|
300 | Core | Bug Report | Low | SuperZaxxon interprets on-disk FAT32 filenames differen... | Unconfirmed | |
Task Description
With SuperZaxxon Final, I've noticed that stuff running on the Pandora like Thunar and bash are seeing a different interpretation of filenames on disk than when I remove the SD card and insert it into my desktop PC.
Specifically, the following two mismatches appear to be present when using a FAT32-formatted SD card:
First, the Pandora's VFAT support seems to be be operating with different case-handling settings than desktop Linux distros.
Filenames set in all uppercase are forced to all-lowercase on the Pandora (whether they're set on the desktop or the Pandora) but inserting the card into a PC reveals that the. All-lowercase filenames set by software on the Pandora risk appearing in all uppercase when the card is inserted into a PC. (I think the grsync PND is what created the files in question)
Among other things, this forces me to use EITHER the PND-based copy of grsync over the network OR a desktop-based copy of rsync with an SD card reader but not both because the kernel will preserve case differences like ALBION.BAT vs. albion.bat but rsync think they are separate files. (resulting in Flash-killing, time-wasting deletion and re-creation)
It also makes for irritating entries like "zzt" in DOSBox or "ddr" in PyDance where I can't capitalize the filename properly without employing Department of Redundancy Department with "DDR Songs" or "ZZT.The.Game" as an excuse for mixed case.
Second, SuperZaxxon Final seems to be using a different (though still Unicode-capable) filename encoding than all the desktop distros I've tried.
Filenames are preserved properly and all-ASCII filenames are displayed properly in all cases, but any non-ASCII characters appear as gibberish on whichever system was not used to set them.
I've confirmed this problem with these two filenames:
- 03 - The Foggy Dew with Sinéad O'Connor.flac
- Lucky Star - Native Misao (Touhou - Native Faith) ???????????????????×??????.mp4
As a Canadian user, my desktops use the "en_CA.utf8" locale and the only other distros I've found which have this problem are Slax and the 1.0 release of its successor, Porteus, both of which use ISO-8859-1 (latin1) for filenames. |
|
277 | Core | Bug Report | Medium | SuperZaxxon B3: minimenu does not scan all folders | Closed | |
Task Description
Using SuperZaxxon beta3 (already observed it with beta2) it seems as if minimenu is not scanning all folders (and subfolders) correctly. Please have a look at this post for more information:
http://boards.openpandora.org/index.php?/topic/7558-superzaxxon-beta-2-released/page__st__140#entry138597 |
|
324 | Core | Bug Report | Low | Sticky keys setting for shift key disabling itself afte... | Unconfirmed | |
Task Description
The sticky keys option is disabling itself for the shift key. It continues to work with the left shoulder button though.
Unfortunately I have no idea what triggers the sticky option to be disabled. Sometimes it happens after 1-2 minutes, sometimes it takes longer.
I would also like to point out that using the shoulder button instead of the shift button it _not_ an option! This issue has been reported in the forums, but apperantly was never fixed. |
|
195 | Core | Feature Request | High | Start re-recharge of battery sooner | Closed | |
Task Description
Increase battery LVL_4 and LVL_3 threshold.
After reaching 100%, in some cases the charge circuit enters "battery full" state, stops charging, and begins to discharge. This is not entirely unexpected behavior according to the spec sheet, although I don't fully understand exactly the situations in which it completes charging. Once the battery is full, the battery will begin discharging. The charge circuit automatically restarts the recharge once the voltage has gone below a certain level (crosses below the LVL_3 voltage threshold)
The default LVL_3 voltage threshold is 3.902 volts which is at about 80-85% battery level as recorded by bq27500 chip. In my opinion, this is way too low.
Setting the BCIMFTH2 register to 0xCB increases the voltage threshold to about 4.003 volts which is about 93%.
Setting it to 0xDC may also be worthwhile, which is just over 95%.
By default, if a user leaves their Pandora plugged in overnight, they may wake up to find their Pandora has stopped charging and the capacity has dropped to almost 80%, which can be quite startling to some users who will then report it as a bug.
This change will ensure that it never drops below 93-95%, a much more acceptable level.
Specific code changes suggested, in the /drivers/power/twl4030_bci_battery.c file, somewhere in the twl4030_bci_battery_probe function (or a function called by it), add the lines:
/********************************/
#define KEY_FTH2 0x7F
#define REG_BCIMFTH2 0x017
ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, KEY_FTH2, REG_BCIMFKEY);
if (ret)
return ret;
ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, 0xDC, REG_BCIMFTH2);
if (ret)
return ret;
/********************************/
(Move defines to the top, as appropriate) |
|
312 | Core | Bug Report | Low | Special character in password | Closed | |
Task Description
problem:
setting a username and password using first setup wizzard it's possible to set special character like @#*%/ ect...
the login manager don't support this characters, so you need to reset the device.
possible solution:
1. disable the possibility of setting special characters.
2. implement special characters in login manager. |
|
337 | Core | Bug Report | Low | SPAM | Closed | |
Task Description
SPAM |
|
18 | Core | Bug Report | Medium | Some errors in first-run-wizard.sh | Closed | |
Task Description
Line 154 and 157 need to be changed:
153 if [ $launcher == "xfce" ]; then
154 sed -i 's/.*sessions.*/sessions xfce4,pmenu/g' /etc/slim.conf
155 echo Xfce selected as default interface
156 else
157 sed -i 's/.*sessions.*/sessions pmenu,xfce4/g' /etc/slim.conf
158 echo PMenu selected as default interface
159 fi
They should be:
154 sed -i 's/.*sessions .*/sessions xfce4/g' /etc/slim.conf
157 sed -i 's/.*sessions .*/sessions pmenu/g' /etc/slim.conf
Note the empty space behind sessions. :) |
|
23 | Core | Bug Report | Very Low | slim-init doesn't pass session to .xinitrc | Closed | |
Task Description
It seems like slim doesn't send the session to .xinitrc
I included an "echo $1 >> ~/debug.txt" in the script and the file was completely empty.
That's why it always starts xfce4, not pmenu: The fallback is startxfce4. |
|
209 | Core | Feature Request | Medium | Shutdown after a full charge | Unconfirmed | |
Task Description
That still need to be configurable, but chris_c does a good job I'ld like to see integraded in the main image :
http://www.gp32x.com/board/index.php?/topic/58794-a-script-to-shutdown-after-charging/
and :
http://chrisc.bedroomcoders.co.uk/?p=77 |
|
77 | Core | Bug Report | Low | Shut down screen | Closed | |
Task Description
The shut down screen says "booting...". :) |
|
254 | Core | Bug Report | High | Several apps leave graphical artefact overlay (ghost) a ... | Closed | |
Task Description
After quitting some apps, their last graphical output remains on the screen, which covers a large area of the Pandora, and therefore makes it quite unusable, so that only a full restart resolves this issue.
As this happens in many apps (Mednafen-GB, Dark Light Battles, etc) this must be a problem within a shared library (driver, graphics lib, window manager framework, or similar). |
|
202 | Core | Bug Report | Low | Set Date and Time won't let you cancel or close | Closed | |
Task Description
The Date and Time application in MiniMenu by won't let you use the cross or the cancel button to close the application without changing anything.
If you use one of those buttons then a new window opens that says: "Error: Please select a timezone" and equally so for the date and time. |
|
230 | Core | Bug Report | Low | Second SD slot not working in future kernel version 2.6 ... | Closed | |
Task Description
Sorry, not sure where to log this bug. I have confirmed with aTc on freenode, that SD slot #2 does not work on kernel version 2.6.37 from the openpandora git.
Happy to test anything and reports results. |
|
251 | Core | Feature Request | Low | SD Mass Storage: Possibility to host multiple volumes | Unconfirmed | |
Task Description
a) Host multiple volumes at once.
b) Select one for hosting first, later host additional ones. (I guess this scenario is more complicated) |
|
329 | Core | Bug Report | Low | Screen turns on when LCD closed | Unconfirmed | |
Task Description
Issue: The screen accidentally turns on even when the lid is closed.
How to reproduce: "Screen blanking" must be enabled! Close the lid, wait more than 10 minutes, tap either shoulder button. This behaviour happens whether on charge or battery, at the desktop or running an application, provided that the "screen blanking" option is enabled.
Desired outcome: When the Pandora comes out of "screen blanking", it should restore the brightness to the same value that it was before blanking. |
|
1 | Core | Bug Report | Very Low | Sample Task | Closed | |
Task Description
This isn't a real task. You should close it and start opening some real tasks. |
|
299 | Core | Bug Report | Low | run_pnd.sh does not follow PXML.xml or "-d"-Parameter | Assigned | |
Task Description
I call pnd_run.sh with a pnd. The application directory will invariably be /media/SD/pandora/appdata/, no matter if the PXML.xml specifies a different appdata path. Also, the parameter -d for run_pnd.sh is not followed, either.
I tried with vlc.pnd from the app store and with Dosbox74.pnd.
UPDATE: Original submission contained a wrong filename reference. Corrected that typo to the filename intended by the submitter. Admin: porg. |
|
291 | Core | Bug Report | Medium | root-owned pndrun_...out file makes PND refuse starting | Assigned | |
Task Description
If a PND has been run as root before (using pnd_run.sh from a root shell) and afterwards it is invoked the normal way, the PND doesn't start, because the .out file cannt be overwritten:
/usr/pandora/scripts/pnd_run.sh: line 26: /tmp/pndrun_firefox.out: Permission denied
Desired solution:
.out file is silently overwitten.
Maybe, if that's not possible, create another .out file with a different name (added counter, for example).
Seen in SuperZaxxon relese 1.5, not in Beta3 as this task is flagged, but there is no choice besides Beta3. |
|
190 | Core | Bug Report | Medium | Removing desktop-shortkeys does not work | Unconfirmed | |
Task Description
Try clearing shortcuts in Start->Settings->Window Manager->Keyboard. That doesn't work (for me).
This is a problem because these shortcuts are blocking key-combination in apps, like for example the keymapper in dosbox (CTRL+F1) or refreshing content (CTRL+F5). I tried manual editing or even deleting the configuration file, but changes are not recognized and the file recreated on reboot. |
|
136 | Core | Bug Report | High | rather high battery discharge while Pandora is powered ... | Closed | |
Task Description
The Pandora does seem to use too much energy while it is turned off. A testcase: The pandora was turned off over night (about 8 hours) and battery state dropped from 98% to 96%. When removing the battery from the pandora for the same amount of time, the state is not changed at all.
This is based on the zaxxon firmware release with hotfix3, beta2.
Problem: if you don't use the pandora for a while and forget to remove the battery you can cause a deep discharge which might damage the battery. This is also a problem if the Pandora does eg shutdown itself since power is out and you can't directly attach it to a charger.
Possible causes:
* Design fault in the board.
* Too much powered on while the device *should* be completely powered off. The only things that should get power are the clock and the power button. This should basically not drain much.
Regarding the clock: The PalmPre is based on the OMAP3, too. There you basically have no discharge when it is powered off, so it is unlikely that the fault is in the OMAP3 itself. |
|
25 | Core | Bug Report | Medium | QWERTY Slowdowns | Closed | |
Task Description
Cleaned up a bit according to everything we know.
EDIT: notaz did it again. Fixed it. If you find any weird side effects, let us know :)
http://notaz.gp2x.de/tmp/Xorg
Replace the file /usr/bin/Xorg
Be sure to change permissions to 755
Switching between DPAD and keyboard does increase CPU usage on X A LOT. It even tends to crash ALSA if done too extensive.
According to notaz, this is due to some very old crap that's still included in X.
Internally it has one mouse and one keyboard, everything else is copied every time you press a key and bunch of callbacks are called, messages are sent to all screens and windows.
New tests from EvilDragon:
Disabling xfwm4 makes things better (ALSA won't crash anymore), but it still lags. Running it in minimal X (directly from .xinitrc) strangely fixes this - X won't eat up more than 17% CPU,
regardless how many buttons you press.
OLD Entry:
The qwerty controls when pressed are causing the system to slowdown making the application running to pause/delay. Ive seen in a least 2 application glquake and supertux. For example pressing space would cause the hiccups and shortly after the pressing stopped the application would regain normal running speed. The other joystick/nub controls work fine. glquake is getting controls direct from the event files. Supertux is using the SDL layer.
This was done on angstrom image from dec 19th.
EDIT: More tests done by EvilDragon with the latest image (pandora-xfce-image-omap3-pandora-20100102-new-kernel-fn-n-m-support.tar.bz2)
When you play with the DPAD and press a keyboard button, the app is making the small pause. You can press as many keyboard buttons as you want after that, there won't be another pause.
BUT as soon as you press the DPAD again, it pauses again. Then the next pause does happen when you press a keyboard button, etc.
So it feels like it pauses when you switch between DPAD and keyboard.
The most important thing: This only happens when you run SDL Games from X. It doesn't occur when running SDL games from the console. |
|
168 | Core | Bug Report | Low | qt-embedded doesn't work | Closed | |
Task Description
qt-embedded doesn't work |
|
194 | Core | Bug Report | Low | python ctypes broken (and fix) | Closed | |
Task Description
run python and type import ctypes
cant find _ctypes it says....
for further details and a fix see
http://www.gp32x.com/board/index.php?/topic/57102-python-ctypes-stopped-working/ |
|
303 | Core | Bug Report | Low | pppd 2.4.3 has a bug, recommend upgrade to ppp 2.4.5 | Closed | |
Task Description
pppd 2.4.3 doesnt auto reconnect (in my setup) even if configured to do so (persist). Found a ppp bug report confirming this ( http://ppp.samba.org/cgi-bin/ppp-bugs/resolved?id=1110;user=guest - "ppp-2.4.3 / pppoe not reconnecting") and that it has been fixed. I compiled pppd 2.4.5 and that reconnects just fine. |
|
270 | Core | Bug Report | Very Low | Power-slider & lid-close events: XFCE observes user set... | New | |
Task Description
STATUS QUO:
If you are in XFCE and hold the power slider for 3 seconds, you thereby trigger the shutdown command.
For 3 more seconds a dialogue box gives you the chance to abort the shutdown ("Shutting down in 3…2…").
Now in MiniMenu no direct shutdown key is available. You first have to quit the running app (via PANDORA key), then call up the menu (via SELECT key), and then navigate to "Shutdown" and confirm it (by B or ENTER).
INQUIRED BEHAVIOR:
1) Thanks to the very recent MiniMenu speedups, these 4 consecutive user interaction steps can now at least be be executed a lot faster.
Nevertheless, offering a 1-button-interaction (via power slider) too, would be nice. Could you please make that available to MiniMenu?
And in general: Make this power-slide-event available to any possible GUI, so that not each GUI has to implement this by itself, but rather the OS catches this event and handles it uniformly, except if a certain GUI WANTS to establish an exception to the rule.
2) Also the "Lid-Close-Settings" seem to be ignored by MiniMenu. MiniMenu seems to have the action "Turn off screen" hardcoded to that event. Please make MiniMenu observe the user settings from "Lid-Close-Settings".
RELATED SOURCE CODE FILES (to my knowledge):
op_lid.sh
op_power.sh
op_bright_up.sh
op_bright_down.sh |
|
252 | Core | Feature Request | Low | Power management: If power cable is plugged ignore "Shu... | New | |
Task Description
If the power cable is plugged and the user chooses "Shutdown Pandora" from a menu, there should be a warning that this is without purpose, as the device will automatically restart.
The resulting user choices should be "Cancel shutdown" and "Shutdown nevertheless". |
|
247 | Core | Bug Report | Low | pnd_make.sh can't handle PND with spaces in the path | Closed | |
Task Description
pnd_make.sh can't handle PND with spaces in the path. For example, if the label of the volume where the PND is saved, has spacebars.
The Problem is line 655:
655: PND=$(readlink -f $PND)
Bash handles a path with spacebars as two seperate arguments for the readlink command.
The problem is, that i don't know a solution for this problem. |
|
32 | Core | Bug Report | Low | pndnotifyd: Crawling through directories it shouldn't i ... | Closed | |
Task Description
My current configuration is:
Rootfs on first SD Card, 2nd partition.
If I put my WIZ SD Card with tons of files into the second SD Slot while booting, pndnotifyd eats up about 95% of CPU time.
After about 8 - 9 minutes, it stopped eating the CPU and the system is working normally.
This doesn't happen when I put in the card when XFCE4 is already running.
Using LSOF, I can confirm it's crawling where it shouldn't:
pndnotify 1825 root 6r DIR 179,9 1441792 62488 /media/mmcblk1p1/roms/c64/Tapes
Could it be that on first initialization it hasn't loaded the config and crawls through the whole SD Card?
On a side note: I got 44700 files on that SD Card... so if it needs about 8 minutes, that does mean it can do over 5000 files a minute! |
|
128 | Core | Bug Report | Medium | pndnotifyd Segfault | Closed | |
Task Description
pndnotifyd Segfault when the PXML.xml attached with th pnd contain non-ascii characters (for translation) |
|
150 | Core | Bug Report | Low | pndnotifyd Segfault | Closed | |
Task Description
Might be related to http://bugs.openpandora.org/index.php?do=details&task_id=128
as it have exactly the same behaviours.
But this time no translation is involved (masked in my script until this is fixed).
And making the file smaller (by removing apps :( ) managed to let it alive, so it seam to be file size related. |
|
2 | Core | Bug Report | High | pndnotifyd | Closed | |
Task Description
pndnotifyd needs to be restarted before it works (tested in image 2009-12-21)
This can manually be fixed by installing two packages:
http://www.angstrom-distribution.org/unstable/feed/armv7a/base/sessreg_1.0.4-r0.2_armv7a.ipk
http://djwillis.openpandora.org/pandora/packages/pandora-libpnd_1.0-r12.5_armv7a.ipk
And adding to lines to slim.conf:
sessionstart_cmd /usr/bin/sessreg -a -l $DISPLAY %user
sessionstop_cmd /usr/bin/sessreg -d -l $DISPLAY %user |
|
22 | Core | Bug Report | Low | pndevmapperd: Powerbutton / hold doesn't work. | Closed | |
Task Description
Moving the powerbutton doesn't get recognized by pndevmapperd.
When moving the powerbutton to hold, it reports:
keyboard.c: can't emulate rawmode for keycode 152 |
|
20 | Core | Bug Report | Low | pndevmapperd: op_lid.sh / op_lidtoggle.sh | Closed | |
Task Description
pndevmapperd tries to run /usr/pandora/scripts/op_lidtoggle.sh, however, the filename is /usr/pandora/scripts/op_lid.sh
Either rename the file or change the call ;) |
|
26 | Core | Bug Report | Medium | pndevmapperd only works when manually started | Closed | |
Task Description
Though pndevmapperd runs after booting (ps -A lists it), it doesn't react to anything.
EDIT: It DOES do something. It creates defunct op_menu.sh with each press.
When you run it manually from the terminal, the menu button works find and shows the appfinder. |
|
189 | Core | Bug Report | Medium | pnd-run.sh does not work correctly for very long <pathn ... | Closed | |
Task Description
When unmounting, the pnd-run-script greps the output of "losetup -a" at some point. But if you have a very long pathname and filename for the pnd (like "/media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_EN.pnd" then the endpart is cut off in the output, grep can't find the right part and the script get's confused.
Example:
mounting works:
/usr/pandora/scripts/pnd_run.sh -p /media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_EN.pnd -b scummvm -m
unounting does not work:
/usr/pandora/scripts/pnd_run.sh -p /media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_EN.pnd -b scummvm -u
(see /tmp/pndrun*-logs for output)
The problem is that the outut of losetup looks like this in such a case:
"/dev/loop7: [b309]:157081 (/media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_*)"
And because the pnd-name is not fully shown, grepping the name does not work. After i renamed th pnd to a much shorter name (somi_amiga_en.pnd) it worked nicely. Still this should be fixed. |
|
201 | Core | Bug Report | High | PND apps still use memory after they've quit | Closed | |
Task Description
After running and quitting a PND app, not all of the used memory is being freed.
This eats more and more memory over time. Just run 5 or 6 apps and you only have half of the memory left.
Sounds like either aufs or unionfs don't free the memory after unmounting.
This has been reported with HF4 and still is the case with HF5 Beta 2
-- downgraded to 'Researching' and 'Normal' priority until confirmed and details found |
|
46 | Core | Bug Report | Medium | pmenu: MediaPlayer only shows ~/ | Closed | |
Task Description
The mediaplayer only does show the ~/-Directory.
Ideally, it should present SD1 / SD2 / Users Home. |
|
50 | Core | To Do (Reminder) | Medium | pmenu: Add shutdown / logout | Closed | |
Task Description
There's no way yet to shutdown (poweroff) or logout from pmenu yet. |
|
28 | Core | Bug Report | High | pmenu only shows preview pictures when selecting the PN ... | Closed | |
Task Description
When selecting a PND for the first time, it only shows a red X.
When selecting the PND for the second time, it shows the preview picture. |
|
9 | Core | Bug Report | High | pmenu doesn't work | Closed | |
Task Description
Running pmenu leads to:
ERROR: config_read_file() failed: skins/Platinum/skin.cfg (line 21 of config skin.c)
(config_skin.c:22)
ERROR: cfg_gui_read failed, exiting... ( main.c:1517) |
|
40 | Core | Bug Report | Low | pmenu doesn't show screenshots | Closed | |
Task Description
I did create some PXML files which have screenshots included.
pmenu seems to ignore them, it just shows a red X. |
|
220 | Core | Feature Request | Low | Please include /usr/bin/xkbset | Closed | |
Task Description
One of the first things after installing HF5 was downloading xkbset, because it is necessary for proper L-R buttons mapping as mouse buttons. Could you please include that in the system?
I am using urjaman's executable from here:
http://www.gp32x.com/board/index.php?/topic/55124-remapping-the-mouse-buttons-etc/page__st__15__p__896576&#entry896576
Even better would be a GUI that allows mapping of L-R buttons for mouse, just like GUI for nubs :) But including xkbset will be already good. |
|
134 | Core | Bug Report | Low | please add a working phonon backend | Closed | |
Task Description
Please see : http://www.gp32x.com/board/index.php?/topic/54831-minitube/page__view__findpost__p__883993
:) |
|
279 | Core | Feature Request | Medium | pidgin requires (more) locales to work correctly | Closed | |
Task Description
Please add the following package to allow umlauts working in pidgin:
glibc-gconv-utf-16
After installing this package I no longer have a problem receiving umlauts in pidgin. Besides it might also make sense to add "glibc-gconv-cp1250" which might be required for western europe and koi8-r which seems to be missing for xchat and conversion of chars there.
At the moment the following locale related packages are installed (as of SuperZaxxon Beta3):
glibc-charmap-utf-8 - 2.9-r35.3.5
glibc-gconv - 2.9-r35.3.5
glibc-gconv-cp1252 - 2.9-r35.3.5
glibc-gconv-ibm850 - 2.9-r35.3.5
glibc-gconv-iso8859-1 - 2.9-r35.3.5
glibc-gconv-iso8859-15 - 2.9-r35.3.5
Please add:
glibc-gconv-cp1250
glibc-gconv-koi8-r
glibc-gconv-unicode
glibc-gconv-utf-16
Thanks! |
|
169 | Core | Bug Report | Low | pidgin freezes all the time | Closed | |
Task Description
pidgin freezes all the time |
|
71 | Core | Bug Report | Low | Permissions of omapdss need to be fixed | Closed | |
Task Description
Only root can currently setup and change TV Out parameters :)
Should be set to make it user-changeable. |
|
3 | Core | Bug Report | High | Permissions for brightness and CPU Speed | Closed | |
Task Description
/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/brightness
/proc/pandora/cpu_mhz_max
Those values cannot be changed by the user, only by root.
Should be changed. |
|
10 | Core | Bug Report | High | Permissions / sudoers isse in 12-21 image | Closed | |
Task Description
pndnotifyd will create .desktop files
Running those will fail; if you've just done a recent sudo, they'll run fine
Probably sudoers file needs fix |
|
15 | Core | Bug Report | Medium | Permissions / automounted SD Card | Closed | |
Task Description
Only root has write access to automounted SD Cards. The normal user can only read. |
|
44 | Core | Bug Report | Medium | Pandora-Start-Menu button too small | Closed | |
Task Description
Since about mid January, the Openpandora-Startmenu-Button doesn't resize when the "Show Title" is enabled.
Therefore, you only see parts of the "OpenPandora"-Title and no icon.
Disabling the title shows the icon. I have no idea how to resize it and why this happened (the theme hasn't been changed as far as I know) |
