- Status Closed
- Percent Complete
- Task Type Bug Report
- Category Core
- Operating System Release 1 (Zaxxon)
- Severity Medium
- Reported Version SuperZaxxon Final 1.53
Attached to Project: OpenPandora Main OS
Opened by Stefan Nowak - 01.05.2013
Last edited by Michael Mrozek - 06.05.2013
Opened by Stefan Nowak - 01.05.2013
Last edited by Michael Mrozek - 06.05.2013
FS#317 - After disabling USB-host current still flows into USB device! Proof: device status LED still on
On my Pandora, due to bad internal WiFi, I use an Edimax EW-7811Un USB WiFi adapter, which has a status-LED, flickering according to the network activity.
After disabling USB-host through the settings menu, the WiFi functionality is gone, but the device's LED is still on. So some current must still flow into the USB device.
The LED now has a permanent light, no flickering! This lack of "device intelligence" indicates that the device was indeed turned off, just current flowing directly to the LED circuit unaltered).
I can repeat the aforementioned steps many times, the behavior is the same.
As soon as I then first physically unplug and reinsert the device, the LED remains off eventually.
From then on, every further issuing of "Disable USB-host" through the settings menu turns the device LED completely off.
Smells like a kernel bug to me! As it requires one real un/re-plugging, from then on works ok.
Closed by Michael Mrozek
06.05.2013 01:00
Reason for closing: Not a bug
Additional comments about closing: Disabling the USB port only disables the driver chip to save power. It can not cut the hardware power traces to the port.
06.05.2013 01:00
Reason for closing: Not a bug
Additional comments about closing: Disabling the USB port only disables the driver chip to save power. It can not cut the hardware power traces to the port.
FS#271) I cannot upload my carefully prepared graph with the aligned inline event log, so I suggest we follow up over at the forums: http://boards.openpandora.org/index.php/topic/12948-after-disabling-usb-host-current-still-flows-into-usb-device-proof-device-status-led-still-on-bug-report/