|
336 | OpenPandora Main OS | Core | Bug Report | Medium | Touch screen sensitivity too low | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
The touch screen requires to be used with the stylus or another sharp object. Even if I need to click a desktop icon, and could as well use my finger, the touch screen won't react to my finger at all (even if pressed quite hard). |
|
335 | OpenPandora Main OS | Application | Bug Report | Low | Evince 2.30 crashes when fullscreen | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Hi,
Evince 2.30 often crashes with the following error message:
(evince:2834): EvinceDocument-CRITICAL **: ev_image_save_tmp: assertion `GDK_IS_PIXBUF (pixbuf)' failed
Segmentation fault
How to reproduce: open Evince, select a PDF file, go into fullscreen mode, then click into the body of the document.
Cheers, Magic Sam |
|
333 | Additional Applications | Application | Bug Report | Low | 30 sec 95% cpu spike by openbox upon "xmodmap ~/.pndXmo... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Command is essencial when switching between kb layouts
I'm using https://github.com/openpandora/meta-openpandora-vendor/blob/master/recipes-openpandora/openpandora-system/openpandora-skel/pndXmodmap
strace (openbox process): https://gist.github.com/anonymous/9925061
xmodmap latest version (1:1.0.4-r0.5) reinstalled |
|
331 | OpenPandora Main OS | Core | Bug Report | Medium | Hold switch key continuously sends X11 KeyPress events ... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
When put into Hold mode, X11 handles the power switch as if it's being pressed, and it generates lots of keypress events, passing them to the foreground application. Since /dev/input/eventX does not seem to continuously trigger, I'm guessing it's due to key repeat.
To reproduce:
- Install xev and open it in the terminal
- Put the power key in HOLD mode
- Notice the "time" value changing rapidly
In addition to causing more work to X, it also floods the active application with key presses, resulting in increased CPU usage. In my test, switching to HOLD while Firefox is in the foreground causes it to use 6% CPU and X an additional 2.5%.
In addition, the key-press events continue even after the switch is taken off HOLD until another key is pressed.
A possible solution to this is to blacklist the power-button event device, to prevent evdev from listening to it (the key is handled by pndevmapperd). |
|
330 | OpenPandora Main OS | Core | Bug Report | Low | NetworkManager crashes after suspend to RAM | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Suspend to RAM uses less power than the low power mode, but the NetworkManager crashes often after the Pandora woke up from suspend to RAM.
This could be fixed with an update of NetworkManager. |
|
329 | OpenPandora Main OS | Core | Bug Report | Low | Screen turns on when LCD closed | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Issue: The screen accidentally turns on even when the lid is closed.
How to reproduce: "Screen blanking" must be enabled! Close the lid, wait more than 10 minutes, tap either shoulder button. This behaviour happens whether on charge or battery, at the desktop or running an application, provided that the "screen blanking" option is enabled.
Desired outcome: When the Pandora comes out of "screen blanking", it should restore the brightness to the same value that it was before blanking. |
|
328 | OpenPandora Main OS | Core | Bug Report | Low | XFCE desktop icons not displayed when logging on too qu... | Requires testing | |
Release 1 (Zaxxon) |
Task Description
It looks like XFCE cannot find the icons for links/launchers on the desktop, when the user logs on too quickly. This happens either when the session chooser at start-up is disabled, or when the session is being chosen quickly after the session chooser is being displayed (e.g. by pressing enter as soon as the chooser window pops up). The icons are probably not generated yet at that time point.
A simple workaround is adding the command "xfdesktop --reload" to autostart. Couls this be included in the next SuperZaxxon release or a hotfix? |
|
327 | OpenPandora Main OS | Core | Feature Request | Low | Context menu for the XFCE menu | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Right now. the XFCE menu handles right clicks like left clicks. It would be more logical to either not do anything on a right click, or open a context menu that e.g. lets the user generate a link to an application on the desktop. |
|
326 | OpenPandora Main OS | Core | Bug Report | Low | XFCE menu not expandingl with stylys and scrolling brok... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
The XFCE menu does not always show submenues like "Emulators" when being clicked on with the stylus. It only works if the click lasts long or after all menues have been clicked at once with a long click.
Also, tipping on a scroll arrof of menues that are higher than the screen causes the click to be registered as a "click and hold". This leads to the menu being scrolled all the way to the end. |
|
325 | OpenPandora Main OS | Core | Bug Report | Low | Impossible to not set password at first boot | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
The Wiki states that the Pandora can be used without setting a user password on first boot. But when the password and password confirmation field are left empty, an error pops up saying that there is a password missmatch.
(Please don't fix this bug by just changing the statement in the Wiki ;-) |
|
324 | OpenPandora Main OS | Core | Bug Report | Low | Sticky keys setting for shift key disabling itself afte... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
The sticky keys option is disabling itself for the shift key. It continues to work with the left shoulder button though.
Unfortunately I have no idea what triggers the sticky option to be disabled. Sometimes it happens after 1-2 minutes, sometimes it takes longer.
I would also like to point out that using the shoulder button instead of the shift button it _not_ an option! This issue has been reported in the forums, but apperantly was never fixed. |
|
320 | OpenPandora Main OS | Core | Bug Report | Low | Bluetooth connection lost after wake-up from sleep mode | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
When an internet connection was established through a mobile phone (Android, tethering) via bluetooth, the internet connection will not be re-established when the Pandora was sent to sleep and woken up again. The Pandora seems to be connected to the mobile phone, but no internet connection can be established, not even when manually trying to connect. The only way out is to disable bluetooth and enable it again.
I had similar problems with WiFi, before notaz tweaked the system (http://boards.openpandora.org/index.php/topic/11416-wifi-mysteries-resolved-once-and-for-all-—-power-saving-is-clearly-the-culprit/?p=249036). |
|
318 | Additional Applications | Application | Bug Report | Very Low | strace can not handle conditional SWI's | Unconfirmed | |
All |
Task Description
I found a bug when I tried to debug my code with strace.
It happens when strace has to handle conditional SWI's.
Example: (ASM code) save as "condswi.s"
-----
.data
.text
_globl _start
_start:
mov r0,#0 @ return code
mov r7,#1 @ sys_exit
swine 0
swieq 0
.end
-----
The code assembles/links fine using 'as' and 'ld'.
> as condswi.s
> ld a.out -o condswi
When I want to strace the executable file I got the following error.
> strace ./condswi
'syscall: unknown syscall trap 0x1f000000'
As a result strace quits.
Thanks,
Dennis |
|
315 | OpenPandora Main OS | Core | Bug Report | Medium | Pairing bluetooth SPP devices doesn't work with XFCE | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Hi, sadly the XFCE bluetooth manager seems to have problems with pairing simple SPP devices (an BT GPS mouse here).
1. Enable BT
2. BT Manager -> Add new device
3. Confirm Dialog and wait for scanning
4. Pick device
5. Select PIN options -> "0000" (here for me)
In next step the dialog still asks you to enter a random PIN at your BT device (which is impossible here).
Thus it seems, that the XFCE dialog makes troubles, I tried it with 2 different GPS. Pairing the GPS manually works fine:
sudo rfcomm connect rfcomm0 00:18:E4:26:5F:14 |
|
309 | OpenPandora Development OS | Backend / Core | Feature Request | Medium | Please add xz support in the kernel so squashfs images ... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Please add support for xz compression in the kernel so squashfs tools can compress better the png images. |
|
308 | OpenPandora Main OS | Core | Bug Report | Low | Wireless Network being dropped asks for password | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
When a Wireless Network that is dropped because its signal strength isn't that good gets reconnected to, I am being asked to re-input the password for that network. It would be nice if it just used the password I gave to it when it was able to connect without popping up that dialog box. |
|
307 | OpenPandora Main OS | Core | Feature Request | Medium | Change how Automatic Shutdown works | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
When thee Pandora is shutting down because its almost out of power, it should check to make sure that the nub inputs are set to the default mode (which is mouse movement for the left nub and mouse buttons for the right nub). If not, it should change them to be like that. |
|
301 | OpenPandora Main OS | Core | Bug Report | Medium | Missing X keybinding for colon symbol | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
As verified with xev, an attached bluetooth keyboard can not generate colon (shift semicolon). xmodmap shows that (unlike a standard Linux system) shift-semicolon is mapped to NoSymbol. While it's find that there's a special symbol to get semicolon on the built-in keyboard, the other binding really should be there in support of attached keyboards. |
|
300 | OpenPandora Main OS | Core | Bug Report | Low | SuperZaxxon interprets on-disk FAT32 filenames differen... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
With SuperZaxxon Final, I've noticed that stuff running on the Pandora like Thunar and bash are seeing a different interpretation of filenames on disk than when I remove the SD card and insert it into my desktop PC.
Specifically, the following two mismatches appear to be present when using a FAT32-formatted SD card:
First, the Pandora's VFAT support seems to be be operating with different case-handling settings than desktop Linux distros.
Filenames set in all uppercase are forced to all-lowercase on the Pandora (whether they're set on the desktop or the Pandora) but inserting the card into a PC reveals that the. All-lowercase filenames set by software on the Pandora risk appearing in all uppercase when the card is inserted into a PC. (I think the grsync PND is what created the files in question)
Among other things, this forces me to use EITHER the PND-based copy of grsync over the network OR a desktop-based copy of rsync with an SD card reader but not both because the kernel will preserve case differences like ALBION.BAT vs. albion.bat but rsync think they are separate files. (resulting in Flash-killing, time-wasting deletion and re-creation)
It also makes for irritating entries like "zzt" in DOSBox or "ddr" in PyDance where I can't capitalize the filename properly without employing Department of Redundancy Department with "DDR Songs" or "ZZT.The.Game" as an excuse for mixed case.
Second, SuperZaxxon Final seems to be using a different (though still Unicode-capable) filename encoding than all the desktop distros I've tried.
Filenames are preserved properly and all-ASCII filenames are displayed properly in all cases, but any non-ASCII characters appear as gibberish on whichever system was not used to set them.
I've confirmed this problem with these two filenames:
- 03 - The Foggy Dew with Sinéad O'Connor.flac
- Lucky Star - Native Misao (Touhou - Native Faith) ???????????????????×??????.mp4
As a Canadian user, my desktops use the "en_CA.utf8" locale and the only other distros I've found which have this problem are Slax and the 1.0 release of its successor, Porteus, both of which use ISO-8859-1 (latin1) for filenames. |
|
299 | OpenPandora Main OS | Core | Bug Report | Low | run_pnd.sh does not follow PXML.xml or "-d"-Parameter | Assigned | |
Release 1 (Zaxxon) |
Task Description
I call pnd_run.sh with a pnd. The application directory will invariably be /media/SD/pandora/appdata/, no matter if the PXML.xml specifies a different appdata path. Also, the parameter -d for run_pnd.sh is not followed, either.
I tried with vlc.pnd from the app store and with Dosbox74.pnd.
UPDATE: Original submission contained a wrong filename reference. Corrected that typo to the filename intended by the submitter. Admin: porg. |
|
297 | OpenPandora Main OS | Core | Bug Report | Low | pandora button and taskbar autohide | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
When the taskbar is set to autohide, the Pandora button does not bring up the menu anymore. |
|
296 | OpenPandora Development OS | Backend / Core | Bug Report | Low | upowerd fails to open file /proc/timer_stats | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Hi,
Upowerd spams each 10 seconds with warning "failed to open file '/proc/timer_stats'".
According to https://bugzilla.redhat.com/show_bug.cgi?id=826191 this feature can be activated in kernel. I'm not sure if upowerd can be told not to check this feature, I haven't been able to find an specific option for that so far. Activating this option in kernel, this warning should be eliminated.
It would help give upowerd data it needs, and also it will stop filling up the log, which then I guess interferes with power saving (active file access while writing into log...). |
|
295 | Additional Applications | Application | Bug Report | Low | Making the pnd file executable | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Hi there,
it would be neat if an rc script containing this could be added to the os (and run on startup) :
if [ ! -e /proc/sys/fs/binfmt_misc/register ];then
modprobe binfmt_misc
mount -t binfmt_misc none /proc/sys/fs/binfmt_misc
fi
echo ":squashPND:M::hsqs::/usr/bin/pnd_run:">/proc/sys/fs/binfmt_misc/register
That render all the SquashFS executable directy by clicking them on the icon. Sadly there is no way to pass the arguments to the apps (as pnd_run dont support that).
A similar line could be added to support iso pnd. |
|
293 | OpenPandora Development OS | Backend / Core | Feature Request | Medium | migration to systemd: populate-volatile.sh | Unconfirmed | |
Release 2 (.next) |
Task Description
populating volatile requires execution of initialization script, which I had to minimally modify for it to start working. I am placing that file to /usr/pandora/init/ folder.
Any suggestions for better place for custom init scripts? :)
This script fixes utmp (and pndnotifyd) problem for systemd image
Noticed problems (TODO):
boot sequence recreates cache, run and tmp dirs before populate-volatile inits them. One of the solutions would be to deploy system with symlinks already in place (pointing to /var/volatile subdirs)
-------------
Deployment:
delete:
/etc/init.d/populate-volatile.sh
/etc/rcS.d/S37populate-volatile.sh
/var/{cache,lock,log,run,tmp}
add:
/etc/systemd/system/populate-volatile.service
/usr/pandora/init/populate-volatile.sh
symlink:
/etc/systemd/system/basic.target.wants/populate-volatile.service to /etc/systemd/system/populate-volatile.service
URLs for files:
http://dl.dropbox.com/u/18781412/next/populate-volatile.service
http://dl.dropbox.com/u/18781412/next/populate-volatile.sh |
|
292 | OpenPandora Main OS | Core | Bug Report | Low | Can't seek in ogg files using pygame / SDL | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Using pygame I try to play a music file starting from some position in the middle::
import pygame
pygame.init()
pygame.mixer.init()
pygame.mixer.music.load('some_file.ogg')
pygame.mixer.music.play(0,60)
This should start playing the file from the firs minute, instead on the pandora the file plays from the start.
I've tried the same code in a debian (sid) chroot (from extend utils) and it works correctly, as it does on my pc (debian wheezy).
I suspect that the issue may be present also in .next (I've done a very quick test on a friend's pandora).
Some relevant version numbers:
* libogg.so.0.6.0 (on debian libogg.so.0.8.0)
* libSDL_mixer-1.2.so.0.10.1 (on debian libSDL_mixer-1.2.so.0.12.0) |
|
291 | OpenPandora Main OS | Core | Bug Report | Medium | root-owned pndrun_...out file makes PND refuse starting | Assigned | |
Release 1 (Zaxxon) |
Task Description
If a PND has been run as root before (using pnd_run.sh from a root shell) and afterwards it is invoked the normal way, the PND doesn't start, because the .out file cannt be overwritten:
/usr/pandora/scripts/pnd_run.sh: line 26: /tmp/pndrun_firefox.out: Permission denied
Desired solution:
.out file is silently overwitten.
Maybe, if that's not possible, create another .out file with a different name (added counter, for example).
Seen in SuperZaxxon relese 1.5, not in Beta3 as this task is flagged, but there is no choice besides Beta3. |
|
290 | OpenPandora Main OS | Core | Bug Report | Medium | gnome-mount not available | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
In GTK applications, such as Truecrypt, NoteCase Pro or Mousepad, the file open / file save dialogs have shortcuts to mounted file systems on the left side.
If clicking such a shortcut entry, the corresponding file system's contents are shown in the right dialog pane.
This works for file systems, which were available at boot time.
For file systems mounted after booting, e.g. by inserting an SD card or connecting a USB drive, when clicking such an entry, an error message appears saying
"Could not mount [volumen name]
Failed to execute child process 'gnome-mount' (No such file or directory)"
This is healed by
sudo opkg install gnome-mount
(which instals gnome-mount, nautilus, gvfsd-ftp, gvfs (upgrade), and a lot of libs (upgrades)..
This has been seen in SuperZaxxon release 1.5, not in Beta3 (but Beta3 is the only choice in Flyspray's dropdown currently).
I reported that error for HF6 I think, and it seemed to be fixed in SuperZaxxon Beta5. A regression? |
|
288 | OpenPandora Main OS | Core | Feature Request | Low | add functionality to inputrc | Unconfirmed | |
All |
Task Description
Since the default inputrc doesn't contain any functionality (simple cli movements like ctrl-left or crtrl-right to skip words don't work) this diff may be useful to add to the cli-experience. I've also been trying to get the delete-key to work, but this is apparently already a known issue (see FS#227). I can remove this from the diff if you want. (I couldn't attach a file to the task somehow)
31,32c31,33
< # "\e[3~": delete-char
< # "\e[2~": quoted-insert
---
> #"\e[3~": delete-char
> "\e[^?": delete-char
> "\e[2~": quoted-insert
44,47c45,50
< # "\e[5C": forward-word
< # "\e[5D": backward-word
< # "\e\e[C": forward-word
< # "\e\e[D": backward-word
---
> "\e[1;5C": forward-word
> "\e[1;5D": backward-word
> "\e[5C": forward-word
> "\e[5D": backward-word
> "\e\e[C": forward-word
> "\e\e[D": backward-word |
|
274 | OpenPandora Development OS | Backend / Core | Bug Report | Medium | Patch for TI SGX 4.04.00.03 drivers to compile against ... | Unconfirmed | |
AllRelease 2 (Yars Revenge) |
Task Description
This patch when applied aginst TI 4.04.00.03 SGX drivers will allow building the pvr kernel modules.
This relies on task 272 (kernel patch) and should be used inconjuction with task 273
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_displayclass.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_displayclass.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_displayclass.c 2011-06-20 21:03:33.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_displayclass.c 2012-02-09 08:37:21.000000000 +1100
@@ -830,7 +830,11 @@
unsigned long ulLCM;
unsigned uiFBDevID = psDevInfo->uiFBDevID;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_lock();
+#else
acquire_console_sem();
+#endif
psLINFBInfo = registered_fb[uiFBDevID];
if (psLINFBInfo == NULL)
@@ -972,7 +976,11 @@
ErrorModPut:
module_put(psLINFBOwner);
ErrorRelSem:
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_unlock();
+#else
release_console_sem();
+#endif
return eError;
}
@@ -982,7 +990,11 @@
struct fb_info *psLINFBInfo = psDevInfo->psLINFBInfo;
struct module *psLINFBOwner;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_lock();
+#else
acquire_console_sem();
+#endif
psLINFBOwner = psLINFBInfo->fbops->owner;
@@ -993,7 +1005,11 @@
module_put(psLINFBOwner);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_unlock();
+#else
release_console_sem();
+#endif
}
static OMAPLFB_DEVINFO *OMAPLFBInitDev(unsigned uiFBDevID)
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_linux.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_linux.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_linux.c 2011-06-20 21:03:33.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_linux.c 2012-02-09 13:14:28.000000000 +1100
@@ -24,11 +24,14 @@
*
******************************************************************************/
+
+#include
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
+#endif
-#include
#include
@@ -236,8 +239,11 @@
struct fb_var_screeninfo sFBVar;
int res;
unsigned long ulYResVirtual;
-
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_lock();
+#else
acquire_console_sem();
+#endif
sFBVar = psDevInfo->psLINFBInfo->var;
@@ -268,31 +274,37 @@
printk(KERN_INFO DRIVER_PREFIX ": %s: Device %u: fb_pan_display failed (Y Offset: %lu, Error: %d)\n", __FUNCTION__, psDevInfo->uiFBDevID, psBuffer->ulYOffset, res);
}
}
-
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_unlock();
+#else
release_console_sem();
+#endif
}
OMAPLFB_UPDATE_MODE OMAPLFBGetUpdateMode(OMAPLFB_DEVINFO *psDevInfo)
{
struct omap_dss_device *psDSSDev = fb2display(psDevInfo->psLINFBInfo);
OMAP_DSS_DRIVER(psDSSDrv, psDSSDev);
-
- enum omap_dss_update_mode eMode;
-
- if (psDSSDrv == NULL || psDSSDrv->get_update_mode == NULL)
- {
- DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Can't get update mode\n", __FUNCTION__, psDevInfo->uiFBDevID));
- return OMAPLFB_UPDATE_MODE_UNDEFINED;
+ if (psDSSDrv == NULL || psDSSDev == NULL)
+ {
+ DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: No DSS device\n", __FUNCTION__, psDevInfo->uiFBDevID));
+ }
+ enum omapfb_update_mode eMode;
+
+ if (!omapfb_get_update_mode(psDevInfo->psLINFBInfo, &eMode))
+ {
+// DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Can't get update mode\n", __FUNCTION__, psDevInfo->uiFBDevID));
+ return OMAPLFB_UPDATE_MODE_AUTO;
+// return OMAPLFB_UPDATE_MODE_UNDEFINED;
}
- eMode = psDSSDrv->get_update_mode(psDSSDev);
switch(eMode)
{
- case OMAP_DSS_UPDATE_AUTO:
+ case OMAPFB_AUTO_UPDATE:
return OMAPLFB_UPDATE_MODE_AUTO;
- case OMAP_DSS_UPDATE_MANUAL:
+ case OMAPFB_MANUAL_UPDATE:
return OMAPLFB_UPDATE_MODE_MANUAL;
- case OMAP_DSS_UPDATE_DISABLED:
+ case OMAPFB_UPDATE_DISABLED:
return OMAPLFB_UPDATE_MODE_DISABLED;
default:
DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Unknown update mode (%d)\n", __FUNCTION__, psDevInfo->uiFBDevID, eMode));
@@ -307,10 +319,10 @@
{
struct omap_dss_device *psDSSDev = fb2display(psDevInfo->psLINFBInfo);
OMAP_DSS_DRIVER(psDSSDrv, psDSSDev);
- enum omap_dss_update_mode eDSSMode;
+ enum omapfb_update_mode eDSSMode;
int res;
- if (psDSSDrv == NULL || psDSSDrv->set_update_mode == NULL)
+ if (psDSSDrv == NULL)
{
DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Can't set update mode\n", __FUNCTION__, psDevInfo->uiFBDevID));
return OMAPLFB_FALSE;
@@ -319,20 +331,20 @@
switch(eMode)
{
case OMAPLFB_UPDATE_MODE_AUTO:
- eDSSMode = OMAP_DSS_UPDATE_AUTO;
+ eDSSMode = OMAPFB_AUTO_UPDATE;
break;
case OMAPLFB_UPDATE_MODE_MANUAL:
- eDSSMode = OMAP_DSS_UPDATE_MANUAL;
+ eDSSMode = OMAPFB_MANUAL_UPDATE;
break;
case OMAPLFB_UPDATE_MODE_DISABLED:
- eDSSMode = OMAP_DSS_UPDATE_DISABLED;
+ eDSSMode = OMAPFB_UPDATE_DISABLED;
break;
default:
DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Unknown update mode (%d)\n", __FUNCTION__, psDevInfo->uiFBDevID, eMode));
return OMAPLFB_FALSE;
}
- res = psDSSDrv->set_update_mode(psDSSDev, eDSSMode);
+ res = omapfb_set_update_mode(psDevInfo->psLINFBInfo, eDSSMode);
if (res != 0)
{
DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: set_update_mode failed (%d)\n", __FUNCTION__, psDevInfo->uiFBDevID, res));
@@ -441,10 +453,17 @@
OMAPLFB_ERROR OMAPLFBUnblankDisplay(OMAPLFB_DEVINFO *psDevInfo)
{
int res;
-
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_lock();
+#else
acquire_console_sem();
+#endif
res = fb_blank(psDevInfo->psLINFBInfo, 0);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_unlock();
+#else
release_console_sem();
+#endif
if (res != 0 && res != -EINVAL)
{
printk(KERN_WARNING DRIVER_PREFIX
@@ -459,9 +478,17 @@
static void OMAPLFBBlankDisplay(OMAPLFB_DEVINFO *psDevInfo)
{
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_lock();
+#else
acquire_console_sem();
+#endif
fb_blank(psDevInfo->psLINFBInfo, 1);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_unlock();
+#else
release_console_sem();
+#endif
}
static void OMAPLFBEarlySuspendHandler(struct early_suspend *h)
@@ -692,9 +719,17 @@
flush_workqueue(psDevInfo->psSwapChain->psWorkQueue);
}
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_lock();
+#else
acquire_console_sem();
+#endif
ret = fb_blank(psDevInfo->psLINFBInfo, iFBMode);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+ console_unlock();
+#else
release_console_sem();
+#endif
OMAPLFBCreateSwapChainUnLock(psDevInfo);
@@ -717,7 +752,6 @@
static int __init OMAPLFB_Init(void)
#endif
{
-
if(OMAPLFBInit() != OMAPLFB_OK)
{
printk(KERN_WARNING DRIVER_PREFIX ": %s: OMAPLFBInit failed\n", __FUNCTION__);
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/common/resman.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/common/resman.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/common/resman.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/common/resman.c 2012-02-09 23:33:43.000000000 +1100
@@ -24,15 +24,17 @@
*
******************************************************************************/
+#include
#include "services_headers.h"
#include "resman.h"
#ifdef __linux__
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
+#endif
-#include
#include
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,9)
#include
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/event.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/event.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/event.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/event.c 2012-02-09 09:00:12.000000000 +1100
@@ -24,11 +24,14 @@
*
******************************************************************************/
+#include
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
+#endif
-#include
#include
#include
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22))
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mmap.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mmap.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mmap.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mmap.c 2012-02-09 08:56:41.000000000 +1100
@@ -24,11 +24,14 @@
*
******************************************************************************/
+#include
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
+#endif
-#include
#include
#include
#include
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.c 2012-02-09 08:52:48.000000000 +1100
@@ -24,11 +24,14 @@
*
******************************************************************************/
+#include
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
+#endif
-#include
#include
#include
#include
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.h b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.h
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.h 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.h 2012-02-09 08:55:49.000000000 +1100
@@ -27,11 +27,14 @@
#ifndef __IMG_LINUX_MM_H__
#define __IMG_LINUX_MM_H__
+#include
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
+#endif
-#include
#include
#include
#include
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/module.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/module.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/module.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/module.c 2012-02-09 08:59:05.000000000 +1100
@@ -24,9 +24,13 @@
*
******************************************************************************/
+#include
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
+#endif
#if !defined(SUPPORT_DRI_DRM)
@@ -44,7 +48,6 @@
#include
#include
#include
-#include
#include
#include
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.c 2012-02-10 00:24:09.000000000 +1100
@@ -24,10 +24,13 @@
*
******************************************************************************/
+#include
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
-#include
+#endif
#include
#include
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h 2012-02-09 08:54:31.000000000 +1100
@@ -27,11 +27,13 @@
#ifndef __IMG_LINUX_MUTILS_H__
#define __IMG_LINUX_MUTILS_H__
+#include
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
-
-#include
+#endif
#if !(defined(__i386__) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)))
#if defined(SUPPORT_LINUX_X86_PAT)
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/osfunc.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/osfunc.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/osfunc.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/osfunc.c 2012-02-09 09:01:16.000000000 +1100
@@ -24,11 +24,14 @@
*
******************************************************************************/
+#include
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
+#endif
-#include
#include
#include
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22))
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/proc.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/proc.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/proc.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/proc.c 2012-02-09 08:57:49.000000000 +1100
@@ -24,13 +24,16 @@
*
******************************************************************************/
+#include
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
+#endif
#include
#include
-#include
#include
#include
#include
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_debug.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_debug.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_debug.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_debug.c 2012-02-09 23:54:38.000000000 +1100
@@ -24,9 +24,12 @@
*
******************************************************************************/
+#include
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
+#endif
#include
#include
@@ -72,7 +75,7 @@
static PVRSRV_LINUX_MUTEX gsDebugMutexNonIRQ;
-static spinlock_t gsDebugLockIRQ = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(gsDebugLockIRQ);
#if !defined (USE_SPIN_LOCK)
#define USE_SPIN_LOCK (in_interrupt() || !preemptible())
diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_drm.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_drm.c
--- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_drm.c 2011-06-20 21:03:34.000000000 +1000
+++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_drm.c 2012-02-16 01:58:14.000000000 +1100
@@ -26,14 +26,16 @@
#if defined(SUPPORT_DRI_DRM)
+#include
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
#ifndef AUTOCONF_INCLUDED
#include
#endif
+#endif
#include
#include
#include
-#include
#include
#include
#include
@@ -371,11 +373,23 @@
.poll = drm_poll,
.fasync = drm_fasync,
},
+#if (LINUX_VERSION_CODE name = PVR_DRM_NAME,
+// .pci->id_table = asPciIdList,
+// },
+#endif
.name = PVR_DRM_NAME,
.desc = PVR_DRM_DESC,
@@ -385,6 +399,13 @@
.patchlevel = PVRVERSION_BUILD,
};
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39))
+static struct pci_driver pci_pvr_driver = {
+ .name = PVR_DRM_NAME,
+ .id_table = asPciIdList,
+};
+#endif
+
static int __init PVRSRVDrmInit(void)
{
int iRes;
@@ -401,7 +422,11 @@
}
#endif
+#if (LINUX_VERSION_CODE |
|
273 | OpenPandora Development OS | Backend / Core | Bug Report | Medium | TI SGX driver package selection | Unconfirmed | |
AllRelease 2 (Yars Revenge) |
Task Description
The last release of TI Graphics SDK Product to support the 1.0.3 SGX core is 4.04.00.03
The overlay needs to peg the package selection to this version. |
|
272 | OpenPandora Development OS | Backend / Core | Bug Report | Medium | kernel 3.2.1 DSS export omapfb update mode functions | Unconfirmed | |
AllRelease 2 (Yars Revenge) |
Task Description
The update mode functions have moved from the DSS layer to omapfb implementaion.
This patch exports the new function symbols for use by the TI drivers.
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -22,6 +22,7 @@
#include
#include
+#include
#include
#include
#include
@@ -359,6 +360,7 @@ int omapfb_set_update_mode(struct fb_info *fbi,
return r;
}
+EXPORT_SYMBOL(omapfb_set_update_mode);
int omapfb_get_update_mode(struct fb_info *fbi,
enum omapfb_update_mode *mode)
@@ -381,6 +383,7 @@ int omapfb_get_update_mode(struct fb_info *fbi,
return 0;
}
+EXPORT_SYMBOL(omapfb_get_update_mode);
/* XXX this color key handling is a hack... */
static struct omapfb_color_key omapfb_color_keys[2]; |
|
270 | OpenPandora Main OS | Core | Bug Report | Very Low | Power-slider & lid-close events: XFCE observes user set... | New | |
Release 1 (Zaxxon) |
Task Description
STATUS QUO:
If you are in XFCE and hold the power slider for 3 seconds, you thereby trigger the shutdown command.
For 3 more seconds a dialogue box gives you the chance to abort the shutdown ("Shutting down in 3…2…").
Now in MiniMenu no direct shutdown key is available. You first have to quit the running app (via PANDORA key), then call up the menu (via SELECT key), and then navigate to "Shutdown" and confirm it (by B or ENTER).
INQUIRED BEHAVIOR:
1) Thanks to the very recent MiniMenu speedups, these 4 consecutive user interaction steps can now at least be be executed a lot faster.
Nevertheless, offering a 1-button-interaction (via power slider) too, would be nice. Could you please make that available to MiniMenu?
And in general: Make this power-slide-event available to any possible GUI, so that not each GUI has to implement this by itself, but rather the OS catches this event and handles it uniformly, except if a certain GUI WANTS to establish an exception to the rule.
2) Also the "Lid-Close-Settings" seem to be ignored by MiniMenu. MiniMenu seems to have the action "Turn off screen" hardcoded to that event. Please make MiniMenu observe the user settings from "Lid-Close-Settings".
RELATED SOURCE CODE FILES (to my knowledge):
op_lid.sh
op_power.sh
op_bright_up.sh
op_bright_down.sh |
|
269 | OpenPandora Main OS | Core | Bug Report | Low | Thunar Slow Exit | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Thunar takes a long time going back to minimenu on exit. You don't notice this when in XFCE but then you are always in the GUI not returning to it.
This started in Hotfix 6 Alpha4 I believe |
|
265 | OpenPandora Main OS | Application | Bug Report | Medium | MiniMenu: Flawed tab display of sub-categories if they ... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
I assigned personal subcategories to some of my games.
Some of those subcategories share the same beginning string, i.e: Shooter, ShooterBallistic ShooterScoller.
MiniMenu displays those subcategories with flaws! See the ASCII screenshots below.
Note: The star symbols indicate the currently active selection.
The main category tab "Game" being active:
----------------------------------------------------------
| All | Audio | AudioVideo | Education |*Game*| Graphics |
----------------------------------------------------------
ActionGame AdventureGame ArcadeGame BlocksGame ...
Shooter ShooterBallistic ShooterScroller ...
GameA GameB GameC ...
----------------------------------------------------------
Now if I navigate into the sub-category "Shooter", everything normal:
----------------------------------------------------------
|*Shooter*|
----------------------------------------------------------
.. ShooterA ShooterB ShooterC ...
----------------------------------------------------------
But if I navigate to the sub-category "ShooterBallistic", strangely MiniMenu shows 2 tabs, "Shooter" and "ShooterBallistic", and jumps right into "Shooter".
----------------------------------------------------------
|*Shooter*| ShooterBallistic |
----------------------------------------------------------
.. ShooterA ShooterB ShooterC ...
----------------------------------------------------------
In order to reach my intended tab "ShooterBallistic" I need to navigate to it again. Annoying. There the contents are as expected:
----------------------------------------------------------
| Shooter |*ShooterBallistic*|
----------------------------------------------------------
.. ShooterBallisticA ShooterBallisticB ShooterBallisticC
----------------------------------------------------------
The flaw is the same for all other sub-categories beginning with "Shooter...". All have the flaw as shown in the example "ShooterBallistic", only that it is themselves instead of "ShooterBallistic". One more example to be perfectly clear:
----------------------------------------------------------
| Shooter |*ShooterScroller*|
----------------------------------------------------------
.. ShooterScrollerA ShooterScrollerB ShooterScrollerC
---------------------------------------------------------- |
|
262 | OpenPandora Main OS | Application | Bug Report | Medium | MiniMenu: 1) "Notes line" cannot be deleted. 2) Note li... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Steps to reproduce the bug(s):
1) In MiniMenu select an arbitrary app.
2) Press SPACE to bring up the contextual menu.
3) Select "Edit notes line 1".
4) Insert your string and confirm.
5) Now at a later time you may decide to remove your note line again. Therefore you select the same app again in MiniMenu, then repeat steps 2-3, but this time:
a) Erase all characters so that you get an empty string and then confirm. RESULT: Your change is simply ignored! There should be a possibility within MiniMenu to remove/reset note lines, the simplest being to simply accept an empty string as an input, that's what an average user will try if s/he does not find a dedicated "Delete note line" command.
b) As a workaround I tried something and detected yet another bug! As I could not create an empty string, I simply created a note line only containing 1 SPACE character (=the string " ") and confirmed. This got accepted.
If MiniMenu is in detailed view mode (press the A-button or TAB in order to bring it up, if it is not already there) and you slide over an app whose note line is " ", MiniMenu crashes!
Maybe the bug is connected with the writing to / the parsing from the .OVR (override) files which MiniMenu creates for the affected files, as the separating value in OVR files seems to be TAB, and SPACE is also WHITESPACE, therefore some parsers probably skip/misinterpret this, and MiniMenu then catches an unexpected situation!
WORKAROUND: If you ran into the problem, that you cannot get rid of the note lines anymore, simply start a file browser of your choice, navigate to the location of the affected .PND file and find its sister .OVR (override) file and delete it or edit it accordingly! |
|
261 | OpenPandora Main OS | Core | To Do (Reminder) | High | Overview of all current KEYBOARD INPUT related issues | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Built-in keyboard input is a central thing on the Pandora, as it concerns almost all user interfaced apps!
I realized that I myself and also others submitted quite many reports concerning this issue.
Hence this meta issue is intended as an overview/accumulation/aid for those devs who are willing to overwork the whole issue.
If you realize new related issues, feel free to add them here.
If this my effort is contradicting the OpenPandora workflow, then pardon me, and instruct me, how else to handle issues of that kind. Thanks!
Keyboard low level: Driver, keyboard layout, post processing (hotkeys, input support, etc)
FS#138 FS#227 FS#242 FS#259
Keyboard mid level: Application interfacing
FS#102 FS#123 FS#238
Keyboard application internal level
FS#157 (dupe: FS#249 ) FS#243 FS#256 |
|
260 | OpenPandora Main OS | Core | Bug Report | Medium | Low Power Mode: Input (keyboard, nub) still taken. Appl... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
This is the related documentation:
http://pandorawiki.org/Power_modes#Low_Power
(Please update accordingly as part of the issue resolution)
FROM MY USER EXPERIENCE:
If you put the Pandora into Low Power Mode, then press some keys, and then wake the Pandora back into Normal Mode, your input (both keys and nubs, haven't tried with USB input yet) seem to have triggered something while the device was in Low Power Mode!
What does really happen in Low Power Mode concerning execution and input?
a) Input is received AND triggers as application execution continues
or
b) Kernel/driver queues the input signals into a buffer, and executes them on wake?
If supposition a) or b) is true, then this would be one more reason to properly implement: FS#259
OBSERVANCE EXAMPLE 1:
1) Start MiniMenu. Mentally note down your active tab.
2) Put Pandora to Low Power Mode.
3) Press shoulder button R once.
4) Wake Pandora to Normal Mode. You are now one tab to the right of where you left. Input must have been caught in Low Power Mode, but wether execution of it happened while Low Power Mode or later after wake in Normal power Mode is unclear.
OBSERVANCE EXAMPLE 2:
1) Start gedit (a text editor). Insert the digit "1".
2) Put Pandora to Low Power Mode.
3) Press: CTRL-N 2 CTRL-N 3 CTRL-N 4. (Without the spaces)
4) Wake Pandora to Normal Mode.
5) For a fraction of a second you see the tabs building up. Either the input was really received AND executed while Low Power Mode and what you see is just a delayed window manager refreshment, or the input was queued in Low Power Mode, and only executed on wake. |
|
258 | OpenPandora Main OS | Application | Bug Report | Low | MiniMenu: Pressing key multiple times only cycles focus... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
EXAMPLE: MiniMenu with the option "Subcategories as folders" YES, and the current active tab i.e. "Game" lists:
Subgenre folders: ActionGame, AdventureGame, ArcadeGame, BlocksGame, …
App items: Abuse, Amoeboax, Arkaniod, Bloqus, …
THE BUG: Pressing "A" multiple times only cycles the focus between folders (ActionGame, AdventureGame, ArcadeGame), but never reaches the app items (Abuse, Amoeboax, Arkaniod).
BESIDES THIS BUG in the current keyboard item selection logic, I kindly inquire to implement: FS#243 |
|
257 | OpenPandora Main OS | Core | Bug Report | Medium | TV Out script breaks XV/SDL Video playback | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
This seems to be the case with Hot-fix 5 and 6 alpha 4.
I've been able to repeat this bug by re-flashing..
On a fresh re-flash.. installed community codec pack.. Videos will play fine on Panplayer, VLC and Gnome-Mplayer with default settings, which I believe is XV or SDL out in the case of VLC.
Run the TV-out script it will cause a blank black screen during playback.. Disabling TV-out, switching modes, rebooting.. battery out, nothing seems to allows it to work with XV/SDL out again.. I know If I switch to X11 it will make it "work" again, but I notice a bit of lag during playback using X11 compared to XV/SDL out. |
|
256 | Additional Applications | Application | Feature Request | Medium | Closed lid apps (i.e. audio recording/playback) should ... | Unconfirmed | |
All |
Task Description
When the lid is closed the only remaining buttons on the Pandora are the L + R shoulder buttons and the power slider.
Applications operating in this mode should utilize that few available buttons!
Example for button utilization in a audio playback software:
L + R at once: Toggle Play/Pause
L hold: fast backward
R hold: fast forward
L click: jump to previous song
R click: jump to next song
L double click: jump to previous album/artist
R double click: jump to next album/artist |
|
253 | OpenPandora Main OS | Application | Feature Request | Medium | Switch GUI: Intelligent automatic choice | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
If only 2 GUIs are available, skip the user selection and switch right into the only other GUI. What else would the user want?! Right!
If more than 2, already set the focus in the GUI list to the next possible item. |
|
252 | OpenPandora Main OS | Core | Feature Request | Low | Power management: If power cable is plugged ignore "Shu... | New | |
Release 1 (Zaxxon) |
Task Description
If the power cable is plugged and the user chooses "Shutdown Pandora" from a menu, there should be a warning that this is without purpose, as the device will automatically restart.
The resulting user choices should be "Cancel shutdown" and "Shutdown nevertheless". |
|
251 | OpenPandora Main OS | Core | Feature Request | Low | SD Mass Storage: Possibility to host multiple volumes | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
a) Host multiple volumes at once.
b) Select one for hosting first, later host additional ones. (I guess this scenario is more complicated) |
|
246 | OpenPandora Main OS | Application | Bug Report | Medium | Clipboard content of closed app gets tossed instead of ... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
FLAWED BEHAVIOUR:
Copy and paste only works between 2 active applications. This is very limiting!
If you are in the single task oriented MiniMenu you have no chance at all to share the clipboard between apps!
If you are in the multi tasking oriented XFCE desktop environment you can only share between apps running in parallel! Not with apps which started after the source app has been terminated.
DESIRED BEHAVIOUR:
The clipboard content (within reasonable limits of course) should remain, regardless of the source application, so that you can paste at any later moment into any application. |
|
244 | OpenPandora Main OS | Application | Feature Request | Low | Include man and the manpages | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
The command line environment of the default OS does not include the command "man" and the respective manpages of the installed programs.
I personally often use manpages, as I hardly remember the syntax/arguments of all programs I use.
Having them would be very convenient!
EVALUATING NEEDED STORAGE AMOUNT
Some may argue that storage space is quite limited on the NAND.
Yes I agree. Hence the number of included programs is limited too. Hence it would not be all too many manpages.
When I press TAB into an empty Terminal prompt, I get 1406 possibilities, which is about the amount of available commands/programs if we ignore aliases, etc.
Multiply that with an average of 20 kb per manpage, and you get about 30 MB in total. With compression this could possibly be brought down to 15-20 MB.
POSSIBLE SOLUTIONS
A) Store into the NAND the manpages of core OS CLI programs only, and not all the library/system/etc documentation.
B) Include only the man command into the core OS, and compile/configure it in such a fashion, that it finds the manpages within non-NAND media (SD card, USB volume, etc).
b1) Specify that it simply looks into a certain path within the /media/*/pandora/ structure.
b2) Or offer PND packages like man-core.pnd, man-extended.pnd,... you get the idea or even man-custom.pnd (which would look into its appdata or a certain path for custom added manpages, to somehow get the b1 approach within the PND approach). |
|
243 | OpenPandora Main OS | Application | Feature Request | Medium | MiniMenu: Pressing successive character keys should com... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
Imagine this tab content:
Nubs, Pandora Input, PNDstore.
CURRENT BEHAVIOR:
Pressing "P" and "N" is succession jumps to "Nubs" eventually, as it first jumps to the first "P" item ("Pandora Input"), then to the first "N" item, "Nubs".
DESIRED BEHAVIOR:
That it acts like in most Linux file browsers or the Mac OS X Finder.
In detail: Pressing "P" and "N" within a certain time limit should combine them to the string "PN" and jump to the first item which starts with that string, i.e. "PNDStore". If no item matches, reduce the combination string by one character, try to match again, if that doesn't match, try matching again with one character less, ... , until only one character is left, and if that one doesn't match jump to the nearest previous lexicographical character, which matches. |
|
242 | OpenPandora Main OS | Application | Feature Request | Medium | Pressing SHIFT + any key in sequence creates the modifi... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
ISSUE ENVIRONMENT:
If you hold your Pandora in your hands, you only have your thumbs for typing, hence your typing abilities are quite limited.
It is hard to press more than 2 keys, and hard to press 2 keys on the same side, as your second thumb does not reach the opposite side all too easy (except you have a basketball player's hands).
The modifier keys Start/ALT Select/CTRL Pandora/(META, I guess?) are in the middle of the keyboard, hence the can easily pressed together with another key. But SHIFT lies at an ergonomically problematic side (left boundary). Hence hard to press with other left side keys.
SUGGESTED SOLUTION:
I suggest that Pandora OS offers an optional and configurable input help.
[1|2|3 presses | hold for duration x] SHIFT [timeout y] [modifier key 2] [timeout z] key
Produces the same result like SHIFT + modkey2 + key
Very likely modifier key 2 and timeout z are not necessary, as you can trigger the SHIFT hold (by your defined action), and then press the modifier key 2 and the other key at once, as the other modifier keys are laid at a central (ergonomically better) position. |
|
240 | OpenPandora Main OS | Application | Feature Request | Low | MiniMenu shall return into full screen mode (more quick... | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
If you set MiniMenu's option "Live (not exit) on app run?" to YES, and you quit an application and return to the still running MiniMenu, it runs in windowed mode, and takes about 2 seconds until it goes into full screen mode again.
This delay should at best be not noticeable at all, at most 0-1 seconds. |
|
239 | OpenPandora Main OS | Application | Feature Request | Low | MiniMenu: New option: Grid stop horizontal | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
I am suggesting the new option "Grid stop horizontal" for MiniMenu with the following possible settings and their effect.
Yes -> If the boundary is reached the focus remains there.
No -> If the boundary is reached the focus starts at the opposite side again.
Jump to next/prev line -> If the boundary is reached the focus jumps to the next/previous line and the opposite side. |
|
238 | OpenPandora Main OS | Application | Feature Request | Low | Quick key access to OK in dialogues | Unconfirmed | |
Release 1 (Zaxxon) |
Task Description
PROBLEM DESCRIPTION: In many GUI dialogues the default action button (OK, ACCEPT, YES, …) cannot be triggered with a simple key press. Pressing ENTER triggers the element which has focus (usually the first dialogue element), but not the default action, as most computer users would expect!
MY WORKAROUND MEANWHILE: Press ALT plus the underlined letter of your desired action. But that's not very convenient as the underlined letter needs to be looked upon first, as the button label can differ from situation to situation (ACCEPT, OK, YES, …) and then 2 keys need to be pressed.
SUGGESTED SOLUTION: The custom of many operating systems should be adapted on the OpenPandora as well. SPACE triggers the currently focused element (whatever that may be: list item, radio button, checkbox, etc), and ENTER triggers the default action of that dialogue.
Or even better use the Pandora specific A/B/Y/X keys cleverly in those dialogues/selections. I don't know whether there is a standard functionality assignment within this key-group, in MiniMenu "B" is start/confirm, I do not know of any other standard assignments yet. |