|
213 | Application | Bug Report | Low | Gigolo does not perform it's task | Closed | |
Task Description
In it's current state, Gigolo is flat out broken and (almost) useless. It pretends to to it's job, but can't because it's missing critical pieces of anatomy.
It can mount local filesystems correctly, but then so can thunar, so this is a redundant and useless function. The main reason to use Gigolo is to mount remote filesystems easily, and without having to use the terminal, and to save passwords in your keychain.
The solution to the problem is to perform the following tasks:
sudo opkg install gvfsd-sftp sshfs-fuse
sudo mousepad /etc/modutils/fuse
type "fuse" save and quit
sudo update-modules |
|
220 | Core | Feature Request | Low | Please include /usr/bin/xkbset | Closed | |
Task Description
One of the first things after installing HF5 was downloading xkbset, because it is necessary for proper L-R buttons mapping as mouse buttons. Could you please include that in the system?
I am using urjaman's executable from here:
http://www.gp32x.com/board/index.php?/topic/55124-remapping-the-mouse-buttons-etc/page__st__15__p__896576&#entry896576
Even better would be a GUI that allows mapping of L-R buttons for mouse, just like GUI for nubs :) But including xkbset will be already good. |
|
224 | Core | Bug Report | Low | Unresponsive start menu since HF5 | Closed | |
Task Description
Since hotfix 5, the start menu often pauses for a few seconds, not letting me select anything or move the mouse.
Other people have reported the issue as well:
http://boards.openpandora.org/index.php?/topic/2295-is-the-xfce-menu-trolling-anyone-else/page__gopid__42559#entry42559 |
|
228 | Core | Bug Report | Low | libpnd must be linked to libstdc++ | Closed | |
Task Description
Run "ldd -r /usr/lib/libpnd.so.1", and a number of undefined symbols are listed. These become a problem when attempting to load libpnd in Python. I imagine it could be a problem when attempting to load libpnd in other languages as well.
This can be worked around with "LD_PRELOAD=/usr/lib/libstdc++.so" before running a Python program that loads libpnd.
But it can be worked around more easily by linking libstdc++ during compile. Adding "-lstdc++" to line 41 of libpnd's Makefile does it. I'd add a patch, but the attach file button isn't working for me. Still, a simple fix, right? |
|
230 | Core | Bug Report | Low | Second SD slot not working in future kernel version 2.6 ... | Closed | |
Task Description
Sorry, not sure where to log this bug. I have confirmed with aTc on freenode, that SD slot #2 does not work on kernel version 2.6.37 from the openpandora git.
Happy to test anything and reports results. |
|
231 | Core | Bug Report | Low | Touchscreen not accurate on the edges - Calibration doe ... | Closed | |
Task Description
The touchscreen is accurate in the middle of the screen but precision is off by one or more mm near the edges of the screen. Recalibrating and rebooting does not help.
Seems like this is just a permission problem - tslib saves calibration data to /etc/pointercal which is noch writeable for the regular user.
Changing permission on that file to 666 solves this, but i guess starting the calibration tool with root permission (gksu?) would be a better solution. |
|
232 | Core | Bug Report | Low | HF6 - charged completed with lid closed causing keyboar ... | Closed | |
Task Description
HF6 - It seems as when charging finishes with pandora on then charge light goes out (charge completed assuming) keyboard not functioning just gamepad. Can't use letters to cycle through in mini minimenu or use space to pull up ovr settings.
Will test further |
|
235 | Core | Bug Report | Low | File /tmp/currentuser cannot be deleted by other users | Closed | |
Task Description
The system creates a file /tmp/currentuser at the first login of a user. After logging out and in as another user the file still contains the previous user name. An cannot be deleted/overwritten by the new user.
Steps To Reproduce:
At least two users are available and have XFCE GUI enabled.
1. Login as user (eg. guest), a file /tmp/currentuser is created (containing guest)
2. Log out
3. Log in as another user (eg. jgeiss), the file still contains the old name
4. Change GUI to PMenu
5. Log out
6. Log in as first user (guest)
Now the first user (guest) has PMenu as GUI which was set by the second user (jgeiss).
Maybe the permission should be 0666 for this file? |
|
241 | Application | Feature Request | Low | MiniMenu shall remember state for next start | Closed | |
Task Description
With the setting "Live (not exit) on app run?" set to "NO" the currently selected tab and item shall be remembered, so that you return to the same state, in which you left MiniMenu. |
|
247 | Core | Bug Report | Low | pnd_make.sh can't handle PND with spaces in the path | Closed | |
Task Description
pnd_make.sh can't handle PND with spaces in the path. For example, if the label of the volume where the PND is saved, has spacebars.
The Problem is line 655:
655: PND=$(readlink -f $PND)
Bash handles a path with spacebars as two seperate arguments for the readlink command.
The problem is, that i don't know a solution for this problem. |
|
264 | Core | Bug Report | Low | Issues with HOTFIX 6 R1 Beta | Closed | |
Task Description
I started with hotfix 5 and when I used the Left Nub for mouse movement it performed well.
I installed HOTFIX 6 R1 Beta and the Nub works fine except pushing up. It moves the cursor very slow and all other directions just fine. The other nub works just fine as well.
This only began after I installed HF6R1B.
I also had to install the Hotfix twice due to sustained system freeze upon start up on the first attempt.
I enabled gui choice but minimenu does not function it just cycles back to GUI choice. |
|
266 | Application | Bug Report | Low | hf6rc: Unable to enter Low Power Mode with lid shut: | Closed | |
Task Description
Since hf6rc was installed I am unable to enter low power mode.
I did pull up the new lid config settings script and selected switch off screen.
Reproducable.
Nothing happens when the power switch is moved fully to the right for a short time.
I expect it to entry low power mode. quirky for it not too.
workaround: easy - enter LPM before closing lid.
btw: unable to select hf6 in reported version. |
|
268 | Core | Bug Report | Low | HF6: error in op_power.sh | Closed | |
Task Description
When powering the system off after it has been in low power state once, an error is reported by op_power.sh, line 173.
Unfortunately I don't have the full message as it's visible on the console only for a short time before the screen turns off.
From looking at the script, the "fi" in the last line might be superfluous. |
|
275 | Core | Feature Request | Low | User should be a member of the cdrom group | Closed | |
Task Description
These permissions are needed for CD/DVD burning/player apps.
From bdc88595d8af726b3bf4745ece310f92299d8759 Mon Sep 17 00:00:00 2001
From: Paul Dersey
Date: Sun, 19 Feb 2012 17:22:41 -0500
Subject: [PATCH] pandora-first-run-wizard: add user to cdrom group
---
recipes/pandora-system/pandora-first-run-wizard.bb | 2 +-
.../pandora-first-run-wizard/first-run-wizard.sh | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/recipes/pandora-system/pandora-first-run-wizard.bb b/recipes/pandora-system/pandora-first-run-wizard.bb
index 904dc4a..a63dc0c 100755
--- a/recipes/pandora-system/pandora-first-run-wizard.bb
+++ b/recipes/pandora-system/pandora-first-run-wizard.bb
@@ -6,7 +6,7 @@ RDEPENDS = "hsetroot zenity dbus pandora-wallpaper-official tslib tslib-calibrat
COMPATIBLE_MACHINE = "omap3-pandora"
-PR = "r28"
+PR = "r29"
SRC_URI = " \
file://first-run-wizard.sh \
diff --git a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
index a801e3f..f30b80e 100755
--- a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
+++ b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
@@ -88,7 +88,7 @@ while ! username=$(zenity --title="Enter your username" --entry --text "Please c
zenity --title="Error" --error --text="Please try again." --timeout 6
done
-while ! useradd -c "$name,,," -G adm,audio,video,netdev,wheel,plugdev,users "$username" ; do
+while ! useradd -c "$name,,," -G adm,audio,cdrom,netdev,plugdev,users,video,wheel "$username" ; do
username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
done
--
1.7.8.3 |
|
276 | Core | Feature Request | Low | Kernel 3.2.x: add script to activate zram | Closed | |
Task Description
Please add a script to activate zram (RAM compression) when using the new kernel. More info about how to do this is available in this post:
http://boards.openpandora.org/index.php?/topic/7844-superzaxxon-beta-3-released/#entry138834
http://boards.openpandora.org/index.php?/topic/7226-superzaxxon-beta-11-released/page__st__20#entry128665
Please be aware though that Linux-SWAT had to explicitly set a value in "/sys/block/zram0/disksize" to get it work with Slackware. Over here the following is automatically set:
pandora:~$ cat /sys/block/zram0/disksize
61648896
Sadly I can *not* change this value, even using sudo:
pandora:~$ ls -l /sys/block/zram0/disksize
-rw-r--r-- 1 root root 4096 Apr 9 12:51 /sys/block/zram0/disksize
pandora:~$ cat /sys/block/zram0/disksize
61648896
pandora:~$ sudo echo 61648888 > /sys/block/zram0/disksize
-bash: /sys/block/zram0/disksize: Permission denied
Basically the following commands are required in a startup script to automatically create the "compressed swap inside RAM" aka zram (possibly a check if the modprobe was successful makes sense as well as checking for the size of the created ramdisk):
modprobe zram
mkswap /dev/zram0
swapon -p 5 /dev/zram0 |
|
278 | Core | Bug Report | Low | Kernel 3.2.x: broken middle click on right nub | Closed | |
Task Description
Using kernel 3.2.x middle click with the right nub is no longer working. With the "old" kernel you get a middle click when pushing the right nub down, this is no longer the case when eg using SuperZaxxon Beta3 (was already the case in SuperZaxxon Beta1 with kernel 3.2.1). As long as you are using kernel 2.6.27.x middle click is working as expected. |
|
294 | Core | Bug Report | Low | Left nub not working with kernel 3.2 | Closed | |
Task Description
Left nub doesnt work when powering on into SuperZaxxon Final with kernel 3.2.
Rebooting into kernel 2.6 fixes it until sleeping or powering off. After which rebooting into 2.6 is once again necessary to get the left nub working. |
|
298 | Application | Bug Report | Low | Mousepad only searches once | Closed | |
Task Description
Whenever I search text in an open Mouspad document, it works fine the first time. As soon as I close the search dialogue and re-open it, the "find" (resp "find and replace" in replace dialogue) button is greyed out and unclickable. (This is the state the dialogue is in before typing anything, but this time, typing doesn't help.) "return" also doesn't work. Only help is closing and reopening Mousepad. |
|
302 | Core | Bug Report | Low | Correct keymap not available during login process | Closed | |
Task Description
The correct keymap, as matching the characters printed on the keys, is available when running the First Boot Wizard, but not during login.
This means that special characters like ! ( ) and so on, which you enter via Fn-[2nd key] cannot currently be used in a username nor password.
My first experience with my Pandora was therefore that I had to reflash the OS due to this as I had locked myself out because I used a special character in my first chosen password.
Also reported here:
http://boards.openpandora.org/index.php?/topic/10112-question-mark/#entry188179 |
|
303 | Core | Bug Report | Low | pppd 2.4.3 has a bug, recommend upgrade to ppp 2.4.5 | Closed | |
Task Description
pppd 2.4.3 doesnt auto reconnect (in my setup) even if configured to do so (persist). Found a ppp bug report confirming this ( http://ppp.samba.org/cgi-bin/ppp-bugs/resolved?id=1110;user=guest - "ppp-2.4.3 / pppoe not reconnecting") and that it has been fixed. I compiled pppd 2.4.5 and that reconnects just fine. |
|
304 | Core | Bug Report | Low | bluetooth serial port sleep causes lost / frozen connec ... | Closed | |
Task Description
I experienced (reliably) 3 times that if I had an idle ppp/rfcomm connection to my phone, it would eventually freeze so that the phone reported no active bluetooth connection and the pandora ppp would still think that the connection is active, but no data would flow. Killing pppd and re-trying would fail opening of the rfcomm link with "Host is down".
Disabling & enabling bluetooth "fixed" this so that pppd worked again (so it is not the phone that was "down").
Adding these lines to op_bluetooth_work.sh (apparently atleast) fixed it for me:
add between lines 14-15:
echo 0 > /sys/devices/platform/omap_uart.0/sleep_timeout
(or at any place during enable for that matter)
And to disable (before exit 0, line 30) to save power when bluetooth is off and restore normal settings:
echo 10 > /sys/devices/platform/omap_uart.0/sleep_timeout
I remember mentioning this way back when I last tested bluetooth, but got a reply that this should not be needed because we have flow control between the bt chip and pandora. But if a sleeping serial port loses a character when somebody sends a burst to it, what could flow control do? If it reported not ready to receive, the character would never be sent (and things would freeze...). If it reports ready to receive (what I think it does) the character will be lost. One would need to periodically disable the serial port sleep (and enable ready to receive) for a moment to check for pending data, but I think this would use more power than keeping the serial port active and/or possibly cause way too big delays.
I'm not really certain of this thing (whether this is a workaround, hack or a real fix... and whether my interpretation of what is happening is correct - i have no real proof), but I think that reporting what I've found is better than not. (And am I the only user of bluetooth with an old phone for internet (ppp+rfcomm, not pan)? ...) |
|
305 | Core | Bug Report | Low | [PATCH] bluetooth startup doesnt restore enabled state | Closed | |
Task Description
op_bluetooth.sh doesnt remember to call op_bluetooth_work.sh in the startup case. Patch inlined here (maybe broken, but for fast reading) and behind link: http://urjaman.dyndns.info/bluetooth-startup-fix.patch
--- op_bluetooth.sh.org 2012-11-24 01:54:53.000000000 +0000
+++ op_bluetooth.sh 2012-11-24 02:06:51.000000000 +0000
@@ -7,8 +7,13 @@
cd "$HOME"
if [ "$1" = "startup" ]; then
- [ -f "$LOCK" ] && sudo /usr/sbin/hciconfig "$INTERFACE" up pscan 1>/dev/null && sudo /usr/sbin/bluetoothd || echo "Bluetooth: User has not enabled Bluetooth."
-
+ if [ -f "$LOCK" ]; then
+ sudo /usr/pandora/scripts/op_bluetooth_work.sh 1
+ INTERFACE="`hciconfig | grep "^hci" | cut -d ':' -f 1`"
+ sudo /usr/sbin/hciconfig "$INTERFACE" up pscan 1>/dev/null && sudo /usr/sbin/bluetoothd
+ else
+ echo "Bluetooth: User has not enabled Bluetooth."
+ fi
else
# Figure out if Bluetooth is running or not |
|
306 | Core | Bug Report | Low | Issue with Network Notification pop-ups | Closed | |
Task Description
Clicking on the button in a notification used when WiFi is enabled (such as the one stating that Wireless Networks were found), doesn't close the notification. In order to close it, I have to click the X button that's in the top-left. |
|
312 | Core | Bug Report | Low | Special character in password | Closed | |
Task Description
problem:
setting a username and password using first setup wizzard it's possible to set special character like @#*%/ ect...
the login manager don't support this characters, so you need to reset the device.
possible solution:
1. disable the possibility of setting special characters.
2. implement special characters in login manager. |
|
313 | Core | Bug Report | Low | WiFi LED Not Triggered on First Activation | Closed | |
Task Description
The first time WiFi is enabled after boot, using either the the config button menu or the Toggle WiFi menu option the WiFi LED does not light up. (though the WiFi itself does work)
Once it has been enabled and disabled for the first time, it will work normally for subsequent uses of the WiFi toggle.
If the Toggle WiFi script is launched for the first time from the terminal the LED does light up.
This is the case in SuperZaxxon 1.53 with all current upgrades applied, and reportedly since the introduction of SuperZaxxon.
checking /sys/class/leds/pandora::wifi/trigger while the WiFi is enabled but the LED off shows that the trigger has been successfully set to phy0radio
Also noted while investigating this:
If Wifi is enabled for the first time from the terminal the following errors are generated by /etc/init.d/wl1251-init
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
Usage: insmod filename [args]
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
find: /lib/modules/3.2.30/updates: No such file or directory
Usage: insmod filename [args]
The commands that generate these errors are only executed if the mac80211 module is not already loaded - and that module is not unloaded when wifi is disabled. This seems to be unrelated to the issue being reported, however I can't see any cause for the issue at all, so I figured it was worth including it in the report anyway. |
|
314 | Core | Bug Report | Low | Pandora-Button doesn't open XFCE menu | Closed | |
Task Description
If you enable the "disapear automaticaly" feature in the XFCE panel, the Pandora button doesn't open the main menu anymore and you need to open it manually with the cursor. |
|
321 | Core | Feature Request | Low | Support overriding all category fields with .ovr | Closed | |
Task Description
Currently only the main category and the first sub category of the main category can be overridden using a .ovr file while libpnd uses additional PXML supplied category date to construct the desktop file. This makes it difficult to work with PNDs that supply unwanted data in these additional fields. |
|
322 | Core | Bug Report | Low | Allow removal of categories using the libpnd category c ... | Closed | |
Task Description
Since some PNDs provide nonstandard categories like GTK or GNOME, it is desirable to extend the libpnd category mapping with the ability to suppress individual categories completely. |
|
334 | Core | Bug Report | Low | op_bright_down.sh: error when decreasing brightness | Closed | |
Task Description
The script does not handle brightness "0".
If you try to decrease brightness if it's already at 0, it produces errors:
~ # /usr/pandora/scripts/op_bright_down.sh
/usr/pandora/scripts/op_bright_down.sh: line 18: [: : integer expression expected
/usr/pandora/scripts/op_bright_down.sh: line 22: echo: write error: Invalid argument
Not sure how to attach a patch here, but you can get the change with:
git pull git://git.assembla.com/openpandora-oe.git bug-333
I also changed the script to use /bin/sh since it's a valid posix script. |
|
337 | Core | Bug Report | Low | SPAM | Closed | |
Task Description
SPAM |
|
227 | Core | Bug Report | Low | Delete button won't delete, and function lock doesn't w... | Unconfirmed | |
Task Description
If you hit the function button, then hit it again to lock the function keys, it doesn't lock the function key.
The delete key, hold shift and hit the back space button, it won't delete, meaning it won't remove the character to the right of the cursor. I saw this on the forum, and confirmed it on my pandora also. |
|
216 | Application | To Do (Reminder) | Low | ToDo - SD manager tool (backup homedir/restore, prepare... | New | |
Task Description
Should make up a simple zenity script tool ..
- backup -> pick SD -> backs up current user's homedor to SD. (tar.gz format so permissions can be kept; not cpio/etc, too annoying for user.) -> keep rolling, or just one copy?
- restore -> pick SD -> pick user -> confirm -> wipe home and restore with version from tarball? (or just unpack in-place, so existing new files are kept)
-> prepare SD -> pick SD -> mkdir /pandora/menu and /pandora/desktop |
|
12 | Core | To Do (Reminder) | Low | file association for .pnd | New | |
Task Description
Build the xml file and defaults.list so that pnd_run is file-assocated to .pnd |
|
94 | Core | Bug Report | Low | Backlight control by lid sensor not detected after boot | New | |
Task Description
If you boot the system with the lid closed, the backlight will still be on when you get to the desktop. You have to lift the lid for an instant and then close again to shut it off. Perhaps this is because of the lack of trigger for an interrupt since the sensor is already activated. Can there be one extra check of the lid sensor after boot to cover this static position? |
|
104 | Base OS | Bug Report | Low | AAC decoder libfaad doesn't appear to be compiled as fi... | Unconfirmed | |
Task Description
FAAD2 appears to not be compiled with fixed point decoding. My version of libfaad compiled with fixed point used 2-3x less cpu than the provided one. It's not enough to provide the switch to the configure script. the file libfaad/common.h has to be edited and a define uncommented. Line 68 in the v2.7 source.
/* COMPILE TIME DEFINITIONS */
/* use double precision */
/* #define USE_DOUBLE_PRECISION */
/* use fixed point reals */
//#define FIXED_POINT |
|
118 | Base OS | Feature Request | Low | add sdl-perl to the base OS | Unconfirmed | |
Task Description
Hi there,
Many games depend on sdl-perl. Perl and sdl are part of the base OS, but not not the connection between the two.
Cheers,
sebt3 |
|
123 | Base OS | Feature Request | Low | Suggestions for the Pandora-Button | New | |
Task Description
My suggestion instead of a full menu, would be to have a tiny overlay over the current running application which allows you to:
- relogin (to close all running applications)
- quit (stop the active application)
- shows the last notifications / toaster messages which you missed while being in a fullscreen app.
- possibly even something like plugin support or icons to check out the wifi-strength etc. from fullscreen apps.
Implementation wise this could possibly be done using
- a topmost window and the same content rendered in screenspace in a GLES hook (which should draw over most applications)
or
- one of the DSS2 overlays maybe
It's definitely something to consider as it was requested on the forums a few times (~"xbox like menu in games"). |
|
124 | Base OS | Bug Report | Low | ifup doesn't like dhclient | Unconfirmed | |
Task Description
I added:
iface usb0 inet dhcp
And ran:
ifup usb0
But dhclient simply prints usage. |
|
135 | Application | Bug Report | Low | OOM Killer causes loss of items in xfce4-panel configur... | Unconfirmed | |
Task Description
When the Pandora runs out of memory and the Out-Of-Memory killer fires, the Applications/Settings/xfce4/panel/panels.xml loses the entries for the menu button and the power monitor. |
|
138 | Core | Bug Report | Low | 'del' key (shift+backspace) not working | New | |
Task Description
The title says everything: The 'del' key does not work. In theory you should have a del "event" when hitting shift+backspace. This is not the case in all progs I tested so far (terminal and default text editor with gui). |
|
148 | Core | Bug Report | Low | add standard library path to ldconfig.so.conf to help l... | Unconfirmed | |
Task Description
cat >/etc/ld.so.conf |
|
178 | Core | Bug Report | Low | Mount-loop when booting from SD-card | Unconfirmed | |
Task Description
When booting the pandora-OS from sd-card by using the official tar, you will end up with your sd-card being mounted twice: once as / and once as /media/. I solved this by adding "/dev/mmcblk0" to "/etc/udev/mount.blacklist". Maybe this should be added to the default tarball? I'm not sure as it might be used in other ways maybe (beside SD-card-installation)?
Background: I ran "updatedb" as root and have been notified by a message that there was a mount-loop. After adding the above modification the system still booted fine and "updatedb" ran nicely without a warning. |
|
179 | Core | Bug Report | Low | .vimrc-preset for user but not for root | Unconfirmed | |
Task Description
I am running PandoraOS from sd-card installed with the official tarball "pandora-rootfs.tar.bz2".
I noticed that the control/keyboard-mapping in vi does not work correctly after switching to root (for example sudo su-). I solved this by copying over my users .vimrc to root-homedir. This should already be included in the tarball. |
|
185 | Core | Bug Report | Low | Xorg driver should not be dependant on user environment | Unconfirmed | |
Task Description
The patch implementing screen blanking uses the /usr/pandora/scripts/op_lid.sh script to control LCD backlit:
http://git.openpandora.org/cgi-bin/gitweb.cgi?p=openembedded.git;a=blob;f=recipes/xorg-driver/xf86-video-omapfb/pandora_backlight_dim.patch;h=4a0b8432d083c6e7297192a2920c7a777ae3d098;hb=16f3fff44323bd6b4349d909667b51a2fef3f278
The same result can be achieved by using the sys interface:
/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/bl_power
This approach makes driver independent on particular distribution. The proposed patch is attached. |
|
217 | Application | Feature Request | Low | Add Mounting and unmounting context options for PND's | Unconfirmed | |
Task Description
It'll have to be in the SKEL.
/etc/skel/Applications/Settings/Thunar/uca.xml
People can replace the contents of their current uca.xml file with the following to gain this functionality now.
/home/[USERNAME]/Applications/Settings/Thunar/uca.xml
Terminal
Open Terminal Here
exo-open --working-directory %f --launch TerminalEmulator
Example for a custom action
*
emblem-symbolic-link
Mount PND
/usr/pandora/scripts/pnd_run.sh -p %f -m && thunar /mnt/utmp/
*.pnd;*.PND
gtk-jump-to-rtl
Unmount PND
/usr/pandora/scripts/pnd_run.sh -p %f -u
*.pnd;*.PND |
|
222 | Application | Bug Report | Low | Login Screen does not accept all symbols of the form Fn... | Unconfirmed | |
Task Description
Problem - Login Screen does not accept all symbols of the form Fn+char
Reproducibility - always
Actual results - the characters :?#|$€"‘£¥@!_ do not work on the Login Screen with the Pandora's keyboard. When fn then the corresponding character is pressed, nothing is added to the string.
Expected results - these characters should appear just like any other character
Work Around - an external keyboard was able to enter these characters
Aditional Information - While the characters :?#|$€"‘£¥@!_ do not work, the characters ;/\'-+=`() work just fine. |
|
236 | Core | Bug Report | Low | Cannot unmount SD-Card | Unconfirmed | |
Task Description
SD-Card in Pandora can only be unmounted by guest (uid=1000) but not by jgeiss (uid=1001).
Steps To Reproduce:
Insert SD-Card (or boot with SD-Card inserted),
Login as jgeiss (uid=1001),
Try to unmount SD-Card via XFCE-Popup-Menu (right mouse click on SD-Card-Icon and select unmount). |
|
238 | Application | Feature Request | Low | Quick key access to OK in dialogues | Unconfirmed | |
Task Description
PROBLEM DESCRIPTION: In many GUI dialogues the default action button (OK, ACCEPT, YES, …) cannot be triggered with a simple key press. Pressing ENTER triggers the element which has focus (usually the first dialogue element), but not the default action, as most computer users would expect!
MY WORKAROUND MEANWHILE: Press ALT plus the underlined letter of your desired action. But that's not very convenient as the underlined letter needs to be looked upon first, as the button label can differ from situation to situation (ACCEPT, OK, YES, …) and then 2 keys need to be pressed.
SUGGESTED SOLUTION: The custom of many operating systems should be adapted on the OpenPandora as well. SPACE triggers the currently focused element (whatever that may be: list item, radio button, checkbox, etc), and ENTER triggers the default action of that dialogue.
Or even better use the Pandora specific A/B/Y/X keys cleverly in those dialogues/selections. I don't know whether there is a standard functionality assignment within this key-group, in MiniMenu "B" is start/confirm, I do not know of any other standard assignments yet. |
|
239 | Application | Feature Request | Low | MiniMenu: New option: Grid stop horizontal | Unconfirmed | |
Task Description
I am suggesting the new option "Grid stop horizontal" for MiniMenu with the following possible settings and their effect.
Yes -> If the boundary is reached the focus remains there.
No -> If the boundary is reached the focus starts at the opposite side again.
Jump to next/prev line -> If the boundary is reached the focus jumps to the next/previous line and the opposite side. |
|
240 | Application | Feature Request | Low | MiniMenu shall return into full screen mode (more quick... | Unconfirmed | |
Task Description
If you set MiniMenu's option "Live (not exit) on app run?" to YES, and you quit an application and return to the still running MiniMenu, it runs in windowed mode, and takes about 2 seconds until it goes into full screen mode again.
This delay should at best be not noticeable at all, at most 0-1 seconds. |
