All Projects

IDProjectCategoryTask TypeSeveritySummaryStatusProgressOperating System  asc
328OpenPandora Main OSCoreBug ReportLowXFCE desktop icons not displayed when logging on too qu...Requires testing
0%
Release 1 (Zaxxon) Task Description

It looks like XFCE cannot find the icons for links/launchers on the desktop, when the user logs on too quickly. This happens either when the session chooser at start-up is disabled, or when the session is being chosen quickly after the session chooser is being displayed (e.g. by pressing enter as soon as the chooser window pops up). The icons are probably not generated yet at that time point.

 

A simple workaround is adding the command "xfdesktop --reload" to autostart. Couls this be included in the next SuperZaxxon release or a hotfix?

329OpenPandora Main OSCoreBug ReportLowScreen turns on when LCD closedUnconfirmed
0%
Release 1 (Zaxxon) Task Description

Issue: The screen accidentally turns on even when the lid is closed.

How to reproduce: "Screen blanking" must be enabled! Close the lid, wait more than 10 minutes, tap either shoulder button.  This behaviour happens whether on charge or battery, at the desktop or running an application, provided that the "screen blanking" option is enabled.

Desired outcome: When the Pandora comes out of "screen blanking", it should restore the brightness to the same value that it was before blanking.

330OpenPandora Main OSCoreBug ReportLowNetworkManager crashes after suspend to RAMUnconfirmed
0%
Release 1 (Zaxxon) Task Description

Suspend to RAM uses less power than the low power mode, but the NetworkManager crashes often after the Pandora woke up from suspend to RAM.

This could be fixed with an update of NetworkManager.

331OpenPandora Main OSCoreBug ReportMediumHold switch key continuously sends X11 KeyPress events ...Unconfirmed
0%
Release 1 (Zaxxon) Task Description

When put into Hold mode, X11 handles the power switch as if it's being pressed, and it generates lots of keypress events, passing them to the foreground application. Since /dev/input/eventX does not seem to continuously trigger, I'm guessing it's due to key repeat.

To reproduce:

  • Install xev and open it in the terminal
  • Put the power key in HOLD mode
  • Notice the "time" value changing rapidly

In addition to causing more work to X, it also floods the active application with key presses, resulting in increased CPU usage. In my test, switching to HOLD while Firefox is in the foreground causes it to use 6% CPU and X an additional 2.5%.

In addition, the key-press events continue even after the switch is taken off HOLD until another key is pressed.

A possible solution to this is to blacklist the power-button event device, to prevent evdev from listening to it (the key is handled by pndevmapperd).

336OpenPandora Main OSCoreBug ReportMediumTouch screen sensitivity too lowUnconfirmed
0%
Release 1 (Zaxxon) Task Description

The touch screen requires to be used with the stylus or another sharp object. Even if I need to click a desktop icon, and could as well use my finger, the touch screen won't react to my finger at all (even if pressed quite hard).

104OpenPandora Main OSBase OSBug ReportLowAAC decoder libfaad doesn't appear to be compiled as fi...Unconfirmed
0%
Release 1 (Zaxxon) Task Description FAAD2 appears to not be compiled with fixed point decoding. My version of libfaad compiled with fixed point used 2-3x less cpu than the provided one. It's not enough to provide the switch to the configure script. the file libfaad/common.h has to be edited and a define uncommented. Line 68 in the v2.7 source. /* COMPILE TIME DEFINITIONS */ /* use double precision */ /* #define USE_DOUBLE_PRECISION */ /* use fixed point reals */ //#define FIXED_POINT
118OpenPandora Main OSBase OSFeature RequestLowadd sdl-perl to the base OSUnconfirmed
0%
Release 1 (Zaxxon) Task Description Hi there, Many games depend on sdl-perl. Perl and sdl are part of the base OS, but not not the connection between the two. Cheers, sebt3
124OpenPandora Main OSBase OSBug ReportLowifup doesn't like dhclientUnconfirmed
0%
Release 1 (Zaxxon) Task Description I added: iface usb0 inet dhcp And ran: ifup usb0 But dhclient simply prints usage.
156OpenPandora Main OSBase OSFeature RequestVery LowAsk to format SD CardUnconfirmed
0%
Release 1 (Zaxxon) Task Description When I have received my Pandora, I got an SD Card but it was not formated. I didn't have any card reader so I didn't now what was wrong (the Pandora or the SD Card). When an unformated SD Card is inserted in the Pandora, it should be nice to ask if we want to format it.
158OpenPandora Main OSBase OSBug ReportMediumRefresh rate and BPPUnconfirmed
0%
Release 1 (Zaxxon) Task Description On OS Zaxon (hotfix 3). With "xfconf-query", the resolution is 800x480@60 Hz. But with the tool in the menu "Settings" -> "Display", the resolution is 800x480@0 Hz. With Java (opensdk-6-jre 6b18-1.8), GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayModes() return 1 display mode that is 800x480@0 Hz with a BPP of -1. It seems to be the reason that GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayMode() return null and when closing a java application that goes in fullscreen mode to throw an exception (invalid display mode).
159OpenPandora Main OSBase OSBug ReportMediumSystem > Run PND Application menu item does nothingUnconfirmed
0%
Release 1 (Zaxxon) Task Description With both Hotfix 3 and Hotfix 4 Beta the Run PND Application menu item fails to do anything. Possibly related problem is that PND files newly copied to SD card are not recognized and entered on desktop as expected. When you go to Thunar and right click - execute the PND file, nothing happens. Possible fix by copying the PND to another folder on the SD card with Thunar. This makes at least two PND files I had work. Still no response with "Run PND Application" menu, though.
296OpenPandora Development OSBackend / CoreBug ReportLowupowerd fails to open file /proc/timer_statsUnconfirmed
0%
Release 1 (Zaxxon) Task Description Hi, Upowerd spams each 10 seconds with warning "failed to open file '/proc/timer_stats'". According to https://bugzilla.redhat.com/show_bug.cgi?id=826191 this feature can be activated in kernel. I'm not sure if upowerd can be told not to check this feature, I haven't been able to find an specific option for that so far. Activating this option in kernel, this warning should be eliminated. It would help give upowerd data it needs, and also it will stop filling up the log, which then I guess interferes with power saving (active file access while writing into log...).
309OpenPandora Development OSBackend / CoreFeature RequestMediumPlease add xz support in the kernel so squashfs images ...Unconfirmed
0%
Release 1 (Zaxxon) Task Description Please add support for xz compression in the kernel so squashfs tools can compress better the png images.
105OpenPandora Main OSApplicationFeature RequestVery LowNubs feature requestNew
0%
Release 1 (Zaxxon) Task Description The 'Nubs' application needs a setting for deadzone. Using the nubs in First person shooters the nubs trigger in directions when not even touched. An adjustment for deadzone would eliminate accidental movement caused by vibration. Also, application profiles for the nubs would be very useful. Different apps use the nubs in different ways and it would be great to not have to go and change settings before launching each application.
135OpenPandora Main OSApplicationBug ReportLowOOM Killer causes loss of items in xfce4-panel configur...Unconfirmed
0%
Release 1 (Zaxxon) Task Description When the Pandora runs out of memory and the Out-Of-Memory killer fires, the Applications/Settings/xfce4/panel/panels.xml loses the entries for the menu button and the power monitor.
216OpenPandora Main OSApplicationTo Do (Reminder)LowToDo - SD manager tool (backup homedir/restore, prepare...New
30%
Release 1 (Zaxxon) Task Description Should make up a simple zenity script tool .. - backup -> pick SD -> backs up current user's homedor to SD. (tar.gz format so permissions can be kept; not cpio/etc, too annoying for user.) -> keep rolling, or just one copy? - restore -> pick SD -> pick user -> confirm -> wipe home and restore with version from tarball? (or just unpack in-place, so existing new files are kept) -> prepare SD -> pick SD -> mkdir /pandora/menu and /pandora/desktop
217OpenPandora Main OSApplicationFeature RequestLowAdd Mounting and unmounting context options for PND'sUnconfirmed
0%
Release 1 (Zaxxon) Task Description It'll have to be in the SKEL. /etc/skel/Applications/Settings/Thunar/uca.xml People can replace the contents of their current uca.xml file with the following to gain this functionality now. /home/[USERNAME]/Applications/Settings/Thunar/uca.xml Terminal Open Terminal Here exo-open --working-directory %f --launch TerminalEmulator Example for a custom action * emblem-symbolic-link Mount PND /usr/pandora/scripts/pnd_run.sh -p %f -m && thunar /mnt/utmp/ *.pnd;*.PND gtk-jump-to-rtl Unmount PND /usr/pandora/scripts/pnd_run.sh -p %f -u *.pnd;*.PND
218Additional ApplicationsApplicationBug ReportLownc (netcat) can't create tcp connectionsUnconfirmed
0%
Release 1 (Zaxxon) Task Description Zaxxon Hotfix 5. Example (dropbear is running): ------------------------ ~# nc -vvvv localhost 22 Notice: Real hostname for localhost [127.0.0.1] is localhost.localdomain Total received bytes: 0 Total sent bytes: 0 ~# telnet localhost 22 SSH-2.0-dropbear_0.51 ------------------------ All required libraries seem present, strace output is inconclusive.
222OpenPandora Main OSApplicationBug ReportLowLogin Screen does not accept all symbols of the form Fn...Unconfirmed
0%
Release 1 (Zaxxon) Task Description Problem - Login Screen does not accept all symbols of the form Fn+char Reproducibility - always Actual results - the characters :?#|$€"‘£¥@!_ do not work on the Login Screen with the Pandora's keyboard. When fn then the corresponding character is pressed, nothing is added to the string. Expected results - these characters should appear just like any other character Work Around - an external keyboard was able to enter these characters Aditional Information - While the characters :?#|$€"‘£¥@!_ do not work, the characters ;/\'-+=`() work just fine.
238OpenPandora Main OSApplicationFeature RequestLowQuick key access to OK in dialoguesUnconfirmed
0%
Release 1 (Zaxxon) Task Description PROBLEM DESCRIPTION: In many GUI dialogues the default action button (OK, ACCEPT, YES, …) cannot be triggered with a simple key press. Pressing ENTER triggers the element which has focus (usually the first dialogue element), but not the default action, as most computer users would expect! MY WORKAROUND MEANWHILE: Press ALT plus the underlined letter of your desired action. But that's not very convenient as the underlined letter needs to be looked upon first, as the button label can differ from situation to situation (ACCEPT, OK, YES, …) and then 2 keys need to be pressed. SUGGESTED SOLUTION: The custom of many operating systems should be adapted on the OpenPandora as well. SPACE triggers the currently focused element (whatever that may be: list item, radio button, checkbox, etc), and ENTER triggers the default action of that dialogue. Or even better use the Pandora specific A/B/Y/X keys cleverly in those dialogues/selections. I don't know whether there is a standard functionality assignment within this key-group, in MiniMenu "B" is start/confirm, I do not know of any other standard assignments yet.
239OpenPandora Main OSApplicationFeature RequestLowMiniMenu: New option: Grid stop horizontalUnconfirmed
0%
Release 1 (Zaxxon) Task Description I am suggesting the new option "Grid stop horizontal" for MiniMenu with the following possible settings and their effect. Yes -> If the boundary is reached the focus remains there. No -> If the boundary is reached the focus starts at the opposite side again. Jump to next/prev line -> If the boundary is reached the focus jumps to the next/previous line and the opposite side.
240OpenPandora Main OSApplicationFeature RequestLowMiniMenu shall return into full screen mode (more quick...Unconfirmed
0%
Release 1 (Zaxxon) Task Description If you set MiniMenu's option "Live (not exit) on app run?" to YES, and you quit an application and return to the still running MiniMenu, it runs in windowed mode, and takes about 2 seconds until it goes into full screen mode again. This delay should at best be not noticeable at all, at most 0-1 seconds.
242OpenPandora Main OSApplicationFeature RequestMediumPressing SHIFT + any key in sequence creates the modifi...Unconfirmed
0%
Release 1 (Zaxxon) Task Description ISSUE ENVIRONMENT: If you hold your Pandora in your hands, you only have your thumbs for typing, hence your typing abilities are quite limited. It is hard to press more than 2 keys, and hard to press 2 keys on the same side, as your second thumb does not reach the opposite side all too easy (except you have a basketball player's hands). The modifier keys Start/ALT Select/CTRL Pandora/(META, I guess?) are in the middle of the keyboard, hence the can easily pressed together with another key. But SHIFT lies at an ergonomically problematic side (left boundary). Hence hard to press with other left side keys. SUGGESTED SOLUTION: I suggest that Pandora OS offers an optional and configurable input help. [1|2|3 presses | hold for duration x] SHIFT [timeout y] [modifier key 2] [timeout z] key Produces the same result like SHIFT + modkey2 + key Very likely modifier key 2 and timeout z are not necessary, as you can trigger the SHIFT hold (by your defined action), and then press the modifier key 2 and the other key at once, as the other modifier keys are laid at a central (ergonomically better) position.
243OpenPandora Main OSApplicationFeature RequestMediumMiniMenu: Pressing successive character keys should com...Unconfirmed
0%
Release 1 (Zaxxon) Task Description Imagine this tab content: Nubs, Pandora Input, PNDstore. CURRENT BEHAVIOR: Pressing "P" and "N" is succession jumps to "Nubs" eventually, as it first jumps to the first "P" item ("Pandora Input"), then to the first "N" item, "Nubs". DESIRED BEHAVIOR: That it acts like in most Linux file browsers or the Mac OS X Finder. In detail: Pressing "P" and "N" within a certain time limit should combine them to the string "PN" and jump to the first item which starts with that string, i.e. "PNDStore". If no item matches, reduce the combination string by one character, try to match again, if that doesn't match, try matching again with one character less, ... , until only one character is left, and if that one doesn't match jump to the nearest previous lexicographical character, which matches.
244OpenPandora Main OSApplicationFeature RequestLowInclude man and the manpagesUnconfirmed
0%
Release 1 (Zaxxon) Task Description The command line environment of the default OS does not include the command "man" and the respective manpages of the installed programs. I personally often use manpages, as I hardly remember the syntax/arguments of all programs I use. Having them would be very convenient! EVALUATING NEEDED STORAGE AMOUNT Some may argue that storage space is quite limited on the NAND. Yes I agree. Hence the number of included programs is limited too. Hence it would not be all too many manpages. When I press TAB into an empty Terminal prompt, I get 1406 possibilities, which is about the amount of available commands/programs if we ignore aliases, etc. Multiply that with an average of 20 kb per manpage, and you get about 30 MB in total. With compression this could possibly be brought down to 15-20 MB. POSSIBLE SOLUTIONS A) Store into the NAND the manpages of core OS CLI programs only, and not all the library/system/etc documentation. B) Include only the man command into the core OS, and compile/configure it in such a fashion, that it finds the manpages within non-NAND media (SD card, USB volume, etc). b1) Specify that it simply looks into a certain path within the /media/*/pandora/ structure. b2) Or offer PND packages like man-core.pnd, man-extended.pnd,... you get the idea or even man-custom.pnd (which would look into its appdata or a certain path for custom added manpages, to somehow get the b1 approach within the PND approach).
246OpenPandora Main OSApplicationBug ReportMediumClipboard content of closed app gets tossed instead of ...Unconfirmed
0%
Release 1 (Zaxxon) Task Description FLAWED BEHAVIOUR: Copy and paste only works between 2 active applications. This is very limiting! If you are in the single task oriented MiniMenu you have no chance at all to share the clipboard between apps! If you are in the multi tasking oriented XFCE desktop environment you can only share between apps running in parallel! Not with apps which started after the source app has been terminated. DESIRED BEHAVIOUR: The clipboard content (within reasonable limits of course) should remain, regardless of the source application, so that you can paste at any later moment into any application.
253OpenPandora Main OSApplicationFeature RequestMediumSwitch GUI: Intelligent automatic choiceUnconfirmed
0%
Release 1 (Zaxxon) Task Description If only 2 GUIs are available, skip the user selection and switch right into the only other GUI. What else would the user want?! Right! If more than 2, already set the focus in the GUI list to the next possible item.
258OpenPandora Main OSApplicationBug ReportLowMiniMenu: Pressing key multiple times only cycles focus...Unconfirmed
0%
Release 1 (Zaxxon) Task Description EXAMPLE: MiniMenu with the option "Subcategories as folders" YES, and the current active tab i.e. "Game" lists: Subgenre folders: ActionGame, AdventureGame, ArcadeGame, BlocksGame, … App items: Abuse, Amoeboax, Arkaniod, Bloqus, … THE BUG: Pressing "A" multiple times only cycles the focus between folders (ActionGame, AdventureGame, ArcadeGame), but never reaches the app items (Abuse, Amoeboax, Arkaniod). BESIDES THIS BUG in the current keyboard item selection logic, I kindly inquire to implement: FS#243
262OpenPandora Main OSApplicationBug ReportMediumMiniMenu: 1) "Notes line" cannot be deleted. 2) Note li...Unconfirmed
0%
Release 1 (Zaxxon) Task Description Steps to reproduce the bug(s): 1) In MiniMenu select an arbitrary app. 2) Press SPACE to bring up the contextual menu. 3) Select "Edit notes line 1". 4) Insert your string and confirm. 5) Now at a later time you may decide to remove your note line again. Therefore you select the same app again in MiniMenu, then repeat steps 2-3, but this time: a) Erase all characters so that you get an empty string and then confirm. RESULT: Your change is simply ignored! There should be a possibility within MiniMenu to remove/reset note lines, the simplest being to simply accept an empty string as an input, that's what an average user will try if s/he does not find a dedicated "Delete note line" command. b) As a workaround I tried something and detected yet another bug! As I could not create an empty string, I simply created a note line only containing 1 SPACE character (=the string " ") and confirmed. This got accepted. If MiniMenu is in detailed view mode (press the A-button or TAB in order to bring it up, if it is not already there) and you slide over an app whose note line is " ", MiniMenu crashes! Maybe the bug is connected with the writing to / the parsing from the .OVR (override) files which MiniMenu creates for the affected files, as the separating value in OVR files seems to be TAB, and SPACE is also WHITESPACE, therefore some parsers probably skip/misinterpret this, and MiniMenu then catches an unexpected situation! WORKAROUND: If you ran into the problem, that you cannot get rid of the note lines anymore, simply start a file browser of your choice, navigate to the location of the affected .PND file and find its sister .OVR (override) file and delete it or edit it accordingly!
265OpenPandora Main OSApplicationBug ReportMediumMiniMenu: Flawed tab display of sub-categories if they ...Unconfirmed
0%
Release 1 (Zaxxon) Task Description I assigned personal subcategories to some of my games. Some of those subcategories share the same beginning string, i.e: Shooter, ShooterBallistic ShooterScoller. MiniMenu displays those subcategories with flaws! See the ASCII screenshots below. Note: The star symbols indicate the currently active selection. The main category tab "Game" being active: ---------------------------------------------------------- | All | Audio | AudioVideo | Education |*Game*| Graphics | ---------------------------------------------------------- ActionGame AdventureGame ArcadeGame BlocksGame ... Shooter ShooterBallistic ShooterScroller ... GameA GameB GameC ... ---------------------------------------------------------- Now if I navigate into the sub-category "Shooter", everything normal: ---------------------------------------------------------- |*Shooter*| ---------------------------------------------------------- .. ShooterA ShooterB ShooterC ... ---------------------------------------------------------- But if I navigate to the sub-category "ShooterBallistic", strangely MiniMenu shows 2 tabs, "Shooter" and "ShooterBallistic", and jumps right into "Shooter". ---------------------------------------------------------- |*Shooter*| ShooterBallistic | ---------------------------------------------------------- .. ShooterA ShooterB ShooterC ... ---------------------------------------------------------- In order to reach my intended tab "ShooterBallistic" I need to navigate to it again. Annoying. There the contents are as expected: ---------------------------------------------------------- | Shooter |*ShooterBallistic*| ---------------------------------------------------------- .. ShooterBallisticA ShooterBallisticB ShooterBallisticC ---------------------------------------------------------- The flaw is the same for all other sub-categories beginning with "Shooter...". All have the flaw as shown in the example "ShooterBallistic", only that it is themselves instead of "ShooterBallistic". One more example to be perfectly clear: ---------------------------------------------------------- | Shooter |*ShooterScroller*| ---------------------------------------------------------- .. ShooterScrollerA ShooterScrollerB ShooterScrollerC ----------------------------------------------------------
295Additional ApplicationsApplicationBug ReportLowMaking the pnd file executableUnconfirmed
0%
Release 1 (Zaxxon) Task Description Hi there, it would be neat if an rc script containing this could be added to the os (and run on startup) : if [ ! -e /proc/sys/fs/binfmt_misc/register ];then modprobe binfmt_misc mount -t binfmt_misc none /proc/sys/fs/binfmt_misc fi echo ":squashPND:M::hsqs::/usr/bin/pnd_run:">/proc/sys/fs/binfmt_misc/register That render all the SquashFS executable directy by clicking them on the icon. Sadly there is no way to pass the arguments to the apps (as pnd_run dont support that). A similar line could be added to support iso pnd.
333Additional ApplicationsApplicationBug ReportLow30 sec 95% cpu spike by openbox upon "xmodmap ~/.pndXmo...Unconfirmed
0%
Release 1 (Zaxxon) Task Description

Command is essencial when switching between kb layouts

I'm using https://github.com/openpandora/meta-openpandora-vendor/blob/master/recipes-openpandora/openpandora-system/openpandora-skel/pndXmodmap

strace (openbox process): https://gist.github.com/anonymous/9925061

xmodmap latest version (1:1.0.4-r0.5) reinstalled

335OpenPandora Main OSApplicationBug ReportLowEvince 2.30 crashes when fullscreenUnconfirmed
0%
Release 1 (Zaxxon) Task Description

Hi,

Evince 2.30 often crashes with the following error message:

(evince:2834): EvinceDocument-CRITICAL **: ev_image_save_tmp: assertion `GDK_IS_PIXBUF (pixbuf)' failed
Segmentation fault

How to reproduce: open Evince,  select a PDF file, go into fullscreen mode, then click into the body of the document.

Cheers, Magic Sam

191OpenPandora Development OSCoreBug ReportLowAdd XInput extention to allow pressure sensivity in app...Unconfirmed
0%
Release 2 (.next) Task Description Please see this for GTK apps : http://library.gnome.org/devel/gdk/stable/gdk-Input-Devices.html And see this thread : http://boards.openpandora.org/index.php?/topic/372-xournal-pdf-annotations/page__gopid__6836#entry6836
206OpenPandora Development OSBackend / CoreFeature RequestLowFirst Boot Wizard - Controls assignment screen neededResearching
0%
Release 2 (.next) Task Description Since I don't have a Pandora, I used the videos that EvilDragon has shown to discover this issue. Nowhere did I see in the First Boot Wizard that it tells you what the default controls in XFCE does like for example how the mouse moves and clicking using the nubs. It also doesn't tell you what the gaming buttons do (L and R included). Would be nice to know for first time users. It should also tell a user if they want to change these setting to look at a specific place after the wizard is done. We shouldn't have the users figure the controls and such out by trial and error. When is that ever fun? :)
293OpenPandora Development OSBackend / CoreFeature RequestMediummigration to systemd: populate-volatile.shUnconfirmed
0%
Release 2 (.next) Task Description populating volatile requires execution of initialization script, which I had to minimally modify for it to start working. I am placing that file to /usr/pandora/init/ folder. Any suggestions for better place for custom init scripts? :) This script fixes utmp (and pndnotifyd) problem for systemd image Noticed problems (TODO): boot sequence recreates cache, run and tmp dirs before populate-volatile inits them. One of the solutions would be to deploy system with symlinks already in place (pointing to /var/volatile subdirs) ------------- Deployment: delete: /etc/init.d/populate-volatile.sh /etc/rcS.d/S37populate-volatile.sh /var/{cache,lock,log,run,tmp} add: /etc/systemd/system/populate-volatile.service /usr/pandora/init/populate-volatile.sh symlink: /etc/systemd/system/basic.target.wants/populate-volatile.service to /etc/systemd/system/populate-volatile.service URLs for files: http://dl.dropbox.com/u/18781412/next/populate-volatile.service http://dl.dropbox.com/u/18781412/next/populate-volatile.sh
250OpenPandora Main OSApplicationFeature RequestMediumFile Browser Thunar - Trashing file crosses filesystem ...Researching
30%
Release 2 (.next) Task Description Trashing a file/folder seems to MOVE it to a certain trash directory on the MAIN VOLUME, rather then the ORIGINATING VOLUME, hence this can result in a COPY RATHER THAN A MOVE operation, if the trashed file originates from a filesystem other than the main filesystem! This is very inefficient and faulty as it is: a) Very time consuming b) And in case of large files this operation can even fail due to not enough free space on the main volume.
Showing tasks 51 - 87 of 87 Page 2 of 2 - 1 - 2

Available keyboard shortcuts

Tasklist

Task Details

Task Editing