OpenPandora Main OS

This project it to track issues relating to the current shipping OS only as found here http://goo.gl/S5JCy. Please state what Hotfix you are running with any issue report. Please ONLY use this to record issues for the main OS and its default included applications - any other application issue reports should go into the Additional Applications project. Issue reports with 'in development OS images' or feature requests for the next MAJOR version (not Hotfix release) should be placed into the OpenPandora Development OS project and reported on the mailing list http://openpandora.org/cgi-bin/mailman/listinfo/firmware-dev. Please read this page to find out how to properly report bugs: http://pandorawiki.org/Reporting_bugs

IDCategory  ascTask TypeSeveritySummaryStatusProgress
 219 CoreBug ReportMedium wrong owner of /home/user/Desktop Closed
100%
Task Description I just reflashed with HF5, and it turns out that I cannot make shortcuts on the desktop. It is very simple to fix: sudo chown janek.janek Desktop/ I remember that this bug was also present in HF4, I fixed it so quickly that I didn't even remember to report it.
 221 CoreBug ReportMedium 32MB worth of qt4 examples in /usr/bin/qt4 ? Closed
100%
Task Description Hi, after upgrading to HF5, I accidentally discovered that there are 32MB of qt4 examples & demos in directory /usr/bin/qt4, those examples do work. For instance the /usr/bin/qt4/examples/webkit/fancybrowser/fancybrowser is a working WWW browser. It is, without any dispute a very useful qt4 development help, but are you sure that you want to include all that in NAND ?
223CoreBug ReportHighop_power.sh kills gles contextUnconfirmed
0%
Task Description opengles and op_power.sh don't like each other very much. whenever returning from low power to full power mode again, opengles rendering is just dead. the reason for this issue are following 2 lines within op_power.sh 18 echo 0 > /sys/devices/platform/omapfb/graphics/fb0/blank ... 66 echo 1 > /sys/devices/platform/omapfb/graphics/fb0/blank if these lines are removed/commented, the gles rendering just resumes fine.
 224 CoreBug ReportLow Unresponsive start menu since HF5 Closed
100%
Task Description Since hotfix 5, the start menu often pauses for a few seconds, not letting me select anything or move the mouse. Other people have reported the issue as well: http://boards.openpandora.org/index.php?/topic/2295-is-the-xfce-menu-trolling-anyone-else/page__gopid__42559#entry42559
225CoreBug ReportMediumads7846 reports odd pressure valuesUnconfirmed
0%
Task Description using evdev xorg drivers and not the tslib drivers you can receive pressure axis data however there is a problem with the values reported by the ads7846 module and the evdev driver has no calibration property for pressure using xinput test touchscreen you can see the pressure axis ranging from 120-ish for hard press to about 150-170 for light press (low pressure values can be quite erratic) I could possibly hack the evdev module to possibly do something with this odd and narrow range of values, but I rather think looking at the source that the ads7846 module needs some work. is there a git tag that has a known working configuration? as I've had problems getting the kernel to compile the last few times I attempted...
227CoreBug ReportLowDelete button won't delete, and function lock doesn't w...Unconfirmed
50%
Task Description If you hit the function button, then hit it again to lock the function keys, it doesn't lock the function key. The delete key, hold shift and hit the back space button, it won't delete, meaning it won't remove the character to the right of the cursor. I saw this on the forum, and confirmed it on my pandora also.
 228 CoreBug ReportLow libpnd must be linked to libstdc++ Closed
100%
Task Description Run "ldd -r /usr/lib/libpnd.so.1", and a number of undefined symbols are listed. These become a problem when attempting to load libpnd in Python. I imagine it could be a problem when attempting to load libpnd in other languages as well. This can be worked around with "LD_PRELOAD=/usr/lib/libstdc++.so" before running a Python program that loads libpnd. But it can be worked around more easily by linking libstdc++ during compile. Adding "-lstdc++" to line 41 of libpnd's Makefile does it. I'd add a patch, but the attach file button isn't working for me. Still, a simple fix, right?
229CoreBug ReportHighEnable wake on alarm interrupts Unconfirmed
0%
Task Description Found I'd kept some notes about making the Pandora's wake on alarm function work... drivers/rtc/rtc-twl4030.c twl4030_rtc_remove (for when the driver is removed) and twl4030_rtc_ shutdown (for when the system is shutdown) functions need to change. Or at least the shut down does. oh YUK who's been using goto.... changes in drivers/rtc/rtc-twl4030.c twl4030_rtc_remove commented out //mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); twl4030_rtc_shutdown replaced // mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | // BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); with mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); twl4030_rtc_suspend replaced // mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | // BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); with mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); twl4030_rtc_init added (before return!) twl4030_rtc_alarm_irq_set_state(true); Should probably check reg 0x2B with mask 0x08 to see if alarm should be left enabled or not ? but only in twl4030_rtc_shutdown and ?remove? NOT in twl4030_rtc_init should remove ever happen ??? I'm guessing it's best to not enable the alarm irq's all the time???
 230 CoreBug ReportLow Second SD slot not working in future kernel version 2.6 ...Closed
100%
Task Description Sorry, not sure where to log this bug. I have confirmed with aTc on freenode, that SD slot #2 does not work on kernel version 2.6.37 from the openpandora git. Happy to test anything and reports results.
 231 CoreBug ReportLow Touchscreen not accurate on the edges - Calibration doe ...Closed
100%
Task Description The touchscreen is accurate in the middle of the screen but precision is off by one or more mm near the edges of the screen. Recalibrating and rebooting does not help. Seems like this is just a permission problem - tslib saves calibration data to /etc/pointercal which is noch writeable for the regular user. Changing permission on that file to 666 solves this, but i guess starting the calibration tool with root permission (gksu?) would be a better solution.
 232 CoreBug ReportLow HF6 - charged completed with lid closed causing keyboar ...Closed
100%
Task Description HF6 - It seems as when charging finishes with pandora on then charge light goes out (charge completed assuming) keyboard not functioning just gamepad. Can't use letters to cycle through in mini minimenu or use space to pull up ovr settings. Will test further
 233 CoreBug ReportVery Low op_power.sh: errors Closed
100%
Task Description op_power.sh gives some errors to me... it works anyway, but it's not nice to see them all the time. /usr/pandora/scripts/op_power.sh: line 60: [: 5380: binary operator expected or /usr/pandora/scripts/op_power.sh: line 60: [: too many arguments I guess line 60 of op_power.sh if [ ! $wlstate ]; then should rather be if [ -z "$wlstate" ]; then shouldn't it? The same thing is in line Then sometimes also rm: cannot remove `/tmp/wlstate': No such file or directory or cat: /tmp/wlstate: No such file or directory which could easily be fixed by adding a test -f /tmp/wlstate && or something like that before the respective command. I just added a lot of test, I'm not sure if every single one of them is really needed, but better too much than not enough, I would say. :-) I can't attach a file (I click the button and nothing happens), so I just paste it there: http://nopaste.info/2256365eba.html It's a bit longer because some indentations were wrong (and I corrected them) and I changed all indentations to tabs = 8 spaces instead of 2.
 235 CoreBug ReportLow File /tmp/currentuser cannot be deleted by other users Closed
100%
Task Description The system creates a file /tmp/currentuser at the first login of a user. After logging out and in as another user the file still contains the previous user name. An cannot be deleted/overwritten by the new user. Steps To Reproduce: At least two users are available and have XFCE GUI enabled. 1. Login as user (eg. guest), a file /tmp/currentuser is created (containing guest) 2. Log out 3. Log in as another user (eg. jgeiss), the file still contains the old name 4. Change GUI to PMenu 5. Log out 6. Log in as first user (guest) Now the first user (guest) has PMenu as GUI which was set by the second user (jgeiss). Maybe the permission should be 0666 for this file?
236CoreBug ReportLowCannot unmount SD-CardUnconfirmed
0%
Task Description SD-Card in Pandora can only be unmounted by guest (uid=1000) but not by jgeiss (uid=1001). Steps To Reproduce: Insert SD-Card (or boot with SD-Card inserted), Login as jgeiss (uid=1001), Try to unmount SD-Card via XFCE-Popup-Menu (right mouse click on SD-Card-Icon and select unmount).
 237 CoreBug ReportCritical /dev/mmcblkN - N sometimes points to left, sometimes to ...Closed
100%
Task Description SPECIFICATION: According to http://pandorawiki.org/SD_compatibility_list /dev/mmcblk0 is the left SD card slot (the one being closer to the headphone check) /dev/mmcblk1 is the right SD card slot I trusted that device path specification. And it was correct MOST of the time. But sadly only most of the time, NOT ALWAYS!!! This bug is severely dangerous, as a (possibly critical) command could unexpectedly affect a device other than the one you intended it for! BUG INCIDENT: Sadly, I realized this bug at the worst possible moment! I issued the command: shred -fvz /dev/mmcblk0 but it erased the card in the RIGHT slot. I realized that because the card inserted on the left has 16GB, and the one on the right 128MB. I checked both the card positions and my entered command, to exclude my own mistake. Sadly it was not a clumsy mistake: This severe bug really exists! BUG REPRODUCIBILITY: I already slightly witnessed this bug during the last days, but thought it was just a coincidence. I.e. in GParted the larger card showed up at the wrong device path. I did a refresh and/or ejected/re-inserted the card, and the expected device path was back again, and I did not think further about this incident. Only today with this fatal shred incident, I eventually realized this behavior is a bug. Luckily I had my data backed up.
 247 CoreBug ReportLow pnd_make.sh can't handle PND with spaces in the path Closed
100%
Task Description pnd_make.sh can't handle PND with spaces in the path. For example, if the label of the volume where the PND is saved, has spacebars. The Problem is line 655: 655: PND=$(readlink -f $PND) Bash handles a path with spacebars as two seperate arguments for the readlink command. The problem is, that i don't know a solution for this problem.
 254 CoreBug ReportHigh Several apps leave graphical artefact overlay (ghost) a ...Closed
100%
Task Description After quitting some apps, their last graphical output remains on the screen, which covers a large area of the Pandora, and therefore makes it quite unusable, so that only a full restart resolves this issue. As this happens in many apps (Mednafen-GB, Dark Light Battles, etc) this must be a problem within a shared library (driver, graphics lib, window manager framework, or similar).
 255 CoreBug ReportMedium Waking Pandora with closed lid nevertheless turns scree ...Closed
100%
Task Description Steps to reproduce the undesired behavior: 1) Close the lid. The screen goes off. 2) Slide the power switch to the right. The device goes into low power mode. The screen remains off. 3) Slide the power switch to the right. The device goes into normal power mode and turns on the screen although the lid is still closed! Desired behavior: Ad 3) If the system catches the event "wake from low power mode" it should first wake the system, then check the "lid open/close state", and set the screen on/off state accordingly. By this you could use the Pandora as a power-efficient sleep/wake-able closed-lid-device, practical for i.e. audio applications. I am using: Pandora OS R1.HF6.A4
257CoreBug ReportMediumTV Out script breaks XV/SDL Video playbackUnconfirmed
0%
Task Description This seems to be the case with Hot-fix 5 and 6 alpha 4. I've been able to repeat this bug by re-flashing.. On a fresh re-flash.. installed community codec pack.. Videos will play fine on Panplayer, VLC and Gnome-Mplayer with default settings, which I believe is XV or SDL out in the case of VLC. Run the TV-out script it will cause a blank black screen during playback.. Disabling TV-out, switching modes, rebooting.. battery out, nothing seems to allows it to work with XV/SDL out again.. I know If I switch to X11 it will make it "work" again, but I notice a bit of lag during playback using X11 compared to XV/SDL out.
 259 CoreBug ReportHigh Hold switch does NOT lock keyboard! Especially crucial  ...Closed
100%
Task Description Apps, which operate with the Pandora in closed lid mode, such as audio players, server processes, etc, in a button-press-probably environment (as i.e. your pocket) still CAN receive the shoulder button L + R key presses, and if they have a meaning in these programs, they could trigger undesired actions. And also in the current implementation of the Low Power Mode (See: FS#260) key presses may still be received. Therefore I strongly propose to implement the HOLD switch to en/dis-able a keyboard lock. IN DETAIL: This shall be global, meaning that the input processing software (however this is implemented on the Pandora: kernel, driver, … ) keeps the lock state (on/off), and if the keyboard state is off, a) discards all input, or b) if it makes sense for some reason/applications (any ideas?) just writes them into a queue/buffer, which gets (partially) executed or made accessible to certain software after the keyboard gets unlocked again. FYI: I have tested the hold switch with the Pandora Input-Tester, and it is recognized. So my report is definitely a software (and not an hardware) issue.
260CoreBug ReportMediumLow Power Mode: Input (keyboard, nub) still taken. Appl...Unconfirmed
0%
Task Description This is the related documentation: http://pandorawiki.org/Power_modes#Low_Power (Please update accordingly as part of the issue resolution) FROM MY USER EXPERIENCE: If you put the Pandora into Low Power Mode, then press some keys, and then wake the Pandora back into Normal Mode, your input (both keys and nubs, haven't tried with USB input yet) seem to have triggered something while the device was in Low Power Mode! What does really happen in Low Power Mode concerning execution and input? a) Input is received AND triggers as application execution continues or b) Kernel/driver queues the input signals into a buffer, and executes them on wake? If supposition a) or b) is true, then this would be one more reason to properly implement:  FS#259  OBSERVANCE EXAMPLE 1: 1) Start MiniMenu. Mentally note down your active tab. 2) Put Pandora to Low Power Mode. 3) Press shoulder button R once. 4) Wake Pandora to Normal Mode. You are now one tab to the right of where you left. Input must have been caught in Low Power Mode, but wether execution of it happened while Low Power Mode or later after wake in Normal power Mode is unclear. OBSERVANCE EXAMPLE 2: 1) Start gedit (a text editor). Insert the digit "1". 2) Put Pandora to Low Power Mode. 3) Press: CTRL-N 2 CTRL-N 3 CTRL-N 4. (Without the spaces) 4) Wake Pandora to Normal Mode. 5) For a fraction of a second you see the tabs building up. Either the input was really received AND executed while Low Power Mode and what you see is just a delayed window manager refreshment, or the input was queued in Low Power Mode, and only executed on wake.
 264 CoreBug ReportLow Issues with HOTFIX 6 R1 Beta Closed
100%
Task Description I started with hotfix 5 and when I used the Left Nub for mouse movement it performed well. I installed HOTFIX 6 R1 Beta and the Nub works fine except pushing up. It moves the cursor very slow and all other directions just fine. The other nub works just fine as well. This only began after I installed HF6R1B. I also had to install the Hotfix twice due to sustained system freeze upon start up on the first attempt. I enabled gui choice but minimenu does not function it just cycles back to GUI choice.
 267 CoreBug ReportHigh HF6-Updater.pnd loses pnd_run.sh Closed
100%
Task Description Several users have reported that running HF6-Updater.pnd leads to a missing /usr/pandora/scripts/pnd_run.sh Possibly the file is locked by the Updater itself when installing pandora-libpnd_1.0-r56.5_armv7a.ipk Forum thread: http://boards.openpandora.org/index.php?/topic/5652-hotfix-6-final-released/page__view__findpost__p__99313
 268 CoreBug ReportLow HF6: error in op_power.sh Closed
100%
Task Description When powering the system off after it has been in low power state once, an error is reported by op_power.sh, line 173. Unfortunately I don't have the full message as it's visible on the console only for a short time before the screen turns off. From looking at the script, the "fi" in the last line might be superfluous.
269CoreBug ReportLowThunar Slow ExitUnconfirmed
0%
Task Description Thunar takes a long time going back to minimenu on exit. You don't notice this when in XFCE but then you are always in the GUI not returning to it. This started in Hotfix 6 Alpha4 I believe
270CoreBug ReportVery LowPower-slider & lid-close events: XFCE observes user set...New
0%
Task Description STATUS QUO: If you are in XFCE and hold the power slider for 3 seconds, you thereby trigger the shutdown command. For 3 more seconds a dialogue box gives you the chance to abort the shutdown ("Shutting down in 3…2…"). Now in MiniMenu no direct shutdown key is available. You first have to quit the running app (via PANDORA key), then call up the menu (via SELECT key), and then navigate to "Shutdown" and confirm it (by B or ENTER). INQUIRED BEHAVIOR: 1) Thanks to the very recent MiniMenu speedups, these 4 consecutive user interaction steps can now at least be be executed a lot faster. Nevertheless, offering a 1-button-interaction (via power slider) too, would be nice. Could you please make that available to MiniMenu? And in general: Make this power-slide-event available to any possible GUI, so that not each GUI has to implement this by itself, but rather the OS catches this event and handles it uniformly, except if a certain GUI WANTS to establish an exception to the rule. 2) Also the "Lid-Close-Settings" seem to be ignored by MiniMenu. MiniMenu seems to have the action "Turn off screen" hardcoded to that event. Please make MiniMenu observe the user settings from "Lid-Close-Settings". RELATED SOURCE CODE FILES (to my knowledge): op_lid.sh op_power.sh op_bright_up.sh op_bright_down.sh
 277 CoreBug ReportMedium SuperZaxxon B3: minimenu does not scan all folders Closed
100%
Task Description Using SuperZaxxon beta3 (already observed it with beta2) it seems as if minimenu is not scanning all folders (and subfolders) correctly. Please have a look at this post for more information: http://boards.openpandora.org/index.php?/topic/7558-superzaxxon-beta-2-released/page__st__140#entry138597
 278 CoreBug ReportLow Kernel 3.2.x: broken middle click on right nub Closed
100%
Task Description Using kernel 3.2.x middle click with the right nub is no longer working. With the "old" kernel you get a middle click when pushing the right nub down, this is no longer the case when eg using SuperZaxxon Beta3 (was already the case in SuperZaxxon Beta1 with kernel 3.2.1). As long as you are using kernel 2.6.27.x middle click is working as expected.
290CoreBug ReportMediumgnome-mount not availableUnconfirmed
0%
Task Description In GTK applications, such as Truecrypt, NoteCase Pro or Mousepad, the file open / file save dialogs have shortcuts to mounted file systems on the left side. If clicking such a shortcut entry, the corresponding file system's contents are shown in the right dialog pane. This works for file systems, which were available at boot time. For file systems mounted after booting, e.g. by inserting an SD card or connecting a USB drive, when clicking such an entry, an error message appears saying "Could not mount [volumen name] Failed to execute child process 'gnome-mount' (No such file or directory)" This is healed by sudo opkg install gnome-mount (which instals gnome-mount, nautilus, gvfsd-ftp, gvfs (upgrade), and a lot of libs (upgrades).. This has been seen in SuperZaxxon release 1.5, not in Beta3 (but Beta3 is the only choice in Flyspray's dropdown currently). I reported that error for HF6 I think, and it seemed to be fixed in SuperZaxxon Beta5. A regression?
291CoreBug ReportMediumroot-owned pndrun_...out file makes PND refuse startingAssigned
0%
Task Description If a PND has been run as root before (using pnd_run.sh from a root shell) and afterwards it is invoked the normal way, the PND doesn't start, because the .out file cannt be overwritten: /usr/pandora/scripts/pnd_run.sh: line 26: /tmp/pndrun_firefox.out: Permission denied Desired solution: .out file is silently overwitten. Maybe, if that's not possible, create another .out file with a different name (added counter, for example). Seen in SuperZaxxon relese 1.5, not in Beta3 as this task is flagged, but there is no choice besides Beta3.
292CoreBug ReportLowCan't seek in ogg files using pygame / SDLUnconfirmed
0%
Task Description Using pygame I try to play a music file starting from some position in the middle:: import pygame pygame.init() pygame.mixer.init() pygame.mixer.music.load('some_file.ogg') pygame.mixer.music.play(0,60) This should start playing the file from the firs minute, instead on the pandora the file plays from the start. I've tried the same code in a debian (sid) chroot (from extend utils) and it works correctly, as it does on my pc (debian wheezy). I suspect that the issue may be present also in .next (I've done a very quick test on a friend's pandora). Some relevant version numbers: * libogg.so.0.6.0 (on debian libogg.so.0.8.0) * libSDL_mixer-1.2.so.0.10.1 (on debian libSDL_mixer-1.2.so.0.12.0)
 294 CoreBug ReportLow Left nub not working with kernel 3.2 Closed
100%
Task Description Left nub doesnt work when powering on into SuperZaxxon Final with kernel 3.2. Rebooting into kernel 2.6 fixes it until sleeping or powering off. After which rebooting into 2.6 is once again necessary to get the left nub working.
297CoreBug ReportLowpandora button and taskbar autohideUnconfirmed
0%
Task Description When the taskbar is set to autohide, the Pandora button does not bring up the menu anymore.
299CoreBug ReportLowrun_pnd.sh does not follow PXML.xml or "-d"-ParameterAssigned
0%
Task Description I call pnd_run.sh with a pnd. The application directory will invariably be /media/SD/pandora/appdata/, no matter if the PXML.xml specifies a different appdata path. Also, the parameter -d for run_pnd.sh is not followed, either. I tried with vlc.pnd from the app store and with Dosbox74.pnd. UPDATE: Original submission contained a wrong filename reference. Corrected that typo to the filename intended by the submitter. Admin: porg.
300CoreBug ReportLowSuperZaxxon interprets on-disk FAT32 filenames differen...Unconfirmed
0%
Task Description With SuperZaxxon Final, I've noticed that stuff running on the Pandora like Thunar and bash are seeing a different interpretation of filenames on disk than when I remove the SD card and insert it into my desktop PC. Specifically, the following two mismatches appear to be present when using a FAT32-formatted SD card: First, the Pandora's VFAT support seems to be be operating with different case-handling settings than desktop Linux distros. Filenames set in all uppercase are forced to all-lowercase on the Pandora (whether they're set on the desktop or the Pandora) but inserting the card into a PC reveals that the. All-lowercase filenames set by software on the Pandora risk appearing in all uppercase when the card is inserted into a PC. (I think the grsync PND is what created the files in question) Among other things, this forces me to use EITHER the PND-based copy of grsync over the network OR a desktop-based copy of rsync with an SD card reader but not both because the kernel will preserve case differences like ALBION.BAT vs. albion.bat but rsync think they are separate files. (resulting in Flash-killing, time-wasting deletion and re-creation) It also makes for irritating entries like "zzt" in DOSBox or "ddr" in PyDance where I can't capitalize the filename properly without employing Department of Redundancy Department with "DDR Songs" or "ZZT.The.Game" as an excuse for mixed case. Second, SuperZaxxon Final seems to be using a different (though still Unicode-capable) filename encoding than all the desktop distros I've tried. Filenames are preserved properly and all-ASCII filenames are displayed properly in all cases, but any non-ASCII characters appear as gibberish on whichever system was not used to set them. I've confirmed this problem with these two filenames: - 03 - The Foggy Dew with Sinéad O'Connor.flac - Lucky Star - Native Misao (Touhou - Native Faith) ???????????????????×??????.mp4 As a Canadian user, my desktops use the "en_CA.utf8" locale and the only other distros I've found which have this problem are Slax and the 1.0 release of its successor, Porteus, both of which use ISO-8859-1 (latin1) for filenames.
301CoreBug ReportMediumMissing X keybinding for colon symbolUnconfirmed
0%
Task Description As verified with xev, an attached bluetooth keyboard can not generate colon (shift semicolon). xmodmap shows that (unlike a standard Linux system) shift-semicolon is mapped to NoSymbol. While it's find that there's a special symbol to get semicolon on the built-in keyboard, the other binding really should be there in support of attached keyboards.
 302 CoreBug ReportLow Correct keymap not available during login process Closed
100%
Task Description The correct keymap, as matching the characters printed on the keys, is available when running the First Boot Wizard, but not during login. This means that special characters like ! ( ) and so on, which you enter via Fn-[2nd key] cannot currently be used in a username nor password. My first experience with my Pandora was therefore that I had to reflash the OS due to this as I had locked myself out because I used a special character in my first chosen password. Also reported here: http://boards.openpandora.org/index.php?/topic/10112-question-mark/#entry188179
 303 CoreBug ReportLow pppd 2.4.3 has a bug, recommend upgrade to ppp 2.4.5  Closed
100%
Task Description pppd 2.4.3 doesnt auto reconnect (in my setup) even if configured to do so (persist). Found a ppp bug report confirming this ( http://ppp.samba.org/cgi-bin/ppp-bugs/resolved?id=1110;user=guest - "ppp-2.4.3 / pppoe not reconnecting") and that it has been fixed. I compiled pppd 2.4.5 and that reconnects just fine.
 304 CoreBug ReportLow bluetooth serial port sleep causes lost / frozen connec ...Closed
100%
Task Description I experienced (reliably) 3 times that if I had an idle ppp/rfcomm connection to my phone, it would eventually freeze so that the phone reported no active bluetooth connection and the pandora ppp would still think that the connection is active, but no data would flow. Killing pppd and re-trying would fail opening of the rfcomm link with "Host is down". Disabling & enabling bluetooth "fixed" this so that pppd worked again (so it is not the phone that was "down"). Adding these lines to op_bluetooth_work.sh (apparently atleast) fixed it for me: add between lines 14-15: echo 0 > /sys/devices/platform/omap_uart.0/sleep_timeout (or at any place during enable for that matter) And to disable (before exit 0, line 30) to save power when bluetooth is off and restore normal settings: echo 10 > /sys/devices/platform/omap_uart.0/sleep_timeout I remember mentioning this way back when I last tested bluetooth, but got a reply that this should not be needed because we have flow control between the bt chip and pandora. But if a sleeping serial port loses a character when somebody sends a burst to it, what could flow control do? If it reported not ready to receive, the character would never be sent (and things would freeze...). If it reports ready to receive (what I think it does) the character will be lost. One would need to periodically disable the serial port sleep (and enable ready to receive) for a moment to check for pending data, but I think this would use more power than keeping the serial port active and/or possibly cause way too big delays. I'm not really certain of this thing (whether this is a workaround, hack or a real fix... and whether my interpretation of what is happening is correct - i have no real proof), but I think that reporting what I've found is better than not. (And am I the only user of bluetooth with an old phone for internet (ppp+rfcomm, not pan)? ...)
 305 CoreBug ReportLow [PATCH] bluetooth startup doesnt restore enabled state Closed
100%
Task Description op_bluetooth.sh doesnt remember to call op_bluetooth_work.sh in the startup case. Patch inlined here (maybe broken, but for fast reading) and behind link: http://urjaman.dyndns.info/bluetooth-startup-fix.patch --- op_bluetooth.sh.org 2012-11-24 01:54:53.000000000 +0000 +++ op_bluetooth.sh 2012-11-24 02:06:51.000000000 +0000 @@ -7,8 +7,13 @@ cd "$HOME" if [ "$1" = "startup" ]; then - [ -f "$LOCK" ] && sudo /usr/sbin/hciconfig "$INTERFACE" up pscan 1>/dev/null && sudo /usr/sbin/bluetoothd || echo "Bluetooth: User has not enabled Bluetooth." - + if [ -f "$LOCK" ]; then + sudo /usr/pandora/scripts/op_bluetooth_work.sh 1 + INTERFACE="`hciconfig | grep "^hci" | cut -d ':' -f 1`" + sudo /usr/sbin/hciconfig "$INTERFACE" up pscan 1>/dev/null && sudo /usr/sbin/bluetoothd + else + echo "Bluetooth: User has not enabled Bluetooth." + fi else # Figure out if Bluetooth is running or not
 306 CoreBug ReportLow Issue with Network Notification pop-ups Closed
100%
Task Description Clicking on the button in a notification used when WiFi is enabled (such as the one stating that Wireless Networks were found), doesn't close the notification. In order to close it, I have to click the X button that's in the top-left.
308CoreBug ReportLowWireless Network being dropped asks for passwordUnconfirmed
0%
Task Description When a Wireless Network that is dropped because its signal strength isn't that good gets reconnected to, I am being asked to re-input the password for that network. It would be nice if it just used the password I gave to it when it was able to connect without popping up that dialog box.
 310 CoreBug ReportMedium mkdosfs is broken - creates 1GiB filesystems Closed
100%
Task Description When a partition is bigger than 2 or 4 GiB (can't recall now) it makes a "default" 1GiB filesystem. Propably missing large file support in the build. Also, the pandora sd card formatter is missing -F 32 so it makes (i think, it is some time from when I noticed this) FAT16 partitions...
 311 CoreBug ReportMedium [PATCH] Thunar configurable trash Closed
100%
Task Description Not my work, but since I think my reply to ED on the forums will get buried I made this report. The post with patch: http://boards.openpandora.org/index.php/topic/11189-its-arrived-questions/?p=210363
 312 CoreBug ReportLow Special character in password Closed
100%
Task Description problem: setting a username and password using first setup wizzard it's possible to set special character like @#*%/ ect... the login manager don't support this characters, so you need to reset the device. possible solution: 1. disable the possibility of setting special characters. 2. implement special characters in login manager.
 313 CoreBug ReportLow WiFi LED Not Triggered on First Activation Closed
100%
Task Description The first time WiFi is enabled after boot, using either the the config button menu or the Toggle WiFi menu option the WiFi LED does not light up. (though the WiFi itself does work) Once it has been enabled and disabled for the first time, it will work normally for subsequent uses of the WiFi toggle. If the Toggle WiFi script is launched for the first time from the terminal the LED does light up. This is the case in SuperZaxxon 1.53 with all current upgrades applied, and reportedly since the introduction of SuperZaxxon. checking /sys/class/leds/pandora::wifi/trigger while the WiFi is enabled but the LED off shows that the trigger has been successfully set to phy0radio Also noted while investigating this: If Wifi is enabled for the first time from the terminal the following errors are generated by /etc/init.d/wl1251-init Usage: insmod filename [args] find: /lib/modules/3.2.30/updates: No such file or directory Usage: insmod filename [args] find: /lib/modules/3.2.30/updates: No such file or directory Usage: insmod filename [args] find: /lib/modules/3.2.30/updates: No such file or directory Usage: insmod filename [args] find: /lib/modules/3.2.30/updates: No such file or directory Usage: insmod filename [args] Usage: insmod filename [args] Usage: insmod filename [args] find: /lib/modules/3.2.30/updates: No such file or directory Usage: insmod filename [args] find: /lib/modules/3.2.30/updates: No such file or directory Usage: insmod filename [args] find: /lib/modules/3.2.30/updates: No such file or directory Usage: insmod filename [args] find: /lib/modules/3.2.30/updates: No such file or directory Usage: insmod filename [args] The commands that generate these errors are only executed if the mac80211 module is not already loaded - and that module is not unloaded when wifi is disabled. This seems to be unrelated to the issue being reported, however I can't see any cause for the issue at all, so I figured it was worth including it in the report anyway.
 314 CoreBug ReportLow Pandora-Button doesn't open XFCE menu Closed
100%
Task Description If you enable the "disapear automaticaly" feature in the XFCE panel, the Pandora button doesn't open the main menu anymore and you need to open it manually with the cursor.
315CoreBug ReportMediumPairing bluetooth SPP devices doesn't work with XFCEUnconfirmed
0%
Task Description Hi, sadly the XFCE bluetooth manager seems to have problems with pairing simple SPP devices (an BT GPS mouse here). 1. Enable BT 2. BT Manager -> Add new device 3. Confirm Dialog and wait for scanning 4. Pick device 5. Select PIN options -> "0000" (here for me) In next step the dialog still asks you to enter a random PIN at your BT device (which is impossible here). Thus it seems, that the XFCE dialog makes troubles, I tried it with 2 different GPS. Pairing the GPS manually works fine: sudo rfcomm connect rfcomm0 00:18:E4:26:5F:14
 317 CoreBug ReportMedium After disabling USB-host current still flows into USB d ...Closed
100%
Task Description On my Pandora, due to bad internal WiFi, I use an Edimax EW-7811Un USB WiFi adapter, which has a status-LED, flickering according to the network activity. After disabling USB-host through the settings menu, the WiFi functionality is gone, but the device's LED is still on. So some current must still flow into the USB device. The LED now has a permanent light, no flickering! This lack of "device intelligence" indicates that the device was indeed turned off, just current flowing directly to the LED circuit unaltered). I can repeat the aforementioned steps many times, the behavior is the same. As soon as I then first physically unplug and reinsert the device, the LED remains off eventually. From then on, every further issuing of "Disable USB-host" through the settings menu turns the device LED completely off. Smells like a kernel bug to me! As it requires one real un/re-plugging, from then on works ok.
320CoreBug ReportLowBluetooth connection lost after wake-up from sleep modeUnconfirmed
0%
Task Description

When an internet connection was established through a mobile phone (Android, tethering) via bluetooth, the internet connection will not be re-established when the Pandora was sent to sleep and woken up again. The Pandora seems to be connected to the mobile phone, but no internet connection can be established, not even when manually trying to connect. The only way out is to disable bluetooth and enable it again.

I had similar problems with WiFi, before notaz tweaked the system (http://boards.openpandora.org/index.php/topic/11416-wifi-mysteries-resolved-once-and-for-all-—-power-saving-is-clearly-the-culprit/?p=249036).

Showing tasks 201 - 250 of 311 Page 5 of 7<<First - 3 - 4 - 5 - 6 - 7 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing