|
86 | Base OS | Feature Request | Very Low | Including small development frameworks/projects in the ... | Closed | |
Task Description
It could be nice, if some very small development frameworks were included in the OS since the Pandora should make it as easy as possible for beginners to start programming.
That means: A "Start coding now"-wizard/script can be run from the desktop from which you select the type of project (c++, python, SDL...) you want to do. It copies the framework to SD-Card, opens it in an editor/IDE to see the sourcecode and leads you to the first compile and run. Can be combined with a PND-Packer-script.
Ideas for frameworks:
- a small python template (pygame?)
- a template project for an SDL-project (red square in fullscreen)
- a template project for OpenGL ES (a simple colored triangle)
- a template project for using NEON or DSP
- something with a GUI (QT?)
- general HelloWorlds
- all as simple as possible!
I know that this could help many beginners to actually start programming because the first compile is often hardest step (setting up toolchain, hassle with libs, includes, dependencies, compiler options, choice of editor, makefiles, all that stuff).
Feel free to delete this feature request if it doesn't fit into the bugtracker. |
|
88 | Base OS | Feature Request | Low | pydoc is missing | Closed | |
Task Description
I love to use the pandora for some on-the-go python development, and I think I'm not the only one, but unfortunately the module pydoc is missing, which is needed for doing help(sys) on the interactive prompt. Could you please include that in the next firmware revision? Thanks! |
|
90 | Base OS | Feature Request | Low | Adding more "general libs" to the OS image | Closed | |
Task Description
It would be nice if some more generic libs that could be used by software ported to the Pandora would be available in the base image. For example for Wesnoth we do require these additional libs (names taken from http://www.angstrom-distribution.org/repo/?pkgname=boost ):
* boost-iostreams
* boost-regex
* boost-serialization
Beside this Wesnoth does also require this package (from http://www.angstrom-distribution.org/repo/?pkgname=lua5.1 ):
* lua5.1
In general I would recommend pulling in all of boost. This means the dependencies as well as the recommends. Here is a short paste of what this means:
Depends:
libc6, libstdc++6, libgcc1, boost-filesystem, boost-thread, boost-date-time, boost-system
Recommends:
boost-date-time, boost-filesystem, boost-graph, boost-iostreams, boost-program-options, boost-python, boost-regex, boost-serialization, boost-signals, boost-system, boost-test, boost-thread
There are probably some other packages/lib that might make sense to directly have in the OS image, but they currently don't come to my mind, so I can't list them here. ;) |
|
96 | Base OS | Feature Request | Low | Customizable SD mount options | Closed | |
Task Description
Right now writes are really slow because they write synchronously: there should be an option to change this so that the user is first taught how to unmount an sd card then remove it... |
|
97 | Base OS | Feature Request | Low | Missing kernel-module-snd-usb-audio | Closed | |
Task Description
Missing kernel-module-snd-usb-audio would be nice to hook the pandora up to my logitec speakers and have audio out and a hub for hooking up other devices at the same time... |
|
103 | Base OS | Feature Request | Low | OpenAL library in firmware? | Closed | |
Task Description
Is there any chance we can have OpenAL installed as a default library? I'm considering porting some software that requires it (and truth be told I manually compiled and installed it for my own use atm...) |
|
111 | Core | Feature Request | Medium | Minimal Boot to X_Term / Pico | Closed | |
Task Description
Can we add an option to the boot menu for a minimal boot to X-term, and include Pico in the base OS?
This would allow us to fix problems we've caused by messing around with starup scripts etc.. |
|
113 | Core | Feature Request | Low | Add aliases for bash, eg ll for ls -l. Just uncommentin ... | Closed | |
Task Description
Aliases like ll for "ls -l" are common. They are super useful on the Pandora (less to type, no Fn key needed).
The .bashrc already includes them but they are commented. Please enabled the ls aliases and colored output. I do not think enabling the "-i" aliases too would be a good idea. |
|
119 | Base OS | Feature Request | Low | ext4 support | Closed | |
Task Description
Don't know how much work this would be to get a later version of the linux firmware to add this, but it would be nice to have more filesystem support. |
|
122 | Base OS | Feature Request | Medium | SDL 1.2 optimizations | Closed | |
Task Description
At the moment, SDL is a bit slow and has vsync problems (tearing, etc.).
It could need optimizations to use the hardware. |
|
130 | Core | Feature Request | Low | [PATCH] in vsense mbuttons mode down=middle click | Closed | |
Task Description
Patch attached. |
|
133 | Base OS | Feature Request | Low | Add TiMidity++ to OS? | Closed | |
Task Description
Hey, was just wondering if it would be possible to have TiMidity++ (http://timidity.sourceforge.net/) added with a hotfix, would allow games/ports that use it (the Zelda ports here: http://www.gp32x.com/board/index.php?/topic/54633-zelda-kind-of), zdoom and heretic (I think unless pickles has changed them) and other stuff that uses it to not have to include it in the .pnd and saving SD space... just an idea... |
|
137 | Base OS | Feature Request | Low | Default vim config | Closed | |
Task Description
The current vim install does come without any config file. By default this means vim does work in "vi compatible mode" which makes it hardly usable. The attached config file is meant to be used as ~/.vimrc, so it should be added to "/etc/skel/.vimrc". The file is partly based on the default config used by gentoo.
Things this config file sets:
* Start in "vim mode" by default
* activate ruler
* set width of linenumber in ruler
* assume that the terminal uses a dark background
* configure what hitting backspace removed (newlines, ...)
* some magic to have different encoding formats working in a more sane way |
|
142 | Core | Feature Request | Medium | Visible Sleep Indicator | Closed | |
Task Description
Could we please get a visual indication that the Pandora is in sleep/low-power mode? I would suggest one of the case LEDs either turn on or blink to indicate the sleep mode. |
|
145 | Base OS | Feature Request | Low | missing tune2fs command | Closed | |
Task Description
bash: tune2fs: command not found
Please include tune2fs into basic OS image. Would be handy for managing filesystem on SD cards. |
|
151 | Base OS | Feature Request | Medium | [PATCH] Turn Off LCD when closing the lid | Closed | |
Task Description
Just added a few lines to op_lid.sh, will power off the LCD when you close the LID. Patch attached. |
|
153 | Application | Feature Request | Low | [PATCH] HACK: change OPP level according to set Mhz | Closed | |
Task Description
It's a hack, use on your own risk as always. I feel like abusing the tracker dropping all my patches here, but whatever. Patch attached. |
|
161 | Base OS | Feature Request | Low | Add ftp to base OS | Closed | |
Task Description
Include the netkit-ftp package so the Pandora has at least basic ftp functionality out of the box. |
|
171 | Core | Feature Request | Medium | Update clock from hardware when restoring from low powe ... | Closed | |
Task Description
The clock occasionally does weird things during low power mode, sometimes gaining time, sometimes losing. This is most likely a result of the CPU being reduced to 14Mhz and the system clock being unable to keep up.
A convenient work around is to make a call to "/sbin/hwclock --hctosys" during wake-up to load the hardware clock back into the system clock. This may add an extra second or two to the wake-up time but will prevent confusion caused by clock being very incorrect. |
|
174 | Base OS | Feature Request | Low | Include modem-manager in base image | Closed | |
Task Description
Please consider including the modemmanager package in the base distibution.
This allows 3G wireless dongles to work out of the box (configured via network-manager). |
|
184 | Core | Feature Request | Medium | libpnd: Add a function to get all mounted PNDs | Closed | |
Task Description
Add a function to get all mounted PNDs. Because it's very annoying to check all the menu/desktop folders on all of the SD-Cards. |
|
195 | Core | Feature Request | High | Start re-recharge of battery sooner | Closed | |
Task Description
Increase battery LVL_4 and LVL_3 threshold.
After reaching 100%, in some cases the charge circuit enters "battery full" state, stops charging, and begins to discharge. This is not entirely unexpected behavior according to the spec sheet, although I don't fully understand exactly the situations in which it completes charging. Once the battery is full, the battery will begin discharging. The charge circuit automatically restarts the recharge once the voltage has gone below a certain level (crosses below the LVL_3 voltage threshold)
The default LVL_3 voltage threshold is 3.902 volts which is at about 80-85% battery level as recorded by bq27500 chip. In my opinion, this is way too low.
Setting the BCIMFTH2 register to 0xCB increases the voltage threshold to about 4.003 volts which is about 93%.
Setting it to 0xDC may also be worthwhile, which is just over 95%.
By default, if a user leaves their Pandora plugged in overnight, they may wake up to find their Pandora has stopped charging and the capacity has dropped to almost 80%, which can be quite startling to some users who will then report it as a bug.
This change will ensure that it never drops below 93-95%, a much more acceptable level.
Specific code changes suggested, in the /drivers/power/twl4030_bci_battery.c file, somewhere in the twl4030_bci_battery_probe function (or a function called by it), add the lines:
/********************************/
#define KEY_FTH2 0x7F
#define REG_BCIMFTH2 0x017
ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, KEY_FTH2, REG_BCIMFKEY);
if (ret)
return ret;
ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, 0xDC, REG_BCIMFTH2);
if (ret)
return ret;
/********************************/
(Move defines to the top, as appropriate) |
|
196 | Core | Feature Request | Medium | [PATCH] Add tablet support into kernel | Closed | |
Task Description
Hi,
This should be a quite simple thing, but my first time touching
the OE repo and i cant test it, so be careful. |
|
212 | Core | Feature Request | Low | Add curl to core installed programs | Closed | |
Task Description
I wish for curl to be installed by default on the upcoming pandora FWs,
As reported by the angstrom repo, where I install using the command:
$sudo su
...
#opkg update
#opkg install curl
curl 7.21.2-r4.0.9 is 78.57 Kilobytes with the dependencies
Depends:libcurl4, libgnutls26, libgcrypt11, libgpg-error0, libc6, libz1
I do not know which is installed by default, but I'm sure libc6 is, so I'm going to state the info on the rest of the packages for its memory space usage on the NAND
libcurl4(142.99 Kilobytes):
Command line tool and library for client-side URL transfers.
Depends:libc6, libgnutls26, libz1, libgcrypt11, libgpg-error0, as you can see, it has the same dependencies as above, so it seems both curl and libcurl are probably exclusive from the others, but I will go forward and state the rest of the dependencies
libgnutls26 2.8.6-r10.0.5 (291.44 Kilobytes)
Depends:libz1, libgcrypt11, libgpg-error0, libc6, (again, it looks like the above depends on this)
libgcrypt11 1.4.1-r0.9 (220.35 Kilobytes)
Depends: libgpg-error0, libc6, (Oh look, we're not looking at libz1 anymore)
libgpg-error0 1.4-r7.1.9 (5.78 Kilobytes)
Depends:libc6
now to the lone libz1
libz1 1.2.3-r7.0.9 (41.95 Kilobytes)
Depends:libc6
So, in the case we already have the gpg stuff, then the installation is only 221.56KB, however, with the zlib and the gpg included, the total comes to 781.08KB
So, now that the cost is out of the way, What are the goods and bads?
Good:
Its a very versatile CLI program to get and send information over http through the network, and is tolerant of network issues
It doesn't take too much space relative to things that have been pulled out, like abiword.
The libcurl is a very good library, and could be of great benefit to some future projects.
Bad:
Well, we already have wget, which is not as configurable, and wget hates Craig's appstore
Here's the link to curl on the repo
http://www.angstrom-distribution.org/repo/?pkgname=curl |
|
220 | Core | Feature Request | Low | Please include /usr/bin/xkbset | Closed | |
Task Description
One of the first things after installing HF5 was downloading xkbset, because it is necessary for proper L-R buttons mapping as mouse buttons. Could you please include that in the system?
I am using urjaman's executable from here:
http://www.gp32x.com/board/index.php?/topic/55124-remapping-the-mouse-buttons-etc/page__st__15__p__896576&#entry896576
Even better would be a GUI that allows mapping of L-R buttons for mouse, just like GUI for nubs :) But including xkbset will be already good. |
|
226 | Core | Feature Request | High | Boot from /dev/sda devices requested | Closed | |
Task Description
Boot from usb hard disk not supported. This should be a rather simple fix of adding the sdx devices and adjust the boot scripts??
I was able to put this autoboot.txt on mmc 0:1
setenv bootargs debug root=/dev/sda1 rw rootdelay=2 console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
ext2load sda 0:1 0x80300000 /boot/uImage
bootm 0x80300000
This failed with amongst other things "Block device sda 0 not supported" and something about failing to load kernel
So I then changed the autoboot file to this
setenv bootargs debug root=/dev/sda1 rw rootdelay=2 console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
ext2load mmc 0:3 0x80300000 /boot/uImage
bootm 0x80300000
All this did was die after the kernel loaded.
I believe I could much better make use of this device if I could boot from some faster storage, please advise :) |
|
234 | Core | Feature Request | Medium | Changeable behaviour when closing the lid | Closed | |
Task Description
As it was requested on forum.gp2x.de and I think it's a good idea I've written some scripts to allow the user to change what happens when the lid is opened/closed.
There are 3 Settings:
-The old behaviour (turning off the screen)
-Go into low power mode
-Shutdown
Default behaviour is still the same: Turn the screen off. Maybe we could change this to low power mode? I don't know.
I made a lot of changes to op_lid.sh: http://pastebin.com/GT3qxWSx (diff: http://pastebin.com/Z8GwpDj8 )
I changed line 11 in op_power.sh to: if [ $powerstate -ne 0 ]; then
And wrote a gui for changing the setting using zenity: http://pastebin.com/9JvSTqfQ
(I still can't upload any files, don't know if it's the fault of my browser, that's why I use this paste service) |
|
241 | Application | Feature Request | Low | MiniMenu shall remember state for next start | Closed | |
Task Description
With the setting "Live (not exit) on app run?" set to "NO" the currently selected tab and item shall be remembered, so that you return to the same state, in which you left MiniMenu. |
|
248 | Core | Feature Request | Medium | Support for hibernation by caching to SD card | Closed | |
Task Description
It would be very desirable that the PandoraOS could hibernate, and that this action can easily be accessed/triggered with either a hotkey or as an action for the max-idle-time-event or lid-close-event.
That would be the battery friendly universal action to quickly pause/resume any arbitrary application/task.
The current standby mode is far to power consuming for breaks longer than ~ 1 hour. Improving standby mode to be more battery-friendly would of course be too highly appreciated and practical.
If hibernation is triggered, RAM content gets written to a special file or partition on a SD card. The boot-manager of course needs to recognize such a RAM-file on SD-cards. In case it finds more than 1, i.e.: multiple cards/partitions, the one with the newest timestamp gets priority.
256MB RAM with about 10-20 MB/s read/write time to SD, would result in 25-12 seconds for going into or out of hibernation, which would be acceptable for me. In practice it would mean, that if I quickly have to pause me OpenPandora operation (i.e. train stop), I just close my lid, and put the Pandora into my pocket (2-4 seconds), and I am then trusting that the rest reliable happens in my pocket (10-20 seconds). |
|
275 | Core | Feature Request | Low | User should be a member of the cdrom group | Closed | |
Task Description
These permissions are needed for CD/DVD burning/player apps.
From bdc88595d8af726b3bf4745ece310f92299d8759 Mon Sep 17 00:00:00 2001
From: Paul Dersey
Date: Sun, 19 Feb 2012 17:22:41 -0500
Subject: [PATCH] pandora-first-run-wizard: add user to cdrom group
---
recipes/pandora-system/pandora-first-run-wizard.bb | 2 +-
.../pandora-first-run-wizard/first-run-wizard.sh | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/recipes/pandora-system/pandora-first-run-wizard.bb b/recipes/pandora-system/pandora-first-run-wizard.bb
index 904dc4a..a63dc0c 100755
--- a/recipes/pandora-system/pandora-first-run-wizard.bb
+++ b/recipes/pandora-system/pandora-first-run-wizard.bb
@@ -6,7 +6,7 @@ RDEPENDS = "hsetroot zenity dbus pandora-wallpaper-official tslib tslib-calibrat
COMPATIBLE_MACHINE = "omap3-pandora"
-PR = "r28"
+PR = "r29"
SRC_URI = " \
file://first-run-wizard.sh \
diff --git a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
index a801e3f..f30b80e 100755
--- a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
+++ b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
@@ -88,7 +88,7 @@ while ! username=$(zenity --title="Enter your username" --entry --text "Please c
zenity --title="Error" --error --text="Please try again." --timeout 6
done
-while ! useradd -c "$name,,," -G adm,audio,video,netdev,wheel,plugdev,users "$username" ; do
+while ! useradd -c "$name,,," -G adm,audio,cdrom,netdev,plugdev,users,video,wheel "$username" ; do
username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
done
--
1.7.8.3 |
|
276 | Core | Feature Request | Low | Kernel 3.2.x: add script to activate zram | Closed | |
Task Description
Please add a script to activate zram (RAM compression) when using the new kernel. More info about how to do this is available in this post:
http://boards.openpandora.org/index.php?/topic/7844-superzaxxon-beta-3-released/#entry138834
http://boards.openpandora.org/index.php?/topic/7226-superzaxxon-beta-11-released/page__st__20#entry128665
Please be aware though that Linux-SWAT had to explicitly set a value in "/sys/block/zram0/disksize" to get it work with Slackware. Over here the following is automatically set:
pandora:~$ cat /sys/block/zram0/disksize
61648896
Sadly I can *not* change this value, even using sudo:
pandora:~$ ls -l /sys/block/zram0/disksize
-rw-r--r-- 1 root root 4096 Apr 9 12:51 /sys/block/zram0/disksize
pandora:~$ cat /sys/block/zram0/disksize
61648896
pandora:~$ sudo echo 61648888 > /sys/block/zram0/disksize
-bash: /sys/block/zram0/disksize: Permission denied
Basically the following commands are required in a startup script to automatically create the "compressed swap inside RAM" aka zram (possibly a check if the modprobe was successful makes sense as well as checking for the size of the created ramdisk):
modprobe zram
mkswap /dev/zram0
swapon -p 5 /dev/zram0 |
|
279 | Core | Feature Request | Medium | pidgin requires (more) locales to work correctly | Closed | |
Task Description
Please add the following package to allow umlauts working in pidgin:
glibc-gconv-utf-16
After installing this package I no longer have a problem receiving umlauts in pidgin. Besides it might also make sense to add "glibc-gconv-cp1250" which might be required for western europe and koi8-r which seems to be missing for xchat and conversion of chars there.
At the moment the following locale related packages are installed (as of SuperZaxxon Beta3):
glibc-charmap-utf-8 - 2.9-r35.3.5
glibc-gconv - 2.9-r35.3.5
glibc-gconv-cp1252 - 2.9-r35.3.5
glibc-gconv-ibm850 - 2.9-r35.3.5
glibc-gconv-iso8859-1 - 2.9-r35.3.5
glibc-gconv-iso8859-15 - 2.9-r35.3.5
Please add:
glibc-gconv-cp1250
glibc-gconv-koi8-r
glibc-gconv-unicode
glibc-gconv-utf-16
Thanks! |
|
321 | Core | Feature Request | Low | Support overriding all category fields with .ovr | Closed | |
Task Description
Currently only the main category and the first sub category of the main category can be overridden using a .ovr file while libpnd uses additional PXML supplied category date to construct the desktop file. This makes it difficult to work with PNDs that supply unwanted data in these additional fields. |
|
2 | Core | Bug Report | High | pndnotifyd | Closed | |
Task Description
pndnotifyd needs to be restarted before it works (tested in image 2009-12-21)
This can manually be fixed by installing two packages:
http://www.angstrom-distribution.org/unstable/feed/armv7a/base/sessreg_1.0.4-r0.2_armv7a.ipk
http://djwillis.openpandora.org/pandora/packages/pandora-libpnd_1.0-r12.5_armv7a.ipk
And adding to lines to slim.conf:
sessionstart_cmd /usr/bin/sessreg -a -l $DISPLAY %user
sessionstop_cmd /usr/bin/sessreg -d -l $DISPLAY %user |
|
3 | Core | Bug Report | High | Permissions for brightness and CPU Speed | Closed | |
Task Description
/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/brightness
/proc/pandora/cpu_mhz_max
Those values cannot be changed by the user, only by root.
Should be changed. |
|
4 | Core | Bug Report | Low | Missing Icons | Closed | |
Task Description
Some icons are missing:
XFCE4 Settings Manager: Accessibility, Appearance, Desktop, Display, File Manager, Keyboard, Mouse
The icons on the panel (Mail, Web, etc.) are also missing (they're invisibile) |
|
5 | Core | Bug Report | High | Touchscreen Calibration stops the First-Boot-Wizard | Closed | |
Task Description
When selecting the touchscreen calibration within the first-boot-wizard, the script stops after the calibration and the Pandora continues to boot. |
|
6 | Core | Bug Report | Medium | Calibrate Touchscreen within the Settings-Menu of XFCE ... | Closed | |
Task Description
It doesn't run. |
|
7 | Core | Bug Report | Low | No help or tips and tricks yet | Closed | |
Task Description
Help is missing as are the tips and tricks on startup. |
|
8 | Core | Bug Report | High | WiFi doesn't work | Closed | |
Task Description
Error inserting /lib/modules/2.6.27-omap1/kernel/drivers/net/wireless/wl12xx/wl1251_sdio.ko: -1 Unknown symbol in module |
|
9 | Core | Bug Report | High | pmenu doesn't work | Closed | |
Task Description
Running pmenu leads to:
ERROR: config_read_file() failed: skins/Platinum/skin.cfg (line 21 of config skin.c)
(config_skin.c:22)
ERROR: cfg_gui_read failed, exiting... ( main.c:1517) |
|
10 | Core | Bug Report | High | Permissions / sudoers isse in 12-21 image | Closed | |
Task Description
pndnotifyd will create .desktop files
Running those will fail; if you've just done a recent sudo, they'll run fine
Probably sudoers file needs fix |
|
11 | Core | Bug Report | High | Console keymap: Two keys not mapped yet | Closed | |
Task Description
INS (Fn + Del) is not working in console yet.
ALT and CTRL are not working in console yet.
The rest of the console keys are fine (tested in nano).
Keys in X are mapped completely. |
|
15 | Core | Bug Report | Medium | Permissions / automounted SD Card | Closed | |
Task Description
Only root has write access to automounted SD Cards. The normal user can only read. |
|
16 | Core | Bug Report | Medium | normal user login fails over serial/ttys | Closed | |
Task Description
Only root can login over serial or ttys, and only if it has no password. Ssh login works fine.
After some debugging it seems to be PAM issue, possibly recipes/shadow/ misconfiguration in OE. Maybe we sould use IMAGE_LOGIN_MANAGER = "busybox" instead of IMAGE_LOGIN_MANAGER = "shadow" as we don't need super security? |
|
18 | Core | Bug Report | Medium | Some errors in first-run-wizard.sh | Closed | |
Task Description
Line 154 and 157 need to be changed:
153 if [ $launcher == "xfce" ]; then
154 sed -i 's/.*sessions.*/sessions xfce4,pmenu/g' /etc/slim.conf
155 echo Xfce selected as default interface
156 else
157 sed -i 's/.*sessions.*/sessions pmenu,xfce4/g' /etc/slim.conf
158 echo PMenu selected as default interface
159 fi
They should be:
154 sed -i 's/.*sessions .*/sessions xfce4/g' /etc/slim.conf
157 sed -i 's/.*sessions .*/sessions pmenu/g' /etc/slim.conf
Note the empty space behind sessions. :) |
|
20 | Core | Bug Report | Low | pndevmapperd: op_lid.sh / op_lidtoggle.sh | Closed | |
Task Description
pndevmapperd tries to run /usr/pandora/scripts/op_lidtoggle.sh, however, the filename is /usr/pandora/scripts/op_lid.sh
Either rename the file or change the call ;) |
|
21 | Core | Bug Report | Low | op_bright.sh doesn't work correctly | Closed | |
Task Description
The file has to be changed to make it work.
The working script is:
#!/bin/bash
#get value range
minbright=3
maxbright=$(cat /sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/max_brightness)
curbright=$(cat /sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/brightness)
device=/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/brightness
if [ ! $1 ]; then
newbright=$(DISPLAY=0:0 zenity --scale --text "set brightness" --min-value=$minbright --max-value=$maxbright --value=$curbright --step 1)
else
newbright=$1
fi
if [ $newbright -le $minbright ]; then newbright=$newbright; fi
echo $newbright > $device |
|
22 | Core | Bug Report | Low | pndevmapperd: Powerbutton / hold doesn't work. | Closed | |
Task Description
Moving the powerbutton doesn't get recognized by pndevmapperd.
When moving the powerbutton to hold, it reports:
keyboard.c: can't emulate rawmode for keycode 152 |
|
23 | Core | Bug Report | Very Low | slim-init doesn't pass session to .xinitrc | Closed | |
Task Description
It seems like slim doesn't send the session to .xinitrc
I included an "echo $1 >> ~/debug.txt" in the script and the file was completely empty.
That's why it always starts xfce4, not pmenu: The fallback is startxfce4. |
