All Projects

IDProjectCategory  ascTask TypeSeveritySummaryStatusProgressOperating System
308OpenPandora Main OSCoreBug ReportLowWireless Network being dropped asks for passwordUnconfirmed
0%
Release 1 (Zaxxon) Task Description When a Wireless Network that is dropped because its signal strength isn't that good gets reconnected to, I am being asked to re-input the password for that network. It would be nice if it just used the password I gave to it when it was able to connect without popping up that dialog box.
307OpenPandora Main OSCoreFeature RequestMediumChange how Automatic Shutdown worksUnconfirmed
0%
Release 1 (Zaxxon) Task Description When thee Pandora is shutting down because its almost out of power, it should check to make sure that the nub inputs are set to the default mode (which is mouse movement for the left nub and mouse buttons for the right nub). If not, it should change them to be like that.
301OpenPandora Main OSCoreBug ReportMediumMissing X keybinding for colon symbolUnconfirmed
0%
Release 1 (Zaxxon) Task Description As verified with xev, an attached bluetooth keyboard can not generate colon (shift semicolon). xmodmap shows that (unlike a standard Linux system) shift-semicolon is mapped to NoSymbol. While it's find that there's a special symbol to get semicolon on the built-in keyboard, the other binding really should be there in support of attached keyboards.
300OpenPandora Main OSCoreBug ReportLowSuperZaxxon interprets on-disk FAT32 filenames differen...Unconfirmed
0%
Release 1 (Zaxxon) Task Description With SuperZaxxon Final, I've noticed that stuff running on the Pandora like Thunar and bash are seeing a different interpretation of filenames on disk than when I remove the SD card and insert it into my desktop PC. Specifically, the following two mismatches appear to be present when using a FAT32-formatted SD card: First, the Pandora's VFAT support seems to be be operating with different case-handling settings than desktop Linux distros. Filenames set in all uppercase are forced to all-lowercase on the Pandora (whether they're set on the desktop or the Pandora) but inserting the card into a PC reveals that the. All-lowercase filenames set by software on the Pandora risk appearing in all uppercase when the card is inserted into a PC. (I think the grsync PND is what created the files in question) Among other things, this forces me to use EITHER the PND-based copy of grsync over the network OR a desktop-based copy of rsync with an SD card reader but not both because the kernel will preserve case differences like ALBION.BAT vs. albion.bat but rsync think they are separate files. (resulting in Flash-killing, time-wasting deletion and re-creation) It also makes for irritating entries like "zzt" in DOSBox or "ddr" in PyDance where I can't capitalize the filename properly without employing Department of Redundancy Department with "DDR Songs" or "ZZT.The.Game" as an excuse for mixed case. Second, SuperZaxxon Final seems to be using a different (though still Unicode-capable) filename encoding than all the desktop distros I've tried. Filenames are preserved properly and all-ASCII filenames are displayed properly in all cases, but any non-ASCII characters appear as gibberish on whichever system was not used to set them. I've confirmed this problem with these two filenames: - 03 - The Foggy Dew with Sinéad O'Connor.flac - Lucky Star - Native Misao (Touhou - Native Faith) ???????????????????×??????.mp4 As a Canadian user, my desktops use the "en_CA.utf8" locale and the only other distros I've found which have this problem are Slax and the 1.0 release of its successor, Porteus, both of which use ISO-8859-1 (latin1) for filenames.
299OpenPandora Main OSCoreBug ReportLowrun_pnd.sh does not follow PXML.xml or "-d"-ParameterAssigned
0%
Release 1 (Zaxxon) Task Description I call pnd_run.sh with a pnd. The application directory will invariably be /media/SD/pandora/appdata/, no matter if the PXML.xml specifies a different appdata path. Also, the parameter -d for run_pnd.sh is not followed, either. I tried with vlc.pnd from the app store and with Dosbox74.pnd. UPDATE: Original submission contained a wrong filename reference. Corrected that typo to the filename intended by the submitter. Admin: porg.
297OpenPandora Main OSCoreBug ReportLowpandora button and taskbar autohideUnconfirmed
0%
Release 1 (Zaxxon) Task Description When the taskbar is set to autohide, the Pandora button does not bring up the menu anymore.
292OpenPandora Main OSCoreBug ReportLowCan't seek in ogg files using pygame / SDLUnconfirmed
0%
Release 1 (Zaxxon) Task Description Using pygame I try to play a music file starting from some position in the middle:: import pygame pygame.init() pygame.mixer.init() pygame.mixer.music.load('some_file.ogg') pygame.mixer.music.play(0,60) This should start playing the file from the firs minute, instead on the pandora the file plays from the start. I've tried the same code in a debian (sid) chroot (from extend utils) and it works correctly, as it does on my pc (debian wheezy). I suspect that the issue may be present also in .next (I've done a very quick test on a friend's pandora). Some relevant version numbers: * libogg.so.0.6.0 (on debian libogg.so.0.8.0) * libSDL_mixer-1.2.so.0.10.1 (on debian libSDL_mixer-1.2.so.0.12.0)
291OpenPandora Main OSCoreBug ReportMediumroot-owned pndrun_...out file makes PND refuse startingAssigned
0%
Release 1 (Zaxxon) Task Description If a PND has been run as root before (using pnd_run.sh from a root shell) and afterwards it is invoked the normal way, the PND doesn't start, because the .out file cannt be overwritten: /usr/pandora/scripts/pnd_run.sh: line 26: /tmp/pndrun_firefox.out: Permission denied Desired solution: .out file is silently overwitten. Maybe, if that's not possible, create another .out file with a different name (added counter, for example). Seen in SuperZaxxon relese 1.5, not in Beta3 as this task is flagged, but there is no choice besides Beta3.
290OpenPandora Main OSCoreBug ReportMediumgnome-mount not availableUnconfirmed
0%
Release 1 (Zaxxon) Task Description In GTK applications, such as Truecrypt, NoteCase Pro or Mousepad, the file open / file save dialogs have shortcuts to mounted file systems on the left side. If clicking such a shortcut entry, the corresponding file system's contents are shown in the right dialog pane. This works for file systems, which were available at boot time. For file systems mounted after booting, e.g. by inserting an SD card or connecting a USB drive, when clicking such an entry, an error message appears saying "Could not mount [volumen name] Failed to execute child process 'gnome-mount' (No such file or directory)" This is healed by sudo opkg install gnome-mount (which instals gnome-mount, nautilus, gvfsd-ftp, gvfs (upgrade), and a lot of libs (upgrades).. This has been seen in SuperZaxxon release 1.5, not in Beta3 (but Beta3 is the only choice in Flyspray's dropdown currently). I reported that error for HF6 I think, and it seemed to be fixed in SuperZaxxon Beta5. A regression?
288OpenPandora Main OSCoreFeature RequestLowadd functionality to inputrcUnconfirmed
0%
All Task Description Since the default inputrc doesn't contain any functionality (simple cli movements like ctrl-left or crtrl-right to skip words don't work) this diff may be useful to add to the cli-experience. I've also been trying to get the delete-key to work, but this is apparently already a known issue (see FS#227). I can remove this from the diff if you want. (I couldn't attach a file to the task somehow) 31,32c31,33 < # "\e[3~": delete-char < # "\e[2~": quoted-insert --- > #"\e[3~": delete-char > "\e[^?": delete-char > "\e[2~": quoted-insert 44,47c45,50 < # "\e[5C": forward-word < # "\e[5D": backward-word < # "\e\e[C": forward-word < # "\e\e[D": backward-word --- > "\e[1;5C": forward-word > "\e[1;5D": backward-word > "\e[5C": forward-word > "\e[5D": backward-word > "\e\e[C": forward-word > "\e\e[D": backward-word
270OpenPandora Main OSCoreBug ReportVery LowPower-slider & lid-close events: XFCE observes user set...New
0%
Release 1 (Zaxxon) Task Description STATUS QUO: If you are in XFCE and hold the power slider for 3 seconds, you thereby trigger the shutdown command. For 3 more seconds a dialogue box gives you the chance to abort the shutdown ("Shutting down in 3…2…"). Now in MiniMenu no direct shutdown key is available. You first have to quit the running app (via PANDORA key), then call up the menu (via SELECT key), and then navigate to "Shutdown" and confirm it (by B or ENTER). INQUIRED BEHAVIOR: 1) Thanks to the very recent MiniMenu speedups, these 4 consecutive user interaction steps can now at least be be executed a lot faster. Nevertheless, offering a 1-button-interaction (via power slider) too, would be nice. Could you please make that available to MiniMenu? And in general: Make this power-slide-event available to any possible GUI, so that not each GUI has to implement this by itself, but rather the OS catches this event and handles it uniformly, except if a certain GUI WANTS to establish an exception to the rule. 2) Also the "Lid-Close-Settings" seem to be ignored by MiniMenu. MiniMenu seems to have the action "Turn off screen" hardcoded to that event. Please make MiniMenu observe the user settings from "Lid-Close-Settings". RELATED SOURCE CODE FILES (to my knowledge): op_lid.sh op_power.sh op_bright_up.sh op_bright_down.sh
269OpenPandora Main OSCoreBug ReportLowThunar Slow ExitUnconfirmed
0%
Release 1 (Zaxxon) Task Description Thunar takes a long time going back to minimenu on exit. You don't notice this when in XFCE but then you are always in the GUI not returning to it. This started in Hotfix 6 Alpha4 I believe
261OpenPandora Main OSCoreTo Do (Reminder)HighOverview of all current KEYBOARD INPUT related issuesUnconfirmed
0%
Release 1 (Zaxxon) Task Description Built-in keyboard input is a central thing on the Pandora, as it concerns almost all user interfaced apps! I realized that I myself and also others submitted quite many reports concerning this issue. Hence this meta issue is intended as an overview/accumulation/aid for those devs who are willing to overwork the whole issue. If you realize new related issues, feel free to add them here. If this my effort is contradicting the OpenPandora workflow, then pardon me, and instruct me, how else to handle issues of that kind. Thanks! Keyboard low level: Driver, keyboard layout, post processing (hotkeys, input support, etc) FS#138 FS#227 FS#242  FS#259  Keyboard mid level: Application interfacing  FS#102  FS#123 FS#238 Keyboard application internal level  FS#157  (dupe:  FS#249 ) FS#243 FS#256
260OpenPandora Main OSCoreBug ReportMediumLow Power Mode: Input (keyboard, nub) still taken. Appl...Unconfirmed
0%
Release 1 (Zaxxon) Task Description This is the related documentation: http://pandorawiki.org/Power_modes#Low_Power (Please update accordingly as part of the issue resolution) FROM MY USER EXPERIENCE: If you put the Pandora into Low Power Mode, then press some keys, and then wake the Pandora back into Normal Mode, your input (both keys and nubs, haven't tried with USB input yet) seem to have triggered something while the device was in Low Power Mode! What does really happen in Low Power Mode concerning execution and input? a) Input is received AND triggers as application execution continues or b) Kernel/driver queues the input signals into a buffer, and executes them on wake? If supposition a) or b) is true, then this would be one more reason to properly implement:  FS#259  OBSERVANCE EXAMPLE 1: 1) Start MiniMenu. Mentally note down your active tab. 2) Put Pandora to Low Power Mode. 3) Press shoulder button R once. 4) Wake Pandora to Normal Mode. You are now one tab to the right of where you left. Input must have been caught in Low Power Mode, but wether execution of it happened while Low Power Mode or later after wake in Normal power Mode is unclear. OBSERVANCE EXAMPLE 2: 1) Start gedit (a text editor). Insert the digit "1". 2) Put Pandora to Low Power Mode. 3) Press: CTRL-N 2 CTRL-N 3 CTRL-N 4. (Without the spaces) 4) Wake Pandora to Normal Mode. 5) For a fraction of a second you see the tabs building up. Either the input was really received AND executed while Low Power Mode and what you see is just a delayed window manager refreshment, or the input was queued in Low Power Mode, and only executed on wake.
257OpenPandora Main OSCoreBug ReportMediumTV Out script breaks XV/SDL Video playbackUnconfirmed
0%
Release 1 (Zaxxon) Task Description This seems to be the case with Hot-fix 5 and 6 alpha 4. I've been able to repeat this bug by re-flashing.. On a fresh re-flash.. installed community codec pack.. Videos will play fine on Panplayer, VLC and Gnome-Mplayer with default settings, which I believe is XV or SDL out in the case of VLC. Run the TV-out script it will cause a blank black screen during playback.. Disabling TV-out, switching modes, rebooting.. battery out, nothing seems to allows it to work with XV/SDL out again.. I know If I switch to X11 it will make it "work" again, but I notice a bit of lag during playback using X11 compared to XV/SDL out.
252OpenPandora Main OSCoreFeature RequestLowPower management: If power cable is plugged ignore "Shu...New
0%
Release 1 (Zaxxon) Task Description If the power cable is plugged and the user chooses "Shutdown Pandora" from a menu, there should be a warning that this is without purpose, as the device will automatically restart. The resulting user choices should be "Cancel shutdown" and "Shutdown nevertheless".
251OpenPandora Main OSCoreFeature RequestLowSD Mass Storage: Possibility to host multiple volumesUnconfirmed
0%
Release 1 (Zaxxon) Task Description a) Host multiple volumes at once. b) Select one for hosting first, later host additional ones. (I guess this scenario is more complicated)
236OpenPandora Main OSCoreBug ReportLowCannot unmount SD-CardUnconfirmed
0%
Release 1 (Zaxxon) Task Description SD-Card in Pandora can only be unmounted by guest (uid=1000) but not by jgeiss (uid=1001). Steps To Reproduce: Insert SD-Card (or boot with SD-Card inserted), Login as jgeiss (uid=1001), Try to unmount SD-Card via XFCE-Popup-Menu (right mouse click on SD-Card-Icon and select unmount).
229OpenPandora Main OSCoreBug ReportHighEnable wake on alarm interrupts Unconfirmed
0%
All Task Description Found I'd kept some notes about making the Pandora's wake on alarm function work... drivers/rtc/rtc-twl4030.c twl4030_rtc_remove (for when the driver is removed) and twl4030_rtc_ shutdown (for when the system is shutdown) functions need to change. Or at least the shut down does. oh YUK who's been using goto.... changes in drivers/rtc/rtc-twl4030.c twl4030_rtc_remove commented out //mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); twl4030_rtc_shutdown replaced // mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | // BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); with mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); twl4030_rtc_suspend replaced // mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | // BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); with mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); twl4030_rtc_init added (before return!) twl4030_rtc_alarm_irq_set_state(true); Should probably check reg 0x2B with mask 0x08 to see if alarm should be left enabled or not ? but only in twl4030_rtc_shutdown and ?remove? NOT in twl4030_rtc_init should remove ever happen ??? I'm guessing it's best to not enable the alarm irq's all the time???
227OpenPandora Main OSCoreBug ReportLowDelete button won't delete, and function lock doesn't w...Unconfirmed
50%
Release 1 (Zaxxon) Task Description If you hit the function button, then hit it again to lock the function keys, it doesn't lock the function key. The delete key, hold shift and hit the back space button, it won't delete, meaning it won't remove the character to the right of the cursor. I saw this on the forum, and confirmed it on my pandora also.
225OpenPandora Main OSCoreBug ReportMediumads7846 reports odd pressure valuesUnconfirmed
0%
Release 1 (Zaxxon) Task Description using evdev xorg drivers and not the tslib drivers you can receive pressure axis data however there is a problem with the values reported by the ads7846 module and the evdev driver has no calibration property for pressure using xinput test touchscreen you can see the pressure axis ranging from 120-ish for hard press to about 150-170 for light press (low pressure values can be quite erratic) I could possibly hack the evdev module to possibly do something with this odd and narrow range of values, but I rather think looking at the source that the ads7846 module needs some work. is there a git tag that has a known working configuration? as I've had problems getting the kernel to compile the last few times I attempted...
223OpenPandora Main OSCoreBug ReportHighop_power.sh kills gles contextUnconfirmed
0%
Release 1 (Zaxxon) Task Description opengles and op_power.sh don't like each other very much. whenever returning from low power to full power mode again, opengles rendering is just dead. the reason for this issue are following 2 lines within op_power.sh 18 echo 0 > /sys/devices/platform/omapfb/graphics/fb0/blank ... 66 echo 1 > /sys/devices/platform/omapfb/graphics/fb0/blank if these lines are removed/commented, the gles rendering just resumes fine.
210OpenPandora Main OSCoreFeature RequestMediumWader - cross platform graphical assistant for 3g conne...Unconfirmed
0%
Release 1 (Zaxxon) Task Description http://www.wader-project.org http://trac.wader-project.org http://trac.wader-project.org/wiki/Developers this would be really usefull to monitor reception/network of mobile broadband dongle and it also counts ur mobile data usage (for those that have limits).
209OpenPandora Main OSCoreFeature RequestMediumShutdown after a full chargeUnconfirmed
0%
Release 1 (Zaxxon) Task Description That still need to be configurable, but chris_c does a good job I'ld like to see integraded in the main image : http://www.gp32x.com/board/index.php?/topic/58794-a-script-to-shutdown-after-charging/ and : http://chrisc.bedroomcoders.co.uk/?p=77
204OpenPandora Main OSCoreBug ReportMediumfonts issuesUnconfirmed
0%
Release 1 (Zaxxon) Task Description Ok, I just want to say that there is something missing about the font on the base image. I cant get what (at least for now) Here is an issue : http://www.gp32x.com/board/index.php?/topic/54282-getting-vnc-viewer-to-work/ With my current Ogre build I get : Warning: Unable to load any usable ISO8859 font Error: Aborting: no font found I've googled but so far no solution :(
191OpenPandora Development OSCoreBug ReportLowAdd XInput extention to allow pressure sensivity in app...Unconfirmed
0%
Release 2 (.next) Task Description Please see this for GTK apps : http://library.gnome.org/devel/gdk/stable/gdk-Input-Devices.html And see this thread : http://boards.openpandora.org/index.php?/topic/372-xournal-pdf-annotations/page__gopid__6836#entry6836
190OpenPandora Main OSCoreBug ReportMediumRemoving desktop-shortkeys does not workUnconfirmed
0%
Release 1 (Zaxxon) Task Description Try clearing shortcuts in Start->Settings->Window Manager->Keyboard. That doesn't work (for me). This is a problem because these shortcuts are blocking key-combination in apps, like for example the keymapper in dosbox (CTRL+F1) or refreshing content (CTRL+F5). I tried manual editing or even deleting the configuration file, but changes are not recognized and the file recreated on reboot.
185OpenPandora Main OSCoreBug ReportLowXorg driver should not be dependant on user environmentUnconfirmed
0%
Release 1 (Zaxxon) Task Description The patch implementing screen blanking uses the /usr/pandora/scripts/op_lid.sh script to control LCD backlit: http://git.openpandora.org/cgi-bin/gitweb.cgi?p=openembedded.git;a=blob;f=recipes/xorg-driver/xf86-video-omapfb/pandora_backlight_dim.patch;h=4a0b8432d083c6e7297192a2920c7a777ae3d098;hb=16f3fff44323bd6b4349d909667b51a2fef3f278 The same result can be achieved by using the sys interface: /sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/bl_power This approach makes driver independent on particular distribution. The proposed patch is attached.
179OpenPandora Main OSCoreBug ReportLow.vimrc-preset for user but not for rootUnconfirmed
0%
Release 1 (Zaxxon) Task Description I am running PandoraOS from sd-card installed with the official tarball "pandora-rootfs.tar.bz2". I noticed that the control/keyboard-mapping in vi does not work correctly after switching to root (for example sudo su-). I solved this by copying over my users .vimrc to root-homedir. This should already be included in the tarball.
178OpenPandora Main OSCoreBug ReportLowMount-loop when booting from SD-cardUnconfirmed
0%
Release 1 (Zaxxon) Task Description When booting the pandora-OS from sd-card by using the official tar, you will end up with your sd-card being mounted twice: once as / and once as /media/. I solved this by adding "/dev/mmcblk0" to "/etc/udev/mount.blacklist". Maybe this should be added to the default tarball? I'm not sure as it might be used in other ways maybe (beside SD-card-installation)? Background: I ran "updatedb" as root and have been notified by a message that there was a mount-loop. After adding the above modification the system still booted fine and "updatedb" ran nicely without a warning.
155OpenPandora Main OSCoreBug ReportMediumCritical problems after rescaling GLES2 X windowsUnconfirmed
0%
All Task Description When a X window which is displaying GLES2 render output is: - Either dragged out of the visibile screen region (?) - Is made larger than it was at the creation time of the GLES2 context then: - The performance will drop significantly as the EGL buffer swaps won't occur as fast as before, - The render output will be corrupted and flicker - In rare occasions crashes the application or locks up the entire system (which forces you to remove the battery) The problem can not be solved without restarting the application (Possibly forcing players to complete the same goals again as they were unable to reach a savepoint or similar things). This was confirmed in Mupen64Plus and the PowerVR GLES Samples and some of my own projects (which are, however, based on the PowerVR samples). As I didn't see any other reports about this problems (but had it confirmed by other Pandora users too) I would expect that it can be fixed by using a newer X, kernel or combination of them as other OMAP users would be effected too.
148OpenPandora Main OSCoreBug ReportLowadd standard library path to ldconfig.so.conf to help l...Unconfirmed
0%
All Task Description cat >/etc/ld.so.conf
138OpenPandora Main OSCoreBug ReportLow'del' key (shift+backspace) not workingNew
0%
All Task Description The title says everything: The 'del' key does not work. In theory you should have a del "event" when hitting shift+backspace. This is not the case in all progs I tested so far (terminal and default text editor with gui).
110OpenPandora Main OSCoreBug ReportVery LowBattery percentage static in MiniMenuUnconfirmed
0%
All Task Description Battery remaining percentage in MiniMenu does not update unless you change tabs back and forth. This is only really an issue when leaving the unit charging and not using it. It gives the appearance that it is not charging until you swap tabs around.
94OpenPandora Main OSCoreBug ReportLowBacklight control by lid sensor not detected after bootNew
0%
All Task Description If you boot the system with the lid closed, the backlight will still be on when you get to the desktop. You have to lift the lid for an instant and then close again to shut it off. Perhaps this is because of the lack of trigger for an interrupt since the sensor is already activated. Can there be one extra check of the lid sensor after boot to cover this static position?
65OpenPandora Main OSCoreFeature RequestVery Low.desktop files, be nice if they included the non-englis...New
0%
Release 1 (Zaxxon) Task Description .desktop files only include the English stuff right now (using the .desktop default tags.) Be nice if in addition to 'title', we also include 'title[de]' type extras, whatever is in the PXML.xml pnd_pxml_t includes all the goods, but pnd_disco_t has only the summarized english stuff.
12OpenPandora Main OSCoreTo Do (Reminder)Lowfile association for .pndNew
0%
All Task Description Build the xml file and defaults.list so that pnd_run is file-assocated to .pnd
Showing tasks 51 - 87 of 87 Page 2 of 2 - 1 - 2

Available keyboard shortcuts

Tasklist

Task Details

Task Editing