All Projects

IDProjectCategoryTask TypeSeverity  descSummaryStatusProgressOperating System
223OpenPandora Main OSCoreBug ReportHighop_power.sh kills gles contextUnconfirmed
0%
Release 1 (Zaxxon) Task Description opengles and op_power.sh don't like each other very much. whenever returning from low power to full power mode again, opengles rendering is just dead. the reason for this issue are following 2 lines within op_power.sh 18 echo 0 > /sys/devices/platform/omapfb/graphics/fb0/blank ... 66 echo 1 > /sys/devices/platform/omapfb/graphics/fb0/blank if these lines are removed/commented, the gles rendering just resumes fine.
229OpenPandora Main OSCoreBug ReportHighEnable wake on alarm interrupts Unconfirmed
0%
All Task Description Found I'd kept some notes about making the Pandora's wake on alarm function work... drivers/rtc/rtc-twl4030.c twl4030_rtc_remove (for when the driver is removed) and twl4030_rtc_ shutdown (for when the system is shutdown) functions need to change. Or at least the shut down does. oh YUK who's been using goto.... changes in drivers/rtc/rtc-twl4030.c twl4030_rtc_remove commented out //mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); twl4030_rtc_shutdown replaced // mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | // BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); with mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); twl4030_rtc_suspend replaced // mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | // BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); with mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); twl4030_rtc_init added (before return!) twl4030_rtc_alarm_irq_set_state(true); Should probably check reg 0x2B with mask 0x08 to see if alarm should be left enabled or not ? but only in twl4030_rtc_shutdown and ?remove? NOT in twl4030_rtc_init should remove ever happen ??? I'm guessing it's best to not enable the alarm irq's all the time???
261OpenPandora Main OSCoreTo Do (Reminder)HighOverview of all current KEYBOARD INPUT related issuesUnconfirmed
0%
Release 1 (Zaxxon) Task Description Built-in keyboard input is a central thing on the Pandora, as it concerns almost all user interfaced apps! I realized that I myself and also others submitted quite many reports concerning this issue. Hence this meta issue is intended as an overview/accumulation/aid for those devs who are willing to overwork the whole issue. If you realize new related issues, feel free to add them here. If this my effort is contradicting the OpenPandora workflow, then pardon me, and instruct me, how else to handle issues of that kind. Thanks! Keyboard low level: Driver, keyboard layout, post processing (hotkeys, input support, etc) FS#138 FS#227 FS#242  FS#259  Keyboard mid level: Application interfacing  FS#102  FS#123 FS#238 Keyboard application internal level  FS#157  (dupe:  FS#249 ) FS#243 FS#256
121OpenPandora Main OSBase OSBug ReportMediumPyGame Hardware supportNew
0%
All Task Description PyGame is damn slow (games with scrolling are not at all playable). Would be nice if Hardware surface could be used :)
155OpenPandora Main OSCoreBug ReportMediumCritical problems after rescaling GLES2 X windowsUnconfirmed
0%
All Task Description When a X window which is displaying GLES2 render output is: - Either dragged out of the visibile screen region (?) - Is made larger than it was at the creation time of the GLES2 context then: - The performance will drop significantly as the EGL buffer swaps won't occur as fast as before, - The render output will be corrupted and flicker - In rare occasions crashes the application or locks up the entire system (which forces you to remove the battery) The problem can not be solved without restarting the application (Possibly forcing players to complete the same goals again as they were unable to reach a savepoint or similar things). This was confirmed in Mupen64Plus and the PowerVR GLES Samples and some of my own projects (which are, however, based on the PowerVR samples). As I didn't see any other reports about this problems (but had it confirmed by other Pandora users too) I would expect that it can be fixed by using a newer X, kernel or combination of them as other OMAP users would be effected too.
158OpenPandora Main OSBase OSBug ReportMediumRefresh rate and BPPUnconfirmed
0%
Release 1 (Zaxxon) Task Description On OS Zaxon (hotfix 3). With "xfconf-query", the resolution is 800x480@60 Hz. But with the tool in the menu "Settings" -> "Display", the resolution is 800x480@0 Hz. With Java (opensdk-6-jre 6b18-1.8), GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayModes() return 1 display mode that is 800x480@0 Hz with a BPP of -1. It seems to be the reason that GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayMode() return null and when closing a java application that goes in fullscreen mode to throw an exception (invalid display mode).
159OpenPandora Main OSBase OSBug ReportMediumSystem > Run PND Application menu item does nothingUnconfirmed
0%
Release 1 (Zaxxon) Task Description With both Hotfix 3 and Hotfix 4 Beta the Run PND Application menu item fails to do anything. Possibly related problem is that PND files newly copied to SD card are not recognized and entered on desktop as expected. When you go to Thunar and right click - execute the PND file, nothing happens. Possible fix by copying the PND to another folder on the SD card with Thunar. This makes at least two PND files I had work. Still no response with "Run PND Application" menu, though.
190OpenPandora Main OSCoreBug ReportMediumRemoving desktop-shortkeys does not workUnconfirmed
0%
Release 1 (Zaxxon) Task Description Try clearing shortcuts in Start->Settings->Window Manager->Keyboard. That doesn't work (for me). This is a problem because these shortcuts are blocking key-combination in apps, like for example the keymapper in dosbox (CTRL+F1) or refreshing content (CTRL+F5). I tried manual editing or even deleting the configuration file, but changes are not recognized and the file recreated on reboot.
204OpenPandora Main OSCoreBug ReportMediumfonts issuesUnconfirmed
0%
Release 1 (Zaxxon) Task Description Ok, I just want to say that there is something missing about the font on the base image. I cant get what (at least for now) Here is an issue : http://www.gp32x.com/board/index.php?/topic/54282-getting-vnc-viewer-to-work/ With my current Ogre build I get : Warning: Unable to load any usable ISO8859 font Error: Aborting: no font found I've googled but so far no solution :(
209OpenPandora Main OSCoreFeature RequestMediumShutdown after a full chargeUnconfirmed
0%
Release 1 (Zaxxon) Task Description That still need to be configurable, but chris_c does a good job I'ld like to see integraded in the main image : http://www.gp32x.com/board/index.php?/topic/58794-a-script-to-shutdown-after-charging/ and : http://chrisc.bedroomcoders.co.uk/?p=77
210OpenPandora Main OSCoreFeature RequestMediumWader - cross platform graphical assistant for 3g conne...Unconfirmed
0%
Release 1 (Zaxxon) Task Description http://www.wader-project.org http://trac.wader-project.org http://trac.wader-project.org/wiki/Developers this would be really usefull to monitor reception/network of mobile broadband dongle and it also counts ur mobile data usage (for those that have limits).
225OpenPandora Main OSCoreBug ReportMediumads7846 reports odd pressure valuesUnconfirmed
0%
Release 1 (Zaxxon) Task Description using evdev xorg drivers and not the tslib drivers you can receive pressure axis data however there is a problem with the values reported by the ads7846 module and the evdev driver has no calibration property for pressure using xinput test touchscreen you can see the pressure axis ranging from 120-ish for hard press to about 150-170 for light press (low pressure values can be quite erratic) I could possibly hack the evdev module to possibly do something with this odd and narrow range of values, but I rather think looking at the source that the ads7846 module needs some work. is there a git tag that has a known working configuration? as I've had problems getting the kernel to compile the last few times I attempted...
242OpenPandora Main OSApplicationFeature RequestMediumPressing SHIFT + any key in sequence creates the modifi...Unconfirmed
0%
Release 1 (Zaxxon) Task Description ISSUE ENVIRONMENT: If you hold your Pandora in your hands, you only have your thumbs for typing, hence your typing abilities are quite limited. It is hard to press more than 2 keys, and hard to press 2 keys on the same side, as your second thumb does not reach the opposite side all too easy (except you have a basketball player's hands). The modifier keys Start/ALT Select/CTRL Pandora/(META, I guess?) are in the middle of the keyboard, hence the can easily pressed together with another key. But SHIFT lies at an ergonomically problematic side (left boundary). Hence hard to press with other left side keys. SUGGESTED SOLUTION: I suggest that Pandora OS offers an optional and configurable input help. [1|2|3 presses | hold for duration x] SHIFT [timeout y] [modifier key 2] [timeout z] key Produces the same result like SHIFT + modkey2 + key Very likely modifier key 2 and timeout z are not necessary, as you can trigger the SHIFT hold (by your defined action), and then press the modifier key 2 and the other key at once, as the other modifier keys are laid at a central (ergonomically better) position.
243OpenPandora Main OSApplicationFeature RequestMediumMiniMenu: Pressing successive character keys should com...Unconfirmed
0%
Release 1 (Zaxxon) Task Description Imagine this tab content: Nubs, Pandora Input, PNDstore. CURRENT BEHAVIOR: Pressing "P" and "N" is succession jumps to "Nubs" eventually, as it first jumps to the first "P" item ("Pandora Input"), then to the first "N" item, "Nubs". DESIRED BEHAVIOR: That it acts like in most Linux file browsers or the Mac OS X Finder. In detail: Pressing "P" and "N" within a certain time limit should combine them to the string "PN" and jump to the first item which starts with that string, i.e. "PNDStore". If no item matches, reduce the combination string by one character, try to match again, if that doesn't match, try matching again with one character less, ... , until only one character is left, and if that one doesn't match jump to the nearest previous lexicographical character, which matches.
246OpenPandora Main OSApplicationBug ReportMediumClipboard content of closed app gets tossed instead of ...Unconfirmed
0%
Release 1 (Zaxxon) Task Description FLAWED BEHAVIOUR: Copy and paste only works between 2 active applications. This is very limiting! If you are in the single task oriented MiniMenu you have no chance at all to share the clipboard between apps! If you are in the multi tasking oriented XFCE desktop environment you can only share between apps running in parallel! Not with apps which started after the source app has been terminated. DESIRED BEHAVIOUR: The clipboard content (within reasonable limits of course) should remain, regardless of the source application, so that you can paste at any later moment into any application.
250OpenPandora Main OSApplicationFeature RequestMediumFile Browser Thunar - Trashing file crosses filesystem ...Researching
30%
Release 2 (.next) Task Description Trashing a file/folder seems to MOVE it to a certain trash directory on the MAIN VOLUME, rather then the ORIGINATING VOLUME, hence this can result in a COPY RATHER THAN A MOVE operation, if the trashed file originates from a filesystem other than the main filesystem! This is very inefficient and faulty as it is: a) Very time consuming b) And in case of large files this operation can even fail due to not enough free space on the main volume.
253OpenPandora Main OSApplicationFeature RequestMediumSwitch GUI: Intelligent automatic choiceUnconfirmed
0%
Release 1 (Zaxxon) Task Description If only 2 GUIs are available, skip the user selection and switch right into the only other GUI. What else would the user want?! Right! If more than 2, already set the focus in the GUI list to the next possible item.
257OpenPandora Main OSCoreBug ReportMediumTV Out script breaks XV/SDL Video playbackUnconfirmed
0%
Release 1 (Zaxxon) Task Description This seems to be the case with Hot-fix 5 and 6 alpha 4. I've been able to repeat this bug by re-flashing.. On a fresh re-flash.. installed community codec pack.. Videos will play fine on Panplayer, VLC and Gnome-Mplayer with default settings, which I believe is XV or SDL out in the case of VLC. Run the TV-out script it will cause a blank black screen during playback.. Disabling TV-out, switching modes, rebooting.. battery out, nothing seems to allows it to work with XV/SDL out again.. I know If I switch to X11 it will make it "work" again, but I notice a bit of lag during playback using X11 compared to XV/SDL out.
260OpenPandora Main OSCoreBug ReportMediumLow Power Mode: Input (keyboard, nub) still taken. Appl...Unconfirmed
0%
Release 1 (Zaxxon) Task Description This is the related documentation: http://pandorawiki.org/Power_modes#Low_Power (Please update accordingly as part of the issue resolution) FROM MY USER EXPERIENCE: If you put the Pandora into Low Power Mode, then press some keys, and then wake the Pandora back into Normal Mode, your input (both keys and nubs, haven't tried with USB input yet) seem to have triggered something while the device was in Low Power Mode! What does really happen in Low Power Mode concerning execution and input? a) Input is received AND triggers as application execution continues or b) Kernel/driver queues the input signals into a buffer, and executes them on wake? If supposition a) or b) is true, then this would be one more reason to properly implement:  FS#259  OBSERVANCE EXAMPLE 1: 1) Start MiniMenu. Mentally note down your active tab. 2) Put Pandora to Low Power Mode. 3) Press shoulder button R once. 4) Wake Pandora to Normal Mode. You are now one tab to the right of where you left. Input must have been caught in Low Power Mode, but wether execution of it happened while Low Power Mode or later after wake in Normal power Mode is unclear. OBSERVANCE EXAMPLE 2: 1) Start gedit (a text editor). Insert the digit "1". 2) Put Pandora to Low Power Mode. 3) Press: CTRL-N 2 CTRL-N 3 CTRL-N 4. (Without the spaces) 4) Wake Pandora to Normal Mode. 5) For a fraction of a second you see the tabs building up. Either the input was really received AND executed while Low Power Mode and what you see is just a delayed window manager refreshment, or the input was queued in Low Power Mode, and only executed on wake.
262OpenPandora Main OSApplicationBug ReportMediumMiniMenu: 1) "Notes line" cannot be deleted. 2) Note li...Unconfirmed
0%
Release 1 (Zaxxon) Task Description Steps to reproduce the bug(s): 1) In MiniMenu select an arbitrary app. 2) Press SPACE to bring up the contextual menu. 3) Select "Edit notes line 1". 4) Insert your string and confirm. 5) Now at a later time you may decide to remove your note line again. Therefore you select the same app again in MiniMenu, then repeat steps 2-3, but this time: a) Erase all characters so that you get an empty string and then confirm. RESULT: Your change is simply ignored! There should be a possibility within MiniMenu to remove/reset note lines, the simplest being to simply accept an empty string as an input, that's what an average user will try if s/he does not find a dedicated "Delete note line" command. b) As a workaround I tried something and detected yet another bug! As I could not create an empty string, I simply created a note line only containing 1 SPACE character (=the string " ") and confirmed. This got accepted. If MiniMenu is in detailed view mode (press the A-button or TAB in order to bring it up, if it is not already there) and you slide over an app whose note line is " ", MiniMenu crashes! Maybe the bug is connected with the writing to / the parsing from the .OVR (override) files which MiniMenu creates for the affected files, as the separating value in OVR files seems to be TAB, and SPACE is also WHITESPACE, therefore some parsers probably skip/misinterpret this, and MiniMenu then catches an unexpected situation! WORKAROUND: If you ran into the problem, that you cannot get rid of the note lines anymore, simply start a file browser of your choice, navigate to the location of the affected .PND file and find its sister .OVR (override) file and delete it or edit it accordingly!
265OpenPandora Main OSApplicationBug ReportMediumMiniMenu: Flawed tab display of sub-categories if they ...Unconfirmed
0%
Release 1 (Zaxxon) Task Description I assigned personal subcategories to some of my games. Some of those subcategories share the same beginning string, i.e: Shooter, ShooterBallistic ShooterScoller. MiniMenu displays those subcategories with flaws! See the ASCII screenshots below. Note: The star symbols indicate the currently active selection. The main category tab "Game" being active: ---------------------------------------------------------- | All | Audio | AudioVideo | Education |*Game*| Graphics | ---------------------------------------------------------- ActionGame AdventureGame ArcadeGame BlocksGame ... Shooter ShooterBallistic ShooterScroller ... GameA GameB GameC ... ---------------------------------------------------------- Now if I navigate into the sub-category "Shooter", everything normal: ---------------------------------------------------------- |*Shooter*| ---------------------------------------------------------- .. ShooterA ShooterB ShooterC ... ---------------------------------------------------------- But if I navigate to the sub-category "ShooterBallistic", strangely MiniMenu shows 2 tabs, "Shooter" and "ShooterBallistic", and jumps right into "Shooter". ---------------------------------------------------------- |*Shooter*| ShooterBallistic | ---------------------------------------------------------- .. ShooterA ShooterB ShooterC ... ---------------------------------------------------------- In order to reach my intended tab "ShooterBallistic" I need to navigate to it again. Annoying. There the contents are as expected: ---------------------------------------------------------- | Shooter |*ShooterBallistic*| ---------------------------------------------------------- .. ShooterBallisticA ShooterBallisticB ShooterBallisticC ---------------------------------------------------------- The flaw is the same for all other sub-categories beginning with "Shooter...". All have the flaw as shown in the example "ShooterBallistic", only that it is themselves instead of "ShooterBallistic". One more example to be perfectly clear: ---------------------------------------------------------- | Shooter |*ShooterScroller*| ---------------------------------------------------------- .. ShooterScrollerA ShooterScrollerB ShooterScrollerC ----------------------------------------------------------
290OpenPandora Main OSCoreBug ReportMediumgnome-mount not availableUnconfirmed
0%
Release 1 (Zaxxon) Task Description In GTK applications, such as Truecrypt, NoteCase Pro or Mousepad, the file open / file save dialogs have shortcuts to mounted file systems on the left side. If clicking such a shortcut entry, the corresponding file system's contents are shown in the right dialog pane. This works for file systems, which were available at boot time. For file systems mounted after booting, e.g. by inserting an SD card or connecting a USB drive, when clicking such an entry, an error message appears saying "Could not mount [volumen name] Failed to execute child process 'gnome-mount' (No such file or directory)" This is healed by sudo opkg install gnome-mount (which instals gnome-mount, nautilus, gvfsd-ftp, gvfs (upgrade), and a lot of libs (upgrades).. This has been seen in SuperZaxxon release 1.5, not in Beta3 (but Beta3 is the only choice in Flyspray's dropdown currently). I reported that error for HF6 I think, and it seemed to be fixed in SuperZaxxon Beta5. A regression?
291OpenPandora Main OSCoreBug ReportMediumroot-owned pndrun_...out file makes PND refuse startingAssigned
0%
Release 1 (Zaxxon) Task Description If a PND has been run as root before (using pnd_run.sh from a root shell) and afterwards it is invoked the normal way, the PND doesn't start, because the .out file cannt be overwritten: /usr/pandora/scripts/pnd_run.sh: line 26: /tmp/pndrun_firefox.out: Permission denied Desired solution: .out file is silently overwitten. Maybe, if that's not possible, create another .out file with a different name (added counter, for example). Seen in SuperZaxxon relese 1.5, not in Beta3 as this task is flagged, but there is no choice besides Beta3.
301OpenPandora Main OSCoreBug ReportMediumMissing X keybinding for colon symbolUnconfirmed
0%
Release 1 (Zaxxon) Task Description As verified with xev, an attached bluetooth keyboard can not generate colon (shift semicolon). xmodmap shows that (unlike a standard Linux system) shift-semicolon is mapped to NoSymbol. While it's find that there's a special symbol to get semicolon on the built-in keyboard, the other binding really should be there in support of attached keyboards.
307OpenPandora Main OSCoreFeature RequestMediumChange how Automatic Shutdown worksUnconfirmed
0%
Release 1 (Zaxxon) Task Description When thee Pandora is shutting down because its almost out of power, it should check to make sure that the nub inputs are set to the default mode (which is mouse movement for the left nub and mouse buttons for the right nub). If not, it should change them to be like that.
315OpenPandora Main OSCoreBug ReportMediumPairing bluetooth SPP devices doesn't work with XFCEUnconfirmed
0%
Release 1 (Zaxxon) Task Description Hi, sadly the XFCE bluetooth manager seems to have problems with pairing simple SPP devices (an BT GPS mouse here). 1. Enable BT 2. BT Manager -> Add new device 3. Confirm Dialog and wait for scanning 4. Pick device 5. Select PIN options -> "0000" (here for me) In next step the dialog still asks you to enter a random PIN at your BT device (which is impossible here). Thus it seems, that the XFCE dialog makes troubles, I tried it with 2 different GPS. Pairing the GPS manually works fine: sudo rfcomm connect rfcomm0 00:18:E4:26:5F:14
331OpenPandora Main OSCoreBug ReportMediumHold switch key continuously sends X11 KeyPress events ...Unconfirmed
0%
Release 1 (Zaxxon) Task Description

When put into Hold mode, X11 handles the power switch as if it's being pressed, and it generates lots of keypress events, passing them to the foreground application. Since /dev/input/eventX does not seem to continuously trigger, I'm guessing it's due to key repeat.

To reproduce:

  • Install xev and open it in the terminal
  • Put the power key in HOLD mode
  • Notice the "time" value changing rapidly

In addition to causing more work to X, it also floods the active application with key presses, resulting in increased CPU usage. In my test, switching to HOLD while Firefox is in the foreground causes it to use 6% CPU and X an additional 2.5%.

In addition, the key-press events continue even after the switch is taken off HOLD until another key is pressed.

A possible solution to this is to blacklist the power-button event device, to prevent evdev from listening to it (the key is handled by pndevmapperd).

336OpenPandora Main OSCoreBug ReportMediumTouch screen sensitivity too lowUnconfirmed
0%
Release 1 (Zaxxon) Task Description

The touch screen requires to be used with the stylus or another sharp object. Even if I need to click a desktop icon, and could as well use my finger, the touch screen won't react to my finger at all (even if pressed quite hard).

272OpenPandora Development OSBackend / CoreBug ReportMediumkernel 3.2.1 DSS export omapfb update mode functionsUnconfirmed
0%
AllRelease 2 (Yars Revenge) Task Description The update mode functions have moved from the DSS layer to omapfb implementaion. This patch exports the new function symbols for use by the TI drivers. --- a/drivers/video/omap2/omapfb/omapfb-ioctl.c +++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c @@ -22,6 +22,7 @@ #include #include +#include #include #include #include @@ -359,6 +360,7 @@ int omapfb_set_update_mode(struct fb_info *fbi, return r; } +EXPORT_SYMBOL(omapfb_set_update_mode); int omapfb_get_update_mode(struct fb_info *fbi, enum omapfb_update_mode *mode) @@ -381,6 +383,7 @@ int omapfb_get_update_mode(struct fb_info *fbi, return 0; } +EXPORT_SYMBOL(omapfb_get_update_mode); /* XXX this color key handling is a hack... */ static struct omapfb_color_key omapfb_color_keys[2];
273OpenPandora Development OSBackend / CoreBug ReportMediumTI SGX driver package selectionUnconfirmed
0%
AllRelease 2 (Yars Revenge) Task Description The last release of TI Graphics SDK Product to support the 1.0.3 SGX core is 4.04.00.03 The overlay needs to peg the package selection to this version.
274OpenPandora Development OSBackend / CoreBug ReportMediumPatch for TI SGX 4.04.00.03 drivers to compile against ...Unconfirmed
0%
AllRelease 2 (Yars Revenge) Task Description This patch when applied aginst TI 4.04.00.03 SGX drivers will allow building the pvr kernel modules. This relies on task 272 (kernel patch) and should be used inconjuction with task 273 diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_displayclass.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_displayclass.c --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_displayclass.c 2011-06-20 21:03:33.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_displayclass.c 2012-02-09 08:37:21.000000000 +1100 @@ -830,7 +830,11 @@ unsigned long ulLCM; unsigned uiFBDevID = psDevInfo->uiFBDevID; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + console_lock(); +#else acquire_console_sem(); +#endif psLINFBInfo = registered_fb[uiFBDevID]; if (psLINFBInfo == NULL) @@ -972,7 +976,11 @@ ErrorModPut: module_put(psLINFBOwner); ErrorRelSem: +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + console_unlock(); +#else release_console_sem(); +#endif return eError; } @@ -982,7 +990,11 @@ struct fb_info *psLINFBInfo = psDevInfo->psLINFBInfo; struct module *psLINFBOwner; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + console_lock(); +#else acquire_console_sem(); +#endif psLINFBOwner = psLINFBInfo->fbops->owner; @@ -993,7 +1005,11 @@ module_put(psLINFBOwner); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + console_unlock(); +#else release_console_sem(); +#endif } static OMAPLFB_DEVINFO *OMAPLFBInitDev(unsigned uiFBDevID) diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_linux.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_linux.c --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_linux.c 2011-06-20 21:03:33.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/3rdparty/dc_omapfb3_linux/omaplfb_linux.c 2012-02-09 13:14:28.000000000 +1100 @@ -24,11 +24,14 @@ * ******************************************************************************/ + +#include +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif +#endif -#include #include @@ -236,8 +239,11 @@ struct fb_var_screeninfo sFBVar; int res; unsigned long ulYResVirtual; - +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + console_lock(); +#else acquire_console_sem(); +#endif sFBVar = psDevInfo->psLINFBInfo->var; @@ -268,31 +274,37 @@ printk(KERN_INFO DRIVER_PREFIX ": %s: Device %u: fb_pan_display failed (Y Offset: %lu, Error: %d)\n", __FUNCTION__, psDevInfo->uiFBDevID, psBuffer->ulYOffset, res); } } - +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + console_unlock(); +#else release_console_sem(); +#endif } OMAPLFB_UPDATE_MODE OMAPLFBGetUpdateMode(OMAPLFB_DEVINFO *psDevInfo) { struct omap_dss_device *psDSSDev = fb2display(psDevInfo->psLINFBInfo); OMAP_DSS_DRIVER(psDSSDrv, psDSSDev); - - enum omap_dss_update_mode eMode; - - if (psDSSDrv == NULL || psDSSDrv->get_update_mode == NULL) - { - DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Can't get update mode\n", __FUNCTION__, psDevInfo->uiFBDevID)); - return OMAPLFB_UPDATE_MODE_UNDEFINED; + if (psDSSDrv == NULL || psDSSDev == NULL) + { + DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: No DSS device\n", __FUNCTION__, psDevInfo->uiFBDevID)); + } + enum omapfb_update_mode eMode; + + if (!omapfb_get_update_mode(psDevInfo->psLINFBInfo, &eMode)) + { +// DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Can't get update mode\n", __FUNCTION__, psDevInfo->uiFBDevID)); + return OMAPLFB_UPDATE_MODE_AUTO; +// return OMAPLFB_UPDATE_MODE_UNDEFINED; } - eMode = psDSSDrv->get_update_mode(psDSSDev); switch(eMode) { - case OMAP_DSS_UPDATE_AUTO: + case OMAPFB_AUTO_UPDATE: return OMAPLFB_UPDATE_MODE_AUTO; - case OMAP_DSS_UPDATE_MANUAL: + case OMAPFB_MANUAL_UPDATE: return OMAPLFB_UPDATE_MODE_MANUAL; - case OMAP_DSS_UPDATE_DISABLED: + case OMAPFB_UPDATE_DISABLED: return OMAPLFB_UPDATE_MODE_DISABLED; default: DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Unknown update mode (%d)\n", __FUNCTION__, psDevInfo->uiFBDevID, eMode)); @@ -307,10 +319,10 @@ { struct omap_dss_device *psDSSDev = fb2display(psDevInfo->psLINFBInfo); OMAP_DSS_DRIVER(psDSSDrv, psDSSDev); - enum omap_dss_update_mode eDSSMode; + enum omapfb_update_mode eDSSMode; int res; - if (psDSSDrv == NULL || psDSSDrv->set_update_mode == NULL) + if (psDSSDrv == NULL) { DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Can't set update mode\n", __FUNCTION__, psDevInfo->uiFBDevID)); return OMAPLFB_FALSE; @@ -319,20 +331,20 @@ switch(eMode) { case OMAPLFB_UPDATE_MODE_AUTO: - eDSSMode = OMAP_DSS_UPDATE_AUTO; + eDSSMode = OMAPFB_AUTO_UPDATE; break; case OMAPLFB_UPDATE_MODE_MANUAL: - eDSSMode = OMAP_DSS_UPDATE_MANUAL; + eDSSMode = OMAPFB_MANUAL_UPDATE; break; case OMAPLFB_UPDATE_MODE_DISABLED: - eDSSMode = OMAP_DSS_UPDATE_DISABLED; + eDSSMode = OMAPFB_UPDATE_DISABLED; break; default: DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: Unknown update mode (%d)\n", __FUNCTION__, psDevInfo->uiFBDevID, eMode)); return OMAPLFB_FALSE; } - res = psDSSDrv->set_update_mode(psDSSDev, eDSSMode); + res = omapfb_set_update_mode(psDevInfo->psLINFBInfo, eDSSMode); if (res != 0) { DEBUG_PRINTK((KERN_INFO DRIVER_PREFIX ": %s: Device %u: set_update_mode failed (%d)\n", __FUNCTION__, psDevInfo->uiFBDevID, res)); @@ -441,10 +453,17 @@ OMAPLFB_ERROR OMAPLFBUnblankDisplay(OMAPLFB_DEVINFO *psDevInfo) { int res; - +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + console_lock(); +#else acquire_console_sem(); +#endif res = fb_blank(psDevInfo->psLINFBInfo, 0); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + console_unlock(); +#else release_console_sem(); +#endif if (res != 0 && res != -EINVAL) { printk(KERN_WARNING DRIVER_PREFIX @@ -459,9 +478,17 @@ static void OMAPLFBBlankDisplay(OMAPLFB_DEVINFO *psDevInfo) { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + console_lock(); +#else acquire_console_sem(); +#endif fb_blank(psDevInfo->psLINFBInfo, 1); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + console_unlock(); +#else release_console_sem(); +#endif } static void OMAPLFBEarlySuspendHandler(struct early_suspend *h) @@ -692,9 +719,17 @@ flush_workqueue(psDevInfo->psSwapChain->psWorkQueue); } +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + console_lock(); +#else acquire_console_sem(); +#endif ret = fb_blank(psDevInfo->psLINFBInfo, iFBMode); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) + console_unlock(); +#else release_console_sem(); +#endif OMAPLFBCreateSwapChainUnLock(psDevInfo); @@ -717,7 +752,6 @@ static int __init OMAPLFB_Init(void) #endif { - if(OMAPLFBInit() != OMAPLFB_OK) { printk(KERN_WARNING DRIVER_PREFIX ": %s: OMAPLFBInit failed\n", __FUNCTION__); diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/common/resman.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/common/resman.c --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/common/resman.c 2011-06-20 21:03:34.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/common/resman.c 2012-02-09 23:33:43.000000000 +1100 @@ -24,15 +24,17 @@ * ******************************************************************************/ +#include #include "services_headers.h" #include "resman.h" #ifdef __linux__ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif +#endif -#include #include #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,9) #include diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/event.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/event.c --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/event.c 2011-06-20 21:03:34.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/event.c 2012-02-09 09:00:12.000000000 +1100 @@ -24,11 +24,14 @@ * ******************************************************************************/ +#include + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif +#endif -#include #include #include #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22)) diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mmap.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mmap.c --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mmap.c 2011-06-20 21:03:34.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mmap.c 2012-02-09 08:56:41.000000000 +1100 @@ -24,11 +24,14 @@ * ******************************************************************************/ +#include + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif +#endif -#include #include #include #include diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.c --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.c 2011-06-20 21:03:34.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.c 2012-02-09 08:52:48.000000000 +1100 @@ -24,11 +24,14 @@ * ******************************************************************************/ +#include + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif +#endif -#include #include #include #include diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.h b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.h --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.h 2011-06-20 21:03:34.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mm.h 2012-02-09 08:55:49.000000000 +1100 @@ -27,11 +27,14 @@ #ifndef __IMG_LINUX_MM_H__ #define __IMG_LINUX_MM_H__ +#include + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif +#endif -#include #include #include #include diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/module.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/module.c --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/module.c 2011-06-20 21:03:34.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/module.c 2012-02-09 08:59:05.000000000 +1100 @@ -24,9 +24,13 @@ * ******************************************************************************/ +#include + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif +#endif #if !defined(SUPPORT_DRI_DRM) @@ -44,7 +48,6 @@ #include #include #include -#include #include #include diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.c --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.c 2011-06-20 21:03:34.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.c 2012-02-10 00:24:09.000000000 +1100 @@ -24,10 +24,13 @@ * ******************************************************************************/ +#include + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif -#include +#endif #include #include diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h 2011-06-20 21:03:34.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h 2012-02-09 08:54:31.000000000 +1100 @@ -27,11 +27,13 @@ #ifndef __IMG_LINUX_MUTILS_H__ #define __IMG_LINUX_MUTILS_H__ +#include + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif - -#include +#endif #if !(defined(__i386__) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26))) #if defined(SUPPORT_LINUX_X86_PAT) diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/osfunc.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/osfunc.c --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/osfunc.c 2011-06-20 21:03:34.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/osfunc.c 2012-02-09 09:01:16.000000000 +1100 @@ -24,11 +24,14 @@ * ******************************************************************************/ +#include + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif +#endif -#include #include #include #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22)) diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/proc.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/proc.c --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/proc.c 2011-06-20 21:03:34.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/proc.c 2012-02-09 08:57:49.000000000 +1100 @@ -24,13 +24,16 @@ * ******************************************************************************/ +#include + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif +#endif #include #include -#include #include #include #include diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_debug.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_debug.c --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_debug.c 2011-06-20 21:03:34.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_debug.c 2012-02-09 23:54:38.000000000 +1100 @@ -24,9 +24,12 @@ * ******************************************************************************/ +#include +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif +#endif #include #include @@ -72,7 +75,7 @@ static PVRSRV_LINUX_MUTEX gsDebugMutexNonIRQ; -static spinlock_t gsDebugLockIRQ = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(gsDebugLockIRQ); #if !defined (USE_SPIN_LOCK) #define USE_SPIN_LOCK (in_interrupt() || !preemptible()) diff -ru a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_drm.c b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_drm.c --- a/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_drm.c 2011-06-20 21:03:34.000000000 +1000 +++ b/Graphics_SDK_4_04_00_03/GFX_Linux_KM/services4/srvkm/env/linux/pvr_drm.c 2012-02-16 01:58:14.000000000 +1100 @@ -26,14 +26,16 @@ #if defined(SUPPORT_DRI_DRM) +#include +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef AUTOCONF_INCLUDED #include #endif +#endif #include #include #include -#include #include #include #include @@ -371,11 +373,23 @@ .poll = drm_poll, .fasync = drm_fasync, }, +#if (LINUX_VERSION_CODE name = PVR_DRM_NAME, +// .pci->id_table = asPciIdList, +// }, +#endif .name = PVR_DRM_NAME, .desc = PVR_DRM_DESC, @@ -385,6 +399,13 @@ .patchlevel = PVRVERSION_BUILD, }; +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)) +static struct pci_driver pci_pvr_driver = { + .name = PVR_DRM_NAME, + .id_table = asPciIdList, +}; +#endif + static int __init PVRSRVDrmInit(void) { int iRes; @@ -401,7 +422,11 @@ } #endif +#if (LINUX_VERSION_CODE
293OpenPandora Development OSBackend / CoreFeature RequestMediummigration to systemd: populate-volatile.shUnconfirmed
0%
Release 2 (.next) Task Description populating volatile requires execution of initialization script, which I had to minimally modify for it to start working. I am placing that file to /usr/pandora/init/ folder. Any suggestions for better place for custom init scripts? :) This script fixes utmp (and pndnotifyd) problem for systemd image Noticed problems (TODO): boot sequence recreates cache, run and tmp dirs before populate-volatile inits them. One of the solutions would be to deploy system with symlinks already in place (pointing to /var/volatile subdirs) ------------- Deployment: delete: /etc/init.d/populate-volatile.sh /etc/rcS.d/S37populate-volatile.sh /var/{cache,lock,log,run,tmp} add: /etc/systemd/system/populate-volatile.service /usr/pandora/init/populate-volatile.sh symlink: /etc/systemd/system/basic.target.wants/populate-volatile.service to /etc/systemd/system/populate-volatile.service URLs for files: http://dl.dropbox.com/u/18781412/next/populate-volatile.service http://dl.dropbox.com/u/18781412/next/populate-volatile.sh
309OpenPandora Development OSBackend / CoreFeature RequestMediumPlease add xz support in the kernel so squashfs images ...Unconfirmed
0%
Release 1 (Zaxxon) Task Description Please add support for xz compression in the kernel so squashfs tools can compress better the png images.
256Additional ApplicationsApplicationFeature RequestMediumClosed lid apps (i.e. audio recording/playback) should ...Unconfirmed
0%
All Task Description When the lid is closed the only remaining buttons on the Pandora are the L + R shoulder buttons and the power slider. Applications operating in this mode should utilize that few available buttons! Example for button utilization in a audio playback software: L + R at once: Toggle Play/Pause L hold: fast backward R hold: fast forward L click: jump to previous song R click: jump to next song L double click: jump to previous album/artist R double click: jump to next album/artist
12OpenPandora Main OSCoreTo Do (Reminder)Lowfile association for .pndNew
0%
All Task Description Build the xml file and defaults.list so that pnd_run is file-assocated to .pnd
94OpenPandora Main OSCoreBug ReportLowBacklight control by lid sensor not detected after bootNew
0%
All Task Description If you boot the system with the lid closed, the backlight will still be on when you get to the desktop. You have to lift the lid for an instant and then close again to shut it off. Perhaps this is because of the lack of trigger for an interrupt since the sensor is already activated. Can there be one extra check of the lid sensor after boot to cover this static position?
104OpenPandora Main OSBase OSBug ReportLowAAC decoder libfaad doesn't appear to be compiled as fi...Unconfirmed
0%
Release 1 (Zaxxon) Task Description FAAD2 appears to not be compiled with fixed point decoding. My version of libfaad compiled with fixed point used 2-3x less cpu than the provided one. It's not enough to provide the switch to the configure script. the file libfaad/common.h has to be edited and a define uncommented. Line 68 in the v2.7 source. /* COMPILE TIME DEFINITIONS */ /* use double precision */ /* #define USE_DOUBLE_PRECISION */ /* use fixed point reals */ //#define FIXED_POINT
118OpenPandora Main OSBase OSFeature RequestLowadd sdl-perl to the base OSUnconfirmed
0%
Release 1 (Zaxxon) Task Description Hi there, Many games depend on sdl-perl. Perl and sdl are part of the base OS, but not not the connection between the two. Cheers, sebt3
123OpenPandora Main OSBase OSFeature RequestLowSuggestions for the Pandora-ButtonNew
0%
All Task Description My suggestion instead of a full menu, would be to have a tiny overlay over the current running application which allows you to: - relogin (to close all running applications) - quit (stop the active application) - shows the last notifications / toaster messages which you missed while being in a fullscreen app. - possibly even something like plugin support or icons to check out the wifi-strength etc. from fullscreen apps. Implementation wise this could possibly be done using - a topmost window and the same content rendered in screenspace in a GLES hook (which should draw over most applications) or - one of the DSS2 overlays maybe It's definitely something to consider as it was requested on the forums a few times (~"xbox like menu in games").
124OpenPandora Main OSBase OSBug ReportLowifup doesn't like dhclientUnconfirmed
0%
Release 1 (Zaxxon) Task Description I added: iface usb0 inet dhcp And ran: ifup usb0 But dhclient simply prints usage.
135OpenPandora Main OSApplicationBug ReportLowOOM Killer causes loss of items in xfce4-panel configur...Unconfirmed
0%
Release 1 (Zaxxon) Task Description When the Pandora runs out of memory and the Out-Of-Memory killer fires, the Applications/Settings/xfce4/panel/panels.xml loses the entries for the menu button and the power monitor.
138OpenPandora Main OSCoreBug ReportLow'del' key (shift+backspace) not workingNew
0%
All Task Description The title says everything: The 'del' key does not work. In theory you should have a del "event" when hitting shift+backspace. This is not the case in all progs I tested so far (terminal and default text editor with gui).
148OpenPandora Main OSCoreBug ReportLowadd standard library path to ldconfig.so.conf to help l...Unconfirmed
0%
All Task Description cat >/etc/ld.so.conf
178OpenPandora Main OSCoreBug ReportLowMount-loop when booting from SD-cardUnconfirmed
0%
Release 1 (Zaxxon) Task Description When booting the pandora-OS from sd-card by using the official tar, you will end up with your sd-card being mounted twice: once as / and once as /media/. I solved this by adding "/dev/mmcblk0" to "/etc/udev/mount.blacklist". Maybe this should be added to the default tarball? I'm not sure as it might be used in other ways maybe (beside SD-card-installation)? Background: I ran "updatedb" as root and have been notified by a message that there was a mount-loop. After adding the above modification the system still booted fine and "updatedb" ran nicely without a warning.
179OpenPandora Main OSCoreBug ReportLow.vimrc-preset for user but not for rootUnconfirmed
0%
Release 1 (Zaxxon) Task Description I am running PandoraOS from sd-card installed with the official tarball "pandora-rootfs.tar.bz2". I noticed that the control/keyboard-mapping in vi does not work correctly after switching to root (for example sudo su-). I solved this by copying over my users .vimrc to root-homedir. This should already be included in the tarball.
185OpenPandora Main OSCoreBug ReportLowXorg driver should not be dependant on user environmentUnconfirmed
0%
Release 1 (Zaxxon) Task Description The patch implementing screen blanking uses the /usr/pandora/scripts/op_lid.sh script to control LCD backlit: http://git.openpandora.org/cgi-bin/gitweb.cgi?p=openembedded.git;a=blob;f=recipes/xorg-driver/xf86-video-omapfb/pandora_backlight_dim.patch;h=4a0b8432d083c6e7297192a2920c7a777ae3d098;hb=16f3fff44323bd6b4349d909667b51a2fef3f278 The same result can be achieved by using the sys interface: /sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/bl_power This approach makes driver independent on particular distribution. The proposed patch is attached.
216OpenPandora Main OSApplicationTo Do (Reminder)LowToDo - SD manager tool (backup homedir/restore, prepare...New
30%
Release 1 (Zaxxon) Task Description Should make up a simple zenity script tool .. - backup -> pick SD -> backs up current user's homedor to SD. (tar.gz format so permissions can be kept; not cpio/etc, too annoying for user.) -> keep rolling, or just one copy? - restore -> pick SD -> pick user -> confirm -> wipe home and restore with version from tarball? (or just unpack in-place, so existing new files are kept) -> prepare SD -> pick SD -> mkdir /pandora/menu and /pandora/desktop
217OpenPandora Main OSApplicationFeature RequestLowAdd Mounting and unmounting context options for PND'sUnconfirmed
0%
Release 1 (Zaxxon) Task Description It'll have to be in the SKEL. /etc/skel/Applications/Settings/Thunar/uca.xml People can replace the contents of their current uca.xml file with the following to gain this functionality now. /home/[USERNAME]/Applications/Settings/Thunar/uca.xml Terminal Open Terminal Here exo-open --working-directory %f --launch TerminalEmulator Example for a custom action * emblem-symbolic-link Mount PND /usr/pandora/scripts/pnd_run.sh -p %f -m && thunar /mnt/utmp/ *.pnd;*.PND gtk-jump-to-rtl Unmount PND /usr/pandora/scripts/pnd_run.sh -p %f -u *.pnd;*.PND
222OpenPandora Main OSApplicationBug ReportLowLogin Screen does not accept all symbols of the form Fn...Unconfirmed
0%
Release 1 (Zaxxon) Task Description Problem - Login Screen does not accept all symbols of the form Fn+char Reproducibility - always Actual results - the characters :?#|$€"‘£¥@!_ do not work on the Login Screen with the Pandora's keyboard. When fn then the corresponding character is pressed, nothing is added to the string. Expected results - these characters should appear just like any other character Work Around - an external keyboard was able to enter these characters Aditional Information - While the characters :?#|$€"‘£¥@!_ do not work, the characters ;/\'-+=`() work just fine.
227OpenPandora Main OSCoreBug ReportLowDelete button won't delete, and function lock doesn't w...Unconfirmed
50%
Release 1 (Zaxxon) Task Description If you hit the function button, then hit it again to lock the function keys, it doesn't lock the function key. The delete key, hold shift and hit the back space button, it won't delete, meaning it won't remove the character to the right of the cursor. I saw this on the forum, and confirmed it on my pandora also.
Showing tasks 1 - 50 of 87 Page 1 of 21 - 2 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing