|
150 | Core | Bug Report | Low | pndnotifyd Segfault | Closed | |
Task Description
Might be related to http://bugs.openpandora.org/index.php?do=details&task_id=128
as it have exactly the same behaviours.
But this time no translation is involved (masked in my script until this is fixed).
And making the file smaller (by removing apps :( ) managed to let it alive, so it seam to be file size related. |
|
149 | Base OS | Bug Report | Very Low | Resets if Battery is removed - but power is still pluge ... | Closed | |
Task Description
The Pandora resets if the battery is removed - even though its plugged to the AC Adapter.
the power disapears for a second, and then the pandora notices that the power cable is actually plugged in, and immediately starts the pandora again |
|
147 | Base OS | Bug Report | Low | Screen backlight is ON when starting with lid closed | Closed | |
Task Description
[HotFix3 installed]
If you power up the Pandora and have the screen closed, the backlight will still go on. That should not happen. Right now you have to open it, close it and than the backlight turns off to save energy... |
|
146 | Base OS | Bug Report | High | Minimenu regressions with Hotfix 3 | Closed | |
Task Description
Fresh firmware install with Hotfix 3 installed results in the following issues with Minimenu.
1. 25+% cpu usage versus ~5% in earlier versions.
2. Touchscreen no longer works correctly to select icons. Selecting tabs still works and occasionally it will work for selecting an application icon, but for the most part it simply does nothing. |
|
145 | Base OS | Feature Request | Low | missing tune2fs command | Closed | |
Task Description
bash: tune2fs: command not found
Please include tune2fs into basic OS image. Would be handy for managing filesystem on SD cards. |
|
144 | Core | Bug Report | Low | Wifi LED does not always get re-activated after enablin ... | Closed | |
Task Description
Wifi LED does not always get re-activated after enabling wifi.
It seems that the led trigger which ought to be set to [phy0dadio] no longer exists and the phy# seems to increment (up to at least 11 I have observed)
If I set the trigger to phy##radio then the notification works again, but I'm not sure of the best way to fix this. I suppose a quick hack to the wl1251-init script is the place to start. |
|
143 | Core | Bug Report | Low | LED triggers timer and heartbeat cause freezing when us ... | Closed | |
Task Description
Summary is about all i can dug out now. Somehow related to the PWM driving, because SD, bt and wifi leds work with trigger=timer.
NOTE: power and charger leds are driven by PWM (just so you all know what I'm talking about).
All i wanted to do was to add blinking power led to low power mode and all i get is a frozen pandora :/. |
|
142 | Core | Feature Request | Medium | Visible Sleep Indicator | Closed | |
Task Description
Could we please get a visual indication that the Pandora is in sleep/low-power mode? I would suggest one of the case LEDs either turn on or blink to indicate the sleep mode. |
|
141 | Base OS | Bug Report | High | When using an unlabeled SD card, Hotfix3 final can't un ... | Closed | |
Task Description
I had beta 1 of hotfix 3, and there turning the pandora into a cardreader worked fine for that card. However, I just installed the latest hotfix 3 final, but that one fails to unmount. Attached is the pndrunop_storage.out. Apparently something's going wrong with the splitting of the partition name, as it tries to unmount /dev/mmcblk0 instead of /dev/mmcblk0p1
Manually unmounting it by using sudo umount /dev/mmcblk0p1 does work, but then I can't use the tool because that apparently only lists mounted memorycards. |
|
140 | Core | Bug Report | High | WiFi Starts off fast then slows down | Closed | |
Task Description
When downloading files using a browser or wget or when attempting to stream videos we see a fast initial burst which then slows down dramatically.
see following topics for more details and actual user stats.
http://www.gp32x.com/board/index.php?/topic/54340-post-your-speed-over-wifi/
http://www.gp32x.com/board/index.php?/topic/54921-you-tube-through-vlc/
http://www.gp32x.com/board/index.php?/topic/54831-minitube/
http://www.gp32x.com/board/index.php?/topic/54901-possible-wifi-issues/ |
|
139 | Base OS | Bug Report | Low | Space should not be accepted in hostname | Closed | |
Task Description
http://www.gp32x.com/board/index.php?/topic/54878-embarassingly-nooby-questions-from-a-new-pandora-owner/page__view__findpost__p__885235
If the user names their Pandora using a space in the name, "This will prevent Xfce from operating correctly". Should trap this when asking for a host name. |
|
137 | Base OS | Feature Request | Low | Default vim config | Closed | |
Task Description
The current vim install does come without any config file. By default this means vim does work in "vi compatible mode" which makes it hardly usable. The attached config file is meant to be used as ~/.vimrc, so it should be added to "/etc/skel/.vimrc". The file is partly based on the default config used by gentoo.
Things this config file sets:
* Start in "vim mode" by default
* activate ruler
* set width of linenumber in ruler
* assume that the terminal uses a dark background
* configure what hitting backspace removed (newlines, ...)
* some magic to have different encoding formats working in a more sane way |
|
136 | Core | Bug Report | High | rather high battery discharge while Pandora is powered ... | Closed | |
Task Description
The Pandora does seem to use too much energy while it is turned off. A testcase: The pandora was turned off over night (about 8 hours) and battery state dropped from 98% to 96%. When removing the battery from the pandora for the same amount of time, the state is not changed at all.
This is based on the zaxxon firmware release with hotfix3, beta2.
Problem: if you don't use the pandora for a while and forget to remove the battery you can cause a deep discharge which might damage the battery. This is also a problem if the Pandora does eg shutdown itself since power is out and you can't directly attach it to a charger.
Possible causes:
* Design fault in the board.
* Too much powered on while the device *should* be completely powered off. The only things that should get power are the clock and the power button. This should basically not drain much.
Regarding the clock: The PalmPre is based on the OMAP3, too. There you basically have no discharge when it is powered off, so it is unlikely that the fault is in the OMAP3 itself. |
|
134 | Core | Bug Report | Low | please add a working phonon backend | Closed | |
Task Description
Please see : http://www.gp32x.com/board/index.php?/topic/54831-minitube/page__view__findpost__p__883993
:) |
|
133 | Base OS | Feature Request | Low | Add TiMidity++ to OS? | Closed | |
Task Description
Hey, was just wondering if it would be possible to have TiMidity++ (http://timidity.sourceforge.net/) added with a hotfix, would allow games/ports that use it (the Zelda ports here: http://www.gp32x.com/board/index.php?/topic/54633-zelda-kind-of), zdoom and heretic (I think unless pickles has changed them) and other stuff that uses it to not have to include it in the .pnd and saving SD space... just an idea... |
|
132 | Base OS | Bug Report | Medium | Deleting big files doesn't work | Closed | |
Task Description
When deleting a file on the SD card, the Pandora OS moves it into the thrash folder in the internal memory. That itself isn't very nice (shouldn't there be a trash folder on the SD card as well, to reduce unnecessary copying?), but if the file is too big for the internal memory, a error message appears, and the file cannot be deleted on the Pandora directly. |
|
131 | Core | Bug Report | Medium | bluetooth drivers read timeout too trigger-happy/logic ... | Closed | |
Task Description
Shamelessly plugged from the forums, to get proper bug tracking and notifications on this. My post:
@notaz:
+ /* there hould be no rx in progress at this point */
+ if (info->rx_skb != NULL) {
+ dev_err(info->dev, "Receive timed out, %i done, %li left, "
+ "LSR=%02x, IER=%02x\n", info->rx_skb->len + 1,
+ info->rx_count, hci_h4p_inb(info, UART_LSR),
+ hci_h4p_inb(info, UART_IER));
+ info->rx_timed_out = 1;
+ }
Could you share your rationale for that comment in drivers/bluetooth/hci_h4p/core.c? (Oh and there's a typo, too :P )
EDIT: Asking this because commenting that block out changed status of bluetooth (for me) from unusable (can receive ~20-500kB of data before ppp connection halting) to fully working - used to have big problems playing 32kbps AAC stream (max 2 min), now already 4 mins of 96kbps, but i still think we need some receive timeout mechanism, but this one (as it currently stands) doesnt work.
Notaz's reply:
I don't really remember, it was more than 1.5 years ago. That driver is a hack, will need to review it, does it work stable with that code removed?
My reply:
For the non-IRC people:
urjaman on IRC said:
(22:47:45) urjaman: notaz: about stability: i'm on irc atm with that driver, its been playing internet radio for a few hours without problems now, but i don know for sure.
(22:48:00) urjaman: *dont know
(22:50:11) urjaman: my logic: if the serial port _never_ misses a byte it should be ok - IMO scary without some receive timeout, but works for me |
|
130 | Core | Feature Request | Low | [PATCH] in vsense mbuttons mode down=middle click | Closed | |
Task Description
Patch attached. |
|
129 | Base OS | Bug Report | Medium | [PATCH] bluetooth script fails to store/restore bluetoo ... | Closed | |
Task Description
Patch to op_bluetooth.sh attached. |
|
128 | Core | Bug Report | Medium | pndnotifyd Segfault | Closed | |
Task Description
pndnotifyd Segfault when the PXML.xml attached with th pnd contain non-ascii characters (for translation) |
|
127 | Application | Bug Report | High | Firefox hangs when selecting the menu bar | Closed | |
Task Description
Just try to do something by accessing the menu, either thru keyboard or ts and it hangs. Maybe a problem with bookmarks ? |
|
126 | Application | Bug Report | Very Low | CPU Speed Typo? | Closed | |
Task Description
If you set the CPU speed to 600 it warns that it is greater than 600. I thought 600 was the guaranteed speed? |
|
125 | Core | Bug Report | Low | wrong error handling in wl1251 platform initilization | Closed | |
Task Description
in
http://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blob;f=arch/arm/mach-omap2/board-omap3pandora.c;h=c6637426bf3a61f5bd0f85338304d0d8d114f67d;hb=HEAD
I see:
555 ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
556 if (ret < 0)
557 goto fail_nreset;
the goto should go to: fail_irq instead of fail_nreset
Denis |
|
122 | Base OS | Feature Request | Medium | SDL 1.2 optimizations | Closed | |
Task Description
At the moment, SDL is a bit slow and has vsync problems (tearing, etc.).
It could need optimizations to use the hardware. |
|
120 | Base OS | Bug Report | Medium | Python is missing some modules | Closed | |
Task Description
It seems like Python is missing some modules (like cgi) which should be included in the base installation. |
|
119 | Base OS | Feature Request | Low | ext4 support | Closed | |
Task Description
Don't know how much work this would be to get a later version of the linux firmware to add this, but it would be nice to have more filesystem support. |
|
117 | Application | Bug Report | Low | Quake1 / Nanogl Lockup | Closed | |
Task Description
After the last TI gles driver update quake1 (vanilla glquake 1 sources) and nanogl started to lockup the pandora after a few minutes of gameplay. Oddly all the other apps using nanogl seem stable.
There is some bad code in nanogl (missing/null function pointers), which I need to clean up and afterwards reevaluate this issue. |
|
116 | Application | Bug Report | Low | Freetype issues (freeciv sdl client) | Closed | |
Task Description
With the SDL client for freeciv the font characters show up as square blocks and garbage characters. This may be related to freetype.
I had also heard that battle at wesnoth had similar issues. |
|
115 | Base OS | Bug Report | Medium | OS is missing libvorbisidec.so | Closed | |
Task Description
Please add to next hotfix, srb2 needed this file. My temporary hack was to modify the LD_LIBRARY_PATH (didnt like having to so this, but I think the way srb2 is loading the library it wouldnt work without it) and include the library in the pnd.
Once this lib is added ill do an update on srb2 and remove the LD hack. |
|
114 | Application | Bug Report | Low | Chromium browser does not support HTTPS/SSL | Closed | |
Task Description
The Angstrom version of Chrome/Chromium web browser fails to open https links. This is a bug which has been fixed upstream, but not in the version packaged for Pandora. |
|
113 | Core | Feature Request | Low | Add aliases for bash, eg ll for ls -l. Just uncommentin ... | Closed | |
Task Description
Aliases like ll for "ls -l" are common. They are super useful on the Pandora (less to type, no Fn key needed).
The .bashrc already includes them but they are commented. Please enabled the ls aliases and colored output. I do not think enabling the "-i" aliases too would be a good idea. |
|
112 | Core | Bug Report | Medium | .pnd files with spaces in filename won't work | Closed | |
Task Description
pnd_run.sh barfs when given a file with space in it's name.
Also pnd_run bin doesnt enclose the .pnd name, it should.
/usr/pandora/scripts/pnd_run.sh -p "PicoDrive_180beta2 .pnd" -e PicoDrive.run
pnd set to `PicoDrive_180beta2 .pnd'
exec set to `PicoDrive.run'
/usr/pandora/scripts/pnd_run.sh: line 50: [: PicoDrive_180beta2: unary operator expected
when run from menu:
in fork!
df: /media/mmcblk1p1/pandora/desktop//PicoDrive_180beta2: can't find mount point
mountpoint:
/usr/pandora/scripts/pnd_run.sh: line 120: [: !: integer expression expected
not mounted on loop yet, doing so
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
error determining fs, output was cannot |
|
111 | Core | Feature Request | Medium | Minimal Boot to X_Term / Pico | Closed | |
Task Description
Can we add an option to the boot menu for a minimal boot to X-term, and include Pico in the base OS?
This would allow us to fix problems we've caused by messing around with starup scripts etc.. |
|
109 | Core | Bug Report | Medium | Wifi looses connection after 20-30 minutes | Closed | |
Task Description
While logged into XFCE and browsing for an extended period the wireless will loose its connection. It will not reconnect until the Wifi is toggled off and back on again using the ToggleWifi application.
I have not tested this on an unsecured network. My wireless is WPA2 encrypted. |
|
107 | Base OS | Bug Report | Low | Secure Wifi will not connect until XFCE is loaded | Closed | |
Task Description
My Pandora is set to load MiniMenu on boot. I can't use any networked apps because wifi will not automatically connect on boot. XFCE needs to be loaded at least once so that i can enter my keychain password. Once i've entered my password Wifi connects and i can return to MiniMenu. |
|
103 | Base OS | Feature Request | Low | OpenAL library in firmware? | Closed | |
Task Description
Is there any chance we can have OpenAL installed as a default library? I'm considering porting some software that requires it (and truth be told I manually compiled and installed it for my own use atm...) |
|
102 | Base OS | Bug Report | Very Low | Pandora key does not close XFCE menu | Closed | |
Task Description
If the XFCE menu has been opened by a touchscreen command, it can also be closed by hitting the logo again. However, opening the menu this way and then hitting the Pandora key only spawns more instances of the menu. Least intrusive way to close those seems to be to select "Logout" and hit Cancel. |
|
101 | Core | Bug Report | High | Cannot unmount SD card or USB stick through the GUI | Closed | |
Task Description
When I rightclick and select "unmount" I always get an error, see below.
unmounting from a terminal window works fine.
Also see:
http://www.gp32x.com/board/index.php?/topic/54353-unmount-sd-card-hdd/
"Unable to unmount .... Cannot open /media/.hal-mtab" |
|
100 | Core | Bug Report | Low | Demos & Examples - remove from image | Closed | |
Task Description
/usr/bin/qt4/demos is 9Mb in size and /usr/bin/qt4/examples is 11Mb.
I'm guessing these are only useful for developers. Can they safely be removed?
edit: additionally, /usr/share/vim is 12M. Can those of us who are never going to use VIM remove it? |
|
98 | Application | Bug Report | Medium | Pidgin freezes (msn) | Closed | |
Task Description
Pidgin freezes when using the msn protocol. Sometimes it can last 25 minutes before doing so, sometimes it freezes instantly. Usually it's after only a few minutes. Once it freezes you are still able to close it using the built in crash manager (?!)
This happens both when running from XFCE and Minimenu. |
|
97 | Base OS | Feature Request | Low | Missing kernel-module-snd-usb-audio | Closed | |
Task Description
Missing kernel-module-snd-usb-audio would be nice to hook the pandora up to my logitec speakers and have audio out and a hub for hooking up other devices at the same time... |
|
96 | Base OS | Feature Request | Low | Customizable SD mount options | Closed | |
Task Description
Right now writes are really slow because they write synchronously: there should be an option to change this so that the user is first taught how to unmount an sd card then remove it... |
|
95 | Base OS | Bug Report | Medium | Cannot Connect to Ad-Hoc WIFI | Closed | |
Task Description
I am Currently tethering my Mobile Network via my Android Phone
I cannot connect on this WIFI ... it's a Ad-Hoc connection
Everything else works, PC, Netbook's and iPod Touch
But Pandora seems to have some problems |
|
93 | Base OS | Bug Report | Low | zaxxon first boot: don't ask for user prompt if already ... | Closed | |
Task Description
How to reproduce:
First boot, Pandora's Box has been opened. Prompt for Full name, username, and password.
Then, simply press OK without selecting whether minimenu or xfce. None selected. Then you can't do any more. Wizard closes and you don't need any more options.
After manual reboot, the wizard starts again and asks for name again. But the username already exists. |
|
92 | Base OS | Bug Report | Medium | Startupmanager | Closed | |
Task Description
When trying to toggle
Enable/Disable Autologin
After initially enabling this feature, attempt was made to disable unsuccessfully.
System says that it saves this info, upon reboot, login screen shows up again.
Wifi toggle seems to work, as does Default GUI, & selecting default user |
|
91 | Base OS | Bug Report | Medium | libaudiofile is installed by codec pack instead of in b ... | Closed | |
Task Description
Certain emulators such as Fuse are reliant on this file and I am assured it should be part of the default load-out (or rather in the HotFix) rather than in the codec pack as it's not a copyright issue. |
|
90 | Base OS | Feature Request | Low | Adding more "general libs" to the OS image | Closed | |
Task Description
It would be nice if some more generic libs that could be used by software ported to the Pandora would be available in the base image. For example for Wesnoth we do require these additional libs (names taken from http://www.angstrom-distribution.org/repo/?pkgname=boost ):
* boost-iostreams
* boost-regex
* boost-serialization
Beside this Wesnoth does also require this package (from http://www.angstrom-distribution.org/repo/?pkgname=lua5.1 ):
* lua5.1
In general I would recommend pulling in all of boost. This means the dependencies as well as the recommends. Here is a short paste of what this means:
Depends:
libc6, libstdc++6, libgcc1, boost-filesystem, boost-thread, boost-date-time, boost-system
Recommends:
boost-date-time, boost-filesystem, boost-graph, boost-iostreams, boost-program-options, boost-python, boost-regex, boost-serialization, boost-signals, boost-system, boost-test, boost-thread
There are probably some other packages/lib that might make sense to directly have in the OS image, but they currently don't come to my mind, so I can't list them here. ;) |
|
89 | Base OS | Bug Report | Medium | XFCE not loading up defaults when MiniMenu is selected ... | Closed | |
Task Description
When mini menu is set to the default menuing system, XFCE settings (selected theme, pandora-specific key bindings) do not get loaded by default, they need to be forced by opening a terminal and typing xfwm4 --replace |
|
88 | Base OS | Feature Request | Low | pydoc is missing | Closed | |
Task Description
I love to use the pandora for some on-the-go python development, and I think I'm not the only one, but unfortunately the module pydoc is missing, which is needed for doing help(sys) on the interactive prompt. Could you please include that in the next firmware revision? Thanks! |
|
87 | Core | Bug Report | Medium | default /etc/network/interfaces is causing problems | Closed | |
Task Description
The default /etc/network/interfaces has 192.168.1.0/24 subnet set up for usb0 which causes wifi connectivity to fail for users that have wifi on the same subnet.
All addresses should be edited out from /etc/network/interfaces, eth* stuff should probably be dropped too. |
