All Projects

IDProjectCategoryTask TypeSeveritySummaryStatusProgressOperating System
329OpenPandora Main OSCoreBug ReportLowScreen turns on when LCD closedUnconfirmed
Release 1 (Zaxxon) Task Description

Issue: The screen accidentally turns on even when the lid is closed.

How to reproduce: "Screen blanking" must be enabled! Close the lid, wait more than 10 minutes, tap either shoulder button.  This behaviour happens whether on charge or battery, at the desktop or running an application, provided that the "screen blanking" option is enabled.

Desired outcome: When the Pandora comes out of "screen blanking", it should restore the brightness to the same value that it was before blanking.

 195 OpenPandora Main OSCoreFeature RequestHigh Start re-recharge of battery sooner Closed
Release 1 (Zaxxon) Task Description Increase battery LVL_4 and LVL_3 threshold. After reaching 100%, in some cases the charge circuit enters "battery full" state, stops charging, and begins to discharge. This is not entirely unexpected behavior according to the spec sheet, although I don't fully understand exactly the situations in which it completes charging. Once the battery is full, the battery will begin discharging. The charge circuit automatically restarts the recharge once the voltage has gone below a certain level (crosses below the LVL_3 voltage threshold) The default LVL_3 voltage threshold is 3.902 volts which is at about 80-85% battery level as recorded by bq27500 chip. In my opinion, this is way too low. Setting the BCIMFTH2 register to 0xCB increases the voltage threshold to about 4.003 volts which is about 93%. Setting it to 0xDC may also be worthwhile, which is just over 95%. By default, if a user leaves their Pandora plugged in overnight, they may wake up to find their Pandora has stopped charging and the capacity has dropped to almost 80%, which can be quite startling to some users who will then report it as a bug. This change will ensure that it never drops below 93-95%, a much more acceptable level. Specific code changes suggested, in the /drivers/power/twl4030_bci_battery.c file, somewhere in the twl4030_bci_battery_probe function (or a function called by it), add the lines: /********************************/ #define KEY_FTH2 0x7F #define REG_BCIMFTH2 0x017 ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, KEY_FTH2, REG_BCIMFKEY); if (ret) return ret; ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, 0xDC, REG_BCIMFTH2); if (ret) return ret; /********************************/ (Move defines to the top, as appropriate)
 181 OpenPandora Main OSApplicationBug ReportLow Triple click in Thunar crash Closed
Release 1 (Zaxxon) Task Description Triple tapping (with the stylus) a directory in Thunar in icon or compact mode (not detail view) causes Thunar to close (crash) This is consistently repeatable: tapping three times in rapid succession on the same spot of the file causes the crash. It must be the exact same spot, as if double clicking, but a third tap is added. This can be triggered especially when a user becomes frustrated at mistapping, gets carried away, and taps too much.
 171 OpenPandora Main OSCoreFeature RequestMedium Update clock from hardware when restoring from low powe ...Closed
Release 1 (Zaxxon) Task Description The clock occasionally does weird things during low power mode, sometimes gaining time, sometimes losing. This is most likely a result of the CPU being reduced to 14Mhz and the system clock being unable to keep up. A convenient work around is to make a call to "/sbin/hwclock --hctosys" during wake-up to load the hardware clock back into the system clock. This may add an extra second or two to the wake-up time but will prevent confusion caused by clock being very incorrect.
 161 OpenPandora Main OSBase OSFeature RequestLow Add ftp to base OS Closed
All Task Description Include the netkit-ftp package so the Pandora has at least basic ftp functionality out of the box.
Showing tasks 1 - 5 of 5 Page 1 of 1

Available keyboard shortcuts


Task Details

Task Editing