|
260 | Core | Bug Report | Medium | Low Power Mode: Input (keyboard, nub) still taken. Appl... | Unconfirmed | |
Task Description
This is the related documentation:
http://pandorawiki.org/Power_modes#Low_Power
(Please update accordingly as part of the issue resolution)
FROM MY USER EXPERIENCE:
If you put the Pandora into Low Power Mode, then press some keys, and then wake the Pandora back into Normal Mode, your input (both keys and nubs, haven't tried with USB input yet) seem to have triggered something while the device was in Low Power Mode!
What does really happen in Low Power Mode concerning execution and input?
a) Input is received AND triggers as application execution continues
or
b) Kernel/driver queues the input signals into a buffer, and executes them on wake?
If supposition a) or b) is true, then this would be one more reason to properly implement: FS#259
OBSERVANCE EXAMPLE 1:
1) Start MiniMenu. Mentally note down your active tab.
2) Put Pandora to Low Power Mode.
3) Press shoulder button R once.
4) Wake Pandora to Normal Mode. You are now one tab to the right of where you left. Input must have been caught in Low Power Mode, but wether execution of it happened while Low Power Mode or later after wake in Normal power Mode is unclear.
OBSERVANCE EXAMPLE 2:
1) Start gedit (a text editor). Insert the digit "1".
2) Put Pandora to Low Power Mode.
3) Press: CTRL-N 2 CTRL-N 3 CTRL-N 4. (Without the spaces)
4) Wake Pandora to Normal Mode.
5) For a fraction of a second you see the tabs building up. Either the input was really received AND executed while Low Power Mode and what you see is just a delayed window manager refreshment, or the input was queued in Low Power Mode, and only executed on wake. |
|
259 | Core | Bug Report | High | Hold switch does NOT lock keyboard! Especially crucial ... | Closed | |
Task Description
Apps, which operate with the Pandora in closed lid mode, such as audio players, server processes, etc, in a button-press-probably environment (as i.e. your pocket) still CAN receive the shoulder button L + R key presses, and if they have a meaning in these programs, they could trigger undesired actions.
And also in the current implementation of the Low Power Mode (See: FS#260) key presses may still be received.
Therefore I strongly propose to implement the HOLD switch to en/dis-able a keyboard lock.
IN DETAIL: This shall be global, meaning that the input processing software (however this is implemented on the Pandora: kernel, driver, … ) keeps the lock state (on/off), and if the keyboard state is off,
a) discards all input, or
b) if it makes sense for some reason/applications (any ideas?) just writes them into a queue/buffer, which gets (partially) executed or made accessible to certain software after the keyboard gets unlocked again.
FYI: I have tested the hold switch with the Pandora Input-Tester, and it is recognized. So my report is definitely a software (and not an hardware) issue. |
|
257 | Core | Bug Report | Medium | TV Out script breaks XV/SDL Video playback | Unconfirmed | |
Task Description
This seems to be the case with Hot-fix 5 and 6 alpha 4.
I've been able to repeat this bug by re-flashing..
On a fresh re-flash.. installed community codec pack.. Videos will play fine on Panplayer, VLC and Gnome-Mplayer with default settings, which I believe is XV or SDL out in the case of VLC.
Run the TV-out script it will cause a blank black screen during playback.. Disabling TV-out, switching modes, rebooting.. battery out, nothing seems to allows it to work with XV/SDL out again.. I know If I switch to X11 it will make it "work" again, but I notice a bit of lag during playback using X11 compared to XV/SDL out. |
|
255 | Core | Bug Report | Medium | Waking Pandora with closed lid nevertheless turns scree ... | Closed | |
Task Description
Steps to reproduce the undesired behavior:
1) Close the lid. The screen goes off.
2) Slide the power switch to the right. The device goes into low power mode. The screen remains off.
3) Slide the power switch to the right. The device goes into normal power mode and turns on the screen although the lid is still closed!
Desired behavior:
Ad 3) If the system catches the event "wake from low power mode" it should first wake the system, then check the "lid open/close state", and set the screen on/off state accordingly. By this you could use the Pandora as a power-efficient sleep/wake-able closed-lid-device, practical for i.e. audio applications.
I am using: Pandora OS R1.HF6.A4 |
|
254 | Core | Bug Report | High | Several apps leave graphical artefact overlay (ghost) a ... | Closed | |
Task Description
After quitting some apps, their last graphical output remains on the screen, which covers a large area of the Pandora, and therefore makes it quite unusable, so that only a full restart resolves this issue.
As this happens in many apps (Mednafen-GB, Dark Light Battles, etc) this must be a problem within a shared library (driver, graphics lib, window manager framework, or similar). |
|
252 | Core | Feature Request | Low | Power management: If power cable is plugged ignore "Shu... | New | |
Task Description
If the power cable is plugged and the user chooses "Shutdown Pandora" from a menu, there should be a warning that this is without purpose, as the device will automatically restart.
The resulting user choices should be "Cancel shutdown" and "Shutdown nevertheless". |
|
251 | Core | Feature Request | Low | SD Mass Storage: Possibility to host multiple volumes | Unconfirmed | |
Task Description
a) Host multiple volumes at once.
b) Select one for hosting first, later host additional ones. (I guess this scenario is more complicated) |
|
248 | Core | Feature Request | Medium | Support for hibernation by caching to SD card | Closed | |
Task Description
It would be very desirable that the PandoraOS could hibernate, and that this action can easily be accessed/triggered with either a hotkey or as an action for the max-idle-time-event or lid-close-event.
That would be the battery friendly universal action to quickly pause/resume any arbitrary application/task.
The current standby mode is far to power consuming for breaks longer than ~ 1 hour. Improving standby mode to be more battery-friendly would of course be too highly appreciated and practical.
If hibernation is triggered, RAM content gets written to a special file or partition on a SD card. The boot-manager of course needs to recognize such a RAM-file on SD-cards. In case it finds more than 1, i.e.: multiple cards/partitions, the one with the newest timestamp gets priority.
256MB RAM with about 10-20 MB/s read/write time to SD, would result in 25-12 seconds for going into or out of hibernation, which would be acceptable for me. In practice it would mean, that if I quickly have to pause me OpenPandora operation (i.e. train stop), I just close my lid, and put the Pandora into my pocket (2-4 seconds), and I am then trusting that the rest reliable happens in my pocket (10-20 seconds). |
|
247 | Core | Bug Report | Low | pnd_make.sh can't handle PND with spaces in the path | Closed | |
Task Description
pnd_make.sh can't handle PND with spaces in the path. For example, if the label of the volume where the PND is saved, has spacebars.
The Problem is line 655:
655: PND=$(readlink -f $PND)
Bash handles a path with spacebars as two seperate arguments for the readlink command.
The problem is, that i don't know a solution for this problem. |
|
245 | Core | Feature Request | Low | BugTracker: Submitter shall be able to edit bug after p ... | Closed | |
Task Description
I accidentally posted a "feature request" as a "bug report" within the FlySpray BugTracker.
I wanted to correct my mistake.
It was not possible to edit it.
I assigned the bug to myself.
Then I could edit it.
But now I cannot un-assign it from me.
I merely wanted to suggest a feature but not take development responsibility (yet).
For original submitters, who later realize a mistake in their post, there should be a possibility to correct their mistake.
Please un-assign me from #237 #241 #243 and this one #245. Thanks. |
|
237 | Core | Bug Report | Critical | /dev/mmcblkN - N sometimes points to left, sometimes to ... | Closed | |
Task Description
SPECIFICATION:
According to http://pandorawiki.org/SD_compatibility_list
/dev/mmcblk0 is the left SD card slot (the one being closer to the headphone check)
/dev/mmcblk1 is the right SD card slot
I trusted that device path specification.
And it was correct MOST of the time.
But sadly only most of the time, NOT ALWAYS!!!
This bug is severely dangerous, as a (possibly critical) command could unexpectedly affect a device other than the one you intended it for!
BUG INCIDENT:
Sadly, I realized this bug at the worst possible moment!
I issued the command: shred -fvz /dev/mmcblk0
but it erased the card in the RIGHT slot.
I realized that because the card inserted on the left has 16GB, and the one on the right 128MB.
I checked both the card positions and my entered command, to exclude my own mistake. Sadly it was not a clumsy mistake: This severe bug really exists!
BUG REPRODUCIBILITY:
I already slightly witnessed this bug during the last days, but thought it was just a coincidence.
I.e. in GParted the larger card showed up at the wrong device path.
I did a refresh and/or ejected/re-inserted the card, and the expected device path was back again, and I did not think further about this incident.
Only today with this fatal shred incident, I eventually realized this behavior is a bug.
Luckily I had my data backed up. |
|
236 | Core | Bug Report | Low | Cannot unmount SD-Card | Unconfirmed | |
Task Description
SD-Card in Pandora can only be unmounted by guest (uid=1000) but not by jgeiss (uid=1001).
Steps To Reproduce:
Insert SD-Card (or boot with SD-Card inserted),
Login as jgeiss (uid=1001),
Try to unmount SD-Card via XFCE-Popup-Menu (right mouse click on SD-Card-Icon and select unmount). |
|
235 | Core | Bug Report | Low | File /tmp/currentuser cannot be deleted by other users | Closed | |
Task Description
The system creates a file /tmp/currentuser at the first login of a user. After logging out and in as another user the file still contains the previous user name. An cannot be deleted/overwritten by the new user.
Steps To Reproduce:
At least two users are available and have XFCE GUI enabled.
1. Login as user (eg. guest), a file /tmp/currentuser is created (containing guest)
2. Log out
3. Log in as another user (eg. jgeiss), the file still contains the old name
4. Change GUI to PMenu
5. Log out
6. Log in as first user (guest)
Now the first user (guest) has PMenu as GUI which was set by the second user (jgeiss).
Maybe the permission should be 0666 for this file? |
|
234 | Core | Feature Request | Medium | Changeable behaviour when closing the lid | Closed | |
Task Description
As it was requested on forum.gp2x.de and I think it's a good idea I've written some scripts to allow the user to change what happens when the lid is opened/closed.
There are 3 Settings:
-The old behaviour (turning off the screen)
-Go into low power mode
-Shutdown
Default behaviour is still the same: Turn the screen off. Maybe we could change this to low power mode? I don't know.
I made a lot of changes to op_lid.sh: http://pastebin.com/GT3qxWSx (diff: http://pastebin.com/Z8GwpDj8 )
I changed line 11 in op_power.sh to: if [ $powerstate -ne 0 ]; then
And wrote a gui for changing the setting using zenity: http://pastebin.com/9JvSTqfQ
(I still can't upload any files, don't know if it's the fault of my browser, that's why I use this paste service) |
|
233 | Core | Bug Report | Very Low | op_power.sh: errors | Closed | |
Task Description
op_power.sh gives some errors to me... it works anyway, but it's not nice to see them all the time.
/usr/pandora/scripts/op_power.sh: line 60: [: 5380: binary operator expected
or
/usr/pandora/scripts/op_power.sh: line 60: [: too many arguments
I guess line 60 of op_power.sh
if [ ! $wlstate ]; then
should rather be
if [ -z "$wlstate" ]; then
shouldn't it?
The same thing is in line
Then sometimes also
rm: cannot remove `/tmp/wlstate': No such file or directory
or
cat: /tmp/wlstate: No such file or directory
which could easily be fixed by adding a test -f /tmp/wlstate && or something like that before the respective command. I just added a lot of test, I'm not sure if every single one of them is really needed, but better too much than not enough, I would say. :-)
I can't attach a file (I click the button and nothing happens), so I just paste it there: http://nopaste.info/2256365eba.html
It's a bit longer because some indentations were wrong (and I corrected them) and I changed all indentations to tabs = 8 spaces instead of 2. |
|
232 | Core | Bug Report | Low | HF6 - charged completed with lid closed causing keyboar ... | Closed | |
Task Description
HF6 - It seems as when charging finishes with pandora on then charge light goes out (charge completed assuming) keyboard not functioning just gamepad. Can't use letters to cycle through in mini minimenu or use space to pull up ovr settings.
Will test further |
|
231 | Core | Bug Report | Low | Touchscreen not accurate on the edges - Calibration doe ... | Closed | |
Task Description
The touchscreen is accurate in the middle of the screen but precision is off by one or more mm near the edges of the screen. Recalibrating and rebooting does not help.
Seems like this is just a permission problem - tslib saves calibration data to /etc/pointercal which is noch writeable for the regular user.
Changing permission on that file to 666 solves this, but i guess starting the calibration tool with root permission (gksu?) would be a better solution. |
|
230 | Core | Bug Report | Low | Second SD slot not working in future kernel version 2.6 ... | Closed | |
Task Description
Sorry, not sure where to log this bug. I have confirmed with aTc on freenode, that SD slot #2 does not work on kernel version 2.6.37 from the openpandora git.
Happy to test anything and reports results. |
|
229 | Core | Bug Report | High | Enable wake on alarm interrupts | Unconfirmed | |
Task Description
Found I'd kept some notes about making the Pandora's wake on alarm function work...
drivers/rtc/rtc-twl4030.c
twl4030_rtc_remove (for when the driver is removed) and twl4030_rtc_
shutdown (for when the system is shutdown) functions need to change. Or at least the shut down does.
oh YUK who's been using goto....
changes in drivers/rtc/rtc-twl4030.c
twl4030_rtc_remove
commented out //mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
twl4030_rtc_shutdown
replaced
// mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
// BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
with
mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
twl4030_rtc_suspend
replaced
// mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
// BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
with
mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
twl4030_rtc_init
added (before return!)
twl4030_rtc_alarm_irq_set_state(true);
Should probably check reg 0x2B with mask 0x08 to see if alarm should be left enabled or not ?
but only in twl4030_rtc_shutdown and ?remove? NOT in twl4030_rtc_init
should remove ever happen ???
I'm guessing it's best to not enable the alarm irq's all the time??? |
|
228 | Core | Bug Report | Low | libpnd must be linked to libstdc++ | Closed | |
Task Description
Run "ldd -r /usr/lib/libpnd.so.1", and a number of undefined symbols are listed. These become a problem when attempting to load libpnd in Python. I imagine it could be a problem when attempting to load libpnd in other languages as well.
This can be worked around with "LD_PRELOAD=/usr/lib/libstdc++.so" before running a Python program that loads libpnd.
But it can be worked around more easily by linking libstdc++ during compile. Adding "-lstdc++" to line 41 of libpnd's Makefile does it. I'd add a patch, but the attach file button isn't working for me. Still, a simple fix, right? |
|
227 | Core | Bug Report | Low | Delete button won't delete, and function lock doesn't w... | Unconfirmed | |
Task Description
If you hit the function button, then hit it again to lock the function keys, it doesn't lock the function key.
The delete key, hold shift and hit the back space button, it won't delete, meaning it won't remove the character to the right of the cursor. I saw this on the forum, and confirmed it on my pandora also. |
|
226 | Core | Feature Request | High | Boot from /dev/sda devices requested | Closed | |
Task Description
Boot from usb hard disk not supported. This should be a rather simple fix of adding the sdx devices and adjust the boot scripts??
I was able to put this autoboot.txt on mmc 0:1
setenv bootargs debug root=/dev/sda1 rw rootdelay=2 console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
ext2load sda 0:1 0x80300000 /boot/uImage
bootm 0x80300000
This failed with amongst other things "Block device sda 0 not supported" and something about failing to load kernel
So I then changed the autoboot file to this
setenv bootargs debug root=/dev/sda1 rw rootdelay=2 console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
ext2load mmc 0:3 0x80300000 /boot/uImage
bootm 0x80300000
All this did was die after the kernel loaded.
I believe I could much better make use of this device if I could boot from some faster storage, please advise :) |
|
225 | Core | Bug Report | Medium | ads7846 reports odd pressure values | Unconfirmed | |
Task Description
using evdev xorg drivers and not the tslib drivers you can receive pressure axis data however there is
a problem with the values reported by the ads7846 module and the evdev driver has no calibration property for pressure
using
xinput test touchscreen
you can see the pressure axis ranging from 120-ish for hard press to about 150-170 for light press (low pressure values can
be quite erratic)
I could possibly hack the evdev module to possibly do something with this odd and narrow range of values, but I rather think looking
at the source that the ads7846 module needs some work.
is there a git tag that has a known working configuration? as I've had problems getting the kernel to compile the last few times I attempted... |
|
224 | Core | Bug Report | Low | Unresponsive start menu since HF5 | Closed | |
Task Description
Since hotfix 5, the start menu often pauses for a few seconds, not letting me select anything or move the mouse.
Other people have reported the issue as well:
http://boards.openpandora.org/index.php?/topic/2295-is-the-xfce-menu-trolling-anyone-else/page__gopid__42559#entry42559 |
|
223 | Core | Bug Report | High | op_power.sh kills gles context | Unconfirmed | |
Task Description
opengles and op_power.sh don't like each other very much.
whenever returning from low power to full power mode again, opengles rendering is just dead.
the reason for this issue are following 2 lines within op_power.sh
18 echo 0 > /sys/devices/platform/omapfb/graphics/fb0/blank
...
66 echo 1 > /sys/devices/platform/omapfb/graphics/fb0/blank
if these lines are removed/commented, the gles rendering just resumes fine. |
|
221 | Core | Bug Report | Medium | 32MB worth of qt4 examples in /usr/bin/qt4 ? | Closed | |
Task Description
Hi, after upgrading to HF5, I accidentally discovered that there are 32MB of qt4 examples & demos in directory /usr/bin/qt4, those examples do work. For instance the /usr/bin/qt4/examples/webkit/fancybrowser/fancybrowser is a working WWW browser.
It is, without any dispute a very useful qt4 development help, but are you sure that you want to include all that in NAND ? |
|
220 | Core | Feature Request | Low | Please include /usr/bin/xkbset | Closed | |
Task Description
One of the first things after installing HF5 was downloading xkbset, because it is necessary for proper L-R buttons mapping as mouse buttons. Could you please include that in the system?
I am using urjaman's executable from here:
http://www.gp32x.com/board/index.php?/topic/55124-remapping-the-mouse-buttons-etc/page__st__15__p__896576&#entry896576
Even better would be a GUI that allows mapping of L-R buttons for mouse, just like GUI for nubs :) But including xkbset will be already good. |
|
219 | Core | Bug Report | Medium | wrong owner of /home/user/Desktop | Closed | |
Task Description
I just reflashed with HF5, and it turns out that I cannot make shortcuts on the desktop. It is very simple to fix:
sudo chown janek.janek Desktop/
I remember that this bug was also present in HF4, I fixed it so quickly that I didn't even remember to report it. |
|
215 | Core | Bug Report | Medium | Kingston 32GB Class6G2 SDHC card not working in pandora | Closed | |
Task Description
I have noticed errors like this, but not every time
[ 1455.612792] mmc2: card claims to support voltages below the defined range. These will be ignored.
[ 1455.621795] mmc2: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.
[ 1455.665985] mmc2: new SDIO card at address 0001
This is me plugging in my 32GB SD6G2 Kingston SDHC card.
at [ 1114.484252] is when the file copy started
Errors continue from there until it bombs and remounts the filesystem readonly.
I have tried this with ext3 vfat in various configurations and all fail the same I/O errors
Let me know if I can do anything to help
-------------------------------------
[ 989.496459] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 989.504638] mmc1: new high speed SDHC card at address 0003
[ 989.510620] mmcblk1: mmc1:0003 SD32G 31514112KiB
[ 989.515625] mmcblk1: p1 p2 p3 p4 < p5 p6 >
[ 989.940490] FAT: invalid media value (0x00)
[ 989.944702] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 990.083190] FAT: invalid media value (0x00)
[ 990.087402] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 991.907562] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 991.922943] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 992.002563] mmci-omap mmci-omap.0: MMC IRQ 0x208002 : TC ERRI DCRC
[ 992.003143] mmcblk0: retrying using single block read
[ 992.028411] kjournald starting. Commit interval 5 seconds
[ 992.048553] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 992.092346] kjournald starting. Commit interval 5 seconds
[ 992.237091] kjournald starting. Commit interval 5 seconds
[ 992.259185] EXT3-fs: Unrecognized mount option "umask=0" or missing value
[ 992.361999] FAT: bogus number of reserved sectors
[ 992.366760] VFS: Can't find a valid FAT filesystem on dev mmcblk1p4.
[ 992.400909] kjournald starting. Commit interval 5 seconds
[ 992.612945] EXT3 FS on mmcblk1p2, internal journal
[ 992.617797] EXT3-fs: mounted filesystem with ordered data mode.
[ 992.787475] EXT3 FS on mmcblk1p3, internal journal
[ 992.792449] EXT3-fs: mounted filesystem with ordered data mode.
[ 993.038940] EXT3 FS on mmcblk1p1, internal journal
[ 993.043884] EXT3-fs: mounted filesystem with ordered data mode.
[ 993.205749] EXT3 FS on mmcblk1p5, internal journal
[ 993.210632] EXT3-fs: mounted filesystem with ordered data mode.
[ 993.510253] FAT: bogus number of reserved sectors
[ 993.515045] VFS: Can't find a valid FAT filesystem on dev mmcblk1p4.
[ 1114.484252] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1114.484802] mmcblk0: retrying using single block read
[ 1115.763946] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1115.765594] mmcblk0: retrying using single block read
[ 1115.984649] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1115.984985] mmcblk0: retrying using single block read
[ 1116.039489] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.039916] mmcblk0: retrying using single block read
[ 1116.094329] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.094757] mmcblk0: retrying using single block read
[ 1116.150146] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.152343] mmcblk0: retrying using single block read
[ 1116.212127] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.212615] mmcblk0: retrying using single block read
[ 1116.267791] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.268280] mmcblk0: retrying using single block read
[ 1116.335723] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.337738] mmcblk0: retrying using single block read
[ 1116.410766] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.413360] mmcblk0: retrying using single block read
[ 1116.488250] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.490234] mmcblk0: retrying using single block read
[ 1116.581390] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.581939] mmcblk0: retrying using single block read
[ 1116.645721] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.646331] mmcblk0: retrying using single block read
[ 1116.933288] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1116.933715] mmcblk0: retrying using single block read
[ 1117.000518] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.002899] mmcblk0: retrying using single block read
[ 1117.068328] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.070526] mmcblk0: retrying using single block read
[ 1117.128326] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.128753] mmcblk0: retrying using single block read
[ 1117.194183] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.194488] mmcblk0: retrying using single block read
[ 1117.261566] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.262084] mmcblk0: retrying using single block read
[ 1117.328674] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.329956] mmcblk0: retrying using single block read
[ 1117.388061] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.390380] mmcblk0: retrying using single block read
[ 1117.451629] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.452087] mmcblk0: retrying using single block read
[ 1117.510467] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.512725] mmcblk0: retrying using single block read
[ 1117.714874] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.715301] mmcblk0: retrying using single block read
[ 1117.776550] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.778930] mmcblk0: retrying using single block read
[ 1117.841247] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1117.841674] mmcblk0: retrying using single block read
[ 1122.718658] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1122.719055] mmcblk0: retrying using single block read
[ 1123.265136] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1123.265441] mmcblk0: retrying using single block read
[ 1123.442230] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1123.442413] mmcblk0: retrying using single block read
[ 1126.759338] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1126.759399] mmcblk1: error -110 transferring data, sector 32669824, nr 8, card status 0xc00
[ 1126.807830] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1126.807891] end_request: I/O error, dev mmcblk1, sector 32669824
[ 1126.813934] Buffer I/O error on device mmcblk1p1, logical block 4083726
[ 1126.820556] lost page write due to I/O error on mmcblk1p1
[ 1127.630950] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1127.631011] mmcblk1: error -110 transferring data, sector 32686232, nr 8, card status 0xc00
[ 1127.715179] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1127.715240] end_request: I/O error, dev mmcblk1, sector 32686232
[ 1127.721282] Buffer I/O error on device mmcblk1p1, logical block 4085777
[ 1127.727935] lost page write due to I/O error on mmcblk1p1
[ 1133.399963] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.400024] Spurious DMA IRQ
[ 1133.403411] mmcblk0: retrying using single block read
[ 1133.504821] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.504943] mmcblk0: retrying using single block read
[ 1133.599304] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.599548] mmcblk0: retrying using single block read
[ 1133.767486] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1133.767578] mmcblk0: retrying using single block read
[ 1134.222564] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC
[ 1137.074981] mmcblk0: retrying using single block read
[ 1137.465576] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1137.465667] mmcblk1: error -110 transferring data, sector 17316672, nr 72, card status 0xc00
[ 1137.509582] mmci-omap mmci-omap.1: MMC IRQ 0x108000 : ERRI DTO
[ 1137.509643] end_request: I/O error, dev mmcblk1, sector 17316672
[ 1137.515686] end_request: I/O error, dev mmcblk1, sector 17316680
[ 1137.521728] end_request: I/O error, dev mmcblk1, sector 17316688
[ 1137.527770] end_request: I/O error, dev mmcblk1, sector 17316696
[ 1137.533813] end_request: I/O error, dev mmcblk1, sector 17316704
[ 1137.539855] end_request: I/O error, dev mmcblk1, sector 17316712
[ 1137.545867] end_request: I/O error, dev mmcblk1, sector 17316720
[ 1137.551910] end_request: I/O error, dev mmcblk1, sector 17316728
[ 1137.557952] end_request: I/O error, dev mmcblk1, sector 17316736
[ 1137.766906] Aborting journal on device mmcblk1p1.
[ 1137.997436] journal commit I/O error
[ 1138.001037] EXT3-fs error (device mmcblk1p1) in ext3_create: IO failure
[ 1138.225067] ext3_abort called.
[ 1138.228149] EXT3-fs error (device mmcblk1p1): ext3_journal_start_sb: Detected aborted journal
[ 1138.236785] Remounting filesystem read-only |
|
214 | Core | Bug Report | High | op_wifi pnd not exiting cleanly, with fix (one characte ... | Closed | |
Task Description
The op_wifi pnd does not exit out cleanly once the encased script executes,
the pndrun_op_wifi.out reports
umount: /mnt/utmp/op_wifi: device is busy.
umount: /mnt/utmp/op_wifi: device is busy.
umount UNION failed, didn't clean up. Process still using this FS :
3197 ? S 0:00 /bin/sh /etc/init.d/wl1251-init start
This op_wifi.sh just calls
/usr/pandora/scripts/op_wifi.sh
for some reason, the init.d/w.... start causes it to hang, I executed all this locally, and it doesn't appear to keep running
Appending " &" to the line which calls this init script, solves the problem. |
|
212 | Core | Feature Request | Low | Add curl to core installed programs | Closed | |
Task Description
I wish for curl to be installed by default on the upcoming pandora FWs,
As reported by the angstrom repo, where I install using the command:
$sudo su
...
#opkg update
#opkg install curl
curl 7.21.2-r4.0.9 is 78.57 Kilobytes with the dependencies
Depends:libcurl4, libgnutls26, libgcrypt11, libgpg-error0, libc6, libz1
I do not know which is installed by default, but I'm sure libc6 is, so I'm going to state the info on the rest of the packages for its memory space usage on the NAND
libcurl4(142.99 Kilobytes):
Command line tool and library for client-side URL transfers.
Depends:libc6, libgnutls26, libz1, libgcrypt11, libgpg-error0, as you can see, it has the same dependencies as above, so it seems both curl and libcurl are probably exclusive from the others, but I will go forward and state the rest of the dependencies
libgnutls26 2.8.6-r10.0.5 (291.44 Kilobytes)
Depends:libz1, libgcrypt11, libgpg-error0, libc6, (again, it looks like the above depends on this)
libgcrypt11 1.4.1-r0.9 (220.35 Kilobytes)
Depends: libgpg-error0, libc6, (Oh look, we're not looking at libz1 anymore)
libgpg-error0 1.4-r7.1.9 (5.78 Kilobytes)
Depends:libc6
now to the lone libz1
libz1 1.2.3-r7.0.9 (41.95 Kilobytes)
Depends:libc6
So, in the case we already have the gpg stuff, then the installation is only 221.56KB, however, with the zlib and the gpg included, the total comes to 781.08KB
So, now that the cost is out of the way, What are the goods and bads?
Good:
Its a very versatile CLI program to get and send information over http through the network, and is tolerant of network issues
It doesn't take too much space relative to things that have been pulled out, like abiword.
The libcurl is a very good library, and could be of great benefit to some future projects.
Bad:
Well, we already have wget, which is not as configurable, and wget hates Craig's appstore
Here's the link to curl on the repo
http://www.angstrom-distribution.org/repo/?pkgname=curl |
|
211 | Core | Bug Report | Low | x11vnc server (in xfce menu - > network) does not work! | Closed | |
Task Description
x11vnc launcher in xfce menu -> network does not work.
can this be fixed please. |
|
210 | Core | Feature Request | Medium | Wader - cross platform graphical assistant for 3g conne... | Unconfirmed | |
Task Description
http://www.wader-project.org
http://trac.wader-project.org
http://trac.wader-project.org/wiki/Developers
this would be really usefull to monitor reception/network of mobile broadband dongle and it also counts ur mobile data usage (for those that have limits). |
|
209 | Core | Feature Request | Medium | Shutdown after a full charge | Unconfirmed | |
Task Description
That still need to be configurable, but chris_c does a good job I'ld like to see integraded in the main image :
http://www.gp32x.com/board/index.php?/topic/58794-a-script-to-shutdown-after-charging/
and :
http://chrisc.bedroomcoders.co.uk/?p=77 |
|
208 | Core | Bug Report | Critical | HOTFIX 4 and 5 Slow WIFI | Closed | |
Task Description
I'm getting 5kb/s with bursts up to 10kb/s if I am lucky.
I have attempted every channel on my router.
Tried every encryption even no encryption.
Tested with the router's wifi speed: 300Mbps 154Mbps and 45Mbps
I'm running Hotfix 5 RC2.
Wifi works fine with my android smartphone, and other wireless devices such as a laptop. |
|
207 | Core | Bug Report | Medium | Touchscreen calibration / use of nubs conflict | Closed | |
Task Description
When using certain apps like Basilisk 2 / Dosbox / Enigma the analogue stick and touchscreen are both available to use as a mouse cursor.
All is well with the touch until you decide to touch the analogue stick when then affects touchscreen alignment by about 2 - 3 CM.
This has been going on since first release. |
|
205 | Core | Bug Report | Medium | libpnd functions and dynamic libs missing | Closed | |
Task Description
tried to compile a simple test application that uses functions from libpnd, namely
pnd_evdev_open(pnd_evdev_e)
pnd_evdev_dpad_state(pnd_evdev_e)
pnd_evdev_closeall()
but all 3 seem to be missing.
yes, i'm linking to libpnd ... but no chance to get it running.
i'm using ivanovic's latest toolchain, which in turn installs "pandora-libpnd-dev_1.0-r40.5_armv7a.ipk" ...
also, there's only the static library available inside, no dynamic libraries. |
|
204 | Core | Bug Report | Medium | fonts issues | Unconfirmed | |
Task Description
Ok, I just want to say that there is something missing about the font on the base image. I cant get what (at least for now)
Here is an issue : http://www.gp32x.com/board/index.php?/topic/54282-getting-vnc-viewer-to-work/
With my current Ogre build I get :
Warning: Unable to load any usable ISO8859 font
Error: Aborting: no font found
I've googled but so far no solution :( |
|
203 | Core | Bug Report | Low | Video-out setting window does not exit on OK | Closed | |
Task Description
The "video-out" window opens again if you choose OK button. |
|
202 | Core | Bug Report | Low | Set Date and Time won't let you cancel or close | Closed | |
Task Description
The Date and Time application in MiniMenu by won't let you use the cross or the cancel button to close the application without changing anything.
If you use one of those buttons then a new window opens that says: "Error: Please select a timezone" and equally so for the date and time. |
|
201 | Core | Bug Report | High | PND apps still use memory after they've quit | Closed | |
Task Description
After running and quitting a PND app, not all of the used memory is being freed.
This eats more and more memory over time. Just run 5 or 6 apps and you only have half of the memory left.
Sounds like either aufs or unionfs don't free the memory after unmounting.
This has been reported with HF4 and still is the case with HF5 Beta 2
-- downgraded to 'Researching' and 'Normal' priority until confirmed and details found |
|
200 | Core | Bug Report | Low | After opening the lid, the backlight is not reset to th ... | Closed | |
Task Description
Using the hotkeys to set the backlite, after closing and then opening the lid, the backlight is not reset to the same level it was before closing it.
It seems to set it to a fixed value. |
|
197 | Core | Bug Report | High | [PATCH] Fix opp if booting with wrong settings in hw | Closed | |
Task Description
Hi,
This should help with cases like this
http://www.gp32x.com/board/index.php?/topic/57303-overclocking-broke-my-pandora/
Patch attached. |
|
196 | Core | Feature Request | Medium | [PATCH] Add tablet support into kernel | Closed | |
Task Description
Hi,
This should be a quite simple thing, but my first time touching
the OE repo and i cant test it, so be careful. |
|
195 | Core | Feature Request | High | Start re-recharge of battery sooner | Closed | |
Task Description
Increase battery LVL_4 and LVL_3 threshold.
After reaching 100%, in some cases the charge circuit enters "battery full" state, stops charging, and begins to discharge. This is not entirely unexpected behavior according to the spec sheet, although I don't fully understand exactly the situations in which it completes charging. Once the battery is full, the battery will begin discharging. The charge circuit automatically restarts the recharge once the voltage has gone below a certain level (crosses below the LVL_3 voltage threshold)
The default LVL_3 voltage threshold is 3.902 volts which is at about 80-85% battery level as recorded by bq27500 chip. In my opinion, this is way too low.
Setting the BCIMFTH2 register to 0xCB increases the voltage threshold to about 4.003 volts which is about 93%.
Setting it to 0xDC may also be worthwhile, which is just over 95%.
By default, if a user leaves their Pandora plugged in overnight, they may wake up to find their Pandora has stopped charging and the capacity has dropped to almost 80%, which can be quite startling to some users who will then report it as a bug.
This change will ensure that it never drops below 93-95%, a much more acceptable level.
Specific code changes suggested, in the /drivers/power/twl4030_bci_battery.c file, somewhere in the twl4030_bci_battery_probe function (or a function called by it), add the lines:
/********************************/
#define KEY_FTH2 0x7F
#define REG_BCIMFTH2 0x017
ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, KEY_FTH2, REG_BCIMFKEY);
if (ret)
return ret;
ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, 0xDC, REG_BCIMFTH2);
if (ret)
return ret;
/********************************/
(Move defines to the top, as appropriate) |
|
194 | Core | Bug Report | Low | python ctypes broken (and fix) | Closed | |
Task Description
run python and type import ctypes
cant find _ctypes it says....
for further details and a fix see
http://www.gp32x.com/board/index.php?/topic/57102-python-ctypes-stopped-working/ |
|
193 | Core | Bug Report | Low | Cannot reach button well in ubuntu x64 | Closed | |
Task Description
Window can also not be resized |
|
192 | Core | Bug Report | Medium | [U-Boot] ext2fs_devread() read error - block (boot from ... | Closed | |
Task Description
[U-Boot] ext2fs_devread() read error - block
Description:
Formatted two different Transcend 8GB SD cards as EXT2 using both GParted and also with Mkfs.ext2, extracted pandora-rootfs.tar.bz2 to the root of the SD and added 'autoboot.txt' as described here: http://openpandora.org/firmware/README.txt
This issue appears to be same as mentioned here, looks like a patch maybe required in drivers/mmc/omap3_mmc.c):
http://lists.denx.de/pipermail/u-boot/2010-June/072198.html
Output on boot :
mmc1 is available
reading autoboot.txt
** Unable to read "autoboot.txt" from mc1 0:1 **
Loading file "autoboot.txt" from mmc1 device 0:! (xxa1)
184 bytes read
** Executing plain script at 82000000
Loading file "/boot/uImage-2.6.27.46-omap1" from mmc device 0:1 (xxa1)
** ext2fs_devread() read error - block
** Unable to read "/boot/uImage-2.6.27.46-omap1" from mmc 0:1 **
## Booting kernel from Legacy Image at 8030000 ...
Image Name: Angstrom/2.6.27-pandora+r21+git4
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2325740 Bytes = 2.2 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!
syntax error |
|
190 | Core | Bug Report | Medium | Removing desktop-shortkeys does not work | Unconfirmed | |
Task Description
Try clearing shortcuts in Start->Settings->Window Manager->Keyboard. That doesn't work (for me).
This is a problem because these shortcuts are blocking key-combination in apps, like for example the keymapper in dosbox (CTRL+F1) or refreshing content (CTRL+F5). I tried manual editing or even deleting the configuration file, but changes are not recognized and the file recreated on reboot. |
|
189 | Core | Bug Report | Medium | pnd-run.sh does not work correctly for very long <pathn ... | Closed | |
Task Description
When unmounting, the pnd-run-script greps the output of "losetup -a" at some point. But if you have a very long pathname and filename for the pnd (like "/media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_EN.pnd" then the endpart is cut off in the output, grep can't find the right part and the script get's confused.
Example:
mounting works:
/usr/pandora/scripts/pnd_run.sh -p /media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_EN.pnd -b scummvm -m
unounting does not work:
/usr/pandora/scripts/pnd_run.sh -p /media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_EN.pnd -b scummvm -u
(see /tmp/pndrun*-logs for output)
The problem is that the outut of losetup looks like this in such a case:
"/dev/loop7: [b309]:157081 (/media/trans8/gamedata/scummvm/Secret_of_Monkey_Islands_Amiga_*)"
And because the pnd-name is not fully shown, grepping the name does not work. After i renamed th pnd to a much shorter name (somi_amiga_en.pnd) it worked nicely. Still this should be fixed. |
