|
245 | Core | Feature Request | Low | BugTracker: Submitter shall be able to edit bug after p ... | Closed | |
Task Description
I accidentally posted a "feature request" as a "bug report" within the FlySpray BugTracker.
I wanted to correct my mistake.
It was not possible to edit it.
I assigned the bug to myself.
Then I could edit it.
But now I cannot un-assign it from me.
I merely wanted to suggest a feature but not take development responsibility (yet).
For original submitters, who later realize a mistake in their post, there should be a possibility to correct their mistake.
Please un-assign me from #237 #241 #243 and this one #245. Thanks. |
|
248 | Core | Feature Request | Medium | Support for hibernation by caching to SD card | Closed | |
Task Description
It would be very desirable that the PandoraOS could hibernate, and that this action can easily be accessed/triggered with either a hotkey or as an action for the max-idle-time-event or lid-close-event.
That would be the battery friendly universal action to quickly pause/resume any arbitrary application/task.
The current standby mode is far to power consuming for breaks longer than ~ 1 hour. Improving standby mode to be more battery-friendly would of course be too highly appreciated and practical.
If hibernation is triggered, RAM content gets written to a special file or partition on a SD card. The boot-manager of course needs to recognize such a RAM-file on SD-cards. In case it finds more than 1, i.e.: multiple cards/partitions, the one with the newest timestamp gets priority.
256MB RAM with about 10-20 MB/s read/write time to SD, would result in 25-12 seconds for going into or out of hibernation, which would be acceptable for me. In practice it would mean, that if I quickly have to pause me OpenPandora operation (i.e. train stop), I just close my lid, and put the Pandora into my pocket (2-4 seconds), and I am then trusting that the rest reliable happens in my pocket (10-20 seconds). |
|
251 | Core | Feature Request | Low | SD Mass Storage: Possibility to host multiple volumes | Unconfirmed | |
Task Description
a) Host multiple volumes at once.
b) Select one for hosting first, later host additional ones. (I guess this scenario is more complicated) |
|
252 | Core | Feature Request | Low | Power management: If power cable is plugged ignore "Shu... | New | |
Task Description
If the power cable is plugged and the user chooses "Shutdown Pandora" from a menu, there should be a warning that this is without purpose, as the device will automatically restart.
The resulting user choices should be "Cancel shutdown" and "Shutdown nevertheless". |
|
275 | Core | Feature Request | Low | User should be a member of the cdrom group | Closed | |
Task Description
These permissions are needed for CD/DVD burning/player apps.
From bdc88595d8af726b3bf4745ece310f92299d8759 Mon Sep 17 00:00:00 2001
From: Paul Dersey
Date: Sun, 19 Feb 2012 17:22:41 -0500
Subject: [PATCH] pandora-first-run-wizard: add user to cdrom group
---
recipes/pandora-system/pandora-first-run-wizard.bb | 2 +-
.../pandora-first-run-wizard/first-run-wizard.sh | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/recipes/pandora-system/pandora-first-run-wizard.bb b/recipes/pandora-system/pandora-first-run-wizard.bb
index 904dc4a..a63dc0c 100755
--- a/recipes/pandora-system/pandora-first-run-wizard.bb
+++ b/recipes/pandora-system/pandora-first-run-wizard.bb
@@ -6,7 +6,7 @@ RDEPENDS = "hsetroot zenity dbus pandora-wallpaper-official tslib tslib-calibrat
COMPATIBLE_MACHINE = "omap3-pandora"
-PR = "r28"
+PR = "r29"
SRC_URI = " \
file://first-run-wizard.sh \
diff --git a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
index a801e3f..f30b80e 100755
--- a/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
+++ b/recipes/pandora-system/pandora-first-run-wizard/first-run-wizard.sh
@@ -88,7 +88,7 @@ while ! username=$(zenity --title="Enter your username" --entry --text "Please c
zenity --title="Error" --error --text="Please try again." --timeout 6
done
-while ! useradd -c "$name,,," -G adm,audio,video,netdev,wheel,plugdev,users "$username" ; do
+while ! useradd -c "$name,,," -G adm,audio,cdrom,netdev,plugdev,users,video,wheel "$username" ; do
username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
done
--
1.7.8.3 |
|
276 | Core | Feature Request | Low | Kernel 3.2.x: add script to activate zram | Closed | |
Task Description
Please add a script to activate zram (RAM compression) when using the new kernel. More info about how to do this is available in this post:
http://boards.openpandora.org/index.php?/topic/7844-superzaxxon-beta-3-released/#entry138834
http://boards.openpandora.org/index.php?/topic/7226-superzaxxon-beta-11-released/page__st__20#entry128665
Please be aware though that Linux-SWAT had to explicitly set a value in "/sys/block/zram0/disksize" to get it work with Slackware. Over here the following is automatically set:
pandora:~$ cat /sys/block/zram0/disksize
61648896
Sadly I can *not* change this value, even using sudo:
pandora:~$ ls -l /sys/block/zram0/disksize
-rw-r--r-- 1 root root 4096 Apr 9 12:51 /sys/block/zram0/disksize
pandora:~$ cat /sys/block/zram0/disksize
61648896
pandora:~$ sudo echo 61648888 > /sys/block/zram0/disksize
-bash: /sys/block/zram0/disksize: Permission denied
Basically the following commands are required in a startup script to automatically create the "compressed swap inside RAM" aka zram (possibly a check if the modprobe was successful makes sense as well as checking for the size of the created ramdisk):
modprobe zram
mkswap /dev/zram0
swapon -p 5 /dev/zram0 |
|
279 | Core | Feature Request | Medium | pidgin requires (more) locales to work correctly | Closed | |
Task Description
Please add the following package to allow umlauts working in pidgin:
glibc-gconv-utf-16
After installing this package I no longer have a problem receiving umlauts in pidgin. Besides it might also make sense to add "glibc-gconv-cp1250" which might be required for western europe and koi8-r which seems to be missing for xchat and conversion of chars there.
At the moment the following locale related packages are installed (as of SuperZaxxon Beta3):
glibc-charmap-utf-8 - 2.9-r35.3.5
glibc-gconv - 2.9-r35.3.5
glibc-gconv-cp1252 - 2.9-r35.3.5
glibc-gconv-ibm850 - 2.9-r35.3.5
glibc-gconv-iso8859-1 - 2.9-r35.3.5
glibc-gconv-iso8859-15 - 2.9-r35.3.5
Please add:
glibc-gconv-cp1250
glibc-gconv-koi8-r
glibc-gconv-unicode
glibc-gconv-utf-16
Thanks! |
|
288 | Core | Feature Request | Low | add functionality to inputrc | Unconfirmed | |
Task Description
Since the default inputrc doesn't contain any functionality (simple cli movements like ctrl-left or crtrl-right to skip words don't work) this diff may be useful to add to the cli-experience. I've also been trying to get the delete-key to work, but this is apparently already a known issue (see FS#227). I can remove this from the diff if you want. (I couldn't attach a file to the task somehow)
31,32c31,33
< # "\e[3~": delete-char
< # "\e[2~": quoted-insert
---
> #"\e[3~": delete-char
> "\e[^?": delete-char
> "\e[2~": quoted-insert
44,47c45,50
< # "\e[5C": forward-word
< # "\e[5D": backward-word
< # "\e\e[C": forward-word
< # "\e\e[D": backward-word
---
> "\e[1;5C": forward-word
> "\e[1;5D": backward-word
> "\e[5C": forward-word
> "\e[5D": backward-word
> "\e\e[C": forward-word
> "\e\e[D": backward-word |
|
307 | Core | Feature Request | Medium | Change how Automatic Shutdown works | Unconfirmed | |
Task Description
When thee Pandora is shutting down because its almost out of power, it should check to make sure that the nub inputs are set to the default mode (which is mouse movement for the left nub and mouse buttons for the right nub). If not, it should change them to be like that. |
|
321 | Core | Feature Request | Low | Support overriding all category fields with .ovr | Closed | |
Task Description
Currently only the main category and the first sub category of the main category can be overridden using a .ovr file while libpnd uses additional PXML supplied category date to construct the desktop file. This makes it difficult to work with PNDs that supply unwanted data in these additional fields. |
|
327 | Core | Feature Request | Low | Context menu for the XFCE menu | Unconfirmed | |
Task Description
Right now. the XFCE menu handles right clicks like left clicks. It would be more logical to either not do anything on a right click, or open a context menu that e.g. lets the user generate a link to an application on the desktop. |
|
12 | Core | To Do (Reminder) | Low | file association for .pnd | New | |
Task Description
Build the xml file and defaults.list so that pnd_run is file-assocated to .pnd |
|
13 | Core | To Do (Reminder) | Low | verify pndevmapperd is invoking scripts | Closed | |
Task Description
menu button is verified
verify power button
verify lid open/close |
|
14 | Core | To Do (Reminder) | Low | Add hup of pndnotifyd to .xinitrc | Closed | |
Task Description
Pretty minor risk, but if the guy creates multiple accounts on the machine, and logs out of one and into another .. we'll want to hup pndnotifyd
Alternative solution is to poll utmp (or inotify on utmp?) to watch for logins and handle it magicly. |
|
29 | Core | To Do (Reminder) | Low | ToDo: Map Fn-U and Fn-I with brightness controls | Closed | |
Task Description
Include brightness change hotkeys. |
|
34 | Core | To Do (Reminder) | Low | Add software mixer to ALSA | Closed | |
Task Description
Some headphones are very loud. The volume wheel cannot be used properly with them.
Therefore, we should be able to change the volume in software mode, too.
File attached below, simply needs to be included in the next image by DJWillis. |
|
47 | Core | To Do (Reminder) | Medium | evmapperd: Blinking LED and charging control | Closed | |
Task Description
evmapperd should start blinking when the power is getting low.
Ideally, the blinking speed should increase with decreasing battery power and should start maybe at 5% as default (would be nice to have the settings configurable by the user).
As soon as the AC adaptor is connected, blinking should stop.
When the battery power is at 0% it should immediately shutdown and poweroff (NOT to be overridden by the user!)
Aditionally, we should have some charging control (or would it be better using a different daemon for that?)
Here's part of my conversation with MichaelW:
when the charge current was below a threshold, it would reduce the charger input current allowed and take it down to about what the system needs
it would be an active thing constantly sampling the system and constantly updating the input current to match the system
the alternative is that when the battery is full, the charge path is cut off until the battery drops down a bit, maybe 90% |
|
48 | Core | To Do (Reminder) | Low | Create the TV Out Enable / Disable scripts | Closed | |
Task Description
The commands do exist, I just need to wrap them round some zenity scripts. |
|
49 | Core | To Do (Reminder) | Low | Change some of our scripts into internal PNDs | Closed | |
Task Description
Some of our scripts (CPU Speed, Switch Default GUI, Enable TV Out) should be changed into PND format so that pmenu can also run them. |
|
50 | Core | To Do (Reminder) | Medium | pmenu: Add shutdown / logout | Closed | |
Task Description
There's no way yet to shutdown (poweroff) or logout from pmenu yet. |
|
59 | Core | To Do (Reminder) | Low | ToDo: Add joystick / keyboard switch to pnd_run and lib ... | Closed | |
Task Description
The next kernel offers switching between a joystick / keyboard mode.
In joystick mode, the DPAD and ABXYRL Buttons behave like a joystick buttons and have no keyboard mappings.
In keyboard mode, the DPAD and ABXYRL Buttons have keyboard mappings and are NOT registered as joystick.
The normal keyboard keys are not affected by this.
PXML needs to have a switch added for that and pnd_run should change the mode according to that switch.
When the PND app has quit, it should always go back to keyboard mode.
The commands are the following:
echo 1 > /proc/pandora/game_button_mode # keyboard mode
echo 2 > /proc/pandora/game_button_mode # gamepad mode |
|
60 | Core | To Do (Reminder) | Low | Include new menufile (Setting) for XFCE4 | Closed | |
Task Description
I just built a nice menu file which features subdirectories for games and emulators :)
I attached it, the old one should be replaced:
/etc/xdg/menus/xfce-applications.menu |
|
62 | Core | To Do (Reminder) | Low | New xmodmap to include into latest image | Closed | |
Task Description
This is just the latest xmodmap, based on the latest map notaz released.
Both maps (xmodmap and notaz' console map) are attached.
Path in the image:
/etc/skel/.pndXmodmap
/etc/keymap-extension-2.6.map |
|
63 | Core | To Do (Reminder) | Low | Include new panel-setup for XFCE4 | Closed | |
Task Description
I enhanced the XFCE4-Panel setup a bit, since we now have working ALSA mixer and a battery monitor.
The files inside the attached archive should go to
/etc/xdg/op/xfce4/panel/*
in the image. |
|
64 | Core | To Do (Reminder) | Low | New power-manager.xml-file (removes opening the logout ... | Closed | |
Task Description
As the powerswitch is used to go into low power mode or shutdown, it doesn't make sense showing the logout dialogue (which would appear when you come back from low-power mode).
Therefore, I disabled it with this file.
It should be placed in:
/etc/xdg/op/xfconf/xfce-perchannel-xml/
in the image. |
|
70 | Core | To Do (Reminder) | Low | Make switching GUIs more customizable (hardcoded at the ... | Closed | |
Task Description
At the moment, /usr/pandora/scripts/op_switchgui,sh ,/usr/pandora/scripts/op_defaultgui.sh and /usr/pandora/scripts/first-run-wizard.sh are hardcoded with the GUIs we have.
I'd like to have that configurable for the future.
My current plan is having a config file with all the GUIs in (e.g. /etc/pandora/gui.conf)
In there, there should be ALL GUIs:
"XFCE4";"startxfce4";"xfce4-session-logout --logout"
"Netbook Launcher";"startnetbooklauncher";"killall netbook-launcher-efl"
"PMenu";"pmenu";""
So with an info:
a) What's the name of the GUI
b) How to start it
c) How to stop it (if it doesn't do that itself)
Therefore, various GUIs could be implemented and switched with the Switch GUI script by simply adding it to the config file.
Ideally, all GUIs should either have a shutdown script (so I don't have to kill it to quit it) or react properly on a simple terminate
command :)
Or they could do it themselves, read out the config file, show up the different GUIs we have, change the /tmp/gui.load file and quit.
Any more ideas?
Any help? Coding that script shouldn't be too hard, the only thing I don't know at the moment is how to parse various config lines (as above) into a shell script :)
vimacs, any idea there? |
|
175 | Core | To Do (Reminder) | Very Low | Test | Closed | |
Task Description
Test if the edit button in the bug tracker works now. //Edit: Blah |
|
261 | Core | To Do (Reminder) | High | Overview of all current KEYBOARD INPUT related issues | Unconfirmed | |
Task Description
Built-in keyboard input is a central thing on the Pandora, as it concerns almost all user interfaced apps!
I realized that I myself and also others submitted quite many reports concerning this issue.
Hence this meta issue is intended as an overview/accumulation/aid for those devs who are willing to overwork the whole issue.
If you realize new related issues, feel free to add them here.
If this my effort is contradicting the OpenPandora workflow, then pardon me, and instruct me, how else to handle issues of that kind. Thanks!
Keyboard low level: Driver, keyboard layout, post processing (hotkeys, input support, etc)
FS#138 FS#227 FS#242 FS#259
Keyboard mid level: Application interfacing
FS#102 FS#123 FS#238
Keyboard application internal level
FS#157 (dupe: FS#249 ) FS#243 FS#256 |
|
82 | Base OS | Bug Report | Critical | Network Manager - Wifi Can't Reconnect | Closed | |
Task Description
When wifi drops out, or you have disconnected from it and wish to reconnect, you cant reconnect using network-manager.
The connecting icon spins for a while, then it pops up the 'Password' Dialog. If you enter your password, the cycle begins again. |
|
83 | Base OS | Bug Report | Low | getting more /media/mmcblk?p1 | Closed | |
Task Description
From a conversation with skeezix:
I'm seeing /media/mmcblk0p1, mmcblk1p1, mmcblk2p1, mmcblk3p1 and mmcblk4p1 - is that something I should worry about? This started after I inserted & ejected my sd card a couple of times.
To which skeezix said:
The system starts at /media/mmcblk0 (with p1 ec being the partition number); if you eject the SD, then stick it back in, it will try to go to the earlier number again, but if some process was watching that SD when you ejected it, the system will nto be able to recycle that number, so you get the next blk number. So if you end up with /media/mmcblk5p1 (say), then it means you've been eject/inserting, and some program or another has been watching the SD instead of letting it go.
Isn't it nicer to cleanup the ones above 1 (so 0 and 1 are there) at startup to avoid confusion? |
|
89 | Base OS | Bug Report | Medium | XFCE not loading up defaults when MiniMenu is selected ... | Closed | |
Task Description
When mini menu is set to the default menuing system, XFCE settings (selected theme, pandora-specific key bindings) do not get loaded by default, they need to be forced by opening a terminal and typing xfwm4 --replace |
|
91 | Base OS | Bug Report | Medium | libaudiofile is installed by codec pack instead of in b ... | Closed | |
Task Description
Certain emulators such as Fuse are reliant on this file and I am assured it should be part of the default load-out (or rather in the HotFix) rather than in the codec pack as it's not a copyright issue. |
|
92 | Base OS | Bug Report | Medium | Startupmanager | Closed | |
Task Description
When trying to toggle
Enable/Disable Autologin
After initially enabling this feature, attempt was made to disable unsuccessfully.
System says that it saves this info, upon reboot, login screen shows up again.
Wifi toggle seems to work, as does Default GUI, & selecting default user |
|
93 | Base OS | Bug Report | Low | zaxxon first boot: don't ask for user prompt if already ... | Closed | |
Task Description
How to reproduce:
First boot, Pandora's Box has been opened. Prompt for Full name, username, and password.
Then, simply press OK without selecting whether minimenu or xfce. None selected. Then you can't do any more. Wizard closes and you don't need any more options.
After manual reboot, the wizard starts again and asks for name again. But the username already exists. |
|
95 | Base OS | Bug Report | Medium | Cannot Connect to Ad-Hoc WIFI | Closed | |
Task Description
I am Currently tethering my Mobile Network via my Android Phone
I cannot connect on this WIFI ... it's a Ad-Hoc connection
Everything else works, PC, Netbook's and iPod Touch
But Pandora seems to have some problems |
|
102 | Base OS | Bug Report | Very Low | Pandora key does not close XFCE menu | Closed | |
Task Description
If the XFCE menu has been opened by a touchscreen command, it can also be closed by hitting the logo again. However, opening the menu this way and then hitting the Pandora key only spawns more instances of the menu. Least intrusive way to close those seems to be to select "Logout" and hit Cancel. |
|
104 | Base OS | Bug Report | Low | AAC decoder libfaad doesn't appear to be compiled as fi... | Unconfirmed | |
Task Description
FAAD2 appears to not be compiled with fixed point decoding. My version of libfaad compiled with fixed point used 2-3x less cpu than the provided one. It's not enough to provide the switch to the configure script. the file libfaad/common.h has to be edited and a define uncommented. Line 68 in the v2.7 source.
/* COMPILE TIME DEFINITIONS */
/* use double precision */
/* #define USE_DOUBLE_PRECISION */
/* use fixed point reals */
//#define FIXED_POINT |
|
107 | Base OS | Bug Report | Low | Secure Wifi will not connect until XFCE is loaded | Closed | |
Task Description
My Pandora is set to load MiniMenu on boot. I can't use any networked apps because wifi will not automatically connect on boot. XFCE needs to be loaded at least once so that i can enter my keychain password. Once i've entered my password Wifi connects and i can return to MiniMenu. |
|
115 | Base OS | Bug Report | Medium | OS is missing libvorbisidec.so | Closed | |
Task Description
Please add to next hotfix, srb2 needed this file. My temporary hack was to modify the LD_LIBRARY_PATH (didnt like having to so this, but I think the way srb2 is loading the library it wouldnt work without it) and include the library in the pnd.
Once this lib is added ill do an update on srb2 and remove the LD hack. |
|
120 | Base OS | Bug Report | Medium | Python is missing some modules | Closed | |
Task Description
It seems like Python is missing some modules (like cgi) which should be included in the base installation. |
|
121 | Base OS | Bug Report | Medium | PyGame Hardware support | New | |
Task Description
PyGame is damn slow (games with scrolling are not at all playable).
Would be nice if Hardware surface could be used :) |
|
124 | Base OS | Bug Report | Low | ifup doesn't like dhclient | Unconfirmed | |
Task Description
I added:
iface usb0 inet dhcp
And ran:
ifup usb0
But dhclient simply prints usage. |
|
129 | Base OS | Bug Report | Medium | [PATCH] bluetooth script fails to store/restore bluetoo ... | Closed | |
Task Description
Patch to op_bluetooth.sh attached. |
|
132 | Base OS | Bug Report | Medium | Deleting big files doesn't work | Closed | |
Task Description
When deleting a file on the SD card, the Pandora OS moves it into the thrash folder in the internal memory. That itself isn't very nice (shouldn't there be a trash folder on the SD card as well, to reduce unnecessary copying?), but if the file is too big for the internal memory, a error message appears, and the file cannot be deleted on the Pandora directly. |
|
139 | Base OS | Bug Report | Low | Space should not be accepted in hostname | Closed | |
Task Description
http://www.gp32x.com/board/index.php?/topic/54878-embarassingly-nooby-questions-from-a-new-pandora-owner/page__view__findpost__p__885235
If the user names their Pandora using a space in the name, "This will prevent Xfce from operating correctly". Should trap this when asking for a host name. |
|
141 | Base OS | Bug Report | High | When using an unlabeled SD card, Hotfix3 final can't un ... | Closed | |
Task Description
I had beta 1 of hotfix 3, and there turning the pandora into a cardreader worked fine for that card. However, I just installed the latest hotfix 3 final, but that one fails to unmount. Attached is the pndrunop_storage.out. Apparently something's going wrong with the splitting of the partition name, as it tries to unmount /dev/mmcblk0 instead of /dev/mmcblk0p1
Manually unmounting it by using sudo umount /dev/mmcblk0p1 does work, but then I can't use the tool because that apparently only lists mounted memorycards. |
|
146 | Base OS | Bug Report | High | Minimenu regressions with Hotfix 3 | Closed | |
Task Description
Fresh firmware install with Hotfix 3 installed results in the following issues with Minimenu.
1. 25+% cpu usage versus ~5% in earlier versions.
2. Touchscreen no longer works correctly to select icons. Selecting tabs still works and occasionally it will work for selecting an application icon, but for the most part it simply does nothing. |
|
147 | Base OS | Bug Report | Low | Screen backlight is ON when starting with lid closed | Closed | |
Task Description
[HotFix3 installed]
If you power up the Pandora and have the screen closed, the backlight will still go on. That should not happen. Right now you have to open it, close it and than the backlight turns off to save energy... |
|
149 | Base OS | Bug Report | Very Low | Resets if Battery is removed - but power is still pluge ... | Closed | |
Task Description
The Pandora resets if the battery is removed - even though its plugged to the AC Adapter.
the power disapears for a second, and then the pandora notices that the power cable is actually plugged in, and immediately starts the pandora again |
|
158 | Base OS | Bug Report | Medium | Refresh rate and BPP | Unconfirmed | |
Task Description
On OS Zaxon (hotfix 3).
With "xfconf-query", the resolution is 800x480@60 Hz.
But with the tool in the menu "Settings" -> "Display", the resolution is 800x480@0 Hz.
With Java (opensdk-6-jre 6b18-1.8),
GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayModes()
return 1 display mode that is 800x480@0 Hz with a BPP of -1.
It seems to be the reason that GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayMode() return null
and when closing a java application that goes in fullscreen mode to throw an exception (invalid display mode). |