac80211 module is not already loaded - and that module is not unloaded when wifi is disabled. This seems to be unrelated to the issue being reported, however I can't see any cause for the issue at all, so I figured it was worth including it in the report anyway. |
|
314 | Core | Bug Report | Low | Pandora-Button doesn't open XFCE menu | Closed | |
Task Description
If you enable the "disapear automaticaly" feature in the XFCE panel, the Pandora button doesn't open the main menu anymore and you need to open it manually with the cursor. |
|
321 | Core | Feature Request | Low | Support overriding all category fields with .ovr | Closed | |
Task Description
Currently only the main category and the first sub category of the main category can be overridden using a .ovr file while libpnd uses additional PXML supplied category date to construct the desktop file. This makes it difficult to work with PNDs that supply unwanted data in these additional fields. |
|
322 | Core | Bug Report | Low | Allow removal of categories using the libpnd category c ... | Closed | |
Task Description
Since some PNDs provide nonstandard categories like GTK or GNOME, it is desirable to extend the libpnd category mapping with the ability to suppress individual categories completely. |
|
334 | Core | Bug Report | Low | op_bright_down.sh: error when decreasing brightness | Closed | |
Task Description
The script does not handle brightness "0".
If you try to decrease brightness if it's already at 0, it produces errors:
~ # /usr/pandora/scripts/op_bright_down.sh
/usr/pandora/scripts/op_bright_down.sh: line 18: [: : integer expression expected
/usr/pandora/scripts/op_bright_down.sh: line 22: echo: write error: Invalid argument
Not sure how to attach a patch here, but you can get the change with:
git pull git://git.assembla.com/openpandora-oe.git bug-333
I also changed the script to use /bin/sh since it's a valid posix script. |
|
337 | Core | Bug Report | Low | SPAM | Closed | |
Task Description
SPAM |
|
99 | Core | Bug Report | Medium | After waking up from standby the system is not responsi ... | Closed | |
Task Description
If I resume after standby (moved the slider to the right), the pandora shows the desktop and I can move the mouse cursor but if I click something, nothing happens.
IRC suggested that the CPU might still be clocked at the standby low power speed. |
|
121 | Base OS | Bug Report | Medium | PyGame Hardware support | New | |
Task Description
PyGame is damn slow (games with scrolling are not at all playable).
Would be nice if Hardware surface could be used :) |
|
155 | Core | Bug Report | Medium | Critical problems after rescaling GLES2 X windows | Unconfirmed | |
Task Description
When a X window which is displaying GLES2 render output is:
- Either dragged out of the visibile screen region (?)
- Is made larger than it was at the creation time of the GLES2 context
then:
- The performance will drop significantly as the EGL buffer swaps won't occur as fast as before,
- The render output will be corrupted and flicker
- In rare occasions crashes the application or locks up the entire system (which forces you to remove the battery)
The problem can not be solved without restarting the application (Possibly forcing players to complete the same goals again as they were unable to reach a savepoint or similar things).
This was confirmed in Mupen64Plus and the PowerVR GLES Samples and some of my own projects (which are, however, based on the PowerVR samples).
As I didn't see any other reports about this problems (but had it confirmed by other Pandora users too) I would expect that it can be fixed by using a newer X, kernel or combination of them as other OMAP users would be effected too. |
|
158 | Base OS | Bug Report | Medium | Refresh rate and BPP | Unconfirmed | |
Task Description
On OS Zaxon (hotfix 3).
With "xfconf-query", the resolution is 800x480@60 Hz.
But with the tool in the menu "Settings" -> "Display", the resolution is 800x480@0 Hz.
With Java (opensdk-6-jre 6b18-1.8),
GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayModes()
return 1 display mode that is 800x480@0 Hz with a BPP of -1.
It seems to be the reason that GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayMode() return null
and when closing a java application that goes in fullscreen mode to throw an exception (invalid display mode). |
|
159 | Base OS | Bug Report | Medium | System > Run PND Application menu item does nothing | Unconfirmed | |
Task Description
With both Hotfix 3 and Hotfix 4 Beta the Run PND Application menu item fails to do anything.
Possibly related problem is that PND files newly copied to SD card are not recognized and entered on desktop as expected.
When you go to Thunar and right click - execute the PND file, nothing happens.
Possible fix by copying the PND to another folder on the SD card with Thunar.
This makes at least two PND files I had work.
Still no response with "Run PND Application" menu, though. |
|
190 | Core | Bug Report | Medium | Removing desktop-shortkeys does not work | Unconfirmed | |
Task Description
Try clearing shortcuts in Start->Settings->Window Manager->Keyboard. That doesn't work (for me).
This is a problem because these shortcuts are blocking key-combination in apps, like for example the keymapper in dosbox (CTRL+F1) or refreshing content (CTRL+F5). I tried manual editing or even deleting the configuration file, but changes are not recognized and the file recreated on reboot. |
|
204 | Core | Bug Report | Medium | fonts issues | Unconfirmed | |
Task Description
Ok, I just want to say that there is something missing about the font on the base image. I cant get what (at least for now)
Here is an issue : http://www.gp32x.com/board/index.php?/topic/54282-getting-vnc-viewer-to-work/
With my current Ogre build I get :
Warning: Unable to load any usable ISO8859 font
Error: Aborting: no font found
I've googled but so far no solution :( |
|
209 | Core | Feature Request | Medium | Shutdown after a full charge | Unconfirmed | |
Task Description
That still need to be configurable, but chris_c does a good job I'ld like to see integraded in the main image :
http://www.gp32x.com/board/index.php?/topic/58794-a-script-to-shutdown-after-charging/
and :
http://chrisc.bedroomcoders.co.uk/?p=77 |
|
210 | Core | Feature Request | Medium | Wader - cross platform graphical assistant for 3g conne... | Unconfirmed | |
Task Description
http://www.wader-project.org
http://trac.wader-project.org
http://trac.wader-project.org/wiki/Developers
this would be really usefull to monitor reception/network of mobile broadband dongle and it also counts ur mobile data usage (for those that have limits). |
|
225 | Core | Bug Report | Medium | ads7846 reports odd pressure values | Unconfirmed | |
Task Description
using evdev xorg drivers and not the tslib drivers you can receive pressure axis data however there is
a problem with the values reported by the ads7846 module and the evdev driver has no calibration property for pressure
using
xinput test touchscreen
you can see the pressure axis ranging from 120-ish for hard press to about 150-170 for light press (low pressure values can
be quite erratic)
I could possibly hack the evdev module to possibly do something with this odd and narrow range of values, but I rather think looking
at the source that the ads7846 module needs some work.
is there a git tag that has a known working configuration? as I've had problems getting the kernel to compile the last few times I attempted... |
|
242 | Application | Feature Request | Medium | Pressing SHIFT + any key in sequence creates the modifi... | Unconfirmed | |
Task Description
ISSUE ENVIRONMENT:
If you hold your Pandora in your hands, you only have your thumbs for typing, hence your typing abilities are quite limited.
It is hard to press more than 2 keys, and hard to press 2 keys on the same side, as your second thumb does not reach the opposite side all too easy (except you have a basketball player's hands).
The modifier keys Start/ALT Select/CTRL Pandora/(META, I guess?) are in the middle of the keyboard, hence the can easily pressed together with another key. But SHIFT lies at an ergonomically problematic side (left boundary). Hence hard to press with other left side keys.
SUGGESTED SOLUTION:
I suggest that Pandora OS offers an optional and configurable input help.
[1|2|3 presses | hold for duration x] SHIFT [timeout y] [modifier key 2] [timeout z] key
Produces the same result like SHIFT + modkey2 + key
Very likely modifier key 2 and timeout z are not necessary, as you can trigger the SHIFT hold (by your defined action), and then press the modifier key 2 and the other key at once, as the other modifier keys are laid at a central (ergonomically better) position. |
|
243 | Application | Feature Request | Medium | MiniMenu: Pressing successive character keys should com... | Unconfirmed | |
Task Description
Imagine this tab content:
Nubs, Pandora Input, PNDstore.
CURRENT BEHAVIOR:
Pressing "P" and "N" is succession jumps to "Nubs" eventually, as it first jumps to the first "P" item ("Pandora Input"), then to the first "N" item, "Nubs".
DESIRED BEHAVIOR:
That it acts like in most Linux file browsers or the Mac OS X Finder.
In detail: Pressing "P" and "N" within a certain time limit should combine them to the string "PN" and jump to the first item which starts with that string, i.e. "PNDStore". If no item matches, reduce the combination string by one character, try to match again, if that doesn't match, try matching again with one character less, ... , until only one character is left, and if that one doesn't match jump to the nearest previous lexicographical character, which matches. |
|
246 | Application | Bug Report | Medium | Clipboard content of closed app gets tossed instead of ... | Unconfirmed | |
Task Description
FLAWED BEHAVIOUR:
Copy and paste only works between 2 active applications. This is very limiting!
If you are in the single task oriented MiniMenu you have no chance at all to share the clipboard between apps!
If you are in the multi tasking oriented XFCE desktop environment you can only share between apps running in parallel! Not with apps which started after the source app has been terminated.
DESIRED BEHAVIOUR:
The clipboard content (within reasonable limits of course) should remain, regardless of the source application, so that you can paste at any later moment into any application. |
|
253 | Application | Feature Request | Medium | Switch GUI: Intelligent automatic choice | Unconfirmed | |
Task Description
If only 2 GUIs are available, skip the user selection and switch right into the only other GUI. What else would the user want?! Right!
If more than 2, already set the focus in the GUI list to the next possible item. |
|
257 | Core | Bug Report | Medium | TV Out script breaks XV/SDL Video playback | Unconfirmed | |
Task Description
This seems to be the case with Hot-fix 5 and 6 alpha 4.
I've been able to repeat this bug by re-flashing..
On a fresh re-flash.. installed community codec pack.. Videos will play fine on Panplayer, VLC and Gnome-Mplayer with default settings, which I believe is XV or SDL out in the case of VLC.
Run the TV-out script it will cause a blank black screen during playback.. Disabling TV-out, switching modes, rebooting.. battery out, nothing seems to allows it to work with XV/SDL out again.. I know If I switch to X11 it will make it "work" again, but I notice a bit of lag during playback using X11 compared to XV/SDL out. |
|
260 | Core | Bug Report | Medium | Low Power Mode: Input (keyboard, nub) still taken. Appl... | Unconfirmed | |
Task Description
This is the related documentation:
http://pandorawiki.org/Power_modes#Low_Power
(Please update accordingly as part of the issue resolution)
FROM MY USER EXPERIENCE:
If you put the Pandora into Low Power Mode, then press some keys, and then wake the Pandora back into Normal Mode, your input (both keys and nubs, haven't tried with USB input yet) seem to have triggered something while the device was in Low Power Mode!
What does really happen in Low Power Mode concerning execution and input?
a) Input is received AND triggers as application execution continues
or
b) Kernel/driver queues the input signals into a buffer, and executes them on wake?
If supposition a) or b) is true, then this would be one more reason to properly implement: FS#259
OBSERVANCE EXAMPLE 1:
1) Start MiniMenu. Mentally note down your active tab.
2) Put Pandora to Low Power Mode.
3) Press shoulder button R once.
4) Wake Pandora to Normal Mode. You are now one tab to the right of where you left. Input must have been caught in Low Power Mode, but wether execution of it happened while Low Power Mode or later after wake in Normal power Mode is unclear.
OBSERVANCE EXAMPLE 2:
1) Start gedit (a text editor). Insert the digit "1".
2) Put Pandora to Low Power Mode.
3) Press: CTRL-N 2 CTRL-N 3 CTRL-N 4. (Without the spaces)
4) Wake Pandora to Normal Mode.
5) For a fraction of a second you see the tabs building up. Either the input was really received AND executed while Low Power Mode and what you see is just a delayed window manager refreshment, or the input was queued in Low Power Mode, and only executed on wake. |
|
262 | Application | Bug Report | Medium | MiniMenu: 1) "Notes line" cannot be deleted. 2) Note li... | Unconfirmed | |
Task Description
Steps to reproduce the bug(s):
1) In MiniMenu select an arbitrary app.
2) Press SPACE to bring up the contextual menu.
3) Select "Edit notes line 1".
4) Insert your string and confirm.
5) Now at a later time you may decide to remove your note line again. Therefore you select the same app again in MiniMenu, then repeat steps 2-3, but this time:
a) Erase all characters so that you get an empty string and then confirm. RESULT: Your change is simply ignored! There should be a possibility within MiniMenu to remove/reset note lines, the simplest being to simply accept an empty string as an input, that's what an average user will try if s/he does not find a dedicated "Delete note line" command.
b) As a workaround I tried something and detected yet another bug! As I could not create an empty string, I simply created a note line only containing 1 SPACE character (=the string " ") and confirmed. This got accepted.
If MiniMenu is in detailed view mode (press the A-button or TAB in order to bring it up, if it is not already there) and you slide over an app whose note line is " ", MiniMenu crashes!
Maybe the bug is connected with the writing to / the parsing from the .OVR (override) files which MiniMenu creates for the affected files, as the separating value in OVR files seems to be TAB, and SPACE is also WHITESPACE, therefore some parsers probably skip/misinterpret this, and MiniMenu then catches an unexpected situation!
WORKAROUND: If you ran into the problem, that you cannot get rid of the note lines anymore, simply start a file browser of your choice, navigate to the location of the affected .PND file and find its sister .OVR (override) file and delete it or edit it accordingly! |
|
265 | Application | Bug Report | Medium | MiniMenu: Flawed tab display of sub-categories if they ... | Unconfirmed | |
Task Description
I assigned personal subcategories to some of my games.
Some of those subcategories share the same beginning string, i.e: Shooter, ShooterBallistic ShooterScoller.
MiniMenu displays those subcategories with flaws! See the ASCII screenshots below.
Note: The star symbols indicate the currently active selection.
The main category tab "Game" being active:
----------------------------------------------------------
| All | Audio | AudioVideo | Education |*Game*| Graphics |
----------------------------------------------------------
ActionGame AdventureGame ArcadeGame BlocksGame ...
Shooter ShooterBallistic ShooterScroller ...
GameA GameB GameC ...
----------------------------------------------------------
Now if I navigate into the sub-category "Shooter", everything normal:
----------------------------------------------------------
|*Shooter*|
----------------------------------------------------------
.. ShooterA ShooterB ShooterC ...
----------------------------------------------------------
But if I navigate to the sub-category "ShooterBallistic", strangely MiniMenu shows 2 tabs, "Shooter" and "ShooterBallistic", and jumps right into "Shooter".
----------------------------------------------------------
|*Shooter*| ShooterBallistic |
----------------------------------------------------------
.. ShooterA ShooterB ShooterC ...
----------------------------------------------------------
In order to reach my intended tab "ShooterBallistic" I need to navigate to it again. Annoying. There the contents are as expected:
----------------------------------------------------------
| Shooter |*ShooterBallistic*|
----------------------------------------------------------
.. ShooterBallisticA ShooterBallisticB ShooterBallisticC
----------------------------------------------------------
The flaw is the same for all other sub-categories beginning with "Shooter...". All have the flaw as shown in the example "ShooterBallistic", only that it is themselves instead of "ShooterBallistic". One more example to be perfectly clear:
----------------------------------------------------------
| Shooter |*ShooterScroller*|
----------------------------------------------------------
.. ShooterScrollerA ShooterScrollerB ShooterScrollerC
---------------------------------------------------------- |
|
290 | Core | Bug Report | Medium | gnome-mount not available | Unconfirmed | |
Task Description
In GTK applications, such as Truecrypt, NoteCase Pro or Mousepad, the file open / file save dialogs have shortcuts to mounted file systems on the left side.
If clicking such a shortcut entry, the corresponding file system's contents are shown in the right dialog pane.
This works for file systems, which were available at boot time.
For file systems mounted after booting, e.g. by inserting an SD card or connecting a USB drive, when clicking such an entry, an error message appears saying
"Could not mount [volumen name]
Failed to execute child process 'gnome-mount' (No such file or directory)"
This is healed by
sudo opkg install gnome-mount
(which instals gnome-mount, nautilus, gvfsd-ftp, gvfs (upgrade), and a lot of libs (upgrades)..
This has been seen in SuperZaxxon release 1.5, not in Beta3 (but Beta3 is the only choice in Flyspray's dropdown currently).
I reported that error for HF6 I think, and it seemed to be fixed in SuperZaxxon Beta5. A regression? |
|
291 | Core | Bug Report | Medium | root-owned pndrun_...out file makes PND refuse starting | Assigned | |
Task Description
If a PND has been run as root before (using pnd_run.sh from a root shell) and afterwards it is invoked the normal way, the PND doesn't start, because the .out file cannt be overwritten:
/usr/pandora/scripts/pnd_run.sh: line 26: /tmp/pndrun_firefox.out: Permission denied
Desired solution:
.out file is silently overwitten.
Maybe, if that's not possible, create another .out file with a different name (added counter, for example).
Seen in SuperZaxxon relese 1.5, not in Beta3 as this task is flagged, but there is no choice besides Beta3. |
|
301 | Core | Bug Report | Medium | Missing X keybinding for colon symbol | Unconfirmed | |
Task Description
As verified with xev, an attached bluetooth keyboard can not generate colon (shift semicolon). xmodmap shows that (unlike a standard Linux system) shift-semicolon is mapped to NoSymbol. While it's find that there's a special symbol to get semicolon on the built-in keyboard, the other binding really should be there in support of attached keyboards. |
|
307 | Core | Feature Request | Medium | Change how Automatic Shutdown works | Unconfirmed | |
Task Description
When thee Pandora is shutting down because its almost out of power, it should check to make sure that the nub inputs are set to the default mode (which is mouse movement for the left nub and mouse buttons for the right nub). If not, it should change them to be like that. |
|
315 | Core | Bug Report | Medium | Pairing bluetooth SPP devices doesn't work with XFCE | Unconfirmed | |
Task Description
Hi, sadly the XFCE bluetooth manager seems to have problems with pairing simple SPP devices (an BT GPS mouse here).
1. Enable BT
2. BT Manager -> Add new device
3. Confirm Dialog and wait for scanning
4. Pick device
5. Select PIN options -> "0000" (here for me)
In next step the dialog still asks you to enter a random PIN at your BT device (which is impossible here).
Thus it seems, that the XFCE dialog makes troubles, I tried it with 2 different GPS. Pairing the GPS manually works fine:
sudo rfcomm connect rfcomm0 00:18:E4:26:5F:14 |
|
331 | Core | Bug Report | Medium | Hold switch key continuously sends X11 KeyPress events ... | Unconfirmed | |
Task Description
When put into Hold mode, X11 handles the power switch as if it's being pressed, and it generates lots of keypress events, passing them to the foreground application. Since /dev/input/eventX does not seem to continuously trigger, I'm guessing it's due to key repeat.
To reproduce:
- Install xev and open it in the terminal
- Put the power key in HOLD mode
- Notice the "time" value changing rapidly
In addition to causing more work to X, it also floods the active application with key presses, resulting in increased CPU usage. In my test, switching to HOLD while Firefox is in the foreground causes it to use 6% CPU and X an additional 2.5%.
In addition, the key-press events continue even after the switch is taken off HOLD until another key is pressed.
A possible solution to this is to blacklist the power-button event device, to prevent evdev from listening to it (the key is handled by pndevmapperd). |
|
336 | Core | Bug Report | Medium | Touch screen sensitivity too low | Unconfirmed | |
Task Description
The touch screen requires to be used with the stylus or another sharp object. Even if I need to click a desktop icon, and could as well use my finger, the touch screen won't react to my finger at all (even if pressed quite hard). |
|
250 | Application | Feature Request | Medium | File Browser Thunar - Trashing file crosses filesystem ... | Researching | |
Task Description
Trashing a file/folder seems to MOVE it to a certain trash directory on the MAIN VOLUME, rather then the ORIGINATING VOLUME, hence this can result in a COPY RATHER THAN A MOVE operation, if the trashed file originates from a filesystem other than the main filesystem!
This is very inefficient and faulty as it is:
a) Very time consuming
b) And in case of large files this operation can even fail due to not enough free space on the main volume. |
|
6 | Core | Bug Report | Medium | Calibrate Touchscreen within the Settings-Menu of XFCE ... | Closed | |
Task Description
It doesn't run. |
|
15 | Core | Bug Report | Medium | Permissions / automounted SD Card | Closed | |
Task Description
Only root has write access to automounted SD Cards. The normal user can only read. |
|
16 | Core | Bug Report | Medium | normal user login fails over serial/ttys | Closed | |
Task Description
Only root can login over serial or ttys, and only if it has no password. Ssh login works fine.
After some debugging it seems to be PAM issue, possibly recipes/shadow/ misconfiguration in OE. Maybe we sould use IMAGE_LOGIN_MANAGER = "busybox" instead of IMAGE_LOGIN_MANAGER = "shadow" as we don't need super security? |
